Benutzeranleitung / Produktwartung AV-27F803 des Produzenten JVC
Zur Seite of 56
COLOR TELEVISION USER'S GUIDE For models: AV -36F803 AV -36F713 AV -36F703 AV -32F803 AV -32F713 AV -32F703 AV -27F803 AV -27F713 AV -27F703 TM Illustration of A V -27F803 and RM-C325G IMPORT ANT.
IMPOR T ANT SAFETY PRECA UTIONS W ARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS TV SET TO RAIN OR MOISTURE. CA UTION: TO INSURE PERSONAL SAFETY , OBSER VE THE FOLLO WING RULES REGARDING THE USE OF THIS UNIT . 1. Operate only from the pow er source specified on the unit.
IMPORT ANT SAFEGU ARDS CA UTION: Please read and retain for y our safety . Electrical energy can perform many useful functions. This TV set has been engineered and manuf actured to assure your personal safety . But improper use can result in potential electrical shock or fire hazards .
7 An outside antenna system should not be located in the vicinity of ov erhead power lines or other electric light or power circuits, or where it can f all into such power lines or circuits.
13 F or added protection of the TV set during a lightning stor m or when the TV set is to be left unattended for an e xtended period of time, unplug it from the wall outlet and disconnect the antenna. This will prev ent damage to product due to lightning storms or power line surges.
Ta b le of Contents UNP ACKING Y OUR TV . ....7 TV Models and Remote Controls . .......8 Quick Setup Guide . ......1 0 Connections . .........1 3 Cable and VCR Connections . ......1 3 Connecting to a D VD Play er . .......1 6 Connecting to an External Amplifier .
Tw o AA Batteries 1 T elevision 1 Remote Control Thank you f or your purchase of a JVC Color T elevision. Before y ou begin setting up your new television, please chec k to make sure you ha ve all of the follo wing items.
TV Models and Remotes Guide NO TE: Before you connect y our televison to another device , please refer to the proper dia- gr ams for y our TV and remote , depending on the model that you hav e purchased.
TV Models and Remotes Guide Remote Control RM-C325G MODELS: AV -36F803, A V -32F803 and AV -27F803 POWER VIDEO STATUS SLEEP TIMER LIGHT BBE CHANNEL DISPLAY SOURCE FREEZE PIP SWAP ON/MOVE EZ SURF 1 7 4.
10 Getting Started These quick setup pages will pro vide you, in three easy steps , with the basic inf ormation you need to begin using your ne w television right awa y .
INPUT 4 S VIDEO VIDEO INPUT 1 R L MONO AUDIO OVER R L MONO R L 75Ω (VHF / UHF) AUDIO COMPONENT VIDEO COMPONENT VIDEO Y P B P R AV COMPULINK AUDIO OUT INPUT 2 WALL CABLE or ANTENNA OUT 11 Cable/RF connector AV Cables/Plugs Step T wo - Making Basic Connections Next y ou will need to connect your television to an antenna or cab le system.
12 Press the b utton to mo ve to A UT O TUNER SETUP ¥ To choose CABLE (if y ou are connected to a cable system) or AIR (if y ou use an antenna) or SKIP (if you need to) To m o v e to ST ART The A uto T uner will now memorize all of the clear , active channels y our tele vision can receive .
INPUT 4 S VIDEO VIDEO INPUT 1 R L MONO AUDIO OVER R L MONO R L 75Ω (VHF / UHF) AUDIO COMPONENT VIDEO COMPONENT VIDEO Y P B P R AV COMPULINK AUDIO OUT INPUT 2 CABLE or ANTENNA OUT OR OR TWO-WA Y SPLI.
INPUT 4 S VIDEO VIDEO INPUT 1 R L MONO AUDIO OVER R L MONO R L 75Ω (VHF / UHF) AUDIO COMPONENT VIDEO COMPONENT VIDEO Y P B P R AV COMPULINK AUDIO OUT INPUT 2 CABLE or ANTENNA OUT OR OR IN OUT VCR VL.
INPUT 4 S VIDEO VIDEO INPUT 1 R L MONO AUDIO OVER R L MONO R L 75Ω (VHF / UHF) AUDIO COMPONENT VIDEO COMPONENT VIDEO Y P B P R AV COMPULINK AUDIO OUT INPUT 2 WALL CABLE or ANTENNA OUT OR OR TWO-WA Y.
Connections 16 1) Connect Green cable out from D VD player “Y” Component Output, in to TV “Y” Component Input. 2) Connect Blue cab le out from D VD pla yer “P B ” Component Output, in to TV “P B ” Component Input. 3) Connect Red cab le out from D VD Pla yer “P R ” Component Output, in to TV “P R ” Component Input.
INPUT 4 S VIDEO VIDEO INPUT 1 R L MONO AUDIO OVER R L MONO R L 75Ω (VHF / UHF) AUDIO COMPONENT VIDEO COMPONENT VIDEO Y P B P R AV COMPULINK AUDIO OUT INPUT 2 LEFT FRONT SPEAKER RIGHT FRONT SPEAKER A.
Connections 18 To Connect: Plug one end of the A V Compu Link cable into the A V Compu Link input on your VCR, D VD , or other Compu Link de vice. Plug the other end of the A V Compu Link cable into the A V Compu Link input at the rear of the tele vision.
Remote Contr ol • Bef ore you can oper ate the remote control, you must first install the batteries (included). See “Changing the Batteries” at the bottom of this page for instructions. (F or an illustration, please see page 10.) • Press the P O WER b utton to tur n the television on or off .
Remote Pr ogramming Setting the CA TV , VCR and D VD Codes Y ou can program your remote to oper ate your cab le box, satellite receiver , VCR or D VD play er by using the instructions and codes listed below .
Remote Pr ogramming Admiral Aiwa Akai Audio Dynamic Bell & Howell Broksonic Canon CCE Citizen Craig Curtis Mathes Daewoo DBX Dimensia Emerson Fisher Funai G.
Remote Pr ogramming 22 D VD codes Aiwa Apex Denon Hitachi JVC Kenwood Konka Mitsubishi Onkyo Oritron Panasonic Philips Pioneer 043 040 020, 037 030, 031 000 035 039 025 041 044 020 023, 036 022 D VD P.
To bring up the onscreen menu , press the M ENU b utton on the remote control. The item that appears in yello w is the one currently selected. If you press the M ENU b utton again, the onscreen display will skip to the ne xt menu screen.
Onscreen Menus 24 The Onscreen Menu System Y our television comes with JVC’ s Onscreen Menu System. The Onscreen Menus let you mak e adjustments to your tele vision’s oper ation simply and quickly . Examples of the Onscreen Men us are shown below and on the ne xt page.
Plug In Menu The Plug In Menu comes up automatically when you first turn on the TV after plugging it in. The Plug In Menu helps you to get y our TV ready to use b y letting you set your pref erences f.
Plug In Menu 26 A uto Clock Set Before y ou use any of your TV’ s timer functions, you must first set the cloc k. Y ou may precisely set your cloc k using the XDS time signal broadcast by most Public Broadcasting stations.
Plug In Menu 27 Manual Cloc k Set NO TE: Y ou will hav e to reset the clock after a po wer interruption. Y ou must set the clock bef ore operat- ing any timer functions. To set y our clock manually (without using the XDS signal), choose MANU AL from the Set Clock menu and f ollow the steps below .
Channel Summary Channel Summary Channel Summary allows you to customize the line-up of channels receiv ed by your TV . Y ou can add or delete channels from the line-up or prev ent any unauthorized viewers from w atching any or all 181 channels.
29 V -Chip Y our TV is equipped with V -Chip technology which enables TV P arental Guidelines (for United States and Canada) and Movie (MP AA) Guideline controls. V -Chip technology allows you to program y our TV to receive, or not to receiv e, programs based on content according to the guidelines.
30 V -Chip US V -Chip Ratings U .S. P ARENT AL RA TING SYSTEMS Programs with the f ollowing ratings are appropriate for c hildren. ❒ TV Y is Appropriate for All Children. Programs are created f or very young viewers and should be suitab le for all ages, including children ages 2 - 6.
V -Chip 31 Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV , S, etc.) and press the or to mov e the cursor to the correct location. Press ¥ or to turn the locking f eature on or off . An item is locked if the icon appears instead of a “—”.
V -Chip 32 Setting ratings with the V -Chip b utton Example 2: If you w ant to set your V -Chip settings to bloc k all programming abov e a current setting such as TV PG-V (with violence): Press Z ERO when TV -PG - V is displayed All Programming abo ve TV -PG - V (with Violence) will be bloc ked.
V -Chip ❒ NR - Not Rated. This is a film which has no rating. In many cases these films were imported from countr ies which do not use the MP AA ratings system. Other NR films ma y be from amateur producers who didn’t intend to hav e their film widely released.
V -Chip ❒ E - Exempt. Exempt prog ramming includes: ne ws, spor ts, documentaries and other information programming, talk sho ws, music videos , and variety programming. ❒ C – Programming Intended f or Children. Violence Guidelines: There will be no realistic scenes of violence.
35 V -Chip Unrated Programs Notes About Unrated Programs: Unrated programming ref ers to any programming which does not contain a r ating signal. Programming on tele vision stations which do not broadcast rating signals will be placed in the “Unrated Programming" category .
36 V -Chip Set Lock Code Channel Guard and V -Chip settings are protected by a f our-digit Lock Code. Y our TV comes pre-set with a Lock Code of "0000". Y ou may change the code to an y four-digit n umber you wish. T o change the Lock Code, f ollow the steps below .
37 Picture Settings Tint Color Picture Bright Detail Tint allows y ou to adjust the lev els of red and green in your TV picture. Press the M ENU bu tton To TINT To increase the le vels of .
Picture Settings 38 Noise Muting This feature inserts a blank blue screen o ver channels which are not broadcasting or are too w eak to be receiv ed clearly . Press the M ENU bu tton To NOISE MUTING ¥ To turn Noise Muting ON or OFF • Noise Muting will not work during Auto T uner Setup or when you operate Channel Summary .
39 Sound Settings Y ou can increase or decrease the lev el of low-frequency sound in the TV’s audio with the Bass adjustment. Press the M ENU bu tton To BASS To increase the bass ¥ To decrease the bass To mo ve to the next setting Use T reble to adjust the lev el of high-frequency sound in your TV’ s audio .
40 General Items The On/Off timer lets you progr am your television to turn itself on or off. Y ou can use it as an alarm to wake up , to help you remember impor tant programs, or as a deco y when you're not home.
General Items Many broadcasts now include an onscreen displa y of dialog called Closed Captions. Some broadcasts may also include displa ys of additional information in text f or m. Y our television can access and display this inf or mation using the Closed Caption feature .
Get the best quality video from your D VD play er by using this setting and the D VD inputs at the rear of the television. Set either to YES for component input (f or D VD) or to NO for composite video input (for a regular VCR), using V2 COMPONENT -IN.
Button Functions 43 The M ENU b utton allo ws you to access JVC’ s onscreen menu system. Press M ENU to activate the onscreen menu system. • See individual topics (like “Sound Settings) for specific inf or mation on using menus. Press the E XIT b utton to lea ve a menu screen.
Button Functions 44 Video Status Sleep Timer Hyper Surround Muting The V IDEO S TA TUS b utton giv es you a choice of three TV picture display settings, including a display of y our own preferences . Standard - Resets the picture displa y to the factory settings.
Button Functions 45 Use the 100+ button to directly access channels abo ve Channel 99. F or example to mov e to channel 124, press100+, 2 (two), 4 (f our). 100+ Button Return+ Input Selects the signal input source for the tele vision: TV (f or Antenna or Cable) or Video-1, 2, 3 or 4 for video de vices like VCR’ s, D VD play ers, or camcorders.
Button Functions 46 Light Y our remote control includes illuminated buttons f or key f eatures like C HANNEL +/- and V OLUME +/-. Press the L IGHT b utton to turn the illumination on. D VD Buttons VCR Buttons TV/CA TV Switch VCR/D VD Switch Y ou can also use this remote control to operate the basic functions of your D VD play er.
Button Functions - PIP 47 PIP displays tw o separate pictures on screen. Y our television has 2-T uner PIP , meaning y ou can view pictures from two diff erent channels simultaneously . A special set of PIP control but- tons are located on the upper par t of the remote control.
Button Functions - PIP 48 Freeze Swap Channel +/- for PIP Source Use the F REEZE b utton to loc k a single, still image onto the PIP window . • If PIP is off when F REEZE is pressed, a snapshot of the main screen is taken and placed in the PIP windo w .
49 Sear ch Codes Cable/Satellite Sear ch Codes Function: 1) Slide the first 2-W ay Mode Selector switch to CA TV . 2) Press the TV P O WER and R ETURN +b uttons. Hold for at least three seconds and release . 3) Press TV P O WER , see if the CA TV or Satellite box responds .
Tr oubleshooting 50 There is no power There is no picture or sound Y ou cannot select a certain channel The power turns off by itself The clock is wrong The color quality is poor The On T imer is blin.
51 W arranty JVC COMP ANY OF AMERICA warrants this product and all par ts thereof, e xcept as set forth below ONL Y TO THE ORIGINAL PURCHASER A T RET AIL to be FREE FROM DEFECTIVE MA TERIALS AND WORKM.
52 W arranty 7) Accessories; 8) Batteries (except that Rechargeable Batteries are co vered for 90 da ys from date of purchase.) There are no express warranties except as listed abo ve . THE DURA TION OF ANY IMPLIED W ARRANTIES, INCLUDING THE IMPLIED W ARRANTY OF MERCHANT ABIL TY , IS LIMITED T O THE DURA TION OF THE EXPRESS W ARRANTY HEREIN.
53 A uthorized Ser vice Center s QU ALITY SER VICE T OLL FREE: 1 (800) 537-5722 http://www .jvc.com HO W T O LOCA TE Y OUR JVC SER VICE CENTER Dear Customer , In order to receive the most satisf action from your purchase, please read the instruction booklet before operating the unit.
Specifications 54 Specifications subject to change without notice. Model Reception Format NTSC, BTSC System (Multi-Channel Sound) Reception Range VHF 2 to 13, UHF 14 to 69 Sub Mid, Mid, Super, Hyper a.
Note 55 AV-27,32,36F703/713/803 English 6/14/02 5:07 PM Page 55.
JVC COMP ANY OF AMERICA Division of JVC Americas Corp. 1700 V alley Road Wa yne, New Jerse y , 07470 JVC CANADA, INC. 21 Finchdene Square Scarborough, Ontario Canada, M1X 1A7 AV-27,32,36F703/713/803 E.
Ein wichtiger Punkt beim Kauf des Geräts JVC AV-27F803 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC AV-27F803 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC AV-27F803 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC AV-27F803 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC AV-27F803 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC AV-27F803 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC AV-27F803 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC AV-27F803. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC AV-27F803 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
