Benutzeranleitung / Produktwartung JFT des Produzenten Jackson
Zur Seite of 38
TECHNICAL MANUAL FOR JACKSON MODEL: JFT JFT -S JACKSON MSC LLC. P .O. BOX 1060 BARBOURVILLE, KY . 40906 PHONE: 1-606-523-9795 F AX: 1-606-523-9196 www .
ALL NEW JACKSON DISHW ASHERS ARE W ARRANTED TO THE ORIGINAL PURCHASER TO BE FREE FROM DEFECTS IN MA TERIAL OR WORKMANSHIP , UNDER NORMAL USE AND OPERA TION FOR A PERIOD OF (1) ONE YEAR FROM THE DA TE OF PURCHASE, BUT IN NO EVENT TO EXCEED (18) EIGHTEEN MONTHS FROM THE DA TE OF SHIPMENT FROM THE F ACTORY .
3 ST OP! PA R E ! ARRET! CALL 1-88 8-800-5672 TO REGISTER THIS PRODUCT! F AILURE TO DO SO WILL VOID THE W A RRANTY! LL AM E AL 1-888-800- 5672 P AR A REGISTRAR ESTE P RODUCTO! AL NO HACERL O L A GARANTIA SERA ANUL ADA! S.
i REVISION/ P AGE REVISION DA TE MADE BY APPLICABLE ECN DET AILS C 04-30-04 CBW N/A Updated to new format; Added missing parts to steam booster assembly . D 12-16-04 MA W 7144, 7143 7145, 7156 Added new tall door assembly p arts. Added stop brackets to unloader stop assembly .
ii NOMENCLA TURE FOR THE MODELS COVERED IN THIS MANUAL JFT -S JFT - Electrically-heated rackless conveyor dishmachine JFT -S - S team-heated rackless conveyor dishmachine Model: Serial No.: Inst allation Date: Service Rep. Name: Phone No.: Jackson MSC LLC provides technical support for all of the dishmachines detailed in this manual.
T ABLE OF CONTENTS iii SECTION DESCRIPTION P AGE I. SPECIFICA TION INFORMA TION Performance/Capabilities of the JFT 2 Electrical Requirements of the JFT 3 Performance/Capabilities of the JFT -S 4 Elec.
T ABLE OF CONTENTS iv SECTION DESCRIPTION P AGE VI. P ARTS SECTION Final Rinse Arm Assembly 55 3/4” V acuum Breaker Repair Part s Kit/Air Gap Assemblies 56 Electrical Section Assembly 57 Electrical .
1 SECTION 1: SPECIFICA TION INFORMA TION.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: 09-14-2007 SECTION 1: SPECIFICA TION INFORMA TION 2 OPERA TING CAP ACITY (RACKS/HOUR) DISHES OR GLASSES PER HOUR (8.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: 09-14-2007 SECTION 1: SPECIFICA TION INFORMA TION 3 CONTROLS, MOTORS, & BLOWER DR YER SECTION RINSE TYPICAL HEA TER TOT AL E.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: 09-14-2007 SECTION 1: SPECIFICA TION INFORMA TION 4 PERFORMANCE/CAP ABILITIES OF THE JFT -S OPERA TING CAP ACITY (RACKS/HOUR) DISHES OR GLASSES PER HOUR (8.6 FPM) 17,101 DISHES OR GLASSES PER HOUR (6.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: 09-14-2007 SECTION 1: SPECIFICA TION INFORMA TION 5 W ASH/PREW ASH PUMP MOT OR (2) 3 HP POWER RINSE PUMP MOT OR (1) 2 HP FINAL RINSE PUMP MOTOR (1) 1/2 HP DRIVE MOTOR (1) 1/4 HP EXHAUST F AN MOTOR (1) 0.
Legend 1 - 1-1/2" NPT Machine Drain Connection (Floor drain - optional to either end) 2 - *Wash Tank Electrical Connection 3 - *Rinse Tank Electrical Connection 4 - *Booster Heater Electrical Con.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: 09-14-2007 SECTION 1: SPECIFICA TION INFORMA TION 7 3" [7 6mm] Minimum Floor Si nk or Floor Drain (Opti onal to drain at load or unload end of the m achine.
Contr ol Cabinet Door Open 7 6 4 5 2 3 1 3" [72mm] Minimum Floor Si nk or Floor Drai n (Opti onal to dr ain at load or unload end of the machi ne.
Legend 1 - 1- 1/2" N PT Mach ine D rain Connection (Floor drain - optional to either end) 2 - Electrical Connection - See Ta ble fo r Am p Dra w 3 - 3/ 4" NPT I ncom ing Wa ter Connection 4 .
Control Cabinet D oor Open 3" [72mm] Minimum Floor S ink or Floor Dr ain (Optional to drain at load or unload end of the machine.) PREWASH SECTION WASH SECTION POWER RINSE SECTION CONTROL CABINET.
Control C abinet Door Open 3 8 4 1 3" [72mm] Minimum Floor Si nk or Floor Drain (Optional t o drain at load or unload end of the machine.) Door In The Open Position 1 PREWASH SECTIO N WASH SECTIO.
12 SECTION 2: INST ALLA TION/OPERA TION INSTRUCTIONS.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: N/A 13 SECTION 2: INST ALLA TION/OPERA TION INSTRUCTIONS INST ALLING THE JFT DISHMACHINE NOTE: All JFT models are accompanied by a certified Jackson technician for the initial inst allation.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: N/A 14 SECTION 2: INST ALLA TION/OPERA TION INSTRUCTIONS INST ALLING THE JFT DISHMACHINE (CONTINUED) CONNECTING THE DRAIN LINE: The drains for the models covered in this manu- al are gravity discharge drains.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: N/A 15 SECTION 2: INST ALLA TION/OPERA TION INSTRUCTIONS INST ALLING THE JFT DISHMACHINE (CONTINUED) STEAM TRAP CONNECTIONS: There are steam traps provided on the discharge side of all steam heating devices.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: N/A 16 SECTION 2: INST ALLA TION/OPERA TION INSTRUCTIONS INST ALLING THE JFT DISHMACHINE (CONTINUED) gram to see the order in which the provided washers, wheels, locknuts, and plate connectors are arranged for proper operation.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: N/A 17 SECTION 2: INST ALLA TION/OPERA TION INSTRUCTIONS DELIMING OPERA TIONS DELIMING OPERA TIONS: In order to maintain the dishmachine at it s optimum performance level, it will be required to remove lime and corrosion deposits on a frequent basis.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: N/A 18 SECTION 2: INST ALLA TION/OPERA TION INSTRUCTIONS DETERGENT CONTROL Detergent usage and water hardness are two factors that contribute greatly to how efficiently your dishmachine will operate.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: N/A 19 SECTION 2: INST ALLA TION/OPERA TION INSTRUCTIONS OPERA TING INSTRUCTIONS Before the first st art up of the machine, check that all tools, cleaning rags, and all foreign part s are removed from the operation areas of the machine.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: N/A 20 SECTION 2: INST ALLA TION/OPERA TION INSTRUCTIONS OPERA TING INSTRUCTIONS (CONTINUED) DAIL Y MACHINE PREP ARA TION: Refer to the section entitled “PREP ARA TION” at the top of this page and follow the instruc- tions there.
21 SECTION 3: PREVENT A TIVE MAINTENANCE.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: N/A SECTION 3: PREVENT A TIVE MAINTENANCE 22 PRE-SCRAPPING/STRAINERS Preventative maintenance should only be performed by authorized service personnel. If you have questions about who is authorized then please contact Jackson T echnical Service.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: N/A SECTION 3: PREVENT A TIVE MAINTENANCE 23 DAIL Y/WEEKL Y/MONTHL Y MAINTENANCE Daily: 1. Drain and clean the dishmachine as per the cleaning instructions supplied with this manual.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: N/A SECTION 3: PREVENT A TIVE MAINTENANCE 24 MONTHL Y (CONTINUED)/QUARTERL Y/ANNUAL MAINTENANCE found. Correct any deficiencies before returning the unit to an operating status. 5.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: N/A SECTION 3: PREVENT A TIVE MAINTENANCE 25 ITEMS NOT REQUIRING MAINTENANCE Items that should not require maintenance: 1. Thermost ats - the thermostat s for your JFT machine are factory set so that your machine will operate in accordance with accepted regulatory parameters.
26 SECTION 4: TROUBLESHOOTING SECTION.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: N/A 27 W ARNING: Inspection, testing and repair of electrical equipment should be performed only by qualified service per- sonnel. Certain procedures in this section require electrical test s or measurements while power is applied to the machine.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: N/A 28 SECTION 4: TROUBLESHOOTING SECTION COMMON PROBLEMS W ARNING: Inspection, testing and repair of electrical equipment should be performed only by qualified service per- sonnel.
29 SECTION 5: SER VICE PROCEDURES.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: N/A 30 SECTION 5: SERVICE PROCEDURES V ACUUM BREAKER REP AIR P ARTS KIT These dishmachines are equipped with vacuum breakers to serve as back-flow prevention devices. ASSE requirements specify what type of back-flow prevention is nec- essary on dishmachines.
JFT Series T echnical Manual 7610-002-77-38 Issued: 03-16-2006 Revised: N/A 31 SECTION 5: SERVICE PROCEDURES V ACUUM BREAKER REP AIR P ARTS KIT (CONTINUED) 6. Y our repair kit comes with a new plunger . Examine the old one and ensure that the mating surface is not damaged or cut.
Ein wichtiger Punkt beim Kauf des Geräts Jackson JFT (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Jackson JFT noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Jackson JFT - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Jackson JFT reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Jackson JFT erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Jackson JFT besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Jackson JFT verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Jackson JFT. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Jackson JFT gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
