Benutzeranleitung / Produktwartung AV 61S902 des Produzenten JVC
Zur Seite of 68
For model: A V -61S902 PROJECTION TELEVISION USER'S GUIDE IMPORT ANT NO TE T O THE CUST OMER In the space below , enter the serial number for your television (located at the rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this guide.
IMPOR T ANT SAFEGU ARDS CA UTION: Please read and retain for y our safety . Electrical energy can per form many useful functions. This TV set has been engineered and manufactured to assure your personal safety . But improper use can result in potential electri- cal shock or fire hazards.
6 If an outside antenna is connected to the TV set, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
Welcome... Thank you for purchasing JVC’ s model A V -61S902 “D’Ahlia” HDTV -r eady projection television which uses the high-quality D-ILA projection system. The D’Ahlia is one of the highest quality and most technologically advanced televisions available today .
3. The lamp is a consumable item Replace the lamp when it has blown or when the pictures becomes dark. The lamp is a user -replaceable item. The lamp must be recycled. For a detailed explanation of how to recycle the lamp, refer to Appendix B and the instruction that are included with the replacement lamp kit.
6 T able of Contents Intr oduction ........8 W atching television .............................................9 Connections Connections Checklist ......................................10 Audio/Video Connectors ..................................10 Front Panel Diagram .
7 T able of Contents Button Functions Split ..................................................................50 Swap ................................................................50 Freeze ...........................................................
8 After removing the product from the box, use the following procedur e to prepar e the television. 1 Check the accessories Check that nothing is missing. 2 Prepare the remote control 1) Refer to page 21 and inser t the batteries. 2) In order to control the television with the remote control, set the TV/CA TV switch to TV .
W atching television PO WER ON (ST ARTING UP) In order to control the television with the remote control, set the TV/CA TV switch to TV .Pr ess the P OWER button. The P OWER lamp on the front of the main unit lights red. After a while, the picture appears on the screen.
10 Connections RF Cable A/V Plug A V Compu Link Plug S-V ideo Plug.
11 Connections ■ Fr ont Panel Diagram S-VIDEO OVER VIDEO L / MONO AUDIO R INPUT4 INPUT A SPLIT OUT INPUT B 75 Ω ( VHF / UHF ) INPUT 1 INPUT 2 INPUT 3 AUDIO L R MONO MONO MONO VIDEO S-VIDEO LINE OU.
12 Connections.
13 Connections INPUT 1 INPUT 2 INPUT 3 AUDIO L R MONO MONO MONO VIDEO S-VIDEO OVER OVER OVER IN IN INPUT A SPLIT OUT INPUT B 75 Ω ( VHF / UHF ) 1) Connect a coaxial cable out from the cable TV wall outlet or exter nal antenna into the RF Input A. 2) Connect a coaxial cable out from the Cable Split Out RF jack into the RF input on the VCR.
14 Connections INPUT 1 INPUT 2 INPUT 3 AUDIO L R MONO MONO MONO VIDEO S-VIDEO OVER OVER OVER IN IN INPUT A SPLIT OUT INPUT B 75 Ω ( VHF / UHF ).
15 Connections DTV Decoder Connection Y our A V -61S902 television is HDTV and SDTV -Ready . This means it can display High Definition television images when connected to a digital television receiver*.
16 Connections DTV Decoder Connection <When connecting a DTV decoder which has a copy-protect Digital-Out ter minal> By inputting a High-band with Digital Content Protection high-definition picture source to the Digital-In terminal of this television, high-definition pictures can be displayed on the screen in their digital for m.
17 DVD Player Connection Y ou can use the Component Video input jacks to connect a DVD player to your television. T o connect a DVD play- er , please follow the steps listed below .
18 Connections A V Compu-Link JVC’ s A V Compu Link feature makes playing video tapes totally automatic. Simply inser t a pre-recor ded tape* into your JVC-brand VCR and the VCR will automatically turn on and begin playback.
19 Connections A set of inputs (Input-4) are provided for your convenience on the front panel of the A V -61S902. The inputs are located behind the door at the center of the front panel below the indicator lights.
20 The A V -61S902 is designed to be the center of a home theater system. The A V -61S902 features a 50 Watt built-in amplifier with output jacks for up to four speakers (2 front, 2 rear -surround). The diagram below shows the con- nections and general speaker placement for a typical Surround-Sound home theater connection.
POWER FREEZE NATURAL CINEMA SWAP ASPECT RM-C308 123 INPUT DISPLAY BBE VIDEO STATUS MUTING MENU VCR CHANNEL PREV NEXT REC STOP PAUSE EXIT V CHIP 789 456 + CH VOL VOL + CH PLAY FF REW SLEEP TIMER 100+ 0.
22 Remote Pr ogramming Setting the CA TV , VCR and D VD Codes Y ou can program your remote to operate your cable box, satellite receiver , VCR or DVD player by using the instructions and codes listed below .
23 Remote Pr ogramming VCR setup The remote control is programmed with VCR codes for power on, power off, play , stop, fast-forward, rewind, pause, recor d, channel up, and channel down operation. 1) Find the VCR brand from the list of codes shown below .
24 Remote Pr ogramming D VD setup The remote control is programmed with DVD codes for power on, power off, play , stop, fast-forward, rewind, previous chapter , next chapter , tray open/close, and still/pause operation. 1) Find the DVD player brand from the list of codes shown below .
25 Remote Pr ogramming Search Codes Cable/Satellite Sear ch Codes Function: 1) Slide the 2-Way Mode Selector switch to CA TV . 2) Press the TV P OWER and R ETURN + buttons. Hold for at least three seconds and release. 3) Press TV P OWER , see if the CA TV or Satellite box responds.
26 The Onscreen Menu System The A V -61S902 comes with JVC’ s Onscreen Menu System. The Onscreen Menus let you make adjustments to your television’ s operation simply and quickly . Examples of the Onscreen Menus are shown below and on the next page.
27 Onscreen Menus SOUND MODE INITIAL SETUP INITIAL SETUP CLOSED CAPTION VERTICAL POSITION DSD OFF LANGUAGE NEXT PAGE PREVIOUS OPERATE BY EXIT BY SELECT BY EXIT FRE SP A ON ENG INITIAL SETUP INITIAL SE.
28 Plug In Menu Plug In Menu The first time you tur n on your television, you will see the PLUG IN MENU. This menu is designed to help you get your television ready to watch right away .
29 Plug In Menu AUTO TUNER SETUP INPUT - A INPUT - B : : AIR CABLE ST ART AUTO TUNER SETUP The AUTO TUNER SETUP feature automatically scans through all the channels your television can receive and memorizes only the channels with clear , active signals.
30 Plug In Menu The A V -61S902 is equipped with its own inter nal clock. The clock is used to run the televisions timer features. The clock MUST be set before you can use any of the timer features. Y our television features the XDS AUTO CLOCK set feature which makes setting the correct time simple.
31 Initial Setup INITIAL SETUP Menu INITIAL SETUP ANTENNA INPUT -B CHANNEL SUMMAR Y V -CHIP SET LOCK CODE AUTO TUNER SETUP NEXT PAGE PREVIOUS OPERATE BY EXIT BY SELECT BY EXIT INPUT -A The AUTO TUNER SETUP function is described on page 29.
32 Initial Setup CHANNEL SUMMAR Y lets you customize the list of channels set after you run AUTO TUNER SETUP. Y ou may delete unwanted channels or add channels that are new , or were not picked up by AUTO TUNER SETUP because of weak signals.
33 V -Chip V -Chip Y our TV is equipped with V -Chip technology which enables TV Parental Guideline and Movie (MP AA) Guideline controls. V -Chip technology allows you to program your TV to receive, or not to receive, programs based on content according to the guidelines.
34 T o Set Movie (MP AA) Ratings Levels Use the 5∞ arrows to move to SET MOVIE RA TINGS. Select this option by pressing 2 or 3 . The screen on the left will appear . Use the 5∞ arrows to move to a movie rating, such as X. Press 2 or 3 to turn the ratings block on or off.
35 T o watch a blocked program, enter the four -digit access code to unlock that channel. Once the correct code is entered, the channel will be unlocked and the program shown. If an incorrect code is entered the message INV ALID LOCK CODE! will flash onscreen.
36 Initial Setup Initial Setup 2 This menu lets you set up some of the functions of the television to meet your personal tastes and needs. Y ou may select one of three languages for onscr een displays.
37 Initial Setup A new CLOSED CAPTION menu will now appear . The Mode option will be highlighted. This lets you set the operating mode for the CLOSED CAPTION feature.
38 Picture Adjust PICTURE ADJUST COLOR PICTURE BRIGHT DET AIL TINT NEXT PAGE PREVIOUS OPERATE EXIT BY SELECT BY EXIT BY PICTURE ADJUST Menu Picture Adjust The PICTURE ADJUST menu lets make precise adjustments to the television’ s picture. Y ou can make adjust- ments to the picture’ s tint, color , contrast, brightness, and level of detail.
39 Picture Adjust BRIGHT The BRIGHT level lets you adjust the degree of light and darkness in the picture. Press 2 to decrease the bright level. Press 3 to increase the bright level. Use the 5∞ arrows to move to the next setting or press E XIT to leave the menu.
40 Picture Adjust PICTURE ADJUST DNR OFF NOISE MUTING SET VIDEO ST A TUS YNR NEXT PAGE PREVIOUS OPERATE BY EXIT BY SELECT EXIT ON ON OFF BY PICTURE ADJUST Menu Picture Adjust 2 The second PICTURE ADJUST menu lets make fur ther adjustments to the television’ s picture and display quali- ties.
41 SET VIDEO ST A TUS Menu The NOISE MUTING setting inser ts a blue screen over any channels that are not broadcasting or have signals to weak to have clear signals. Press the 2 or 3 arrows to tur n NOISE MUTING on or OFF. ON NOISE MUTING OFF SET VIDEO ST A TUS lets you save a customized set of screen display settings.
42 Sound Adjust SOUND ADJUST TREBLE BALANCE MTS SAP MONO BASS NEXT PAGE PREVIOUS OPERATE BY EXIT BY SELECT EXIT BY STEREO SOUND ADJUST Menu Sound Adjust The SOUND ADJUST menu lets you tailor the television’ s sound to suit your personal taste. Y ou can adjust the television’ s bass and treble output, as well as the speaker balance.
43 Sound Adjust MTS STEREO S A P MONO Many broadcasts today contain more than one audio signal. In addition to stereo and mono soundtracks, some broadcasts also contain a second soundtrack in a different language. Use MTS to select the audio signal you wish to listen to.
44 Initial Setup INITIAL SETUP TV SPEAKER SUPER BASS MID LOW OFF NEXT PAGE PREVIOUS OPERATE BY EXIT BY SELECT EXIT HIGH ON BY INITIAL SETUP Menu Access the onscreen menus by pressing M ENU on your remote control.
45 A udio Settings SOUND MODE OPERATE EXIT BY SELECT BY EXIT PRO LOGIC 3D-PHONIC DANCE CLUB CONCERT HALL ST ADIUM HYPER SOUND DOLBY PRO LOGIC BY SOUND MODE Menu Sound Mode The sound system of the A V -61S902 lets you customize the audio output of the television for optimal per formance with your home theater system.
46 A udio Settings Notes: • This function is only available for Dolby Surround encoded programs. • Y ou cannot enjoy Dolby Surround sound with headphones. • An amplifier is necessar y in order to connect additional speakers. Refer to page 20 for infor mation about connecting speakers.
47 A udio Settings Pro Logic 3D-Phonic Y ou can enjoy the atmosphere of Dolby Surround programs without exter nal speakers. Use the 5 and ∞ arrows in the sound mode menu to select PRO LOGIC 3D-PHONIC. Press the 3 arrow to display the Pro Logic 3D-Phonic second menu.
48 CLOCK/TIMERS This CLOCK/TIMERS menu can be used to set the time of the built-in clock and set the ON/OFF TIMER func- tion. CLOCK/TIMERS Access the on-screen menus by pressing the MENU button on your remote control.
49 Aspect Press the A SPECT button on the remote control. The menu shown (left) will appear . T o select the aspect ratio you wish to view , press the A SPECT button to move down the list. Each press will move to the next ratio, the onscreen display will change automatically .
50 Button Functions Split Activate the Split-Screen option by pressing S PLIT on the remote control. MAIN CHANNEL PICTURE SPLIT -SCREEN PICTURE 07 02 SPLIT -SCREEN Mode T wo channels (or input) will now appear onscreen. The channel (or input) you were watching before pressing S PLIT will appear on the left, the new channel will appear on the right.
51 The M ENU button allows you to access JVC’ s onscreen menu system. Press M ENU to activate the onscreen menu system. • See individual topics (like “Picture Adjust”) for specific infor mation on using those menu screens. Press the E XIT button to leave a menu screen.
52 Button Functions BBE high definition audio adds natural, clear , extraordinary sound quality to any program. Use the BBE button to tur n the BBE high definition audio filter ON or OFF . Press the S OUND button to access the Dolby Sound settings menu.
53 Use the number buttons on the remote control to move directly to a specific channel. For example, to move to channel 7: 0 (Zero) 7 (Seven) Use the 100+ button to directly access channels above Channel 99.
54 The remote control includes illuminated buttons for key features like C H +/- and V OL +/-. Press the L IGHT button to turn the illumination on. The illumination will shut off automatically after a few seconds. Light The A V -61S902 can receive signals from a variety of sources.
55 Button Functions VCR Buttons Y ou can use this remote control to operate the basic functions of your VCR. These functions include: play , recor d, rewind, fast-forward, stop, pause, channel scan, TV /VCR, power on, and power off. Move the selector switch to VCR to operate.
There is no power There is no picture or sound Remote control is not operating properly or at all Y ou cannot select a cer- tain channel The power tur ns off by itself It does not operate correctly Th.
Screen is 80% black Stereo or bilingual pro- grams cannot be heard There is no sound from the TV’ s speakers Static electricity Y ou hear occasional crackling sounds The Closed Caption T ext mode is on. T ur n it off in the CLOSED CAPTION Menu, see page 36.
58 Appendix A The lamp and internal circuits of the A V -61S902 are cooled by a fan which draws in cool air through a pair of intakes. The air intakes are located behind the speaker covers on the front of the television and contain air fil- ters which need periodic cleaning.
59 5) Cleaning the filter . The air filters are now exposed. Y ou may use a vacuum cleaner hose to remove dir t and dust from the sur face of the filter . Do not remove the filters from the television. Using a vacuum hose, gently work the nozzle close to the surface of the filter .
60 Appendix B The A V -61S902 uses a 200 Watt high-pressure mercury lamp to project images onto the television screen. When the lamp nears the end of its operating life, you may notice the picture becoming dark. When the picture begins to darken, the lamp bur ns out, it is time to replace the lamp.
61 2) Unplug the television. Disconnect the television’ s power cord from the AC outlet. Make sure the 10 LED lights have stopped blinking before you unplug the television. Never attempt to replace the lamp with the television plugged in. 3) Remove the left speaker panel.
62 Appendix B Replacing the Lamp - continued Please read these instructions fully before attempting to replace the lamp. Please observe all safety warnings. 6) Removing the lamp unit. Using the hex wrench included with the replacement lamp, loosen the two hex screws fastening the lamp unit.
63 Save the box and packaging from your replacement lamp. Y ou can use this packaging to return your used projection lamp for recycling. Please do not thro w the used lamp out with normal trash. A pre-paid label is provided for this purpose. T o package your used lamp for shipment, follow the simple steps below .
64 Appendix C The front panel of the A V -61S902 features ten LED lights located under the television screen. These lights are used to display information about the operation of your television. Starting Up The projection lamp of the A V -61S902 requir es time to warm up to its proper operating temperature.
Limited W arranty JVC COMP ANY OF AMERICA warrants this product and all par ts thereof, e xcept as set forth below ONL Y TO THE ORIGINAL PURCHASER A T RET AIL to be FREE FROM DEFECTIVE MA TERIALS AND WORKMANSHIP from the date of original retail purchase for the period shown belo w .
QU ALITY SER VICE HO W T O LOCA TE Y OUR JVC SER VICE CENTER T OLL FREE: 1 (800) 252-5722 http://www .jvc.com Dear Customer , In order to receive the most satisfaction from your purchase, please read the instruction booklet before operating the unit.
Specifications Specifications subject to change without notice. D VI 25 pin • The Digital-In ter minal is not compatible with the picture signal of a personal computer .
JVC COMP ANY OF AMERICA Division of JVC Americas Corp. 1700 V alley Road W ayne, New Jersey , 07470 JVC CANAD A, INC. 21 Finchdene Square Scarborough, Ontario Canada, M1X 1A7 LCT0942-001A 0101-TN-CR-I.
Ein wichtiger Punkt beim Kauf des Geräts JVC AV 61S902 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JVC AV 61S902 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JVC AV 61S902 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JVC AV 61S902 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JVC AV 61S902 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JVC AV 61S902 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JVC AV 61S902 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JVC AV 61S902. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JVC AV 61S902 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
