Benutzeranleitung / Produktwartung DTV-171 des Produzenten Initial
Zur Seite of 49
17’’[16:9] A V/TV/PC MONIT OR MUL TI-COLOR SYSTEM TV TUNER DTV -171 Operation Manual http://www .initialdvd.com Please read carefully before use..
IMPORT ANT INFORMA TION IMPORT ANT SAFETY PRECAUTIONS SUPPLIED ACCESSORIES PREP ARA TION INSERTING BA TTERIES INTO THE REMOTE CONTROL USING THE REMOTE CONTROL UNIT CAUTIONS REGARDING REMOTE CONTROL UN.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated ’’dangerous voltage’’ within the product’s enclosure that may be of suf ficient magnitude to constitute a risk of electric shock to persons.
The present set has been designed and manufactured to assure personal safety . Improper use can result in electric shock or fire hazard. The safeguards incorporated in the present unit will protect you if you observe the following procedures in installing, using and servicing.
f) When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the product needs servicing. 12. Replacement parts - In case the product needs replacement .
Make sure the following accessories are provided with the product. SUPPLIED A CCESSORIES page4 17 [16:9] A V/TV/PC MONITOR MUL TI-COLOR SYSTEM TV TUNER DTV -171 Operation Manual http://www.
Insert supplied batteries via the battery compartment on the back of the remote control. Make sure polarity matches the (+) and (-) marks inside the compartment. PREP ARA TION page5 INSERTING BA TTERIES INTO THE REMOTE CONTROL ● Do not expose remote to liquids, direct sunlight or shock.
1) POWER BUTTON: Use to turn the unit on and of f. 2) REMOTE SENSOR 3) SOURCE BUTTON: Use to select the A V signal source between: DVD, Analog RGB (PC input), Composite Video, S-V ideo, TV , Component Video, and use the OK button to confirm. 4) EJECT BUTTON: Use to eject the disc being played in the disc slot.
1) ANTENNA IN 2) A V1 IN (Composite V ideo and Audio In) 3) A V2 IN (S-V ideo and Audio In) 4) A V OUT (Composite V ideo and Audio Out) 5) PHONES 6) A V3 IN (Component V ideo and Audio In) 7) VGA (PC .
1) POWER: Use to turn the unit on and off. 2) Number Buttons: Use to set the channel and to enter DVD chapter numbers. 3) MENU: Use to bring up the DVD root menu. 4) Cursor Buttons: Use to select what you want. 5) OK: Use to confirm your selections. 6) SETUP: Use to bring up DVD setup menu.
8) MUTE: Mute the sound. 9) PLA Y :Use to begin the DVD playback. 10)P AUSE:Use to pause the DVD playback. 1 1) FF/FR: Use to play DVD fast forward/backward. 12) SLOW: Use to slow the DVD playback speed. 13) AUTO: Auto adjustment for PC signals. 14) REPEA T : Use to repeat the DVD playback.
Plug the mains cable into the power socket with AC100V~240V , 50/60Hz. Using the supplied antenna cable, connect the room antenna terminal to the antenna input terminal on TV set.
Y ou can enjoy picture and sound by connecting VCR, DVD player and PC to the terminals located on the back of TV set. Before connecting an external device, turn the TV set of f to avoid any possible damage.
1. Press POWER button on the front panel to turn on the TV set. The ST ANDBY/ON indicator lights up green. 2. If the ST ANDBY/ON indicator still lights up red, press POWER on the remote control to turn the TV set on. B ASIC OPERA TIONS page12 TURNING ON THE POWER 1.
1. Press POWER button on the front panel to turn on the TV set. The ST ANDBY/ON indicator lights up green. 2. If the ST ANDBY/ON indicator still lights up red, press POWER on the remote control to turn the TV set on. WA T CHING TV page13 TURNING ON THE POWER 1.
Using number buttons on the remote unit WA T CHING TV page14 Press LAST to switch the currently tuned channel to the previous tuned channel. Press LAST again to switch back to the currently tuned channel. Select the channels directly by pressing the number buttons.
Changing the volume Y ou can change the volume on the front panel or on the remote control unit. Using MUTE on the remote control Press MUTE to mute the current sound output. WA T CHING TV page15 1. Press MUTE . ’’MUTE’’ will display on the screen.
Press TV MENU to bring up the TV menu screen. Press / to select "Channel" and pre ss to enter into the items be low ’’Channel ’’. MENU ADJUSTMENT page16 CHANNEL ADJUSTMENT Automatic channel search Channel auto search finds and memorizes all channels viewable in your area.
MENU ADJUSTMENT page17 Current channel number selection 1. Press TV MENU to bring up the TV menu screen. 2. Press / to select ’’Channel’’. 3. Press / to select ’’Current Channel’’. 4. Press / to select a current channel number you want.
MENU ADJUSTMENT page18 Contrast 1. Press TV MENU to bring up the TV menu screen. 2. Press / to select ’’Picture’’. 3. Press / to move to ’’Contrast’’. 4. Press / to adjust the picture contrast. Brightness 1. Press TV MENU to bring up the TV menu screen.
MENU ADJUSTMENT page19 V olume 1. Press TV MENU to bring up the TV menu screen. 2. Press / to select ’’Audio’’. 3. Press / to move to ’’V olume’’. 4. Press / to adjust the volume. Bass 1. Press TV MENU to bring up the TV menu screen. 2.
Balance 1. Press TV MENU to bring up the TV menu screen. 2. Press / to select ’’Audio’’. 3. Press / to move to ’’Balance’’. 4. Press / to adjust audio output between left and right speakers. Mute This function is to remove the sound. 1.
PC mode input format In case of inputting the PC signal other than above signals, ’’OUT OF RANGE’’ will display . Setup your PC software Even if your actual display-setting screen looks dif ferent from the windows below , basic setup methods will be applied in most of the case.
3. Navigate to the ’’Setting’’ tab on the display dialog box. The correct setting of size (resolution) is ’’1024 x 768 pixels’’. Check the vertical frequency of your PC. MENU ADJUSTMENT page22 WINDOW ADJUSTMENT (CONTINUED) 2. When the control panel screen appears, click on ’’Display’’ and a display dialog box displays.
MENU ADJUSTMENT page23 H-Position 1. Press TV MENU to bring up the TV menu screen. 2. Press / to select ’’W indow’’. 3. Press / to move to ’’H-Position’’.
MENU ADJUSTMENT page24 Press TV MENU to bring up the TV menu screen. Press / to select ’’Options’’ and press to enter into below items. OPTIONS ADJUSTMENT Menu Background 1. Press TV MENU to bring up the TV menu screen. 2. Press / to select ’’Options’’.
TR OUBLESHOO TING page25 Please check the following items before asking for repair service. Symptom Neither picture nor sound. Picture is OK, but no sound. Sound is OK, but no color . The picture is overlapped image. Picture has ’’snow noise ’’.
SPECIFICA TIONS page26 P ANEL RESOLUTION ACTIVE AREA (mm) VIEWING ANGLE (¡,U/D/L/R) BRIGHTNESS (cd/m2) WITH ST AND (mm) WITHOUT ST AND (mm) TV ST ANDARD TUNING SYSTEM STEREO CA TV AV IN COMPONENT MON.
BASIC OPERA TIONS PLA Y DISCS P AUSE OSD VOLUME CONTROL DVD MENU PLA Y SELECT WITH NUMBER BUTTONS PLA Y DISCS IN V ARIOUS W A YS AUDIO MODE MUTE F AST PLA Y SLOW PLA Y REPEA T PLA Y SELECT SUBTITLES A.
DVD 1. Press POWER to turn on the unit. 2. Press the SOURCE button on the remote control to bring up the .
Remember , you can only access the Display when you're playing a disc. Also, the Display features are only available if the disc was created with that particular feature (i.
1. When the disc is playing, press OSD on the remote to bring up the Display . 2. Press the or buttons to highlight the Subtitle icon.
To Use Repeat: 1. While a disc is playing, press OSD on the remote to bring up the Display .
Audio Mode Yo u may select a language from a multi-language DVD. Yo u may select the right channel, left channel, or stereo options from a multi-channel CD. To select a language, press AUDIO .
Yo u may select one mode. Notes: Different discs dif fer in languages available. Mute When playing a disc, this function removes the sound. 1. TO REMOVE SOUND Press MUTE , the screen shows "MUTE".
Slow Play Enjoy slow motion by the following the steps below . 1. Press SLOW to play in slow motion. The screen shows the following in order: DVD 2. Press (PLA Y) to resume play at normal speed.
2. To repeat a disc: Press REPEA T , the screen shows " ALL". The unit plays all the tracks on the disc.
Angles Select Some discs have images with different viewing angles, you may select among them. For example, when you watch a running.
2. Time Search. Press TIME SEARCH until the screen shows: Press number buttons to enter hour , minute and second.
1. Press P .MODE until t he screen shows: 2. Use the number buttons on the remote to enter the track number you want to play first. The track number entered appears in the box.
SETUP SETUP page38 MENU SETTING According to the recorded information an d external equipment, set the following functions for the player to obtain the best playing status. 1.Press SETUP to set options in the main menu.
page39 MENU SETTING 3. Exit setup menu. Press the direction button to exit from "Dual Mono". Press the direction button to exit from "Dolby Digital Setup".
page40 MENU SETTING TV TYPE Yo u may select according to the color system of the TV to be connected. Select "MUL TI"for a multi-system TV . Select "NTSC"for a NTSC TV .
page41 MENU SETTING SPEAKER SETUP The setting structure is: Lt/Rt A disc recorded multi channel soundtrack, the output signal will be incorported to left and right channel.
page42 MENU SETTING 3D PROCESSING The setting structure is: - - 3D Processing Page - - V SURR Off On Off Re.
page43 MENU SETTING MP3 OPERA TIONS SELECT TRACKS WITH NUMBER BUTTONS 1. Insert a disc, the unit will search disc information. The TV screen displays main menu. 2.Press direction key to select song folder .
Digest The "MENU" or "STOP" key is used to display thumbnail size pictures. After it is enabled, up to 12 scaled-down thumbnail pictures will be displayed on the screen. The "NEXT" and "PREV" keys can be used to display the next/prev nine pictures in the the Kodak Picture CD.
No sound Check if the unit is connected securely . Make sure the TV or amplifier is working properly . Make sure the amplifier is set to receive DVD signal output.
Laser Video system Frequency response Signal/noise ratio output level: 2V 10% Load impedance: 10K Ω output level: 0.
Ein wichtiger Punkt beim Kauf des Geräts Initial DTV-171 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Initial DTV-171 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Initial DTV-171 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Initial DTV-171 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Initial DTV-171 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Initial DTV-171 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Initial DTV-171 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Initial DTV-171. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Initial DTV-171 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
