Benutzeranleitung / Produktwartung liberty (2008) des Produzenten Jeep
Zur Seite of 493
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION .............................................................3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ............................... 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ...........
I n f o r m a t i o n P r o v i d e d b y :.
INTRODUCTION CONTENTS m Introduction ........................... 4 m Rollover W arning ........................ 4 m How T o Use This Manual .................. 5 m W arnings And Cautions ................... 7 m V ehicle Identification Number ..........
INTRODUCTION This manual has been prepar ed with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a W arranty Information Booklet and various customer oriented documents.
Failure to use driver and passenger seat belts pr ovided is a major cause of severe or fatal injury . In fact, the U.S. government notes that the universal use of existing seat belts could cut the highway death toll by 10,000 or more each year , and could reduce disabling injuries by 2 million annually .
6 INTRODUCTION I n f o r m a t i o n P r o v i d e d b y :.
W ARNINGS AND CAUTIONS This manual contains W ARNINGS against operating procedur es, which could result in an accident or bodily injury . It also contains CAUTIONS against pr ocedures, which could result in damage to your vehicle. If you do not read this entire manual, you may miss important information.
VEHICLE MODIFICA TIONS / AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS m A W ord About Y our Keys .................. 1 2 ▫ Ignition Key Removal ................... 1 2 ▫ Key-In-Ignition Reminder ................ 1 4 m Sentry Key ............................ 1 4 ▫ Replacement Keys .
▫ T o Unlatch The Liftgate Flip-Up W indow ..... 2 4 ▫ Using The Panic Alarm .................. 2 4 ▫ Programming Additional T ransmitters ........ 2 5 ▫ Battery Replacement .................... 2 5 ▫ General Information ....................
▫ Driver And Front Passenger Supplemental Restraint System (SRS) - Airbag ............ 5 2 ▫ Child Restraint ........................ 6 9 m Engine Break-In Recommendations ........... 7 9 m Safety T ips ............................ 7 9 ▫ T ransporting Passengers .
A WORD ABOUT YOUR KEYS Y ou can insert the double-sided keys into the locks with either side up. The dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys from your dealer .
Manual T ransmission — If Equipped T urn the key to the ACC position and then push the key and cylinder inward slightly and rotate the key to the LOCK position.
W ARNING! Never leave children alone in a vehicle. Leaving children in a vehicle unattended is dangerous for a number of reasons. A child or others could be seri- ously or fatally injured. Don’t leave the key in the ignition. A child could operate power windows, other controls, or move the vehicle.
the vehicle. The system will shut the engine off in two (2) seconds if someone uses an invalid key to start the engine. NOTE: A key , which has not been programmed, is also considered an invalid key even if it is cut to fit the ignition switch lock cylinder for that vehicle.
Replacement Keys NOTE: Only keys that are programmed to the vehicle electronics can be used to start and operate the vehicle. Once a Sentry Key is programmed to a vehicle, it cannot be programmed to any other vehicle. CAUTION! Always remove Sentry Keys from the vehicle and lock all doors when leaving the vehicle unattended.
addition, the V ehicle Security Alarm Indicator Light will begin to flash. T urn the ignition switch to the “LOCK” position and remove the second key . 4. Insert a blank Sentry Key into the ignition switch. T urn the ignition switch to the “ON” position within 60 seconds.
STEERING WHEEL LOCK — IF EQUIPPED Y our vehicle may be equipped with a passive steering wheel lock (manual transmission only). This lock pr e- vents steering the vehicle without the ignition key . If the steering wheel is moved a half turn in either direction and the key is not in the ignition, the steering wheel will lock.
Rearming of the System: If something triggers the alarm, and no action is taken to disarm it, the system will turn off the horn after 3 minutes, turn off all of the visual signals after 15 minutes, and then the system will rearm itself. T o Arm the System: 1.
The Security Alarm System is designed to pr otect your vehicle; however , you can create conditions where the system will give you a false alarm. If the previously described arming sequence has occurred, the system will arm regar dless of whether you are inside or outside the vehicle.
NOTE: Inserting the key into the ignition switch dis- ables all buttons on the transmitter . T o Unlock the Doors and Liftgate: Press and r elease the Unlock button on the transmitter once to unlock the driver’s door , or twice to unlock all doors and the liftgate.
3. T est the featur e from outside the vehicle by pr essing the Lock and Unlock buttons on the transmitter . 4. Repeat these steps if you want to return this feature to its previous setting. NOTE: Pressing the Lock button on the transmitter while you are inside the vehicle will activate the Security Alarm.
• For vehicles not equipped with the EVIC, perform the following steps: 1. Press the Lock button on a programmed (i.e. func- tional) transmitter for at least 4 seconds, but no longer than 10 seconds. Then, press the Panic button while still holding the Lock button.
2. Release both buttons at the same time. 3. T est the featur e from outside the vehicle by pr essing the Lock and Unlock buttons on the transmitter . 4. Repeat these steps if you want to return this feature to its previous setting. NOTE: Pressing the Lock button on the transmitter while you are inside the vehicle will activate the Security Alarm.
headlights and turn signal lights will flash, the horn will pulse on and off, and the illuminated entry system will turn on. The panic alarm will stay on for 3 minutes unless you turn it off by pressing the Panic button a second time or if the vehicle speed is 5 mph (8 km/h) or greater .
2. W ith the transmitter buttons facing down, use a flat blade tool to pry the two halves of the transmitter case apart. Make sure not to damage the seal during removal. 3. Remove and replace the batteries. A void touching the new batteries with your fingers.
NOTE: Changes or modifications not expressly ap- proved by the party r esponsible for compliance could void the user’s authority to operate the equipment. If your Keyless Entry T ransmitter fails to operate from a normal distance, check for these two conditions.
How T o Use Remote Start All of the following conditions must be met before the engine will remote start: • Gear selector lever in “P” (Park). • Doors closed. • Hood closed. • Liftgate closed. • Hazard switch off. • Brake switch inactive (brake pedal not pressed).
T o Exit Remote Start Mode & Drive the V ehicle Before the end of the 15-minute cycle, press and release the Unlock button on the RKE transmitter to unlock the doors and disarm the V ehicle Security Alarm (if equipped). Then, insert the key into the ignition switch and turn the switch to the ON position.
If the door lock plunger is down when you shut the door , the door will lock. Therefor e, make sure the keys are not inside the vehicle before closing the door .
Power Door Locks A power door lock switch is on each fr ont door trim panel. Use this switch to lock or unlock the doors and liftgate. If you press the power door lock switch while the key is in the ignition, and any front door is open, the power locks will not operate.
Automatic Door Locks Programming The Automatic Door Locks feature can be enabled or disabled as follows: • For vehicles equipped with the Electronic V ehicle Information Center (EVIC), refer to “P.
5. The doors were not previously unlocked. 6. The vehicle speed is 0 mph (0 km/h). Automatic Unlock Doors on Exit Programming The Automatic Unlock Doors On Exit feature can be enabled or disabled as f.
2. Insert the tip of the ignition key into the child lock control and rotate it to the lock position. 3. Repeat Steps 1 and 2 on the opposite rear door . NOTE: When the child lock system is engaged, the door can be opened only by using the outside door handle even though the inside door lock is in the unlocked position.
• For emergency exit with the system engaged, move the lock plunger up (unlocked position), roll down the window , and open the door with the outside door handle. T o Disengage the Child Protection Door Lock 1. Open the rear door . 2. Insert the tip of the ignition key into the child lock control and rotate it to the unlock position.
WINDOWS Power Windows The window contr ols on the driver’s door trim panel control all the door windows. There are single window contr ols on each passenger door trim panel, which operate the passenger door windows. The window controls will operate when the ignition switch is in the ON or ACC position.
T o open the window part way , pr ess the window switch to the first detent and release it when you want the window to stop. T o stop the window from going all the way down during the auto-down operation, pull up on the switch briefly .
will remain active for 45 seconds after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature. For vehicles equipped with the EVIC, the power window switches will remain active for up to 10 minutes after the ignition switch is turned to the LOCK position.
Reset It may be necessary at some point in time to reactivate the auto-up feature. T o do so, perform the following procedur e: 1. Pull the window switch up to close window com- pletely and continue to hold the switch up for an additional two seconds after the window is closed.
LIFTGA TE T o open the liftgate, pull up (squeeze) on the handle and lift. NOTE: Use the power door lock switch on either front door trim panel or the Remote Keyless Entry (RKE) transmitter to lock and unlock the liftgate. The manual door locks on the doors and the driver’s door lock cylinder will not lock and unlock the liftgate.
OCCUP ANT RESTRAINTS Some of the most important safety featur es in your vehicle are the restraint systems. These include the front and rear seat belts for the driver and all passengers, front airbags for both the driver and front passenger , and side curtain airbags for the driver and passengers seated next to a window .
inside of the vehicle. Everyone in a motor vehicle should be belted at all times to reduce or prevent injuries. Lap/Shoulder Belts All seating positions in your vehicle have combination lap/shoulder belts. The belt webbing retractor is de- signed to lock during very sudden stops or collisions.
Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door . Sit back and adjust the seat. 2. The seat belt latch plate is above the back of your seat. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to make the belt go around your lap.
3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries.
4. Position the lap belt across your thighs, below your abdomen. T o remove slack in the lap belt portion, pull up a bit on the shoulder belt. T o loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision.
6. T o release the belt, push the red button on the buckle. The belt will automatically retract to its stowed position. If necessary , slide the latch plate down the webbing to allow the belt to retract fully . W ARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection.
As a guide, if you ar e shorter than average, you will prefer a lower position, and if you are taller than average, you will prefer a higher position. When you release the anchorage, try to move it up and down to make sure that it is locked in position.
Enhanced Seat Belt Use Reminder System (BeltAlert) If the driver’s or front passenger’s seat belt has not been buckled within 60 seconds of starting the vehicle, and if the vehicle speed is greater than 5 mph (8 km/h), the Enhanced W arning System (BeltAlert) will alert the driver or front passenger to buckle their seat belt.
3. W ithin 60 seconds of turning the ignition switch to the ON position, unbuckle and then re-buckle the driver’s seat belt at least thr ee times within 10 seconds, ending with the seat belt buckled. NOTE: W atch for the Seat Belt Reminder Light to turn on while unbuckling the seat belt and turn off while re-buckling the seat belt.
How to Disengage The Automatic Locking Mode Disconnect the combination lap/shoulder belt from the buckle and allow it to r etract completely to disengage the automatic locking mode and activate the vehicle sensitive (emergency) locking mode.
Keep the belt low so that it does not come across the abdomen. That way the str ong bones of the hips will take the force if there is a collision. Seat Belt Extender If a seat belt is too short, even .
Driver and Front Passenger Supplemental Restraint System (SRS) - Airbag This vehicle has airbags for both the driver and front passenger as a supplement to the seat belt restraint systems. The driver’s airbag is mounted in the steering wheel. The passenger’s front airbag is mounted in the instrument panel, above the glove compartment.
The front airbags have a multistage inflator design. This may allow the airbag to have different rates of inflation that are based on collision severity and occupant size.
W ARNING! • Do not put anything on or around the front and side curtain airbag covers or attempt to manually open them. Y ou may damage the airbags and you could be injured because the airbags are no longer functional. These protective covers for the airbag cushions are designed to open only when the airbags are inflating.
classified in a category other than that of an adult (refer to information on Occupant Classification System in this section). This could be a child, teenager , or even a small size adult. Here are some simple steps you can take to minimize the risk of harm from a deploying airbag.
4. Do not lean against the door or window , airbags will inflate forcefully into the space between you and the door . 5. If the airbag system in this vehicle needs to be modified to accommodate a disabled person, contact the Customer Center . Phone numbers are provided under “If Y ou Need Assistance” in Section 9 of this manual.
Airbag System Components The airbag system consists of the following: • Occupant Restraint Controller (ORC) • Airbag W arning Light • Driver Airbag • Front Passenger Airbag • Side Curtain Ai.
The ORC also monitors the r eadiness of the electr onic parts of the system whenever the ignition switch is in the ST AR T or ON position. These include all of the items listed above except the Passenger Airbag Disable (P AD) Indicator Light, the instrument panel, and the steering wheel and column.
NOTE: Children 12 years and under should always ride buckled up in a r ear seat in an appropriate child restraint. • The Passenger Airbag Disable (P AD) Indicator Light (an amber light located in the center of the instrument panel) tells the driver and front passenger when the front passenger airbag is turned of f.
is turned off and it will not inflate. If the “P AD Indicator Light” is not illuminated, DO NOT assume the airbag is turned off and move the child restraint to the rear seat. A deploying passenger airbag can cause death or serious injury to a child in a rear facing infant seat.
will cause the system to turn the airbag on. In this case, the OCS has classified the occupant of the seat as an adult. An adult occupant needs to sit in a normal position (with their feet on or near the floor) in order to be properly classified. Reclining the seat back too far may change how an occupant is classified by the OCS.
lodged under the seat and interferes with operation of the weight sensors, a fault will occur which turns on both the “P AD Indicator Light” and the “Airbag W arning Light.” Once the lodged object is removed, the fault will be automatically cleared after a short period of time.
• The Side Impact SRS Side Curtain Airbags are de- signed to activate only in certain side collisions and rollover events. When the ORC detects a collision requiring the side curtain airbag to inflate, it signals the inflators on the crash side of the vehicle or both sides of the vehicle for a rollover event.
W ARNING! Unapproved modifications or service procedures to the front passenger seat assembly or its related com- ponents may inadvertently change the airbag deploy- ment in case of a frontal crash. This could result in death or serious injury to the front seat passenger if the vehicle is involved in an accident.
• As the airbags deflate, you may see some smoke-like particles. The particles are a normal by-pr oduct of the process that generates the nontoxic gas used for airbag inflation. These airborne particles may irritate the skin, eyes, nose, or throat. If you have skin or eye irritation, rinse the area with cool water .
• T urns on the interior lights, which remain on as long as the battery has power or until the ignition key is removed. • Unlocks the doors automatically . NOTE: The interior lights can only be deactivated if the key is removed from the ignition switch or the vehicle is driven.
NOTE: Perchlorate Material – special handling may apply , See www .dtsc.ca.gov/hazardouswaste/per chlorate Airbag W arning Light Y ou will want to have the airbag system ready to inflate for your protection in an impact. The airbag system is designed to be maintenance free.
In conjunction with other data gathered during a com- plete accident investigation, the electronic data may be used by DaimlerChrysler Corporation and others to learn more about the possible causes of crashes and associated injuries in order to assess and improve vehicle perfor- mance.
Data Parameters that May Be Recorded: • Diagnostic tr ouble code(s) and warning light status for electronically controlled safety systems, including the airbag system • Airbag disable light status.
W ARNING! In a collision, an unrestrained child, even a tiny baby , can become a missile inside the vehicle. The force required to hold even an infant on your lap can become so great that you could not hold the child, no matter how strong you are. The child and others could be badly injured.
“LA TCH — Child Seat Anchorage System (Lower Anchors and T ether for CHildren)” in this section. • Rearward-facing child seats must NEVER be used in the front seat of a vehicle with the front passenger airbag unless the airbag is turned off. An airbag deployment could cause sever e injury or death to infants in this position.
• Check belt fit periodically . A child’s squirming or slouching can move the belt out of position. • If the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle. Never allow a child to put the shoulder belt under an arm or behind their back.
Here are some tips on getting the most out of your child restraint: • Before buying any restraint system, make sure that it has a label certifying that it meets all applicable Safety Standards. The manufacturer also recommends that you try a child restraint in the vehicle seats where you will use it before you buy it.
connection to the top tether anchorages have been avail- able for some time. For some older child restraints, many child restraint manufacturers offer add-on tether strap kits or retrofit kits. Y ou are urged to take advantage of all the available attachments provided with your child re- straint in any vehicle.
The rear seat lower anchorages are round bars, located at the rear of the seat cushion where it meets the seat back, and are just visible when you lean into the rear seat to install the child restraint. Y ou will easily feel them if you run your finger along the intersection of the seatback and seat cushion surfaces.
means of adjusting the tension in the strap. Forward- facing toddler restraints and some rear -facing infant restraints will also be equipped with a tether strap, a hook for attachment to the tether strap anchorage and a means of adjusting the tension of the strap.
belt. However , any seat belt system may loosen with time, so check the belt occasionally , and pull it tight if necessary . If the seat belt has an automatic locking r etractor , pull the belt from the retractor until there is enough to allow you to pass through the child restraint and slide the latch plate into the buckle.
T o attach a child restraint tether strap: Route the tether strap over the seat back and attach the hook to the tether anchor located on the back of the seat. For the outboard seating positions, route the tether underneath the headrest and attach the hook to the tether anchor located on the back of the seat.
ENGINE BREAK-IN RECOMMENDA TIONS A long break-in period is not requir ed for the engine in your new vehicle. Drive moderately during the first 300 miles (500 km). After the initial 60 miles (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable.
W ARNING! It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.
inspect the exhaust system each time the vehicle is raised for lubrication or oil change. Replace as requir ed. W ARNING! • Exhaust gases can injure or kill. They contain carbon monoxide (CO) which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you.
Defroster Check operation by selecting the defrost mode and place the blower control on high speed. Y ou should be able to feel the air directed against the windshield.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS m Mirrors ............................... 8 8 ▫ Inside Day/Night Mirror ................. 8 8 ▫ Automatic Dimming Mirror — If Equipped .... 8 8 ▫ Outside Mirrors ....................... 8 9 ▫ Exterior Mirrors Folding Feature — If Equipped .
m Seats ................................ 1 1 8 ▫ Manual Front Seat Adjustments ........... 1 1 8 ▫ Power Seat — If Equipped ............... 1 2 1 ▫ Head Restraints ...................... 1 2 2 ▫ Heated Seats — If Equipped ............. 1 2 3 ▫ 60/40 Split Folding Rear Seat W ith Fold Flat Feature .
▫ Flash T o Pass ........................ 1 3 7 ▫ Interior Lights ....................... 1 3 8 m W indshield W ipers And W ashers ............ 1 4 0 ▫ Intermittent W iper System ............... 1 4 1 ▫ Mist Feature ......................... 1 4 2 ▫ Headlights W ith W ipers (A vailable W ith Auto Headlights Only) .
▫ Using HomeLink t ..................... 1 5 9 ▫ Reprogramming a Single HomeLink t Button ............................. 1 6 0 ▫ Security ............................ 1 6 0 ▫ T roubleshooting T ips ................... 1 6 0 ▫ General Information .
m Power Inverter — If Equipped ............. 1 7 0 m Cup Holders .......................... 1 7 2 m Storage .............................. 1 7 3 ▫ Front Storage Compartment .............. 1 7 3 ▫ Console Storage Compartment ............ 1 7 3 m Cargo Area Features .
MIRRORS Inside Day/Night Mirror Adjust the mirror to center on the view through the rear window . A two-point pivot system allows for horizontal and vertical mirror adjustment. Annoying headlight glare can be reduced by moving the small control under the mirror to the night position (toward rear of vehicle).
CAUTION! T o avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror . Apply the solution onto a clean cloth and wipe the mirror clean.
Exterior Mirrors Folding Feature — If Equipped Some models have exterior mirrors that ar e hinged. The hinge allows the mirr or to pivot forwar d and r earward to resist damage. The hinge has three detent positions, forward, rearward, and normal. Power Remote Control Mirrors The power mirror switch is located on driver’s door trim panel.
Models with Express Window Featur e Press and release the mirror select button marked L or R and then press one of the four arrow buttons to move the mirror in the direction the arrow is pointing. The selec- tion will time out after 30 seconds of inactivity to guard against accidentally moving a mirror position following an adjustment.
Sun V isor “Slide-Out” Feature — If Equipped The sun visor “slide-on r od” featur e allows for additional flexibility in positioning the visor to block out the sun. 1. Fold down sun visor . 2. Unclip visor from center clip. 3. Pull the sun visor toward inside rearview mirror to extend.
UConnect t allows you to transfer calls between the system and your cellular phone as you enter or exit your vehicle, and enables you to mute the system’s micr o- phone for private conversation. The UConnect t phone book enables you to store up to 32 names and four numbers per name.
you may not be able to use any UConnect t features. Refer to your cellular service provider or the phone manufacturer for details. The UConnect t system is fully integrated with the vehi- cle’s audio system.
V oice Command T ree Refer to “V oice T ree” at the end of this section. Help Command If you need assistance at any prompt, or if you want to know your options at any prompt, say 9 Help 9 following the beep. The UConnect t system will play all the options at any prompt if you ask for help.
Y ou can enter any four-digit pin number . Y ou will not need to remember this pin number after the initial pairing process. • For identification purposes, you will be prompted to give the UConnect t system a name for your cellular phone. Each cellular phone that is paired should be given a unique phone name.
• The UConnect t system will confirm the phone num- ber and then dial. The number will appear in the display of certain radios. Call by Saying a Name • Press the “Phone” button to begin. • After the 9 Ready 9 prompt and the following beep, say “Call.
• When prompted, recite the phone number for the phone book entry that you are adding. After you are finished adding an entry into the phone book, you will be given the opportunity to add more phone numbers to the curr ent entry or to r eturn to the main menu.
Edit Entries in the UConnect t Phonebook NOTE: Editing names in the phone book is recom- mended when vehicle is not in motion. • Press the “Phone” button to begin. • After the 9 Ready 9 prompt and the following beep, say 9 Phonebook Edit. 9 • Y ou will then be asked for the name of the phone book entry that you wish to edit.
from the list, press the 9 V oice Recognition 9 button while the UConnect t system is playing the desired entry and say 9 Delete. 9 • After you enter the name, the UConnect t system will ask you which designation you wish to delete, home, work, mobile, pager , or all.
• The UConnect t system will then prompt you as to the number designation you wish to call. • The selected number will be dialed. Phone Call Features The following features can be accessed through the UConnect t system if the feature(s) are available on your cellular service plan.
entry you wish to call. The first call will be on hold while the second call is in progress. T o go back to the first call, refer to 9 T oggling Between Calls. 9 T o combine two calls, refer to 9 Conference Call. 9 Place/Retrieve a Call from Hold T o put a call on hold, press the 8 Phone’ button until you hear a single beep.
hold may not become active automatically . This is cell phone dependent. T o bring the call back from hold, press and hold the “Phone” button until you hear a single beep. Redial • Press the “Phone” button to begin. • After the 9 Ready 9 prompt and the following beep, say 9 Redial.
UConnect T System Features Language Selection T o change the language that the UConnect t system is using, • Press the “Phone” button to begin. • After the 9 Ready 9 prompt and the following beep, say the name of the language you wish to switch to (English, Espanol, or Francais, if so equipped).
The UConnect t system does slightly lower your chances of successfully making a phone call as to that for the cell phone directly . Y our phone must be turned on and paired to the UCon- nect t system to allow use of this vehicle feature in emergency situations when the cell phone has network coverage and stays paired to the UConnect t system.
service or automated customer service. Some services requir e immediate response selection, in some instances, that may be too quick for use of UConnect t system.
a { , 9 you could press the “V oice Recognition” button and say 9 Pair a Phone 9 to select that option without having to listen to the rest of the voice prompt. T urning Confirmation Prompts On/Off T urning confirmation prompts off will stop the system from confirming your choices (e.
may feel that the call did not go through even though the call is in progr ess. Once your call is answered, you will hear the audio. Mute/Un-Mute (Mute Off) When you mute the UConnect t system, you will still be able to hear the conversation coming from the other party , but the other party will not be able to hear you.
List Paired Cellular Phone Names • Press the “Phone” button to begin. • After the “Ready” prompt and the following beep, say “Setup Phone Pairing.” • When prompted, say 9 List Phones. 9 • The UConnect t system will play the phone names of all paired cellular phones in order from the highest to the lowest priority .
• Y ou can also press the “V oice Recognition” button anytime while the list is being played, and then choose the phone you wish to delete. Things Y ou Should Know About Y our UConnect T System UConnect t T utorial T o hear a brief tutorial of the system features, press the “Phone” button and say “UConnect t T utorial.
• Always wait for the beep before speaking. • Speak normally , without pausing, just as you would speak to a person sitting approximately eight (8) feet away from you. • Make sure that no one other than you is speaking during a voice recognition period.
• Even though international dialing for most number combinations is supported, some shortcut dialing number combinations may not be supported. • In a convertible vehicle, system performance may be compromised with the convertible top down.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 113 3 I n f o r m a t i o n P r o v i d e d b y :.
1 14 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 115 3 I n f o r m a t i o n P r o v i d e d b y :.
V oice Commands Primary Alternate(s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location all V oice Commands Primary Alternate(s) call cancel confirmation prompts.
V oice Commands Primary Alternate(s) language list names list phones mobile mute mute off new entry no pager pair a phone phone pairing pairing phonebook phone book previous recor d again redial V oic.
General Information This device complies with part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired op- eration.
W ARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust any seat only while the vehicle is parked.
W ARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked.
Power Seat — If Equipped The power seat switch is on the outboard side of the seat near the floor . For vehicles equipped with a power driver’s seat, use this switch to move the seat up, down, forward, rearwar d, or to tilt the seat. For vehicles equipped with a power passenger seat, use this switch to move the seat forward and rearward.
CAUTION! Do not place any article under any seat as it may cause damage to the seat controls. W ARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured.
Heated Seats — If Equipped Heated seats pr ovide comfort and warmth on cold days and can help soothe sore muscles and backs. The heaters provide the same heat level for both cushion and back. The driver and front passenger seats are heated. The controls for each heater ar e located near the bottom center of the instrument panel.
Press the switch once to select high-level heating. Press the switch a second time to select low-level heating. Press the switch a third time to shut off the heating elements. When high-temperature heating is selected, the heaters provide a boosted heat level during the first four minutes of operation after heating is activated.
NOTE: Prior to folding the rear seat, it may be necessary to position the front seat to its mid-track position. Also, be sure that the front seats are fully upright and posi- tioned forwar d. This will allow the rear seat to fold down easily . W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle.
4. If desired, push down on the seatback to lock it in the folded position. T o Raise the Rear Seat NOTE: If interfer ence from the cargo area prevents the seatback from fully locking, you will have difficulty returning the seat to its proper position.
DRIVER MEMOR Y SEA T — IF EQUIPPED This feature allows the driver to store up to two differ ent memory profiles, for easy r ecall through a memory switch. Each memory profile contains desired position settings for the driver seat and side mirrors, and a set of desired radio station presets.
NOTE: • For vehicles equipped with an automatic transmission, memory profiles can be set without the vehicle in “P” (Park), but the vehicle must be in “P” (Park) to recall a memory profile. • For vehicles equipped with a manual transmission, the vehicle speed must be at 0 mph (0 km/h) to recall a memory profile.
NOTE: Y our transmitters can be unlinked to the memory setting by pressing the Set (S) button followed by the Unlock button on the transmitter in Step 4 above. Memory Position Recall NOTE: • For vehicles equipped with an automatic transmission, the vehicle must be in “P” (Park) to recall memory positions.
The distance the driver seat moves depends on where you have the driver seat positioned when you r emove the key from the ignition switch. • When you remove the key fr om the ignition switch, the driver seat will move about 2.4 inches (60 mm) rearwar d if the driver seat position is greater than or equal to 3.
TO OPEN AND CLOSE THE HOOD T wo latches must be released to open the hood. First, pull the hood release lever located under the left side of the instrument panel. Next, locate the safety latch lever between the grille and hood opening (left of center when facing hood).
Use the hood pr op rod to secure the hood in the open position. Place the upper end of the prop rod in the hole on the underside of the hood. T o prevent possible damage: • Before closing hood, make sure the hood prop rod is fully seated into its storage retaining clips.
LIGHTS Exterior & Interior Lighting Control The Multi-Function Control Lever on the left side of the steering column controls the operation of the headlights, parking lights, turn signal lights, instrument panel lights, instrument panel light dimming, interior lights, and fog lights (if equipped).
Automatic Headlights — If Equipped This system automatically turns the headlights ON or OFF according to ambient light levels. T o turn the system ON, turn the end of the Multi-Function Control Lever to the (A) AUTO position (thir d detent). When the system is ON, the Headlight T ime Delay feature is also ON.
interval begins when you turn of f the headlights. Only the headlights will illuminate during this time. If you turn the headlights, or parking lights, or ignition switch on again, the system will cancel the delay . If you turn the headlights off before the ignition, they will turn off in the normal manner .
Fog Lights — If Equipped T o activate the fr ont fog lights, turn on the parking lights or the low beam headlights and pull out on the end of the Multi-Function Control Lever . NOTE: The front fog lights will only operate with the headlights on low beam.
Y ou can signal a lane change by moving the lever upward or downward partially without moving beyond the de- tent. If either turn signal indicator has a very fast flash rate, check for a defective outside light bulb. If an indicator fails to light when the lever is moved, see your autho- rized dealer for service.
NOTE: If the Multi-Function Control Lever is held in the Flash to Pass position for more than 15 seconds, the high beams will shut off. If this occurs, wait 30 seconds before activating the Flash to Pass function again.
Instrument Panel Dimming W ith the parking lights or headlights on, rotate the Dimmer Contr ol upwar d or downwar d to change the brightness of the instrument panel lights.
WINDSHIELD WIPERS AND W ASHERS The W indshield W iper / W asher Control Lever is located on the right side of the steering column. Rotate the end of the lever to the first detent past the intermittent settings for Low-speed wiper operation, or to the second detent past the intermittent settings for High-speed wiper operation.
CAUTION! • T urn the windshield wipers off when driving through an automatic car wash. Damage to the windshield wipers may result if the wiper control is left in any position other than OFF . • In cold weather , always turn off the wiper switch and allow the wipers to return to the park position before turning of f the engine.
W ARNING! Sudden loss of visibility through the windshield could lead to an accident. Y ou might not see other vehicles or other obstacles. T o avoid sudden icing of the windshield during freezing weather , warm the windshield with defroster before and during wind- shield washer use.
Headlights with Wipers (A vailable with Auto Headlights Only) When this feature is active, the headlights will turn ON approximately 10 seconds after the wipers are turned on if the Multi-Function Contr ol Lever (on the left side of the steering column) is placed in the (A) AUT O position.
NOTE: • The rain-sensing feature will not operate when the wiper speed is in the LOW or HIGH position. • The rain-sensing feature may not function properly when ice or dried salt water is present on the wind- shield. • Use of Rain-X t or products containing wax or silicone may reduce rain sensor performance.
remote start mode is exited. Refer to “Remote Start System” in Section 2 of this manual for information on remote start operation. Windshield W ashers T o use the washer , pull the W indshield W iper / W asher Control lever toward you and hold it for as long as washer spray is desired.
TIL T STEERING COLUMN This feature allows you to tilt the steering column upward or downward. The tilt control handle is located below the steering wheel at the end of the steering column. T o unlock the steering column, push the control handle downward.
ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, this device takes over the accelerator operation at speeds greater than 25 mph (40 km/h). Electronic Speed Control Operation The speed control lever is located on the right side of the steering wheel.
W ARNING! Leaving the Electronic Speed Control system on when not in use is dangerous. Y ou could accidentally set the system or cause it to go faster than you want. Y ou could lose control and have an accident. Always leave the system OFF when you are not using it.
T o Resume Speed: If you deactivated the speed control without erasing the set speed from memory and your vehicle speed is above 20 mph (32 km/h) you can resume the previous set speed. T o do so, push the lever up and release (RESUME ACCEL), and then remove your foot from the accelerator pedal.
V ehicles equipped with a manual transmission may need to be shifted into a lower gear to climb hills without speed loss. W ARNING! Speed Control can be dangerous where the system can’t maintain a constant speed. Y our vehicle could go too fast for the conditions, and you could lose control.
• When you move the shift lever to “R” (Reverse) position and the Rear Park Assist System is turned off, a single chime will sound once per ignition cycle and the instrument cluster will display “P ARK ASSIST DISABLED.” • The Rear Park Assist System, when on, will MUTE the radio when it is sounding a tone.
W ARNING! • Drivers must be careful when backing up even when using the Rear Park Assist System. Always check carefully behind your vehicle, look behind you, and be sure to check for pedestrians, animals, other vehicles, obstructions, and blind spots before back- ing up.
System Operation The system uses four sensors located in the r ear bumper fascia to scan for obstacles up to 79 inches (200 cm) away from the r ear bumper fascia. The warning display located above the rear window provides both visible and audible warnings to indicate the range of the object.
When the ignition is turned to the ON position, and the system is enabled, the warning display will turn ON all of its LEDs for approximately one second. Then, the system dimly illuminates the two outer most yellow LEDs when it is detecting no obstacles.
GARAGE DOOR OPENER — IF EQUIPPED HomeLink t r eplaces up to three remote controls (hand held transmitters) that operate devices such as garage door openers, motorized gates, lighting, or home security systems. The HomeLink t unit operates off your vehicle’s battery .
W ARNING! V ehicle exhaust contains carbon monoxide, a danger- ous gas. Do not run your vehicle in the garage while training the transceiver . Exhaust gas can cause seri- ous injury or death. Programming HomeLink T Before Y ou Begin If you have not trained any of the HomeLink t buttons, erase all channels before you begin training.
NOTE: • Some gate operators and garage door openers may requir e you to replace Step #3 with procedures noted in the “Gate Operator/Canadian Programming” sec- tion.
This can usually be found where the hanging antenna wire is attached to the garage door opener motor (it is NOT the button normally used to open & close the door). 6. Firmly press and release the “learn” or “training” button. The name and color of the button may vary by manufacturer .
Gate Operator/Canadian Programming Canadian radio-frequency laws requir e transmitter sig- nals to “time-out” (or quit) after several seconds of transmission – which may not be long enough for HomeLink t to pick up the signal during programming.
Reprogramming a Single HomeLink T Button T o r e-program a channel that has been previously trained, follow these steps: 1. T urn the ignition switch to the ON/RUN position. 2. Press and hold the desired HomeLink t button until the indicator light begins to flash after 20 seconds.
General Information This device complies with FCC rules part 15 and Industry Canada RSS-210. Operation is subject to the following two conditions: 1. This device may not cause harmful interference 2.
W ARNING! • Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death.
sunroof will automatically r etract. Remove the obstruc- tion if this occurs. Next, press the switch forward and release to Express Close. Pinch Protect Override If a known obstruction (ice, debris, etc.) prevents closing, press the switch forwar d and hold.
Sunroof Maintenance Use only a non-abrasive cleaner and a soft cloth to clean the glass panel. Ignition Off Operation For vehicles not equipped with the Electronic V ehicle Information Center (EVIC), the power sunroof switch will remain active for 45 seconds after the ignition switch is turned to the LOCK position.
CAUTION! • Never attempt to open or close the Sky Slider t when it is frozen. W ait until the Sky Slider t is thawed before operating. • Opening the Sky Slider t when damp, wet, or dirty can cause stains, mildew , and damage to the soft-top material and the inside of your vehicle.
Power T op Control The Power T op switch is located between the sun visors on the overhead console. NOTE: The Power T op switch will operate when the ignition switch is turned to the ON or ACC position, and when the accessory delay feature is active.
NOTE: The Sky Slider t will not open from the front and the rear at the same time. The Sky Slider t must close fully before opening it from the opposite end. Using Operator Mode Press the switch rearwar d and hold it and the Sky Slider t will open from the front and move toward the rear of the vehicle.
T o resume the operation from a partially closed position, press and hold the switch once again. Manually The Sky Slider t drive motors are mounted to the roof above the cargo lamp. In the event that your vehicle losses battery power , you can close the Sky Slider t by turning the drive gears in the appropriate motor with a 6 mm Allen wrench.
windows open, then open the front and rear windows together to minimize the buf feting. If the buffeting occurs with the Sky Slider t open, adjust the Sky Slider t opening to minimize the buffeting or open any window . Sky Slider T Maintenance Refer to “Sky Slider t T op Care” under “Maintaining Y our V ehicle” in Section 7 of this manual.
Electrical Outlet Use With Engine Off CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery , even when not in use (i.e. cellular phones, etc.). Eventually , if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent engine starting.
A control switch for the outlet is located in the lower switch bank below the climate controls. Press and r elease the switch once to turn on the power outlet. A status indicator in the switch will illuminate in approximately one second to indicate that power is available at the outlet.
CUP HOLDERS Front and r ear cup holders are located in the center console. Front Cup Holders Rear Cup Holders 172 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y.
STORAGE Front Storage Compartment The fr ont storage compartment (located on the left side of the instrument panel) can hold cell phones, PDA’s, and other small items.
The center console has a r emovable storage tray , which can hold cell phones, PDA’s, and other small items. CARGO AREA FEA TURES Cargo Load Floor The cargo load floor system has a load capacity of 400 lbs (181 kg). The load floor has a built-in storage bin that can hold a variety of items.
2. Pull the loops upward and twist them 1 ⁄ 4 turn so that they are parallel to the slots in the storage bin cover . 3. Lift the cover upward over the loops. 4. When done, reinstall the cover with the handle recess facing toward you. NOTE: Y ou can install the cover with either side facing upward.
Cargo T ie-Down Hooks & Loops The tie-downs located on cargo ar ea floor should be used to secure loads safely when the vehicle is moving. NOTE: The spring-loaded latches that retain the storage bin cover to the cargo load floor should not be used as cargo tie-downs.
W ARNING! • Cargo tie-downs are not safe anchors for a child seat tether strap. In a sudden stop or collision, a tie-down could pull loose and allow the child seat to come loose. A child could be badly injured. Use only the anchors provided for child seat tethers.
Retractable Cargo Area Cover — If Equipped NOTE: The purpose of this cover is for privacy , not to secure loads. It will not prevent car go from shifting or protect passengers from loose cargo. The r emovable retractable cargo ar ea cover mounts in the cargo area behind the top of the rear seats.
Next, grab the cover handle and pull the cover toward you. As the cover nears the liftgate opening, guide the rear attachment posts (on both ends of the cover) into the notches in the trim panels. Then, lower the cover to position the posts into the bottom of the notches and release the handle.
REAR WINDOW FEA TURES Rear Window Wiper/W asher — If Equipped The Rear W indow W iper / W asher Control is located on the right side of the steering column. The r otary ring switch on the lever contr ols r ear wiper and washer operation. Rotate the switch upwar d to the first detent to activate the r ear wiper .
CAUTION! • T urn the rear wiper off when driving through an automatic car wash. Damage to the rear wiper may result if the rear wiper control is left in the ON position. • In cold weather , always turn off the rear wiper switch and allow the rear wiper to return to the park position before turning off the engine.
CAUTION! • Use care when washing the inside of the rear window . Do not use abrasive window cleaners on the interior surface of the window . Use a soft cloth and a mild washing solution, wiping parallel to the heating elements. Labels can be peeled off after soaking with warm water .
CAUTION! T o avoid damage to the roof rack and vehicle, do not exceed the maximum roof rack load capacity . Always distribute heavy loads as evenly as possible and secure the load appropriately . Long loads, which extend over the windshield, such as wood panels or surfboards, should be secured to both the front and rear of the vehicle.
I n f o r m a t i o n P r o v i d e d b y :.
INSTRUMENT P ANEL AND CONTROLS CONTENTS m Instrument Panel Features ................. 1 8 8 m Instrument Cluster ...................... 1 8 9 m Instrument Cluster Descriptions ............ 1 9 0 m Electronic V ehicle Information Center (EVIC) — If Equipped .
m Sales Code REQ — AM/FM Stereo Radio And 6–Disc CD/DVD Changer (MP3/WMA AUX Jack) ................................ 2 2 2 ▫ Operating Instructions - Radio Mode ....... 2 2 3 ▫ Operation Instructions - (Disc Mode For CD And MP3/WMA Audio Play , DVD-V ideo) .
▫ Electronic Serial Number/Sirius Identification Number (ENS/SID) .................... 2 5 4 ▫ Selecting Satellite Mode ................. 2 5 5 ▫ Satellite Antenna ...................... 2 5 5 ▫ Reception Quality ..................... 2 5 5 ▫ Operating Instructions - Satellite Mode .
INSTRUMENT P ANEL FEA TURES 1 — Air Outlet 5 — Radio 9 — Lower Switch Bank 2 — Instrument Cluster 6 — Glove Box 10 — Storage Bin* 3 — Storage T ray 7 — Climate Control * If Equipped 4 .
INSTRUMENT CLUSTER INSTRUMENT P ANEL AND CONTROLS 189 4 I n f o r m a t i o n P r o v i d e d b y :.
INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge The fuel gauge shows level of fuel in tank when ignition switch is in the ON position. (See page 359 for more information.) 2. Fuel Cap Indicator This symbol indicates the side of the vehicle where the fuel cap is located.
significantly under-inflated tire causes the tire to over- heat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tir e tread life, and may af fect the vehicle’s handling and stopping ability .
CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system opera- tion or sensor damage may result when using re- placement equipment that is not of the same size, type, and/or style.
6. Malfunction Indicator Light This light is part of an onboard diagnostic system called OBD that monitors emissions, engine, and automatic transmission contr ol systems.
8. Front Fog Light Indicator Light — If Equipped This light shows when the fog lights are ON. (See page 133 for more information.) 9. Speedometer Shows the vehicle speed. 10. T urn Signal Indicator Light The left or right arr ow will flash in unison with the corresponding front and rear turn signal lights when the turn signal switch is operated.
13. Oil Pressur e W arning Light This light shows low engine oil pressur e. The light will turn on and remain on when the ignition switch is turned from the LOCK or ACC position to the ON position. The light will turn off after the engine is started. If the light does not turn on during starting, have the system checked by an authorized dealer .
16. 4 LOW Mode Indicator Light — If Equipped This light alerts the driver that the vehicle is in the 4WD LOW mode. In this mode, the front driveshaft and rear driveshaft are mechanically locked together forcing the front and rear wheels to rotate at the same speed.
cluster comes on when the ignition switch is turned to the “ON” position. It should go out with the engine running. If the “ESP/BAS W arning Lamp” comes on continuously with the engine running, a malfunction has been detected in either the ESP or the BAS system, or both.
NOTE: As the coolant temperature gauge approaches 9 H, 9 this indicator will illuminate and a single chime will sound. Further overheating will cause the temperature gauge to pass 9 H. 9 In this case, the indicator will flash continuously and a continuous chime will sound, until the engine is allowed to cool.
the air conditioner is on, turn it off. Also, shift the transmission into “N” (Neutral) and idle the vehicle. If the needle remains on the “H” mark, turn the engine off immediately and call for service. (See page 384 for more information.) NOTE: The gauge pointer will remain near its last reading when the engine is turned off.
once again to display the outside temperature and com- pass heading in the screen below the speedometer . Refer to “V acuum Fluorescent Display” for details Resetting the T rip Odometer Display the trip mileage that you want to reset, “T rip A” or “T rip B.
NOTE: If the instrument cluster is equipped with the optional Electr onic V ehicle Information Center (EVIC), then most warnings will display in the EVIC.
2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. T urn the ignition switch to the LOCK position. NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary , repeat this procedur e.
NOTE: The light may flash momentarily during sharp cornering maneuvers, which can change fluid level con- ditions. The vehicle should have service performed, and the brake fluid level checked. If brake failure is indicated, immediate repair is neces- sary .
32. V ehicle Security Alarm Indicator Light — If Equipped This light will flash rapidly for approximately 16 seconds when the vehicle security system is arming and then flash slowly when the system is armed. The light will also turn on for about three seconds when the ignition is first turned ON.
NOTE: Magnetic materials should be kept away from the top of the right rear quarter window . This is where the compass sensor is located. NOTE: The vehicle speed must be at 0 mph (0 km/h) (manual transmission) or the gear selector lever in “P” (Park) (auto transmission) to enter the variance setting mode.
NOTE: The factory default zone is 8. During program- ming, the zone value will wrap around from zone 15 to zone 1. Calibrating the Compass (Mid Line Cluster Only) If the compass appears erratic, inaccurate, or abnormal, you may wish to calibrate it.
• Compass display • Outside temperature display • T rip computer functions • UConnect™ hands-free communication system dis- plays (If Equipped) • Navigation system screens (If Equipped) .
Electronic V ehicle Information Center (EVIC) Displays When the appropriate conditions exist, the Electronic V ehicle Information Center (EVIC) displays the following messages: • T urn Signal On (wi.
• Door(s) Ajar (with a single chime if vehicle is in motion) • Liftgate Ajar (with a single chime) • Left Front Low Pressur e (with a single chime). Refer to “T ire Pressure Monitoring System” in Section 5 of this manual. • Left Rear Low Pressure (with a single chime).
Unless reset, this message will continue to display each time you turn the ignition switch to the ON position. T o turn off the message temporarily , press and release the Menu button. T o reset the oil change indicator system (after performing the scheduled maintenance) perform the following procedur e: 1.
history information will be erased, and the averaging will continue from the last fuel average reading before the reset. • Distance T o Empty (DTE) Shows the estimated distance that can be traveled with the fuel remaining in the tank.
seconds of resetting the currently displayed function (>Reset ALL will display during this 3 second window). Compass Display The compass readings indicate the dir ection the vehicle is facing. Press and release the compass button to display one of eight com- pass readings and the outside temperature.
Compass V ariance Compass V ariance is the differ ence between magnetic North and Geographic North. In some ar eas of the country , the differ ence between magnetic and geographic North is great enough to cause the compass to give false readings.
1. T urn the ignition switch ON. 2. Press and hold the compass button for approximately 2 seconds. 3. Press the SCROLL button until “Compass V ariance” message and the last variance zone number displays in the EVIC. 4. Press and r elease FUNCTION SELECT button until the proper variance zone is selected according to the map.
The EVIC displays this symbol to indicate an incoming call. The EVIC displays this symbol to indicate that the UConnect™ phone is currently in analog mode. The EVIC displays this symbol to indicate that the UConnect™ phone is currently roaming. The EVIC displays this symbol to indicate that you have voice mail.
The EVIC displays this symbol to indicate that a phone connection has been made. The EVIC displays this symbol to indicate that the Connect™ phone is currently not available.
details. For vehicles equipped with sales code RER radio, refer to your “Navigation User’s Manual” for UCon- nect™ system operating instructions. Lock Doors Automatically at 15 mph (24 km/h) When ON is selected, all doors will lock automatically when the vehicle reaches a speed of 15 mph (24 km/h).
FUNCTION SELECT button until “ON” or “OFF” ap- pears. Refer to “Driver Memory Seat” in Section 3 of this manual for more information. Sound Horn with Remote Key Lock When ON is selected, a short horn sound will occur when the remote keyless entry “Lock” button is pressed.
selected. T o make your selection, press and release the FUNCTION SELECT button until “ON” or “OFF” ap- pears. Headlights On with W ipers (A vailable with Auto Headlights Only) When ON is selected, and the headlight switch is in the AUTO position, the headlights will turn on approxi- mately 10 seconds after the wipers are turned on.
your selection, press and release the FUNCTION SE- LECT button until “Of f,” “45 sec.,” “5 min.,” or “10 min.” appears. Illumination Approach When this feature is selected, the headlights will activate and remain on for up to 90 seconds when the doors are unlocked with the remote keyless entry transmitter .
RADIO GENERAL INFORMA TION Radio Broadcast Signals Y our new radio will provide excellent reception under most operating conditions. Like any system, however , car radios have performance limitations, due to mobile op- eration and natural phenomena, which might lead you to believe your sound system is malfunctioning.
45 seconds after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature. NOTE: For vehicles equipped with the EVIC, the radio and steering wheel radio controls (if equipped) will remain active for up to 10 minutes after the ignition switch is turned to the LOCK position.
Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Press the ON/VOL control to turn the radio ON. Pr ess the ON/VOL a second time to turn OFF the radio.
Phone Button (UConnect™ Hands Free Phone) — If Equipped Press this button to operate the Hand Free Phone (UCon- nect™) feature (if equipped). Refer to “Hands-Free Com- munication (UConnect™)” in Section 3 for mor e informa- tion.
R W/FF (Radio Mode) Pressing the rewind or fast forward button causes the tuner to search for the next frequency in the direction of the arrows. This feature operates in either AM, FM or Satellite (if equipped) frequencies.
program format type to be selected. Many radio stations do not currently broadcast Music T ype information. T oggle the Music T ype button to select the following format types: Program T ype 16 Digit-.
By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to the next frequency station with the same selected Music T ype name.
• Angle – Repeatedly Pressing SELECT will change the viewing angle if supported by the DVD disc (If Equipped). NOTE: The available selections for each of the above entries varies depending upon the disc. NOTE: These selections can only be made while playing a DVD.
Audio Language — If Equipped Selecting this item will allow the user to choose a default audio language (effective only if language supported by disc).
NOTE: The user will have to set these defaults befor e loading a disc. If changes are made to these settings after a disc is loaded, changes will not be effective. Also, the defaults are effective only if the disc supports the customer-pr eferred settings.
Operation Instructions - (DISC MODE for CD and MP3/WMA Audio Play , DVD-VIDEO) The radio DVD player and many DVD discs ar e coded by geographic region. These region codes must match in order for the disc to play . If the region code for the DVD disc does not match the region code for the radio DVD player , it will not play the disc.
Eject Button — Ejecting Compact Disc(s) Press the eject button and the push-button with the corresponding number (1-6) wher e the CD was loaded and the disc will unload and move to the entrance for easy removal. Radio display will show 9 EJECTING DISC 9 when the disc is being ejected and prompt the user to remove the disc.
Notes On Playing MP3/WMA Files The radio can play MP3/WMA files; however , acceptable MP3/WMA file r ecording media and formats are limited. When writing MP3/WMA files, pay attention to the following restrictions.
If a disc contains multi formats, such as CD audio and mp3/wma tracks, the radio will only play the mp3/wma tracks on that disc. Supported MP3/WMA File Formats The radio will recognize only files with the *.MP3/WMA extension as MP3/WMA files. Non-MP3/WMA files named with the *.
Playback of MP3/WMA Files When a medium containing MP3/WMA data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3/WMA files.
Press and hold the INFO button again for 3 seconds to return to 9 elapsed time 9 display . Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the use.
Operating Instructions - Hands Free Phone (UConnect™) (If Equipped) Refer to “Hands-Free Communication (UConnect™)” in Section 3 of this manual. Operating Instructions - Satellite Radio Mode (If Equipped) Refer to “Satellite Radio” in this section.
player , USB port, 20 gigabyte Har d Drive (HDD), and the UConnect t hands-free Bluetooth cellular system. NOTE: If your vehicle is not equipped with UConnect t , the unit will respond with a “Feature Not A vailable” message when selecting controls related to this feature.
camera, and on some models a dual display scr een operation. Refer to your “Navigation User’s Manual” for detailed operating instructions. Operating Instructions — Satellite Radio Refer to your “Navigation User’s Manual” for detailed operating instructions.
Changing Daylight Savings T ime When selected, this feature will display the time of day in daylight savings time. Proceed as follows to change the current setting: 1. T urn on the system. 2. T ouch the screen where the time is displayed. The clock setting menu will appear on the screen.
6. T o save the new time setting, touch the screen where the word “Save” is displayed. Show T ime if Radio is Off When selected, this feature will display the time of day on the touch screen when the system is turned off. Proceed as follows to change the current setting: 1.
Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Press the ON/VOLUME control knob to turn on the radio. Press the ON/VOLUME control knob a second time to turn off the radio.
If your vehicle is not equipped with or this feature is not available on your vehicle, a “Not Equipped W ith UCon- nect” message will display on the radio screen. Phone Button (UConnect™ Hands Free Phone) — If Equipped Press this button to operate the Hand Free Phone (UCon- nect™) feature (if equipped).
Step 2. For vehicles not equipped with satellite radio, press the SETUP button and then follow the above procedur e, starting at Step 2. INFO Button Press the INFO button for an RDS station (one with call letters displayed). The radio will return a Radio T ext message broadcast from an FM station (FM mode only).
Press the rotary TUNE control knob a fifth time and F ADE will display . T urn the TUNE contr ol knob to the left or right to adjust the sound level between the front and rear speakers. Press the rotary TUNE contr ol knob again to exit setting tone, balance, and fade.
Program T ype 16 Digit-Character Display Rhythm and Blues R & B Religious Music Rel Musc Religious T alk Rel T alk Rock Rock Soft Soft Soft Rock Soft Rck Soft Rhythm and Blues Soft R&B Sports .
SET Button — T o Set the Push-Button Memory When you are receiving a station that you wish to commit to push-button memory , press the SET button. The symbol SET 1 will now show in the display window . Select the button (1-6) you wish to lock onto this station and press and release that button.
Inserting Compact Disc(s) Gently insert one CD into the CD player with the CD label facing up. The CD will automatically be pulled into the CD player and the CD icon will illuminate on the radio display . If a CD does not go into the slot more than an inch, a disc may alr eady be loaded and must be ejected before a new disc can be loaded.
If you have ejected a disc and have not removed it within 10 seconds, it will be reloaded. If the CD is not removed, the radio will reinsert the CD but will not play it. A disc can be ejected with the radio and ignition OFF . NOTE: Ejecting with ignition OFF is not allowed on convertible or soft-top models (if equipped).
Press the right SEEK button to move to the next ran- domly selected track. Press the RND button a second time to stop Random Play . Notes On Playing MP3 Files The radio can play MP3 files; however , acceptable MP3 file recording media and formats are limited.
• Level 2: 31 (including a separator 9 . 9 and a 3-character extension) Multisession disc formats are supported by the radio. Multisession discs may contain combinations of normal CD audio tracks and computer files (including MP3 files). Discs cr eated with an option such as 9 keep disc open after writing 9 are most likely multisession discs.
Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files.
Press and hold the INFO button again for 3 seconds to return to 9 elapsed time 9 display . Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack, which allows the use.
SA TELLITE RADIO (RSC) — IF EQUIPPED (RER/REQ/REN RADIOS ONL Y) Satellite radio uses direct satellite to receiver broadcast- ing technology to provide clear digital sound, coast to coast. The subscription service provider is Sirius™ Satel- lite Radio.
selected. Pr ess the TUNE control knob and the Sirius ID number will display . The Sirius ID number display will time out in 2 minutes. Press any button on the radio to exit this screen. Selecting Satellite Mode Press the SA T button until 9 SA T 9 appears in the display .
SEEK Buttons Press and release the SEEK buttons to search for the next channel in Satellite mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new channel until you make another selection. Holding either button will bypass channels without stopping until you release it.
By pressing the SEEK button when the Music T ype function is active, the radio will be tuned to the next channel with the same selected Music T ype name. If a preset button is activated while in the Music T ype (Program T ype) mode, the Music T ype mode will be exited and the radio will tune to the preset channel.
Operating Instructions - Hands Free Phone (If Equipped) Refer to “Hands-Free Communication (UConnect™)” in Section 3 of this manual. Operating Instructions - Video Entertainment System (VES™) (If Equipped) Refer to separate “V ideo Entertainment System (VES™) Guide.
Left-Hand Switch Functions for Radio Operation • Press the top of the switch to SEEK the next listenable station up from the current setting. • Press the bottom of the switch to SEEK the next listenable station down from the current setting. • Press the button in the center of the switch to tune to the next preset that you have programmed.
5. Store the disc in its case after playing. 6. Do not expose the disc to direct sunlight. 7. Do not store the disc where temperatures may become too high. CLIMA TE CONTROLS The Air Conditioning and Heating System is designed to make you comfortable in all types of weather .
Blower Control Use this control to regulate the amount of air for ced through the ven- tilation system in any mode. The blower speed increases as you move the control to the right from the “O” (Off) position.
• Panel Air is directed through the outlets in the instru- ment panel. These outlets can be adjusted to direct airflow . NOTE: The center instrument panel outlets can be aimed so that they are directed toward the rear seat passengers for maximum airflow to the rear .
NOTE: The air conditioning compr essor operates in Mix and Defrost, or a blend of these modes, even if the Air Conditioning Snowflake button is not pressed. This de- humidifies the air to help dry the windshield. T o improve fuel economy , use these modes only when necessary .
• MAX A/C For maximum cooling use the A/C and r ecirculation buttons at the same time. • Economy Mode If economy mode is desir ed, pr ess the A/C button to turn off the indicator light and the A/C compressor . Then, move the temperature control to the desir ed temperatur e.
cabin infrared sensor mounted between the sun-visors and from various sensors located throughout the vehicle. The controls on the climate contr ol provide the system with operator input. Other sensors take account of ve- hicle speed, A/C pressur e, outside temperature, and engine cooling temperature.
NOTE: • The temperatur e setting can be adjusted at any time without affecting automatic operation. • Pressing the Air Conditioning Control button while in AUTO mode will cause the LED in the control button to flash three times and then turn of f.
INSTRUMENT P ANEL AND CONTROLS 267 4 I n f o r m a t i o n P r o v i d e d b y :.
The operator can override the AUTO mode setting to change airflow distribution by rotating the Mode Contr ol knob (on the right) to one of the following positions. • Panel Air is directed through the outlets in the instru- ment panel. These outlets can be adjusted to direct airflow .
• Air Conditioner Control Press this button to turn on the air conditioning during manual operation only . When the air conditioning is turned on, cool dehumidified air will flow through the outlets selected with the Mode control dial. Press this button a second time to turn off the air conditioning.
• Most of the time, when in Automatic Operation, you can temporarily put the system into Recirculation Mode by pressing the Recirculation Button. However , under certain conditions, while in Automatic Mode, the system is blowing air out the defrost vents.
W indow Fogging Interior fogging on the windshield can be quickly re- moved by turning the mode selector to Defrost. The Defrost/Floor mode can be used to maintain a clear windshield and provide sufficient heating. If side win- dow fogging becomes a problem, increase blower speed.
Control Setting Suggestions for V arious W eather Conditions 272 INSTRUMENT P ANEL AND CONTROLS I n f o r m a t i o n P r o v i d e d b y :.
ST ARTING AND OPERA TING CONTENTS m Starting Procedures ..................... 2 7 7 ▫ Automatic T ransmission ................ 2 7 7 ▫ Manual T ransmission — If Equipped ....... 2 7 7 ▫ Normal Starting ...................... 2 7 7 ▫ Extreme Cold W eather (Below –20°F Or –29°C) .
▫ MP1522 Command-T rac t T ransfer Case — If Equipped ......................... 2 9 2 ▫ MP3022 Selec-T rac II t T ransfer Case — If Equipped ......................... 2 9 8 m On-Road Driving T ips ................... 3 0 3 m Off-Road Driving T ips .
▫ T ire Markings ........................ 3 2 9 ▫ T ire Identification Number (TIN) .......... 3 3 2 ▫ T ire Loading And T ire Pressure ........... 3 3 3 m T ires — General Information ............... 3 3 7 ▫ T ire Pressure .................
▫ Carbon Monoxide W arnings .............. 3 5 8 m Adding Fuel .......................... 3 5 9 ▫ Fuel Filler Cap (Gas Cap) ............... 3 5 9 ▫ Loose Fuel Filler Cap Message ............ 3 6 1 m V ehicle Loading ........................ 3 6 1 ▫ Certification Label .
ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. W ARNING! Do not leave children or animals inside parked vehicles in hot weather . Interior heat build up may cause serious injury or death.
For vehicles equipped with T ip Start, turn the ignition switch to the ST AR T position and release it as soon as the starter engages. The starter motor will continue to run, and it will disengage automatically when the engine is running. If the engine fails to start, the starter will disengage automatically in 10 seconds.
W ithout T ip Start If the engine fails to start after you have followed the “Normal Starting” or “Extreme Cold W eather” proce- dures, it may be flooded. Push the accelerator pedal all the way to the floor and hold it there while cranking the engine.
CAUTION! T o prevent damage to the starter , wait 10 to 15 seconds before trying again. After Starting The idle speed will automatically decrease as the engine warms up. W ARNING! Do not leave children or animals inside parked vehicles in hot weather .
AUTOMA TIC TRANSMISSION CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Shift into “P” (Park) only after the vehicle has come to a complete stop. • Shift into or out of “R” (Reverse) only after the vehicle has come to a complete stop and the engine is at idle speed.
1. Firmly set the parking brake. 2. Using a flat blade screwdriver , carefully remove the shift lock manual override cover , which is located on the PRNDL bezel. 3. Depress and maintain firm pressure on the brake pedal. 4. Using the screwdriver , reach into the manual override opening.
Brake/T ransmission Interlock System This system prevents you from moving the gear shift out of “P” (Park) and into any gear unless the brake pedal is pressed. Always depr ess the brake pedal first, befor e moving the gear selector out of “P” (Park).
“P” (Park) This gear position supplements the parking brake by locking the transmission. The engine can be started in this range. Never use “P” (Park) while the vehicle is in motion. Apply the parking brake when leaving the vehicle in this range.
“N” (Neutral) Shift into “N” (Neutral) when the vehicle is standing for prolonged periods with the engine running. The engine may be started in this range.
NOTE: • If the vehicle is started in extremely cold temperatures, the transmission may not shift into Overdrive. It will however , automatically select the most desirable gear for operation at this temperature. Normal operation will resume when the transmission fluid temperature has risen to a suitable level.
The “TOW/HAUL Indicator Light” will illuminate in the instrument cluster to indicate when the switch has been activated. Pressing the switch a second time restor es normal operation. If the “TOW/HAUL” mode is desir ed, the switch must be pressed each time the engine is started.
A Reset feature allows the vehicle to be driven to a dealer for service without damaging the transmission. T o reset the transmission, perform the following procedur e: 1. Stop the vehicle. 2. Move the selector lever to the “P” (Park) position. 3.
6-Speed Manual T ransmission W ARNING! Y ou or others could be injured if you leave the vehicle unattended without having the parking brake fully applied. The parking brake should al- ways be applied when the driver is not in the vehicle, especially on an incline.
W ARNING! When parking your vehicle, always leave a manual transmission in first gear and apply the parking brake fully to guard against vehicle movement and possible injury or damage.
• When “rocking” a stuck vehicle by shifting between a forward gear and reverse, do not spin wheels faster than 15 mph (24 km/h), or drivetrain damage may result. Recommended Manual T ransmission Shifting Speeds The manufacturer recommends that you use the shift speeds listed in the chart below .
CAUTION! Failure to follow the recommended downshifting speeds may cause the engine to over speed and/or damage the clutch disc even if the clutch pedal is depressed.
CAUTION! • Do not attempt to make a shift while only the front wheels or rear wheels are spinning. The MP1522 Command-T rac t transfer case is not equipped with a synchronizer and therefore the speed of the front driveshaft and rear drive- shaft must be equal for the shift to take place.
Shift Positions The electr onic transfer case switch is located on the center console next to the gear selector lever . 2WD Rear Wheel Drive High Range - Normal street and highway driving.
N Neutral - Disengages both the fr ont driveshaft and rear driveshaft from the powertrain. T o be used for flat towing behind another vehicle. Refer to “Recreational T owing” in this section for more information. T ransfer Case Position Indicator Lights The 4WD indicator lights are located in the instr ument cluster .
2WD to 4WD Lock Move the 4WD Control Switch to the desired position. Shifts between 2WD and 4WD LOCK can be done with the vehicle stopped or in motion. W ith the vehicle in motion, the transfer case will engage / disengage faster if you momentarily release the accelerator pedal after mov- ing the 4WD Contr ol Switch.
Preferr ed Procedur e 1. W ith the engine RUNNING, slow the vehicle speed to 2-3 mph (3-5 km/h). 2. Shift the transmission into “N” (Neutral) (automatic transmission), or depress the clutch pedal (manual trans- mission). 3. While still rolling, move the 4WD Control Switch to the desired position.
original position, make certain all shift r equirements have been met, wait five (5) seconds, and try the shift again. • The ignition switch must be in the ON position for a shift to take place and for the position indicator lights to be operable.
CAUTION! • The 4WD Low position is intended for loose or slippery road surfaces only . Driving in this posi- tion on dry hard surfaced roads may cause in- creased tire wear and damage to the driveline components.
Shift Positions The electr onic transfer case switch is located on the center console next to the gear selector lever . 2WD Rear Wheel Drive High Range - Normal street and highway driving.
Interlocking Ignition System” under “Manual T ransmis- sion” or to “Starting Procedur es” in this section for details. N Neutral - Disengages both the fr ont driveshaft and rear driveshaft from the powertrain. T o be used for flat towing behind another vehicle.
position, make certain all shift requir ements have been met, wait five (5) seconds, and try the shift again. 2WD to 4WD Auto Move the 4WD Control Switch to the desired position. Shifts between 2WD and 4WD Auto can be done with the vehicle stopped or in motion.
2. W ith the ignition switch in the ON position and the engine OFF or RUNNING, shift the transmission into “N” (Neutral) (automatic transmission), or depress the clutch pedal (manual transmission). 3. Move the 4WD Control Switch to the desired position.
conventional 2-wheel drive vehicles any more than low- slung sports cars are designed to perform satisfactorily in off-r oad conditions. If at all possible, avoid sharp turns or abrupt maneuvers. As with other vehicles of this type, failure to operate this vehicle correctly may result in loss of control or vehicle rollover .
caution and maintain a steady controlled speed less than 5 mph (8 km/h) in deep water to minimize wave effects. Flowing W ater If the water is swift flowing and rising (as in storm run-of f) avoid cr ossing until the water level recedes and/or the flow rate is reduced.
Hill Climbing NOTE: Before attempting to climb a hill, determine the conditions at the crest and/or on the other side. Before climbing a steep hill, shift the transmission to a lower gear and shift the transfer case to 4WD Low . Use first gear and 4WD Low for very steep hills.
T raction Downhill Shift the transmission into a low gear and the transfer case to 4WD Low range. Let the vehicle go slowly down the hill with all four wheels turning against engine compression drag. This will permit you to control the vehicle speed and direction.
W ARNING! Abrasive material in any part of the brakes may cause excessive wear or unpredictable braking. Y ou might not have full braking power when you need it to prevent an accident. If you have been operating your vehicle in dirty conditions, get your brakes checked and cleaned as necessary .
Be sure the parking brake is firmly set when parked, and the gear selector lever is in the “P” (Park) position (automatic transmission) or “R” (Reverse) or 1st gear (manual transmission).
W ARNING! • Always apply the parking brake fully when leav- ing your vehicle or it may roll and cause damage or injury . Also, be certain to leave an automatic transmission in “P” (Park) or a manual transmis- sion in “R” (Reverse) or 1st gear .
W ARNING! Significant over or under inflation of tires or mixing sizes of tires or wheels on the vehicle can lead to loss of braking effectiveness. The Anti-Lock Brake System conducts a low-speed self- test at about 12 mph (20 km/h). If you have your foot lightly on the brake while this test is occurring, you may feel slight pedal movement.
W ARNING! • The Anti-Lock Brake System (ABS) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded.
• Do not “ride” the brakes by resting your foot on the pedal. This could overheat the brakes and result in unpredictable braking action, longer stopping dis- tances, or brake damage. • When descending mountains or hills, r epeated brak- ing can cause brake fade with loss of braking contr ol.
NOTE: Increased noise levels at the end of the steering wheel travel are considered normal and do not indicate that there is a problem with the power steering system. Upon initial start-up in cold weather , the power steering pump may make noise for a short amount of time.
T wo additional electronic brake control system options are HDC (Hill Descent Contr ol) and TSC (T railer Sway Control). Y our vehicle may be equipped with one or both of these options. ABS (Anti-Lock Brake System) This system aids the driver in maintaining vehicle contr ol under adverse braking conditions.
TCS (T raction Control System) This system monitors the amount of wheel spin of each of the driven wheels. If wheel spin is detected, brake pressur e is applied to the slipping wheel(s) and engine power is reduced to provide enhanced acceleration and stability .
W ARNING! BAS (Brake Assist System) cannot prevent the natu- ral laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. BAS cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning.
W ARNING! Many factors, such as vehicle loading, road condi- tions, and driving conditions, influence the chance that wheel lift or rollover may occur . ERM (Electronic Roll Mitigation) cannot prevent all wheel lift or rollovers, especially those that involve leaving the roadway or striking objects or other vehicles.
W ARNING! • TSC (T railer Sway Control) cannot stop all trailers from swaying. Always use caution when towing a trailer and follow the tongue weight recommenda- tions. Refer to ”V ehicle Loading” and “T railer T owing” in this section for more information be- fore towing a trailer with your vehicle.
• For vehicles equipped with an automatic transmission, the HSA will work in r everse gear and all forward gears. The system will not activate if the transmission is in “P” (Park). • For vehicles equipped with a manual transmission, the HSA will work in reverse gear , neutral, and all forward gears.
W ARNING! • If you use a trailer brake controller with your trailer , the trailer brakes may be activated and deactivated with the brake switch. If so, there may not be enough brake pressure to hold both the vehicle and the trailer on a hill when the brake pedal is released.
3. Apply the parking brake. 4. Start the engine. 5. Release the clutch pedal (manual transmission). 6. Rotate the steering wheel 1 ⁄ 2 turn to the left. 7. Press the “ESP OFF” button located in the lower switch bank below the climate control four times within twenty seconds.
HDC control speed. Conversely , if more speed is desired during HDC control, the accelerator pedal will increase vehicle speed in the usual manner . When either the brake or the accelerator is released, HDC will control the vehicle at the original set speed.
Press the “Hill Descent” button. The “Hill Descent Control Indicator” light in the instru- ment cluster will turn on solid. NOTE: If the transfer case is not in 4WD low range, the “Hill Descent Control Indicator” light will flash for 5 seconds and HDC will not be enabled.
accelerator and apply as little throttle as possible. Be sure to adapt your speed and driving to the prevailing road conditions. W ARNING! ESP (Electronic Stability Program) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions.
Partial Of f — 2WD V ehicles & 4WD V ehicles in 2WD & 4WD High Range The “Partial Off” mode is intended for driving in deep snow , sand, or gravel. This mode raises the threshold for TCS and ESP activation, which allows for more wheel spin than what ESP normally allows.
mode is over come, turn ESP back on by momentarily depressing the “ESP OFF” button. This may be done while the vehicle is in motion. Full Of f — 4WD V ehicles in 4WD High & 4WD Low Range The.
W ARNING! W ith the ESP switched off, the enhanced vehicle stability offered by ESP is unavailable. In an emer- gency evasive maneuver , the ESP system will not engage to assist in maintaining stability . “Full Off” mode is only intended for off-highway or off-road use.
TIRE SAFETY INFORMA TION Tire Markings NOTE: • P (Passenger)-Metric tire sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall pr eceding the size designation. Ex- ample: P215/65R15 95H. • European Metric tire sizing is based on European design standards.
T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ( ....blank.... ( = Passenger car tire based on European design standards LT = Light T ruck tire based on U.
EXAMPLE: Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry . H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions.
Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire; however , the date code may only be on one side. T ires with white sidewalls will have the full TIN including date code located on the white sidewall side of the tire.
Tire Loading and Tire Pressure T ire Placard Location NOTE: The proper cold tire inflation pressure is listed on either the face of the driver’s door or the driver’s side “B” pillar .
Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. Y ou will not exceed the tire’s load carrying capacity if you adhere to the loadi.
5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer , load from your trailer will be transferred to your vehicle.
336 ST ARTING AND OPERA TING I n f o r m a t i o n P r o v i d e d b y :.
W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, af fect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle.
2. Economy— Improper inflation pressur es can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will r educe tr ead life resulting in a need for earlier tir e r eplacement. Under inflation also increases tire r olling resistance and results in higher fuel consump- tion.
check tire pressure. Do not make a visual judgement when determining pr oper inflation. Radial tir es may look properly inflated even when they are under inflated. CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap (if equipped).
Tire Pressures for High Speed Operation The manufacturer advocates driving at safe speeds within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressure is very important.
W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure some- one. Do not spin your vehicle’s wheels faster than 35 mph (55 km/h) when you are stuck, and do not let anyone near a spinning wheel no matter what the speed.
Life of Tire The service life of a tire is dependent upon varying factors including but not limited to: • Driving style • T ire pressur e • Distance driven W ARNING! T ires and spare tire should be replaced after six years, regardless of the remaining tread.
W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspension dimensions and performance characteristics, result- ing in changes to steering, handling, and braking of your vehicle.
Improper alignment will not cause vehicle vibration. V ibration may be a result of tire and wheel out-of- balance. Proper balancing will reduce vibration and avoid tire cupping and spotty wear . TIRE CHAINS Use only compact chains, or other traction aids that meet SAE type “Class S” specifications.
These cautions apply to all chain traction devices, includ- ing link and cable (radial) chains. TIRE ROT A TION RECOMMENDA TIONS T ires on the front and rear axles of vehicles operate at differ ent loads and perform different steering, handling, and braking functions.
TIRE PRESSURE MONITOR SYSTEM (TPMS) — IF EQUIPPED • The T ire Pressure Monitor System (TPMS) will warn the driver of a low tire pressur e based on the vehicle recommended cold placard pressur e. • The tire pressur e will vary with temperature by about 1 psi (6.
once the system receives the updated tire pressur es. The vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information. − For example, your vehicle may have a recom- mended cold (parked for mor e than 3 hours) placar d pressur e of 33 psi (227 kPa).
NOTE: • The TPMS is not intended to replace normal tire care and maintenance, or to provide warning of a tire failure or condition. • The TPMS should not be used as a tire pressure gauge while adjusting your tire pressure. • Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure.
The matching full size spare wheel and tire assembly (if equipped) has a tire pressure monitoring sensor . The matching full size spare can be used in place of any of the four road tires. The TPMS will only monitor the pressure in the full size spar e when it is used in place of a road tire.
3. Lots of snow or ice around the wheels or wheel housings. 4. Using tire chains on the vehicle. 5. Using wheels/tires not equipped with TPM sensors. NOTE: V ehicles with Full Size Spare 1. The matching full size spar e wheel and tire assembly has a tire pressur e monitoring sensor that can be moni- tored by the TPMS.
the low-pressur e warning limit in any of the four active road tir es. The vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information.
will sound when tire pr essure is low in one or more of the four active road tires. In addition, the Electronic V ehicle Information Center (EVIC) will display a graphic show- ing the pressure values of each tire with the low tir e pressur e values flashing.
If the ignition key is cycled, this sequence will repeat, providing the system fault still exists. If the system fault no longer exists, the T ire Pressure Monitoring T elltale Light will no longer flash, and the 9 CHECK TPM SYS- TEM 9 message will no longer display , and a pr essure value will display in place of the dashes.
upon the next ignition key cycle, a chime will sound and the TPM T elltale Light will turn ON. In addition, the EVIC will display a Low Pressure message and a graphic showing the low tire pressure value flashing.
5. Once you repair or replace the original road tire, and reinstall it on the vehicle in place of the compact spare, the TPMS will update automatically .
high speeds can cause damage and immediate service is requir ed. Poor quality gasoline can cause problems such as hard starting, stalling, and hesitations. If you experi- ence these symptoms, try another brand of gasoline before considering service for the vehicle.
Problems that result from using methanol/gasoline or E85 Ethanol blends are not the responsibility of the manufacturer . While MTBE is an oxygenate made fr om Methanol, it does not have the negative effects of Metha- nol. MMT In Gasoline MMT is a manganese containing metallic additive that is blended into some gasoline to increase octane.
• The use of leaded gas is prohibited by Federal law . Using leaded gasoline can impair engine performance, and damage the emission control system. • An out-of-tune engine, or certain fuel or ignition malfunctions, can cause the catalytic converter to overheat.
• Guard against carbon monoxide with proper mainte- nance. Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions repair ed promptly .
CAUTION! • Damage to the fuel system or emission control system could result from using an improper fuel tank filler tube cap (gas cap). • A poorly fitting gas cap could let impurities into the fuel system. • A poorly fitting gas cap may cause the Malfunc- tion Indicator Light to turn on.
NOTE: • T ighten the gas cap until you hear a “clicking” sound. This is an indication that the gas cap is tightened properly . The Malfunction Indicator Light in the in- strument cluster may turn on if the gas cap is not secured properly . Make sure that the gas cap is tight- ened each time the vehicle is refueled.
Gross V ehicle W eight Rating (GVWR) The GVWR is the total permissible weight of your vehicle including driver , passengers, vehicle, options, trailer tongue weight, and cargo. The label also specifies maxi- mum capacities of front and rear axle systems (GA WR).
Curb W eight The curb weight of a vehicle is defined as the total weight of the vehicle with all fluids, including vehicle fuel, at full capacity conditions, and with no occupants or cargo loaded into the vehicle.
TRAILER TOWING In this section, you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer , carefully review this information to tow your load as efficiently and safely as possible.
Gross Combination W eight Rating (GCWR) The Gross Combination W eight Rating (GCWR) is the total permissible weight of your vehicle and trailer when weighed in combination. (Note that GCWR ratings in- clude a 150 lbs (68 kg) allowance for the pr esence of a driver).
W eight-Carrying Hitch A weight-carrying hitch supports the trailer tongue weight, just as if it were luggage located at a hitch ball or some other connecting point of the vehicle. These kinds of hitches are the most popular on the market today and they’re commonly used to tow small- and medium-sized trailers.
W eight Distributing Hitch System Improper Adjustment of W eight Distributing System ST ARTING AND OPERA TING 367 5 I n f o r m a t i o n P r o v i d e d b y :.
T railer Hitch Classification Y our vehicle is capable of towing trailers up to 2,000 lbs (907 kg) without added equipment or alterations to the standard equipment. Y our vehicle may be factory equipped for safe towing of trailers weighing over 2,000 lbs (907 kg) with the optional T railer T ow Prep Package.
T railer T owing Weights (Maximum T railer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/T ransmission Model GCWR (Gross Com- bined Wt. Rating) Frontal Area Max. GTW (Gross T railer Wt.
When T owing T railers with Gross T railer W eight (GTW) between 3,500 Lbs (1 588 kg) and 5,000 Lbs (2 268 kg) The following chart pr ovides maximum trailer weight ratings towable for the following engine/transmission combinations, ONL Y if using a weight distributing hitch.
T railer and T ongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer . This places 10% to 15% of the Gross T railer W eight (GTW) on the tow hitch of your vehicle.
NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options, or dealer-installed options, must be consider ed as part of the total load on your vehicle.
• When hauling cargo, or towing a trailer , do not overload your vehicle or trailer . Overloading can cause a loss of control, poor performance, or damage to brakes, axle, engine, transmission, steering, suspen- sion, chassis structur e, or tires. • Safety chains must always be used between your vehicle and trailer .
− Proper tire inflation pressur es are essential to the safe and satisfactory operation of your vehicle. Refer to “T ires–General Information” in this section for infor - mation on tir e pressures and for proper tire inflation procedur es. − Also, check the trailer tires for proper tire inflation pressur es before trailer usage.
CAUTION! If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes, and they should be of adequate capacity . Failure to do this could lead to accelerated brake lining wear , higher brake pedal effort, and longer stopping distances.
The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector . Refer to the following illustrations.
T owing Tips Before setting out on a trip, practice turning, stopping, and backing the trailer in an area located away from heavy traffic. If using a manual transmission vehicle for trailer towing, all starts must be in FIRST gear to avoid excessive clutch slippage.
− Use speed contr ol in flat terrain and with light loads to maximize fuel efficiency . T owing T ips — Cooling System T o r educe potential for engine and transmission over- heating, take the following actions: − City Driving When stopped for short periods of time, put transmission in neutral and increase engine idle speed.
CAUTION! • The Automatic T ransmission must be in “P” (Park) position for recreational towing. The Manual T ransmission (if equipped) must be in gear (for example, 4th gear) for recreational towing. Failure to follow these procedures can cause severe trans- mission and/or transfer case damage.
3. T urn the ignition switch to the ON position. 4. Depress the brake pedal. 5. Shift the transmission to “N” (Neutral) (automatic transmission), or depress the clutch pedal (manual trans- mission). 6. Use the point of a ballpoint pen or similar object to depress the recessed transfer case Neutral (N) button for 4 seconds.
• The ignition switch must be in the ON position for a shift to take place and for the position indicator lights to be operable. If the ignition switch is not in the ON position, the shift will not take place and no position indicator lights will be on or flashing.
indicator light turns off (approximately 1 second). After the Neutral (N) button is released, the transfer case will shift to the position identified by the selector switch.
WHA T T O DO IN EMERGENCIES CONTENTS m If Y our Engine Overheats ................. 3 8 4 m Jacking And T ire Changing ................ 3 8 5 ▫ Jack Location ........................ 3 8 5 ▫ Spare T ire Stowage .................... 3 8 6 ▫ Spare T ire Removal .
IF YOUR ENGINE OVERHEA TS In any of the following situations, you can reduce the potential for overheating by taking the appropriate ac- tion. • On the highways — Slow down. • In city traffic — While stopped, put transmission in N (Neutral), but do not increase engine idle speed.
JACKING AND TIRE CHANGING W ARNING! • Getting under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. Y ou could be crushed. Never get any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift.
Spare Tire Stowage The spare tir e is stowed underneath the rear of the vehicle and is held in place by a cable winch mechanism. Spare Tire Removal Fit the jack handle extension over the drive nut.
CAUTION! The winch mechanism is designed for use with the jack extension tube only . Use of an air wrench or other power tools is not recommended and they can damage the winch. When the spare is clear , tilt the retainer at the end of the cable, and pull it through the center of the wheel.
Jacking Instructions 1. Remove spare tire. 2. Loosen (but do not remove) the wheel lug nuts by turning them to the left one turn while the wheel is still on the ground. 3. Remove jack and tools from mounting bracket. As- semble the tools by connecting the driver to the exten- sion, and then to the lug wrench.
5. Raise the vehicle by turning the jack scr ew to the right. Raise the vehicle only until the tire just clears the surface and enough clearance is obtained to install the spare tire. Minimum tire lift provides maximum stability . W ARNING! Raising the vehicle higher than necessary can make the vehicle less stable and cause an accident.
nuts until each nut has been tightened twice. Correct wheel nut tightness is 130 N·m (95 ft. lbs). If in doubt about the correct tightness, have them checked with a torque wrench by your authorized dealer or at a service station. 10. Lower the jack to it’s fully closed position.
1. W ear eye protection and r emove all metal jewelry such as watchbands or bracelets that might make an unin- tended electrical contact. 2. When boosting from a battery in another vehicle, park that vehicle within booster cable reach, but without allowing the vehicles to touch.
W ARNING! • Y ou should not try to start your vehicle by pushing or towing. • Do not connect the cable to the negative post of the discharge battery . The resulting electrical spark could cause the battery to explode. • During cold weather when temperatures are be- low freezing point, electrolyte in a discharged battery may freeze.
W ARNING! Any procedure other than above could result in: 1. Personal injury caused by electrolyte squirting out the battery vent; 2. Personal injury or property damage due to battery explosion; 3. Damage to charging system of booster vehicle or of immobilized vehicle.
TOWING METHOD NOTE: The transmission & transfer case must be in “N” Neutral under any towing configuration. Model Flat T owing (all four wheels on the ground) Flat Bed T owing (Recommended for.
MAINT AINING YOUR VEHICLE CONTENTS m 3.7L Engine Compartment ................ 3 9 8 m Onboard Diagnostic System — OBD II ........ 3 9 9 ▫ Loose Fuel Filler Cap Message ............ 4 0 0 m Emissions Inspection And Maintenance Programs ............
▫ A/C Air Filter — If Equipped ............ 4 1 2 ▫ Power Steering — Fluid Check ............ 4 1 2 ▫ Driveline And Steering Component Lubrication .......................... 4 1 3 ▫ Body Lubrication ..................... 4 1 3 ▫ W indshield W iper Blades .
m Replacement Light Bulbs ................. 4 4 3 m Bulb Replacement ...................... 4 4 3 ▫ Headlight ........................... 4 4 3 ▫ Front T urn Signal And Front Side Marker Lights ............................. 4 4 4 ▫ Front Fog Light .
3.7L ENGINE COMP ARTMENT 398 MAINT AINING YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :.
ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission contr ol systems.
Loose Fuel Filler Cap Message If the vehicle diagnostic system determines that the fuel filler cap in loose, improperly installed, or damaged, a “gASCAP” message will display in the instrument clus- ter . T ighten the gas cap until a “clicking” sound is heard.
2. T urn the ignition to the ON position, but do not crank or start the engine. 3. If you crank or start the engine, you will have to start this test over . 4. As soon as you turn your key to the ON position, you will see your MIL symbol come on as part of a normal bulb check.
REPLACEMENT P ARTS Use of genuine Mopar t parts for normal/scheduled maintenance and repairs is highly recommended to in- sure the designed performance. Damage or failures caused by the use of non-Mopar t parts for maintenance and repairs will not be covered by the manufacturer’s warranty .
These items should be inspected if a malfunction is observed or suspected. Engine Oil Checking Oil Level T o assure proper engine lubrication, the engine oil must be maintained at the correct level.
Change Engine Oil The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to “Maintenance Schedule” in Section 8 of this manual for information on this system.
Lubricants, which do not have both, the engine oil certification mark and the corr ect SAE viscosity grade number should not be used. Synthetic Engine Oils Y ou may use synthetic engine oils pr ovided the r ecom- mended oil quality requir ements are met, and the recom- mended maintenance intervals for oil and filter changes are followed.
Drive Belts — Check Condition and T ension Belt tension is contr olled by means of an automatic tensioner . Therefore, no belt tension adjustments are requir ed. However , belt and belt tensioner condition should be inspected periodically and r eplaced if re- quired.
W ARNING! The air induction system (air cleaner , hoses, etc) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner , hoses, etc) unless such removal is necessary for repair or maintenance.
CAUTION! Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition. In the event of engine malfunction, particularly involv- ing engine misfire or other apparent loss of perfor - mance, have your vehicle serviced promptly .
T o minimize the possibility of catalytic converter dam- age: • Do not shut off the engine or interrupt the ignition when the transmission is in gear and the vehicle is in motion. • Do not try to start the engine by pushing or towing the vehicle. • Do not idle the engine with any ignition coil connec- tors disconnected for prolonged periods.
W ARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Don’t allow battery fluid to contact your eyes, skin, or clothing. Don’t lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area imme- diately with large amounts of water .
Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an Authorized Dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test.
Refrigerant Recovery and Recycling R-134a Air Conditioning Refrigerant is a hydrofluor ocar- bon (HFC) that is endorsed by the Environmental Pro- tection Agency and is an ozone-saving product.
If necessary , add fluid to restore to the proper indicated level. W ith a clean cloth, wipe any spilled fluid from all surfaces. Refer to “Fluids, Lubricants, and Genuine Parts” in this section for the correct fluid type. NOTE: Upon initial start-up in cold weather , the power steering pump may make noise for a short period of time.
Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid when using the wipers to r emove salt or dirt from a dry windshield. A void using the wiper blades to remove frost or ice from the windshield.
W ARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. Exhaust System The best protection against carbon monoxide entry into the vehicle body is a pr operly maintained engine exhaust system.
Cooling System W ARNING! • When working near the radiator cooling fan, dis- connect the fan motor lead or turn the ignition switch to the LOCK position. The fan is tempera- ture controlled and can start at any time the ignition switch is in the ON position.
properly , the coolant will begin to drain from the coolant recovery bottle. DO NOT REMOVE THE COOLANT PRESSURE CAP WHEN THE COOLING SYSTEM IS HOT . Cooling System — Drain, Flush, and Refill The system should be drained, flushed, and r efilled at the intervals shown in the “Maintenance Schedule” in Sec- tion 8 of this manual.
Adding Coolant Y our vehicle has been built with an improved engine coolant that allows extended maintenance intervals. This coolant can be used up to 5 Y ears or 100,000 miles (160 000 km) before replacement. T o prevent r educing this extended maintenance period, it is important that you use the same coolant throughout the life of your vehicle.
The cap should be inspected and cleaned if there is any accumulation of foreign material on the sealing surfaces. W ARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety pre- caution. Never add coolant when the engine is overheated.
service attendant of this. As long as the engine operating temperature is satisfactory , the coolant bottle need only be checked once a month. When additional coolant is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill.
• Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the condenser clean, also. • Do not change the thermostat for summer or winter operation. If r eplacement is ever necessary , install ONL Y the correct type thermostat.
Brake System In order to assure brake system performance, all brake system components should be inspected periodically . Suggested service intervals can be found in the “Mainte- nance Schedule” in Section 8 of this manual. W ARNING! Riding the brakes can lead to brake failure and possibly an accident.
• Inspect the brake hoses whenever the brake system is serviced and at every engine oil change. Inspect hy- draulic brake hoses for surface cracking, scuf fing, or worn spots.
W ARNING! • Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire. • Use of a brake fluid that has a lower initial boiling .
Automatic T ransmission Fluid Level Check Y our vehicle is equipped with a capped dipstick tube that is sealed and it should not be tampered with. Y our authorized dealer has the pr oper tools to ensur e that the fluid level is set properly .
Manual T ransmission — If Equipped Fluid Level Check Check the fluid level by removing the fill plug. The fluid level should be between the bottom of the fill hole and a point not more than 3/16” (4.76 mm) below the bottom of the hole. Add fluid, if necessary , to maintain the proper level.
Adding Fluid Fluid should be added only at filler hole until fluid begins to run out of the hole. Draining Fluid First remove fill plug (2), then drain plug (3). Recom- mended tightening torque for drain and fill plugs is 15–25 ft.lbs. (20–34 N·m).
NOTE: Be sure to follow the “police, taxi, fleet, of f-road, or frequent trailer towing” maintenance interval if appli- cable. Front/Rear Axle Fluid Fluid Level Check The lubricant level should be at bottom edge of the oil fill hole. Adding Fluid Add lubricant only at the fill hole and only to the level specified above.
hot or cold weather and other extreme conditions will have an adverse effect on paint, metal trim, and under- body protection. The following maintenance recommendations will enable you to obtain maximum benefit from the corrosion resistance built into your vehicle.
CAUTION! • Do not use abrasive or strong cleaning materials such as steel wool or scouring powder , which will scratch metal and painted surfaces. • Use of power washers exceeding 1,200 psi (8 274 kPa) can result in damage or removal of paint and decals.
Wheel and Wheel T rim Care All wheels and wheel trim, especially aluminum and chrome plated wheels should be cleaned r egularly with a mild soap and water to prevent corrosion. T o remove heavy soil and/or excessive brake dust, use Mopar t Wheel Cleaner (05066247AB) or equivalent or select a nonabrasive, non-acidic cleaner .
use polishes, oils, cleaning fluids, solvents, detergents, or ammonia-based cleaners to clean leather upholstery . Ap- plication of a leather conditioner is not required to maintain the original condition. W ARNING! Do not use volatile solvents for cleaning purposes.
T o minimize the possibility of scratching the lenses and reducing light output, avoid wiping with a dry cloth. T o remove road dirt, wash with a mild soap solution fol- lowed by rinsing. Do not use abrasive cleaning components, solvents, steel wool or other aggressive material to clean the lenses.
Replace the belts if they appear frayed or worn or if the buckles do not work properly . SKY SLIDER T TOP CARE Immediate r emoval of any contaminant is r ecommended. Regular washing of the top will enhance its life and appearance, and make successive cleaning easier .
• Allow the top to dry before opening. V acuuming the top with a wet/dry shop vacuum will decrease the top’s drying time, ensure removal of all dirt, and delete streaks in the material. • Multiple cleanings may be necessary to remove stub- born stains.
CAUTION! A void getting Scotchguard t on the surrounding weather strips, moldings, paint, or glass. Damage to these items might occur . Weather Strip Care Lubricate the weather strips periodically with Mopar W eather Strip Lubricant (part number 4773427), to keep them soft and pliable.
Cavity Cartridge Fuse Mini Fuse Description J3 40 Amp Green — Rear Door Modules J4 25 Amp White — Driver Door Node J5 25 Amp White — Passenger Door Node J6 40 Amp Green — Anti-Lock Brake Sys- .
Cavity Cartridge Fuse Mini Fuse Description J21 20 Amp Blue — Front W asher/Rear W asher - if equipped J22 25 Amp White — Sunroof Module - if equipped M1 — 15 Amp Blue Stop Light Switch Feed —.
Cavity Cartridge Fuse Mini Fuse Description M1 1 — 10 Amp Red Automatic T empera- ture Control (A TC) - if equipped M12 — 30 Amp Green Radio/Amplifier - if equipped M13 — 20 Amp Y ellow Cabin Co.
Cavity Cartridge Fuse Mini Fuse Description M17 — 15 Amp Blue Exterior Lighting — Left Front Park & Side Marker , Left T ail & Running, License Lights M18 — 15 Amp Blue Exterior Lighting.
Cavity Cartridge Fuse Mini Fuse Description M26 — 10 Amp Red Power Mirror Switch/ Driver W indow Switch M27 — 10 Amp Red Ignition Switch/ W ireless Control Module (WCM)/ Steering Column Lock - if .
Cavity Cartridge Fuse Mini Fuse Description M37 — 10 Amp Red Anti-Lock Brake Sys- tem (ABS)/Electronic Stability Program (ESP) Module/Stop Light Switch M38 — 25 Amp Natural Door & Liftgate Loc.
REPLACEMENT LIGHT BULBS LIGHT BULBS — Interior Bulb No. Cargo Light ........................ WL212–2 Overhead Console Light .............. P L W214–2A Reading Light ....................... WL212–2 LIGHT BULBS — Exterior Bulb No. Headlight ..
CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. 6. Install the bulb and connector assembly into the headlight housing and rotate the lock ring clockwise to lock it in place.
Front Fog Light 1. Open the hood. 2. Reach behind the headlight housing to access the bulb. 3. Rotate the bulb’s socket counterclockwise, and r emove the bulb and socket assembly from the fog light housing. 4. Pull the bulb out of the socket and insert the replace- ment bulb.
5. Remove the two screws that fasten the back plate to the taillight housing. 6. Separate the back plate from the taillight housing. 7. Pull the appropriate bulb(s) out of the back plate and insert the replacement bulb(s). 8. Install the back plate and screws into the taillight housing.
FLUID CAP ACITIES U.S. Metric Fuel (approximate) 3.7 Liter Engine 19.5 Gallons 73.8 Liters Engine Oil-W ith Filter SAE 5W -20, API Certified 5 Qts 4.7 Liters Cooling System * Mopar t Antifreeze/Coolant 5 Y ear/100,000 Mile Formula or equivalent. 14 Qts 13 Liters * Includes heater and coolant recovery bottle filled to MAX level.
FLUIDS, LUBRICANTS, AND GENUINE P ARTS Engine Component Fluids, Lubricants, and Genuine Parts Engine Coolant Mopar t Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Or- ganic Additive T echnology) or equivalent. Engine Oil Use API Certified SAE 5W -20 Engine Oil meeting the requirements of DaimlerChrysler Material Standard MS-6395.
Chassis Component Fluids, Lubricants, and Genuine Parts Automatic T ransmission Mopar t A TF+4, Automatic T ransmission Fluid. Manual T ransmission Mopar t Manual T ransmission Lubricant or equivalent (meeting the re- quirements of DaimlerChrysler Material Standard MS-9224) T ransfer Case Mopar t A TF+4, Automatic T ransmission Fluid.
I n f o r m a t i o n P r o v i d e d b y :.
MAINTENANCE SCHEDULES CONTENTS m Emission Control System Maintenance ........ 4 5 2 m Maintenance Schedule ................... 4 5 2 ▫ Required Maintenance Intervals .
EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued proper functioning of the emission control system.
NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicles oil if it has been 6 months since your last oil change even if the oil change indicator message is NOT illumi- nated. • Change your engine oil more often if you drive your vehicle off-r oad for an extended period of time.
Once a Month • Check tire pressur e and look for unusual wear or damage. • Inspect the battery and clean and tighten the terminals as requir ed. • Check the fluid levels of coolant reservoir , brake master cylinder , and power steering, and add as needed.
Required Maintenance Intervals Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Change the engine oil and engine oil filter . 6,000 10 000 6 Rotate the tires.
Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Inspect the front suspension, tie rod ends and boot seals, and replace if necessary . 24,000 40 000 24 Replace the engine air cleaner filter .
Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Change the transfer case fluid if using your vehicle for any of the following: police, taxi, fleet, off-r oad, or fre- quent trailer towing.
W ARNING! Y ou can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic.
IF YOU NEED CONSUMER ASSIST ANCE CONTENTS m Suggestions For Obtaining Service For Y our V ehicle .............................. 4 6 0 ▫ Prepare For The Appointment ............ 4 6 0 ▫ Prepare A List ........................ 4 6 0 ▫ Be Reasonable W ith Requests .
SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty , discuss additional charges with the service manager .
technicians, special tools, and the latest information to assure your vehicle is fixed corr ectly and in a timely manner . This is why you should always talk to your dealer’s service manager first.
Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its Customer Center .
W ARNING! Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
T o contact NHTSA, you may either call the Auto Safety Hotline toll free at 1–888–327–4236 (TTY : 1–800–424– 9153), or go to http://www .safercar .gov; or write to: Administra- tor , NHTSA, 400 Seventh Str eet, SW ., W ashington, DC 20590.
• Diagnostic Procedure Manuals. Filled with diagrams, charts and detailed illustrations, these practical manuals make it easy for students and technicians to find and fix problems on computer- controlled vehicle systems and featur es.
DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following describes the tire grading categories estab- lished by the National highway T raffic Safety Adminis- tration. The specific grade rating assigned by the tire’s manufacturer in each category is shown on the sidewall of the tires on your car .
T emperature Grades The temperature grades are A (the highest), B, and C, repr esenting the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel.
I n f o r m a t i o n P r o v i d e d b y :.
INDEX 10 I n f o r m a t i o n P r o v i d e d b y :.
About Y our Brakes ....................... 3 0 8 ABS (Anti-Lock Brake System) ......... 195,310,315 Adding Engine Coolant (Antifreeze) .......... 4 1 8 Adding Fuel ........................... 3 5 9 Adding Rear W asher Fluid ................. 1 8 1 Adding W asher Fluid .
Auto Unlock, Doors ....................... 3 2 Automatic Dimming Mirror ................. 8 8 Automatic Door Locks ................... 31,32 Automatic Headlights .................... 1 3 4 Automatic Oil Change Indicator .......... 201,209 Automatic T emperature Contr ol (A TC) .
Brake, Parking .......................... 3 0 8 Brake System ........................... 4 2 2 Anti-Lock (ABS) .................... 310,315 Fluid Check ....................... 423,449 Hoses .............................. 4 2 2 Master Cylinder ........
Chart, T ire Sizing ........................ 3 3 0 Check Engine Light (Malfunction Indicator Light) ................................ 4 0 0 Checking Y our V ehicle For Safety ............. 7 9 Checks, Safety ........................... 7 9 Child Restraint .
T emperature Gauge ..................... 1 9 8 Corrosion Protection ..................... 4 2 8 Crankcase Emission Control System .......... 4 0 9 Cruise Light ........................... 2 0 2 Cup Holder ............................ 1 7 2 Customer Assistance .
Electrical Power Outlets ................... 1 6 9 Electronic Brake Control System ............. 3 1 4 Anti-Lock Brake System ................. 3 1 5 Brake Assist System .................... 3 1 6 Electronic Roll Mitigation ................ 3 1 7 Electronic Stability Program .
Overheating .......................... 3 8 4 Starting ............................. 2 7 7 T emperature Gauge ..................... 1 9 8 Engine Oil V iscosity ...................... 4 0 4 Engine Oil V iscosity Chart ................. 4 0 4 Enhanced Accident Response Feature .
Power Steering ........................ 4 1 2 Fluids, Lubricants and Genuine Parts .......... 4 4 8 Fog Light Service ........................ 4 4 5 Fog Lights .................... 133,136,194,445 Folding Rear Seat ........................ 1 2 4 Four Wheel Drive Shifting .
Gauges Coolant T emperature .................... 1 9 8 Fuel ................................ 1 9 0 Odometer ........................... 2 0 0 Speedometer ......................... 1 9 4 T achometer .......................... 1 9 5 Gear Ranges ........
High Beam/Low Beam Select (Dimmer) Switch . . 137 Hill Descent Control ..................... 3 2 2 Hill Descent Control Indicator ............ 196,322 Hill Start Assist ......................... 3 1 9 Hitches T railer T owing ........................ 3 6 8 Holder , Coin .
Jump Starting .......................... 3 9 0 Key , Programming ........................ 1 6 Key , Replacement ........................ 1 6 Key , Sentry (Immobilizer) ................... 1 4 Key-In Reminder ......................... 1 4 Keyless Entry System .
Exterior .............................. 8 2 F o g .......................... 136,194,445 Four-Wheel Drive Indicator .... 196,197,200,295,301 Headlight Switch ...................... 1 3 3 Headlights ........................ 133,443 Headlights On Reminder .
Loading V ehicle ......................... 3 6 1 T i r e s ............................... 3 3 3 Locks ................................. 2 9 Auto Unlock .......................... 3 2 Automatic Door ........................ 3 1 Child Protection ......
Electric Remote ........................ 9 0 Exterior Folding ........................ 9 0 Heated .............................. 9 1 Outside .............................. 8 9 Rearview ............................. 8 8 V anity ........................
Oil Filter , Change ........................ 4 0 5 Onboard Diagnostic System .............. 399,400 Opener , Garage Door (HomeLink t ) ........... 1 5 5 Operating Precautions .................... 3 9 9 Outside Rearview Mirrors .................. 8 9 Overdrive .
Power Steering Fluid .................. 412,449 Pregnant W omen and Seat Belts .............. 5 0 Preparation for Jacking .................... 3 8 7 Pretensioners Seat Belts ............................. 4 7 Programmable Electronic Features ..........
Remote Keyless Entry (RKE) ................. 2 0 Remote Sound System (Radio) Controls ........ 2 5 8 Remote Starting System .................... 2 7 Replacement Bulbs ....................... 4 4 3 Replacement Keys ........................ 1 6 Replacement Parts .
Reminder ............................ 2 0 2 Shoulder Belt Anchorage .................. 4 6 Untwisting Procedur e .................... 4 7 Seats ................................. 1 1 8 Adjustment .......................... 1 1 8 Cleaning ..............
Side V iew Mirror Adjustment ................ 8 9 Side W indow Demisters (Defrosters) .......... 2 7 1 Signals, T urn ................. 82,136,194,444,445 Sky Slider Power Roof ................. 164,434 Snow Chains (T ire Chains) ................. 3 4 4 Sound Systems (Radio) .
Sway Control, T railer ..................... 3 1 8 Synthetic Engine Oil ...................... 4 0 5 System, Navigation ...................... 2 3 7 System, Remote Starting .................... 2 7 T achometer ............................ 1 9 5 T emperature Contr ol, Automatic (A TC) .
T read W ear Indicators ................... 3 4 1 T o Open Hood .......................... 1 3 1 T ongue W eight/T railer W eight .............. 3 7 1 T orque Converter Clutch .................. 2 8 7 T ow/Haul ............................. 2 8 6 T ow/Haul Indicator Light .
T ransmitter Programming (Remote Keyless Entry) ................................. 2 0 T ransmitter , Remote Keyless Entry (RKE) ........ 2 0 T read W ear Indicators .................... 3 4 1 T rip Odometer .......................... 2 0 0 T rip Odometer Reset Button .
Wheel Alignment and Balance ............... 3 4 3 Wheel and Wheel T rim .................... 4 3 1 Wheel and Wheel T rim Care ................ 4 3 1 Wheel Mounting ........................ 3 8 9 W ind Buffeting ..................... 39,163,168 W indow Fogging .
INTRODUCTION INTRODUCTION ROLLOVER WARNING HOW TO USE THIS MANUAL WARNINGS AND CAUTIONS VEHICLE IDENTIFICATION NUMBER VEHICLE MODIFICATIONS / ALTERATIONS THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A .
Ein wichtiger Punkt beim Kauf des Geräts Jeep liberty (2008) (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Jeep liberty (2008) noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Jeep liberty (2008) - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Jeep liberty (2008) reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Jeep liberty (2008) erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Jeep liberty (2008) besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Jeep liberty (2008) verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Jeep liberty (2008). Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Jeep liberty (2008) gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
