Benutzeranleitung / Produktwartung AEC-6876 des Produzenten AAEON
Zur Seite of 69
Embedded Con troller AEC-6876 AEC-6876 Fanless Embedded Controller I n t e l ® Core TM i5-2510E/ Celeron ® -B810 Processor with 2 Gigabit Ethernet 4 COM, 4 USB, 1 PCI-Express[x4] DVI, HDMI, VGA AEC-68 76 Manual 1st Ed.
Embedded Con troller AEC-6876 i Copyright Notice This document is copy righted, 2012. All rights are reserved. The original manufacturer reserves the right t o make improvements to the products described in t his manual at any time without notice.
Embedded Con troller AEC-6876 i i Acknowledgment s Award is a trademark of Awar d Software International, Inc. CompactFlash ™ is a trademark of the Compact Flash Association. Intel ® , Celeron ® and Core ™ are trademarkes of Intel ® Corporation.
Embedded Con troller AEC-6876 iii Packing List Before you begin operating your PC, please make sure that the following materials have been shipp ed: 1 AEC-6876 Embedded Controller 1 Phoenix Po.
Embedded Con troller AEC-6876 i v Safety & W arranty 1. Read these safety instructions carefully . 2. Keep this user's manual for later referen ce. 3. Disconnect this equipment from any AC outlet before cleaning. Do not use liquid or spray detergent s for cleaning.
Embedded Con troller AEC-6876 v d. The equipment doe s not work well, or you ca nnot get it to work according to the user ’s manual. e. The equipment has been d ropped and damaged.
Embedded Con troller AEC-6876 v i Below T able for China RoHS Requirement s 产品中有毒有害物质或元素名 称及含量 AAEON Boxer/ Industrial Sy stem 有毒有害物质或元素 部件名.
Embedded Con troller AEC-6876 v i i Contents Chapter 1 General Information 1.1 Introduct ion ................................................................ 1-2 1.2 Featur es .................................................................... 1-4 1.
Embedded Con troller AEC-6876 viii Appendix B I/O Information B.1 I/O Addre ss Map ..................................................B-2 B.2 Memory Addr ess Map ..........................................B-4 B.3 IRQ Mappi ng Chart .....................
Embedded Con troller AEC-6876 Chapter 1 General Info rmation 1-1 General Chapter 1 Information.
Embedded Con troller AEC-6876 Chapter 1 General Information 1-2 1.1 Introduction Due to the growing popularity from the IPC market, the newest Boxer series AEC-6876 has bee n introduced by AAEON.
Embedded Con troller AEC-6876 Chapter 1 General Info rmation 1-3 5 g rms. With the anti-vibrati on hard drive device option, the AEC-6876 can be used in high vibration environment s. In addition, the AEC-6876 of fers low power con sumption system that while operating in ambient temperatures ranging from -10° to 55°C.
Embedded Con troller AEC-6876 Chapter 1 General Information 1-4 1.2 Features Fanless Desi gn Intel ® Core™ i5-2510E/ Celeron ® -B810 Processor Intel ® QM67 Chipset Gigabit Etherne.
Embedded Con troller AEC-6876 Chapter 1 General Info rmation 1-5 1.3 Specifications CPU Intel ® Core TM i5-2510E 2.5 GHz/ Celeron ® -B810 1.6 GHz Processor Chipset Intel ® QM67 System Memory DDR3 SODIMM x 2, Max.
Embedded Con troller AEC-6876 Chapter 1 General Information 1-6 Mini Card 1 Indicator Front Power LED x 1, HDD active LED x 1 Power Requirement DC-in 12V , with DC jack lockable, DC 9~30V with.
Embedded Con troller AEC-6876 Chapter 1 General Info rmation 1-7.
Embedded Con troller AEC-6876 Chapter 2 Hardwa re Installation 2-1 Hardware Inst allation Chapter 2.
Embedded Con troller AEC-6876 Chapter 2 Hardwa re Installation 2 - 2 2.1 Dimension A1/A2 version -- + 12V DC.
Embedded Con troller AEC-6876 Chapter 2 Hardwa re Installation 2 - 3 A1M/A2M Version.
Embedded Con troller AEC-6876 Chapter 2 Hardwa re Installation 2 - 4 2.2 RS-232 Box Header (COM1) Pin Signal P i n Signal 1 DCD 2 RXD 3 TXD 4 DT R 5 GND 6 DSR 7 RTS 8 CT S 9 RI 2.3 RS-232/422/485 Pin Header (COM2) Pin Signal P i n Signal 1 DCD 2 RXD 3 TXD 4 DT R 5 GND 6 DSR 7 RTS 8 CT S 9 RI 2.
Embedded Con troller AEC-6876 Chapter 2 Hardwa re Installation 2 - 5 7 GND 8 USBD- 9 GND 10 +5V 2.6 HDD Installation Step 1: Unfasten the two screws on the front and rear panel s.
Embedded Con troller AEC-6876 Chapter 2 Hardwa re Installation 2 - 6 Step 2: Unfasten the six screws on the bottom lid S tep 3: Place the HDD to the HDD bracket and fasten to the bottom lid of AEC-687.
Embedded Con troller AEC-6876 Chapter 2 Hardwa re Installation 2 - 7 S tep 4: Fasten the scre ws on the front an d rear panels, and the brackets of AEC-6876.
Embedded Con troller AEC-6876 Chapter 2 Hardwa re Installation 2 - 8 2.7 CFast Card Installation S tep 1: Unfasten the scre ws on the front and rear panels, and the brackets of AEC-6876 S tep 2: A.
Embedded Con troller AEC-6876 Chapter 2 Hardwa re Installation 2 - 9 2.8 PCI-Express Card Installation Step 1: Unfasten the two screws on the front and rear panel s.
Embedded Con troller AEC-6876 Chapter 2 Hardwa re Installation 2 - 10 Step 2: Unfasten the six screws on the bottom lid S tep 3: Install a hold-do wn bracket to fix the PCI or PCI-Express Card and mak.
Embedded Con troller AEC-6876 Chapter 2 Hardwa re Installation 2 - 1 1 2.9 Wallmount Bracket Installation Fasten the bracket s with the appropriate screws.
Embedded Con troller AEC-6876 Chapter 3 AMI BIOS Setup 3-1 AMI Chapter 3 BIOS Setup.
Embedded Con troller AEC-6876 3.1 System Test and Initialization These routines test and initialize board hard ware. If the routines encounter an error during the test s, you will either hear a few short beeps or se e an error message on the screen. There are two kinds of errors: fatal and non-fat al.
Embedded Con troller AEC-6876 Chapter 3 AMI BIOS Setup 3-3 3.2 AMI BIOS Setup AMI BIOS ROM has a built-in Setup program that allows users to modify the basic system configurat io n. This type of information is stored in battery-backed CMOS RA M so that it ret ains the Setup information when the power is turned of f.
Embedded Con troller AEC-6876 Chapter 4 Driver Installation 4 -1 Driver Chapter 4 Inst allation ..
Embedded Con troller AEC-6876 The AEC-6876 comes with an AutoRun DVD-ROM that contains all drivers and utilities that can he lp you to install the driv er automatically. Insert the driver DVD, the driver DVD-ti tle will auto start and show the installation guide.
Embedded Con troller AEC-6876 4.1 Installation: Insert the AEC-6876 DVD-ROM in to the DVD-ROM d rive. And install the drivers from Step 1 to Step 8 in order. Step 1 – Install Chipset Driver 1. Click on the STEP 1-CHIPSET folder and sele ct the OS folder your system is 2.
Embedded Con troller AEC-6876 Note 2: If the OS is Windows ® XP, you have to install the driver of dotNet Framework firs t. Simply click on dotnetfx35.
Embedded Con troller AEC-6876 Step 6 – Install RAID & AHCI Driver Please refer to the Appendix C RAID & AHCI Settings Step 7 – Install TPM Driver 1. Click on the STEP7-TPM folder and select the folder of OS folder your system is 2. Double click on the Setup.
Embedded Con troller AEC-6876 2. Change User Account Control Settings to [Never notify] 3. Reboot and Administrator login. Chapter 4 Driver Installation 4 -6.
Embedded Con troller AEC-6876 Chapter 4 Driver Installation 4 -7 4. To run patch.bat with [Run as administrator]..
Embedded Con troller AEC-6876 Appendix A P rogra mming the W atchdog T imer A - 1 Programming the Appendix A W atchdog T i mer.
Embedded Con troller AEC-6876 Appendix A P rogra mming the W atchdog T imer A-2 A.1 Programming AEC-6876 utilizes ITE I T8728 chipset as its watchd og timer controller.
Embedded Con troller AEC-6876 Appendix A Programming the W atchdog Timer A-3 There are three steps to complete the configuration setup: (1) Enter the MB PnP Mode; (2) Modify the dat a of configurati on registers; (3) Exit the MB PnP Mode. Undesired result may occur if the MB PnP Mode is not exited normally.
Embedded Con troller AEC-6876 Appendix A P rogra mming the W atchdog T imer A-4 WatchDog Timer Configuration Regis ters Configure Control (Index=02h) This register is write only. Its values are not sticky; that is to say, a hardware reset will automatically cle ar the bits, and does not require the software to cl ear them.
Embedded Con troller AEC-6876 Appendix A Programming the W atchdog Timer A-5 WatchDog Timer Control Registe r (Index=71h, Default=00 h) WatchDog Timer Configuration Regis ter (Index=72h, Default=00h) .
Embedded Con troller AEC-6876 Appendix A P rogra mming the W atchdog T imer A-6 A.2 ITE8728 Watchdog Timer Initial Program .MODEL SMALL .CODE Main: CALL Enter_Configuration_mode CALL Check_Chip mov cl.
Embedded Con troller AEC-6876 Appendix A Programming the W atchdog Timer A-7 ; game port enable mov cl, 9 call Set_Logic_Device Initial_OK: CALL Exit_Configuration_mode MOV AH,4Ch INT 21h Enter_Config.
Embedded Con troller AEC-6876 Appendix A P rogra mming the W atchdog T imer A-8 RET Exit_Configuration_Mode ENDP Check_Chip PROC NEAR MOV AL,20h CALL Read_Configuration_Data CMP AL,87h JNE Not_Initial.
Embedded Con troller AEC-6876 Appendix A Programming the W atchdog Timer A-9 MOV DX,WORD PTR CS:[Cfg_Port+06h] IN AL,DX RET Read_Configuration_Data ENDP Write_Configuration_Data PROC NEAR MOV DX,WORD .
Embedded Con troller AEC-6876 Appendix A P rogra mming the W atchdog T imer A-10 push ax push cx xchg al,cl mov cl,07h call Superio_Set_Reg pop cx pop ax ret Set_Logic_Device endp ;Select 02Eh->Index Port, 02Fh->Data Port Cfg_Port DB 087h,001h,055h,055h DW 02Eh,02F h END Main Note: Interrupt level mapping 0Fh-Dh: not valid 0Ch: IRQ12 .
Embedded Con troller AEC-6876 Appendix B I/ O Informatio n B-1 I/O Information Appendix B.
Embedded Con troller AEC-6876 Appe ndix B I/ O Information B-2 B.1 I/O Address Map.
Embedded Con troller AEC-6876 Appendix B I /O I nformation B-3.
Embedded Con troller AEC-6876 Appe ndix B I/ O Information B-4 B.2 Memory Address Map.
Embedded Con troller AEC-6876 Appendix B I /O I nformation B-5 B.3 IRQ Mapping Chart B.4 DMA Channel Assig nments.
Embedded Con troller AEC-6876 Appendix C RAID & AHCI Settings C - 1 RAID & AHCI A ppendix C Settings.
Embedded Con troller AEC-6876 Appendix C RAID & AHCI Settings C-2 C.1 Setting RAID OS installation to setup RAID Mode S tep 1: Cop y the files below from “ Driver CD -> Raid Dri ver -> F6 .
Embedded Con troller AEC-6876 A p p e n d i x C R A I D & A H C I S e t t i n g s C-3 S tep 3: The setting proced ures “ In BIOS Setup Menu ” A: Adv anced -> SA T A Configuration -> SA T.
Embedded Con troller AEC-6876 Appendix C RAID & AHCI Settings C-4 S tep 5: The setting proced ures “ In BIOS Setup Menu” C: Boot -> Boot Option #1 -> DVD-ROM T ype S tep 6: The setting p.
Embedded Con troller AEC-6876 A p p e n d i x C R A I D & A H C I S e t t i n g s C-5 S tep 7: Press Ctrl-I to enter M AIN MENU S tep 8: Choos e “ 1.
Embedded Con troller AEC-6876 Appendix C RAID & AHCI Settings C-6 S tep 9: RAID Level -> RAID0( S tripe) S tep 10: Cho ose “ Create V olume ”.
Embedded Con troller AEC-6876 A p p e n d i x C R A I D & A H C I S e t t i n g s C-7 S tep 1 1: Choose “ Y ” S tep 12: Cho ose “ 5. Exit ”.
Embedded Con troller AEC-6876 Appendix C RAID & AHCI Settings C-8 S tep 13: Cho ose “ Y ” S tep 14: Setup OS.
Embedded Con troller AEC-6876 A p p e n d i x C R A I D & A H C I S e t t i n g s C-9 S tep 15: Press “ F6 ” S tep 16: Cho ose “ S ”.
Embedded Con troller AEC-6876 Appendix C RAID & AHCI Settings C-10 S tep 17: Cho ose “ Intel(R) ICH8M-E/ICH9M-E/5 Series SA T A RAID Controller ” S tep 18: It will show the model number yo u s.
Embedded Con troller AEC-6876 A p p e n d i x C R A I D & A H C I S e t t i n g s C-11 S tep 19: Setup is starting Windows.
Embedded Con troller AEC-6876 Appendix C RAID & AHCI Settings C-12 C.2 Setting AHCI OS installation to setup AHCI Mode S tep 1: Cop y the files below from “ Driver CD -> Raid Dri ver -> F6.
Embedded Con troller AEC-6876 A p p e n d i x C R A I D & A H C I S e t t i n g s C-13 S tep 3: The setting proced ures “ In BIOS Setup Menu ” A: Adv anced -> SA T A Configurati on -> SA.
Embedded Con troller AEC-6876 Appendix C RAID & AHCI Settings C-14 S tep 5: The setting proced ures “ In BIOS Setup Menu” C: Save & Exit -> Save Changes and Exit S tep 6: Setup OS.
Embedded Con troller AEC-6876 A p p e n d i x C R A I D & A H C I S e t t i n g s C-15 S tep 7: Press “ F6 ” S tep 8: Choos e “ S ”.
Embedded Con troller AEC-6876 Appendix C RAID & AHCI Settings C-16 S tep 9: Choos e “ Intel(R) 5 Series 6 Port SA T A AHCI Controller ” tep 10: It will show the model num ber you select and th.
Embedded Con troller AEC-6876 A p p e n d i x C R A I D & A H C I S e t t i n g s C-17 S tep 1 1: Setup is loadin g files.
Ein wichtiger Punkt beim Kauf des Geräts AAEON AEC-6876 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie AAEON AEC-6876 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für AAEON AEC-6876 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von AAEON AEC-6876 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über AAEON AEC-6876 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon AAEON AEC-6876 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von AAEON AEC-6876 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit AAEON AEC-6876. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei AAEON AEC-6876 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
