Benutzeranleitung / Produktwartung GHE135U des Produzenten IOGear
Zur Seite of 36
ION™ Drive 3.5” Hi-Speed USB 2.0 Har dDrive ( GHE135U Installation Manual).
Thank you f or purchasing IOGEAR’ s® ION™ Drive , one of the fastest Hi-Speed USB 2.0 HardDriv es on the market. IOGEAR® only manuf actures high quality storage devices so we are sure y ou will be satisfied with your purchase. IOGEAR® is dedicated to customer service and satisfaction, and wishes y ou the best with y our new ION™ Dr iv e.
T able of Contents P ackage Contents Overview Features Requirements Introduction Installation (Hard Drive, ION Driv e Software) Connecting ION Drive to Y our Computer Device Remo val Driver Remov a l .
2 P ack age Contents This package contains: 1 ION™ Drive 1 Hi-Speed USB 2.0 T ype A to B Cable (6 f eet) 1 IOGEAR Installation CD 1 P ower Adapter 1 User Manual 1 W arranty Card If any of the items are missing or damaged please contact your dealer immediately .
3 Overview Overview The ION™ Drive is yet another innov ative Hi-Speed USB 2.0 solution dev eloped by IOGEAR®. The ION™ Dr ive offers a complete high speed stor age solution at the fraction of the cost of other external HardDrives. Setup is fast and easy , simply plug in the drive , install the software, and you’ re ready to go .
4 Features Features - 40 Times F aster Than The Original USB - Suppor ts High Speed Data T ransf er Rates of up to 480 Mbps - Suppor ts Windows® 98, 98SE, 2000, ME, XP - Fully Backward Compatib le With USB 1.
5 For PC Users - PC compatible 200 MHz or g reater - PC running Windo ws® 98SE, 2000, ME, XP - Minimum 64MB RAM - CD-ROM drive - A vailable Hi-Speed USB 2.0 P ort For Mac Users* - Mac OS X or Later - A vailab le Hi-speed USB 2.0 P or t - CD-ROM drive * Base Upon the A vailability of the Mac Driv er Accessories / additional Products Hi-Speed USB 2.
6 Introduction Introduction of the ION™ Drive’ s Underlying T ec hnology Hi-Speed USB 2.0 is the backbone of our ION™ Drive . USB 2.0 is the next gener ation of USB connectivity , providing additional bandwidth thus broadening the range of peripherals that ma y be attached to your computers.
7 Intr oduction This manual contains inf or mation on the installation and capabilities of your ne w ION™ drive. In sections of the manual where sequential steps are listed, each action is listed with no indentation. Additional te xt is included, but indented, to fur ther explain each of these actions .
8 1 2 Pictorial Introduction Front Vie w 1. P ower Light 2. On/Off Switch.
9 1 2 Pictorial Introduction Back View 1. Hi-Speed USB 2.0 Mini-B por t 2 . Po w e r Po r t.
10 Installation of Hard Drive Step. 1 Please ha ve the following read y 1 Phillip screw driver (not included in the pac kage) Remov e Phillips screw from bottom edge of side panel. Step. 2 Remo ve Base Note: F or the best performance f or the USB 2.0 device , please use the cerified USB 2.
11 Installation of Hard Drive Step. 3 Remov e side panel in a backward direction. Step. 4 Remov e two screws in hard driv e retention bracket..
12 Installation of Hard Drive Step. 5 Remov e hard dr ive retention br acket from enclosure . Slide in an upward direction to wards the top of the enclosure to free the dri v e bracke t.
13 1 2 3 4 7 6 5 8 Installation of Hard Drive Step. 6 Inspect all the components again: 1. Enclosure with one side panel attached 2. Side panel 3. Drive br acket 4. One small screw 5. T wo long screws with nylon collar 6. A C adapter 7. A C adapter cord 8.
14 Installation of Hard Drive Step. 7 Attach the hard drive into the hard driv e brack et. Screw the f our screws into the drive brac ket that were provided with the hard drive. Mak e sure you take all the necesssary steps to avoid ESD (electric static discharge).
15 Installation of Hard Drive Step. 8 Attach the signal cable to the hard drive connector of the hard drive with brack et attached. Attach the power cable to the hard drive in the po were sock et. Attach the brac ket with drive attached into the enclosure and seat ov er the base plate.
16 Installation of Hard Drive Step. 9 Inser t two screws through br acket and tighten down br acket to base plate..
17 Installation of Hard Drive Step. 10 Place side cov er on enclosure and secure by sliding in f orward direction. Replace screw in side panel in bottom edge.
18 Inser t the IOGEAR Installation CD into your computer’ s CDR OM tr ay (It is not necessary to install this driver under Window 2000, ME, and XP). Installation of ION Drive Software Select “ION” in My Computer. Double clic k “ION” driver .
19 Step. 4 Click “Ne xt” on Installation Wizard screen. (Contin ued) Step. 5 W e recommend to choose “Complete” when prompted how to install. Step. 6 After the installation, you will be ab le to find the hard drive in My Computer after y ou turn on the pow er of ION.
20 1 2 Note: Bef ore you begin, please make sure that the power to the de vice and your computer has been turned off. Step 1. Plug the Hi-Speed USB 2.0 cable with T ype A connector into the back of the ION™ Driv e Step 2.
21 1 Step 3. Plug the Hi-Speed USB 2.0 Cable (T ype A Connector) into the Hi-Speed USB 2.0 Port (T ype A Slot) located on the back of y our computer in the PCI Card Ba ys. Step 4. Plug power into y our power stri p Step 5. Once complete, T ur n the ION™ Drive and your computer on.
22 Before y ou unplug the ION drive, clic k on the green arro w on the lower right cor ner of the Window . A message of [safely Remov e…] will appear, clic k on this message to remov e the device.
23 Device Remo val The system will tell you that y ou can saf ely unplug your ION drive no w . Device Remo val Contin ued Step. 3.
24 Driver Remov al Driver Remov al Driver Remov al Step. 1 F ollow the path of “Start”>”Settings”>”Control Panel”. Step. 2 Click on “Add/Remove Prog rams”.
25 Step. 3 The “Add/Remov e Programs Proper ties” will appear . Select [TPP Storage Driver ...], then click “Add/Remove”. Step. 4 Clic k on “OK” when the system ask y ou if you want to remov e dr iver . Step. 5 After the remov al of the driver , select Restar t Computer and click on Finish.
26 Care & Handling Care & Handling of your ION™ Drive Y our IOGEAR® storage device is a high perf ormance Hi-Speed USB 2.0 HardDr ive (ION™ Drive). The head that reads the information on the disk is a fragile piece of technology . Theref ore, care must be tak en not to bump the ION™ Drive while it is operating.
27 T rou ble Shooting Basic T roubleshooting ION™ - Make sure the drive is turned on bef ore you start-up your computer . - Make y our new IOGEAR® ION™ Drive is the only de vice hooked into the USB 2.0 port. - Do not use a hub or repeater in connecting your drive to the computer .
28 OSD Opera- tion T rou ble Shooting Notes: All URLs are subject to change. If the URLs listed in this man ual are no longer valid, y ou can find the major ity of necessar y updates at http://www .v ersiontr ac k er .com or http://www .do wnload.com.
29 OSD Opera- tion T echnical Suppor t T o help IOGEAR® customers obtain the highest level of perf ormance form their ION™ Drive, IOGEAR® Service Suppor t team is av ailable to ans wer your technical questions. Do not hesitate to call if you are having troub le getting your drive to w ork correctly .
30 Appendix Glossary Desktop - The background area on the computers monitor screen. This area also includes the menu bar . Document windows are not part of the desktop; rather they sit on the desktop . Icon - Symbols used to represent a par ticular object.
31 Specification Product Specification (MODEL: GHE135U) Funct ion Specificatio n Po wer C ons um pt ion 15w Input Voltage 12V DC , 1.6A Conne ct or Type USB 2.0 T ype A Storage T emperature 0-70 C (Cels ius) Operatin g T emperature 0-50 C (Cels ius) Oper at ing H umidi t y 20 to 89% (Non C ondensing) Dimens ions 3.
32 Radio & TV Interference Statement Radio & TV Interf erence Statement W ARNING!!! This equipment generates, uses and can radiate r adio frequency energy and, if not installed and used in accordance with the instruction manual, ma y cause interference to radio communications.
33 Limited W arranty IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY FOR DIRECT , INDIRECT , SPECIAL, INCIDENT AL OR CONSEQUENTIAL D AMA GES RESUL TING FROM THE USE OF THE PR ODUCT , DISK, OR ITS DOCU- MENT A TION EXCEED THE PRICE P AID FOR THE PRODUCT .
23 Hubble Driv e • Ir vine, CA 92618 • (P) 949.428.1111 • (F) 949.428.1100 • www .iogear .com Contact info..
Ein wichtiger Punkt beim Kauf des Geräts IOGear GHE135U (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie IOGear GHE135U noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für IOGear GHE135U - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von IOGear GHE135U reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über IOGear GHE135U erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon IOGear GHE135U besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von IOGear GHE135U verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit IOGear GHE135U. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei IOGear GHE135U gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
