Benutzeranleitung / Produktwartung CA-HXZ98V des Produzenten JVC
Zur Seite of 54
GVT0096-003A [US, UN, UX] INSTRUCTIONS CA-HXZ9V/CA-HXZ98V CA-HXZ7V For Customer Use: Enter below the Model No . and Serial No. which are located either on the rear , bot- tom or side of the cabinet. Retain this inf or mation f or future reference . Model No .
Caution— (STANDBY/ON) button! Disconnect the mains plug to shut the power off completely. The (standby/on) button in any position does not disconnect the mains line. The power can be remote controlled. – G-1 – W arnings, Cautions and Others Safety.
CAUTION T o reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. CAUTION • Do not block the ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc.
Caution: Proper V entilation T o avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: 1 Fron t: No obstructions and open spacing. 2 Sides/ T op/ Back: No obstructions should be placed in the areas shown by the dimensions below .
IMPORTANT FOR LASER PRODUCTS REPRODUCTION OF LABELS / / 1 1 1 1 1 CLASSIFICATION LABEL ON EXTERIOR SURFACE 2 WARNING LABEL INSIDE THE UNIT 1. CLASS 1 LASER PRODUCT 2. DANGER: Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.
– 1 – English Introduction About This Manual This manual is org anized as follows: • The manual mainly explains operations using the b uttons and controls on the unit. Y ou can also use the b uttons on the remote control if they ha ve the same or similar names (or marks) as those on the unit.
– 2 – English Contents Location of the Buttons and Controls ....................... 3 Front Panel ................................................................. 3 Remote Control .......................................................... 5 Getting Started .
– 3 – English Location of the Buttons and Controls Become familiar with the b uttons and controls on your unit. Front Panel Front Panel T op view of Indication-lamp panel p V O L U M E Note: All illustrations in this manual will be based on CA-HXZ9V/CA-HXZ98V .
– 4 – English Continued Display Window See pages in the parentheses for details. Front Panel 1 Disc trays 2 (standby/on) button and lamp (9, 12, 31, 32) 3 ECO (Ecology) b utton (9) 4 Remote sensor 5 Display windo w 6 FM/AM b utton (9, 13) Pr essing this button also turns on the unit.
– 5 – English When using the remote control, point it at the remote sensor on the front panel. Remote Control Remote Control 1 Number buttons (13, 17 – 18, 22, 24) 2 VIDEO INTR O button (24) 3 ON SCREEN button (23) 4 PREV .
– 6 – English Getting Started Supplied Accessories Make sure that you have all the following items. The number in the parentheses indicates the quantity of the pieces supplied.
– 7 – English 1 If cords are co ver ed with insulation, twist the core of the cor d at the end of each cord, then r emove the insulation. 2 Connect the AM loop antenna to the AM LOOP terminals as illustrated. 3 T urn the AM loop antenna until y ou ha ve the best r eception.
– 8 – English T o connect surround speakers By connecting surround speakers to the SURR OUND SPEAKERS jacks you can enjoy surround ef fect. • Connect the right surround speaker to the RIGHT jack. • Connect the left surround speaker to the LEFT jack.
– 9 – English Common Operations T urning On or Off the Power T o turn on the unit, press (or ST ANDBY/ON on the remote control) so that the lamp on the b utton goes off. T o turn off the unit (on standby), press (or ST ANDBY/ON on the remote control) again so that the lamp on the b utton lights up.
– 10 – English Continued FADE MUTING V O L U M E VOLUME Adjusting the V olume Y ou can adjust the volume le vel only while the unit is turned on. The v olume lev el can be adjusted in 32 steps (V OLUME MIN, V OLUME 1 – V OLUME 30, and V OLUME MAX).
– 11 – English Selecting the Sound Modes Y ou can select one of the 6 preset sound modes (3 surround modes and 3 SEA—Sound Ef fect Amplifier—modes) and 3 user modes. This function only af fects the playback sound, but does not af fect your recording.
– 12 – English Creating Y our Own Sound Mode — User Mode Y ou can change SEA (Sound Effect Amplif ier) pattern to suit your preference. The SEA (Sound Ef fect Amplifier) pattern can be adjusted into 5 frequency ranges—LO W1, LO W2, MID, HIGH1, and HIGH2.
– 13 – English Listening to FM and AM Broadcasts T uning in to a Station 1 Pr ess FM/AM. The unit automatically turns on and tunes in to the previously recei v ed station (either FM or AM). • Each time you press the button, the band alternates between FM and AM.
– 14 – English This unit has been designed to play back the follo wing discs: • CD (Audio CD) • CD-R (CD-Recordable) • CD-R W (CD-ReWritable) • MP3 disc (MP3 f iles recorded on a CD-R or C.
– 15 – English How are MP3 files recorded and played back? MP3 “tracks (files)” can be r ecorded in “group”—folders or directories, in PC terminology . During recording, the tracks and groups can be arranged similarly to the tracks and folders/directories of computer data.
– 16 – English Playing Back Discs Loading Discs On the unit ONL Y : 1 Pr ess 0 for the disc tray (CD1, CD2, or CD3) y ou want to load a disc onto. The unit automatically turns on and the disc tray comes out. 2 Place a disc correctl y on the circle of the disc tray , with its label side up.
– 17 – English 3 Select a track to start playing with. 1) Tu r n 4 / ¢ (or press PREV . 4 ( 1 ) / NEXT ¢ ( ¡ ) on the remote control) to select a group you want, then press CD 3 / 8 SELECT . The track number starts flashing. 2) Tu r n 4 / ¢ (or press PREV .
– 18 – English 4 Select a track fr om the selected disc in step 3 . On the unit: Tu r n 4 / ¢ to select the track number , then pr ess SET/DISPLA Y . On the r emote contr ol: Press the number b uttons. • For ho w to use the number buttons, see “T o go to another track directly using the number buttons” on pa ge 17.
– 19 – English Playing at Random—Random Play The tracks of the currently selected disc will be played at random. • T o use Repeat Play (see page 20) for Random Play , press REPEA T after starting Random Play . Only REPEA T 1 and REPEA T ALL can be selected for Random Play .
– 20 – English Prohibiting Disc Ejection—T ray Lock Y ou can prohibit disc ejection fr om the unit and lock discs. • This operation is possible only when the source is the CD player . On the unit ONL Y : T o prohibit disc ejection, press 0 for an y disc tra y while holding down 7 .
– 21 – English Playing Back Video CDs Selecting Video Output (P AL, MUL TI, NTSC) Y ou can set this setting in Standby mode. (W ait for 2 second after the clock timer appear .) Before playing a VCD, use the buttons on the unit to select a video output mode to match your TV system.
– 22 – English Playing Video CDs with PBC Function — Menu Play This System provides Playback Control (PBC) which utilizes a procedure (menu selection) programmed in a video CD. The playback operation procedure may dif fer depending on the disc you use.
– 23 – English Screen-sa ver • When a menu screen of a karaoke disc is displayed for a fe w minutes without any selection being made, it automatically starts from the first song . Do not paused V ideo CD for more then 10 minutes to prevent scr een burns.
– 24 – English 2 Pr ess VIDEO INTR O on the remote contr ol after a picture appears on the TV scr een. The video intro play starts and sho ws in sequence for about 7 seconds of the first nine tr acks on the TV screen. T o previe w subsequent tracks, press “NEXT ¢ ( ¡ )” on the remote control.
– 25 – English Y ou can play back type I tapes without changing any settings. Playing Back a T ape 1 Pr ess 0 EJECT for the cassette deck. 2 Insert a cassette with the exposed part of the tape down. 3 Close the cassette holder gently . 4 Pr ess T APE 2 3 .
– 26 – English Recording Recording on a T ape 1 Press 0 EJECT and insert a recordable cassette with the exposed part of the tape do wn. 2 Close the cassette holder gently . • If you want to record on both sides of a tape, see “T o record on both sides—Rev erse Mode.
– 27 – English Synchronized Recording By using Synchronized Recording methods, you can start and stop both disc play and tape recording at the same time. 7 Direct Recording Everything on the disc goes onto the tape in the order on the disc, or according to the order you ha ve made for Program Play .
– 28 – English Using the Microphones Y ou can enjoy singing along (Karaoke) and microphone mixing by using two microphones. • MIC LEVEL adjustment is v alid for both microphones connected to MIC 1 and MIC 2 jacks. IMPOR T ANT : • Always set MIC LEVEL to MIN when connecting or disconnecting the micr ophone.
– 29 – English 5 Rotate MIC LEVEL and V OLUME to adjust the micr ophone level and the speak er output le vel. 6 Sing into the micr ophone. T o apply echo to your v oice, see “T o apply an echo to your voice” on pa ge 28. T o adjust the music key , see “ Adjusting the Music Key Control” on this page.
– 30 – English Using the T imers There are three timers av ailable—D AIL Y (Daily T imer), REC (Recording T imer), and SLEEP (Sleep T imer). Y ou can set the timers whether the unit is on or off; ho wever , if Ecology Mode is acti vated, you cannot set the timers while the unit is of f.
– 31 – English 4 Set the off-time y ou want the unit to turn off (on standby) at. 1) Tu r n 4 / ¢ to set the hour , then press SET/DISPLA Y . 2) Tu r n 4 / ¢ to set the minute, then press SET/DISPLA Y . “SET” appears for 1 second, then the unit enters source selecting mode.
– 32 – English 4 Set the on-time y ou want the unit to turn on at. 1) Tu r n 4 / ¢ to set the hour, then press SET/DISPLA Y . 2) Tu r n 4 / ¢ to set the minute, then press SET/DISPLA Y . “SET” appears for 1 second, then the unit enters of f-time setting mode.
– 33 – English SLEEP 10 SLEEP 60 SLEEP 30 SLEEP 20 Canceled SLEEP 120 SLEEP 90 T o turn on or off Recording T imer after its setting is done 1 Press CLOCK/TIMER r epeatedly until “REC” appears on the display . The REC (Recording T imer) indicator starts flashing on the display and the (T imer) indicator remains lit.
– 34 – English Maintenance T o get the best performance of the unit, keep your discs, tapes, and mechanism clean. Handling cassette tapes • If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating.
– 35 – English If you are ha ving a problem with y our unit, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints gi ven here, or the unit has been physically damaged, call a qualif ied person, such as your dealer , for service.
– 36 – English Specifications CA-HXZ7V Amplifier section Output Power (IEC 268-3) MAIN SPEAKERS: 100 W per channel, min. RMS, both channels driven into 6 Ω at 1 kHz with no more than 0.9% total harmonic distortion. Audio input sensitivity/Impedance: (Measured at 1 kHz, with tape recording signal 300 mV) AUX: 390 mV/50 k Ω ΜΙΧ 1/2: 1.
0203JALFLEJEM EN, CS, AR VICT OR COMP ANY OF JA P AN, LIMITED FM Mains (AC) Line Instruction (not applicable for Europe, U.S.A., Canada, Australia, and U.
INSTR UCTIONS GVT0108-001A [U/UN] Thank you f or purchasing JVC speakers. Bef ore you begin using them, please read the instructions carefully to be sure you get the best possib le performance. If you ha ve an y questions, consult y our JVC dealer . Le estamos muy agr adecidos por haber adquir ido estos alta voces de JVC .
.
3 SPEAKER FOR A/V COMBINA TION SP-XZ9V has a magnetically-shielded design f or placement adjacent to TV ’ s and monitors without causing color aberrations. Howe ver , color ma y be affected as a result of how the speak er system is installed. Therefore , be careful of the follo wing: 1.
4 Main Speaker (Right Side) Altav oz pr incipal (Lado derecho) Alto-falante principal (Lado direito) ! ! Main Speaker (Left Side) Altav oz pr incipal (Lado izquierdo) Alto-falante princi.
5 CONEXIÓN • NO utilice ningún otro amplificador para operar este sistema de altav oces excepto CA-HXZ9. • Desactive la alimentación de todo el sistema antes de conectar los altav oces al amplificador . • La capacidad máxima de potencia del altavoz principal es de 50 W , y del Subwoof er es de 200 W .
6 • !"#$%&'( =`^JeuwV= !"#$%& • !"#$%&'"()*+,-./012345 • !"#$%&'()*+ = RM= t !"#$%&'( OMM=t !"#$%&'()*+,-.'/0123.
7 SURR OUND SPEAKER SYSTEM HO W T O INST ALL SURROUND SPEAKERS • This equipment is not magnet-proof . If it is placed near a TV set, color on a TV screen may become une ven. If the case of installation, theref ore, locate it at sufficient distance from the TV set.
8 SURROUND SPEAKERS CONNECTION A pin plug is attached to the tip of the speak er cord. If the speaker connection terminal on the amplifier to which the speaker is to be connected is a pin jac k, connect the left-hand speaker ’ s lead to the left terminal, and the right-hand speaker ’ s lead to the right ter- minal.
9 CONEXIÓN Una clavija monopolar está fijada al e xtremo del cordón del altavoz. Si el terminal de conexión para alta voz en el amplificador al cual se conectará el altav oz es un jack monopolar , conecte el cable del altav oz izquierdo al ter minal izquierdo , y el cable de altav oz derecho al terminal derecho.
10 !"#$%&'()'$*+,-. /01234 !"#$%&'()'*+,-. !/0"#1-$ !"#$%&'()*!+, • !"#$%&'"()*+,-.
.
12 VICTOR COMPANY OF JAPAN, LIMITED EN. SP . PR. CH. AR. 0103FSKMAMFPI.
Ein wichtiger Punkt beim Kauf des Geräts JVC CA-HXZ98V (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC CA-HXZ98V noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC CA-HXZ98V - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC CA-HXZ98V reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC CA-HXZ98V erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC CA-HXZ98V besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC CA-HXZ98V verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC CA-HXZ98V. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC CA-HXZ98V gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
