Benutzeranleitung / Produktwartung GIGA X7c Professional des Produzenten Jura Capresso
Zur Seite of 60
GIG A X7c Professional Instructions for Use JURA T ype 689 K Original instructions for use Before using the machine read the instructions for use . E Instructions for use has been awarded the seal of .
2 T able of contents Y our GIGA X7c Professional Control elements 4 Import ant information 6 Proper use ...................................................................................................................................................
3 T able of contents W arnings J W ARNING J CAUTION Alwa ys take note of an y information mark ed with the words CAUTION or W ARNING and a warning sign. The signal word W ARNING draws y o ur attention to potential serious injury , and the signal word CAUTION to pot ential minor injury.
4 Control elements Control elements 5 6 2 3 8 7 10 15 14 13 9 11 12 4 1 1 Bean container with aroma preservation cover 2 Bean container status indicator 3 W ater tank cov er 4 W ater tank 5 P ower swi.
5 Control elements T op of the machine 1 Q On/Off button 2 g Rotary Switch 3 O P button (progr amming) Fro n t 4 Display 5 Multi -function buttons (button function depends on what .
6 Important information Impor tant information This machine is intended f or use by spec ialist or tr ained staff in businesses, light industr y and agri- cultur al facilities or f or commercial use b y non -pro - fessionals. It should only be used for c offee prepa- r ation and to heat milk and w ater .
7 Important information U Make sure that the GIGA and the mains cable are not located clo se to hot surfaces. U Be careful to ensure that the mains cable is not tr apped and does not rub against sharp edges. U Never open and repair the mac hine yourself.
8 Important information U Switc h y our GIGA off at the power switch before an y cleaning oper ation. Always wipe the GIGA with a damp cloth rather than a w et one , and protect it from prolonged exposure to w ater splash. U The GIG A is not suitable for installation on a sur face where a jet of w ater can be used.
9 Important information U Children aged 8 and ov er may only operat e the machine without supervision if they hav e been instructed in how to use it safely . Chil- dren must be able to recognise and under - stand the potential dangers arising from incor - rect use.
10 1 Preparing and using for the first time 1 Preparing and using for the first time Visit us on the Internet. On the JURA website (www .jura.com) you will find int eresting and up-to -date information on y our GIGA and on every aspec t of coffee .
11 1 Preparing and using for the first time T R emove an y dir t or foreign objects from inside the bean container . T Fill the bean container with coffee beans and close the aroma preservation cover . E Before the machine is used for the first time , the permanent wat er connection must be installed by a JURA ser vice tec hni- cian.
12 1 Preparing and using for the first time E T o display more languages, press the ‘Next’ button (bottom right). T Press the button that corresponds to the language you w ant, e.g . ‘English’ . ‘Saved ’ appears briefly on the display to confirm the setting.
13 1 Preparing and using for the first time T Press the ‘Expert mode’ button. ‘Time’ T Press the ‘+’ or ‘–’ button to set the hours. T Press the ‘Sav e’ button. T Press the ‘+’ or ‘–’ button to set the minutes.
14 1 Preparing and using for the first time T Place a receptacle under the dual spout. k T Press the Ro tar y Switc h. ‘Machine is rinsing. ’ , the machine rinses. The operation stops automatically . ‘Please select produc t:’ appears on the display .
15 1 Preparing and using for the first time code corresponds to diff erent authorisations. For instance , you can define that initiation of the maintenanc e programmes is disabled using a code . U Blocking the ‘Permanently setting the amount of wat er for the cup size ’ func tion.
16 2 Preparation 2 Prepar ation E While a product is being prepared, you can stop prepar ation at any time . T o do this, press the Rotar y Switch k or the ‘ ’ button. E During preparation, y ou can change the preset amounts (e.g. amount of milk f oam or wa ter) by turning the R ot ary Switc h g .
17 2 Preparation On the display (star t screen), you will see v arious produc ts, which you can prep are by simply pr essing the corresponding button. A speciality coffee display ed on the star t screen is alwa ys prepared in the same wa y . Example : Proceed as follo ws to prepare one coffee .
18 2 Preparation As soon as you turn the Rotary Switch, more products are displayed in a product selec tor . E The product selec tor view disappears automatically after 5seconds if no prepar ation is star ted. Example : Proceed as follows to prepare a milky coffee using the product selec tor .
19 2 Preparation Example : Proceed as follows to prepar e one coffee using ground coffee . Precondition: ‘Please select product:’ is displayed. T Place a cup under the dual spout. T Open the cover of the filler funnel f or ground coffee .
20 2 Preparation All barista recipes are prep ared following this model. E The product selec tor view disappears automatically after 5seconds if no prepar ation is star ted. Example : Proceed as follo ws to prepare a White Cool. Precondition: ‘Please select product:’ is displayed.
21 2 Preparation T Place a cup under the dual spout. T Press and hold the ‘Coffee’ button. ‘Coffee’ and the fill volume are displa yed. T Hold the ‘Coffe e’ button down until ‘Enough co ffee? Press button. ’ appear s. T Release the ‘Cof fee’ button.
22 2 Preparation T Press the ‘Café à la carte’ button. T Press the ‘A c t i v e ’ button. T Press the ‘Sav e’ button. ‘Saved ’ appears briefly on the display . ‘Machine settings (4/5)’ O T Press the P button to exit progr amming mode.
23 2 Preparation The following temper atures can be selec ted for preparing hot w ater: ‘Low’ , ‘Normal’ , ‘High ’ . There is a danger of scalding from hot wat er splashes. T Av oid direct contac t with the skin. Precondition: ‘Please select product:’ is displayed.
24 3 Daily operation 3 Daily oper ation When the GIGA is switched on, it automatically prompts you to perform the rinse operation. Start the rinse operation by pressing the Rotary Switch k .
25 3 Daily operation When you switc h off your GIGA, the dual spout is rinsed automati- cally . Precondition: ‘Please select product:’ is displayed. T Place a receptacle under the dual spout. Q T Press the On/Off button. ‘Machine is rinsing.
26 4 Permanent settings in programming mode 4 Permanent settings in progr amming mode Press the P button to enter progr amming mode. Y ou can navigate through the programme it ems and permanently save the required settings simply by turning the R otar y S witch and using the multi- function buttons.
27 4 Permanent settings in programming mode Programme it em Sub-item Explanation ‘Information (5/5)’ ‘Product counter’ , ‘Day c ounter’ , ‘Maintenance counte r’ , ‘V ersion’ T K eep track of all products prepared and view the number of maintenance progr ammes performed.
28 4 Permanent settings in programming mode Product Coffee strength Amount More settings Caffè latte* ; (extra-mild), ;; (mild), ;;; (normal), ;;;; (strong), ;;;;; (extra-strong) W ater: 25ml–290ml Milk: 0sec.–120sec. Milk foam: 0sec.
29 4 Permanent settings in programming mode E Next selec t the button of the product for which y ou would lik e to mak e settings. No pr oduct is prepared at this point. E Y ou can also select the produc ts in the produc t selector . T o do this, turn the Rotary Switch to vie w the product selec tor .
30 4 Permanent settings in programming mode T Press the ‘+’ or ‘–’ button to change the setting for the con- sistency of grind. T Press the ‘Sav e’ button. ‘Saved ’ appears briefly on the display . ‘Set consistency of grind’ O T Press the P button to exit progr amming mode.
31 4 Permanent settings in programming mode O T Press the P button. ‘Maintenance status (1/5)’ g T T urn the Rotary Switch until the progr amme item ‘Machine settings (3/5)’ is display ed. T Press the ‘Maintenance settings ’ button.
32 4 Permanent settings in programming mode In the programme it em ‘Machine settings (3/5)’ / ‘Sa ve energy’ yo u can permanently set an energy-saving mode (Energy Sav e Mode , E.S.M. © ): U ‘Save No ’ U All speciality coffees, speciality coffees with milk and hot wat er can be prepared without having to w ait.
33 4 Permanent settings in programming mode Y ou already set the time and date during first -time use. Y ou can change this setting. E For the time f ormat, you can choo se between ‘24 hrs’ and ‘ AM / PM’ (see Chapter 4 ‘Permanent settings in progr amming mode – Units’).
34 4 Permanent settings in programming mode O T Press the P button. ‘Maintenance status (1/5)’ g T T urn the Rotary Switch until the progr amme item ‘Machine settings (3/5)’ is display ed. T Press the ‘Timer’ button.
35 4 Permanent settings in programming mode g T T urn the Rotary Switch until the progr amme item ‘Machine settings (3/5)’ is display ed. T Press the ‘Timer’ button. T Press the ‘Next’ button. T Press the ‘Swit ch off after’ button.
36 4 Permanent settings in programming mode In the programme it em ‘Machine settings (3/5)’ / ‘F ac tory setting’ you can reset v arious settings to their factory settings: U ‘ All produc ts’ U The settings (amount of water , coffee strength, temper ature etc.
37 4 Permanent settings in programming mode g T T urn the Rotary Switch until the progr amme item ‘Machine settings (4/5)’ is display ed. T Press the ‘Choose language ’ button. ‘Choose language ’ E T o display more languages, press the ‘Next’ button (bottom right).
38 4 Permanent settings in programming mode In this programme it em you can set the back ground for the display of your GIGA. E The set background is only displa yed on the start screen. Precondition: ‘Please select product:’ is displayed. O T Press the P button.
39 4 Permanent settings in programming mode In the programme it em ‘Information (5/5)’ y ou can view the follo w- ing information: U ‘Product counter’ : Number of prepared coffee speciality co.
40 5 Maintenance 5 Maintenance Y our GIGA has the following integrat ed maintenance progr ammes: U Rinsing the coffee system ( ‘Rinse the coff ee system’ ) U Rinsing the milk system in the dual sp.
41 5 Maintenance Depending on the setting in programming mode , the G IGA prompts you to rinse the milk syst em or automatically performs rinsing fol- lowing milk prepar ation. Example : Proceed as follo ws to rinse the milk system when prompted to do so.
42 5 Maintenance T Place another receptacle under the dual spout. T Press the ‘Next’ button. ‘Milk system is being cleaned. ’ , water flo ws out of the dual spout. ‘Wat er for cleaning milk system. ’ T Rinse the receptacle thoroughly , fill it with 250 ml of fresh wat er and immerse the milk pipe in the water .
43 5 Maintenance T Carefully pull the bottom par t of the milk system down and off. T Remov e the milk system from the dual spout. T Remov e the air intake pipe . T Dismantle the milk system into its individual par ts. T Rinse all the par ts under running water .
44 5 Maintenance T Fit the air intake pipe. T Fit the assembled individual par ts back in the dual spout and press it firmly . T Attach the bottom part of the milk system to the par t already inserted from below. T Fit the c over of the dual spout.
45 5 Maintenance E After the set amount of water has flo wed through the external filter cartridge, it will cease to w ork. Y our GIGA will automati- cally prompt you to c hange the filter . Example : Proc eed as follow s to change the filter when prompt ed to do so.
46 5 Maintenance T Empty the drip tray and c offee grounds container and put them back into the machine . ‘Press the Rotary Switch. ’ T Place a receptacle under the dual spout. k T Press the Ro tar y Switc h. ‘Machine is being cleaned.
47 5 Maintenance If the descaling operation is int errupted, there may be damage to the machine . T Allow the descaling progr amme to run to the end. If the descaling agent comes into contact with sensitive surfaces (e.g. marble), damage cannot be ruled out.
48 5 Maintenance T Place one receptacle under the dual spout and another under the hot -water spout. k T Press the Ro tar y Switc h. ‘Machine is being descaled. ’ , water flows repeat edly out of the dual spout and the hot -water spout.
49 5 Maintenance Coffee beans may be c ov ered with a slight oil film which remains on the walls of the bean c ontainers. These traces may negativ ely affect the coffee result. F or this reason clean the bean containers from time to time . Precondition: ‘Fill bean container .
50 6 Display messages 6 Display messages Message Cause/Result Action ‘Empty coffee grounds container .’ The coffee grounds container is full. Y ou cannot prepare any product s. T Empty the coffee grounds container and the drip tra y (see Chapter 3 ‘Daily oper ation – Daily maintenance ’).
51 6 Display messages Message Cause/Result Action ‘Not enough ground coffee .’ There is insufficient ground coff ee in the machine ; the GIGA stops the operation. T The next time you prepare a bever age, add more ground coffee (see Chapter 2 ‘Prepar ation – Ground coffee ’).
52 7 T roubleshooting 7 T roubleshooting Problem Cause/Result Action Insufficient foam is produced when the milk is frothed, or milk spra ys from the dual spout. The dual spout is dirt y . T Rinse and c lean the dual spout (see Chapter 5 ‘Maintenanc e – Cleaning the milk system’).
53 8 T ransport and environmentally friendly disposal 8 T ransport and environmentally friendly disposal In order to protect the GIGA from frost during transport, the system must be emptied. Precondition: ‘Please select product:’ is displayed. T Place one receptacle under the dual spout and another under the hot -water spout.
54 9 T echnical data 9 T echnical data V olt age 220–240V~, 50Hz Pow er 2300W Airborne noise emitted L P <70dB (A) Ambient conditions Humidity max. 80% Ambient temper ature 10– 35°C Conformity mark A S Energy consumption ‘Save energy’ / ‘Sa ve No ’ approx.
55 10 Index 10 Index A Addresses 60 Aroma preservation cover Bean container with aroma preser vation cov er 4 Automatic switch-off 33, 34 Automatic switch-on 33 B Background 38 Barista recipes 19 Prep.
56 10 Index H Hotline 60 Hot wat er 23 Hot -water spout Height -adjust able hot -water spout 4 I Instant coffee Ground coffee 18 Internet 10 J JURA Contac t details 60 Internet 10 L Language 36 Latte .
57 10 Index R Reci pe s Barista recipes 19 Rinsing the coffee system 40 Ristretto 16 Rotary Selec tion 16 Product selec tor 18 Rotary Switch 5 S Safety 6 Safety information 6 Service cover 5 Service s.
58.
59.
60 11 JURA contact details/ Legal information 11 JURA contact det ails/ Legal information JURA Elektroapparat e AG Kaffee weltstrasse 10 CH-4626 Niederbuchsiten T el.
Ein wichtiger Punkt beim Kauf des Geräts Jura Capresso GIGA X7c Professional (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Jura Capresso GIGA X7c Professional noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Jura Capresso GIGA X7c Professional - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Jura Capresso GIGA X7c Professional reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Jura Capresso GIGA X7c Professional erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Jura Capresso GIGA X7c Professional besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Jura Capresso GIGA X7c Professional verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Jura Capresso GIGA X7c Professional. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Jura Capresso GIGA X7c Professional gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
