Benutzeranleitung / Produktwartung Phase 7 D30 des Produzenten JLA
Zur Seite of 39
D-30 Parts Manual 031102JCARRITA/rmoles ADC Part No. 450589 JLA Limited Meadowcroft Lane, Halifax Road Ripponden West Yorkshire, England HX6 4AJ Telephone: 01422 822282 / Fax: 01422 824390.
Retain This Manual In A Safe Place For Future Reference J.L.A. products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble free operation. ONLY qualified technicians should service this equipment.
Table of Contents OPL Control Door Assembly For Models Mfd. as of July 1, 2002 .................................................................................................. 2 OPL Control Door Assembly For Models Mfd. prior to July 1, 2002 .......
2 OPL Contr ol Door Assembly For Models Mfd. as of July 1, 2002 Illus. No. Part No. Qty . Description 1 883574 1 White OPL Control Door (includes illus.
3 Illus. No. Part No. Qty . Description 1 883294 1 White Control Door Assembly (includes illus. nos. 1 and 3) 2 150314 4 #10-32 x 1/2” TORX + BTN 3 1 17604 2 Noise Suppressor T ape (sold by the foot) 4 --------* 1 Logo 5 15401 1 4 #10-32 Multi-Thread U-Nut * Contact reseller for logo.
4 Phase 7 OPL Micr opr ocessor Contr ol Panel Assembly Illus. No. Part No. Qty . Description 1 1 12571 1 Phase 7 OPL Keyboard 2 850984 1 Phase 7 Microprocessor Controller (computer) Panel ONL Y 883301 1 Phase 7 OPL Reversing Microprocessor Controller (computer) Control Panel Assembly Complete (includes illus.
5 Illus. No. Part No. Qty . Description 1 122681 1 10-Pin Connector 2 122676 1 8-Pin Connector 3 122646 1 2-Pin Connector 4 122683 1 6-Pin T erminal 5 122640 1 9-Pin T erminal 6 122706 * #20-16 U.M.N.L. Socket 7 122669 * Female Crimp T erminal * As needed.
6 Fr ont Panel Assembly For Models Mfd. as of July 1, 2002 Illus. No. Part No. Qty . Description 1 883567 1 White Front Panel Assembly (includes illus.
7 Fr ont Panel Assembly For Models Mfd. prior to July 1, 2002 Illus. No. Part No. Qty . Description 1 883137 1 White Front Panel Assembly (includes illus.
8 Main Door “S teel” Assembly Illus. No. Part No. Qty . Description 1 8 8 1 1 5 0 1 Black Main Door Assembly Complete (includes illus. nos. 1, 2, and 8 through 15) 2 102354 1 Door Gasket 170731 1 Black Gasket Adhesive (10.3 oz. cartridge) 3 8 8 1 1 5 2 1 Black T op Hinge Block Assembly (includes illus.
9 Main Door Switch Assembly Illus. No. Part No. Qty . Description 1 150006 2 #6-32 x 7/8” Phillips Pan Head Machine Screw 2 152013 2 #6-32 Hex Nut 3 153010 2 #6 S tar W asher 4 137005 1 Door Switch 5 122636 2 Flag T erminal 6 88121 1 1 Black Main Door Switch Housing ONL Y 8 8 1 1 5 3 1 Black Main Door Switch Housing Complete (includes illus.
10 Basket (T umbler)/Support Assemblies Illus. No. Part No. Qty . Description 1* 800776 1 S tainless Steel Basket (tumbler) ONL Y (without felt collar) 883295 1 S tainless Steel Basket (tumbler)/Support Assemblies Complete (includes illus.
11 Dr op Lint Door Assembly For Models Mfd. as of July 1, 2002 Illus. No. Part No. Qty . Description 1 802277 1 Drop Lint Door (for OPL models) (includes illus.
12 Lint T rap Assembly For Models Mfd. as of July 1, 2002 Illus. No. Part No. Qty . Description 1 800401 1 Lint T rap Assembly Complete (includes illus.
13 Lint Drawer/Lint Drawer Switch Assembly For Models Mfd. prior to July 1, 2002 Illus. No. Part No. Qty . Description 1 883140 1 White Lint Drawer Assembly (includes illus.
14 Illus. No. Part No. Qty . Description 1 100107 1 5L-670 V -Belt (basket [tumbler] to idler) 2 1 0 1 1 2 9 1 9” x 2-1/2” Compound Pulley 3 100103 1 4L-510 V -Belt 4 154301 2 5/16-18 x 1” Allen Setscrew 5 100705 1 3/16” x 3/16” x 1-3/8” Key 6 882576 1 Idler Bearing Assembly Complete (includes illus.
15 Basket (T umbler) Bearing Assembly Illus. No. Part No. Qty . Description 1 153002 3 5/16” Lock W asher 2 880213 1 1-1/4” Flange Bearing with Nylock Setscrew 3 153002 3 5/16” Lock W asher 4 15.
16 Motor Mount Assembly.
17 Illus. No. Part No. Qty . Description 1 100103 1 4L-510 V -Belt (motor to idler) 2 100705 1 3/16” x 3/16” x 1-3/8” Key 3 1 0 1 1 3 1 1 1/2” x 2-1/4” Motor Pulley (for models mfd. as of August 22, 2002) 1 0 1 13 3 1 5/8” x 2-1/4” Motor Pulley (for models mfd.
18 Sensor Bracket Assemblies For Models Mfd. as of July 1, 2002.
19 Sensor Bracket Assemblies For Models Mfd. as of July 1, 2002 Illus. No. Part No. Qty . Description 1 880251 1 1/4” T emperature Sensor Probe Assembly (includes illus.
20 Sensor Bracket Assemblies For Models Mfd. prior to July 1, 2002.
21 Sensor Bracket Assemblies For Models Mfd. prior to July 1, 2002 Illus. No. Part No. Qty . Description 1 882533 1 1/4” T emperature Sensor Probe Assembly (includes illus.
22 Dir ect Spark Ignition (DSI) Burner Assembly.
23 Dir ect Spark Ignition (DSI) Burner Assembly Illus. No. Part No. Qty . Description 1 817088 1 Direct Spark Ignition (DSI) Burner Box ONL Y 816998** 1 N a tural Gas Burner Assembly (includes illus. nos. 1 through 8 and 10 through 31) 817208** 1 Liquid Propane (L.
24 Hot Surface Ignition (HSI) Gas Burner Assembly.
25 Illus. No. Part No. Qty . Description 1 150301 1 #8-18 x 7/16” Phillips Pan Head TEK Screw 2 128920 1 Hot Surface Ignitor (HSI) 24V 2-1/2” Long 3 128921 1 Hot Surface Ignition (HSI) Flame Senso.
26 Electric Oven Assembly.
27 Electric Oven Assembly Illus. No. Part No. Qty . Description 1 803003* 1 Small Electric Oven Box ONL Y ---------* 1 Electric Oven Assembly Complete 2 ---------* - Electric Element 3 150300 2 #10-16 x 1/2” Hex W asher TEK Screw 4 802800 1 Sail Switch Box with Bracket and Cover ONL Y 802801 1 Sail Switch Box Assembly Complete (includes illus.
28 Rear Electric Relay Panel Assembly.
29 Illus. No. Part No. Qty . Description 1 151000 2 #6-32 Pal Nut 2 150300 2 #10-16 x 1/2” Hex W asher TEK Screw 3 150008 2 #6-32 x 1-1/4” Phillips Pan Head Machine Screw 4 120716 1 2-Position T e.
30 Illus. No. Part No. Qty . Description 1 822752 1 S.A.F .E. T emperature Probe Assembly (includes illus. nos. 1 through 5) 2 154007 2 Push On Fastener 3 390390 1 Sensor Bracket (Only) 4 150301 2 #8-18 Phillips Pan Head TEK Screw 5 122647 1 Connector ONL Y S.
31 S.A.F .E. Solenoid and Piping Assembly Illus. No. Part No. Qty . Description 1 1651 14 1 S.A.F .E. Solenoid V alve 24V 50/60 Hz 2 143220 1 3/8” F .P .T . Brass T ee 3 143251 1 3/8” M.P .T . Brass Plug 4 143208 2 3/8” Comp x 3/8” M.P .T . Brass Connector 5 143099* 6' 3/8” OD x 0.
32 S team Coil/Air -Operated S team Damper Assembly.
33 Illus. No. Part No. Qty . Description 1 165013 1 S team Coil Assembly 2 153002 6 5/16” Lock W asher 3 152004 6 5/16-18 Hex Nut 4 152002 4 1/4-20 Hex Nut 5 153007 4 1/4” Lock W asher 6 820321 2 S team Damper Hinge Assembly 7 880835 1 S team Damper Assembly (includes illus.
34 Illus. No. Part No. Qty . Description 1 322809 1 Back Electrical Box Cover 2 150301 4 #8-18 x 7/16” Phillips Pan Head TEK Screw 3* 314424 1 Gas T op Back Guard 322075 1 Electric T op Back Guard 4.
35 Electrical Oven Component Application Chart * When ordering Oven Assembly Complete, specify 3 wire or 4 wire when applicable, as well as if dryer has microprocessor controls .
36 Additional Parts A vailable Part No. Description 1 14006 “ W ARNING - Fire Hazards” Label 1 12280 “Clean Lint Screen” Label 1 14001 “CAUTION - Exhaust/Lint Screen” Label 1 14521 “Phas.
ADC 450589 1 - 03/29/02-15 2 * 10/16/02-15.
Ein wichtiger Punkt beim Kauf des Geräts JLA Phase 7 D30 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie JLA Phase 7 D30 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für JLA Phase 7 D30 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von JLA Phase 7 D30 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über JLA Phase 7 D30 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon JLA Phase 7 D30 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von JLA Phase 7 D30 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit JLA Phase 7 D30. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei JLA Phase 7 D30 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
