Benutzeranleitung / Produktwartung INF7001A des Produzenten InFocus
Zur Seite of 38
HARDW ARE GUIDE JTOUCH INF7001A 009-1531-00.
.
CONTENTS Declaration of Conformity ...................................................................................................................................................3 Safety Considerations .............................................
.
Page 3 INF7001a Hardware Guide DECLARA TION OF CONFORMITY Manufacturer: InFocus Corporation, 13190 SW 68th Parkway, Portland, Oregon 97223-8368 USA Trademarks Apple, Mac and Facetime are trademarks or registered trademarks of Apple, Inc. Microsoft, Windows, PowerPoint, Excel and Word are trademarks or registered trademarks of Microsoft Corporation.
Page 4 SAFETY CONSIDERA TIONS Please read and follow all safety instructions provided below and on the monitor before connecting the monitor to a power source. Failure to comply with safety instructions may result in fire, electrical shock, or personal injury and may damage or impair protection provided by the equipment.
Page 5 INF7001a Hardware Guide • Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the point where they exit from the monitor. • Unplug the monitor if you are not going to use it for an extensive period of time.
Page 6 WHA T’S INCLUDED Warranty Quick Start Guide HOME INFO RESIZE SWAP VOL UP VOL DOWN BACK MUTE CONTRAST BRIGHTNESS ON/OFF INPUT MENU PIP INPUT AUDIO POSITION OK POWER i USB cable Remote control .
Page 7 INF7001a Hardware Guide SETUP Mounting This product does not ship with mounting accessories. Only use commercially manufactured mounting accessories which meet this product's specifications and follow the manufacturer installation instructions.
Page 8 Connecting to Other Devices A full range of digital and analog video inputs and audio source devices can be connected to the connection panels on the back and side of the monitor. Available jacks include: HDMI In (2), PC In (1), Composite Video (1), Component RCA (1), RS232 (1), Audio In 3.
Page 9 INF7001a Hardware Guide Connecting AC Power 1) Connect one end of the AC power cord to the AC In jack on the back of the monitor. 2) Connect the other end of the AC power cord to an AC outlet. 3) Press the power switch. (The LED on the front of the monitor turns on.
Page 10 USING THE REMOTE The remote uses two (2) AAA batteries (not included). Install the batteries by removing the cover from the remote’s back, aligning the + and – ends of the batteries, sliding them in place and replacing the cover. To operate, point the remote at the monitor sensor at the bottom right-hand corner of the monitor.
Page 11 INF7001a Hardware Guide Remote buttons HOME INFO RESIZE SWAP VO L UP VO L DOWN BACK MUTE CONTRAST BRIGHTNESS ON/OFF INPUT MENU PIP INPUT AUDIO POSITION OK POWER i POWER Power: Switches the power on or puts the monitor into Standby. HOME Home: Changes the active source back to the embedded PC.
Page 12 USING THE KEYP AD The keypad, located on the side of the monitor, has the following buttons: VOL VOL ^ CH CH ^ MENU INPUT ^ ^ Power button: Switches the power on or puts the monitor into Standby. Input button: Turns the Source menu on allowing the user to change sources.
Page 13 INF7001a Hardware Guide OSD (ON-SCREEN DISPLA Y) MENU SYSTEM The OSD provides the user the ability to control the monitor display. To access the OSD, press the Menu button on the remote or the keypad located on the right-hand side of the monitor.
Page 14 Picture Menu Sel Adjust Enter Back Quit < > < < PICTURE BRIGHTNESS CONTRAST SHARPNESS COLOR TEMPERA TURE COLOR CONTROL PICTURE MODE PICTURE RESET NA TIVE ST ANDARD NO 70 50 50 100 100 100 RED BLUE GREEN Brightness: changes the intensity of the image.
Page 15 INF7001a Hardware Guide Screen Menu Sel Adjust Enter Back Quit < > < < SCREEN H POSITION V POSITION CLOCK CLOCK PHASE ASPECT RA TIO SCREEN RESET 50 50 50 50 WIDE NO H Position: adjusts the horizontal position of the image. Range: 0-100.
Page 16 Audio menu Sel Adjust Enter Back Quit < > < < AUDIO SPEAKER AUDIO SOURCE AUDIO RESET INTERNAL MONDO PA D NO Speaker: controls whether both the internal and external speakers (sound bar, etc.
Page 17 INF7001a Hardware Guide PIP menu Sel Adjust Enter Back Quit < > < < PIP PI P SIZE PI P AUDIO PI P RESET SMALL MAIN NO PIP Size: changes the size of the PiP window used in the Corner-to-Corner configuration. Options include: Small (default), Middle and Large.
Page 18 Configuration 1 Sel Adjust Enter Back Quit < > < < CONFIGURA TION 1 LANGUAGE AUTO SOURCE OPERA TION MODE CONFIGURA TION RESET FA CTOR Y RESET ENGLISH YES AIO NO NO Language: switches the OSD menu language. Auto Source: When enabled, automatically searches for an active source.
Page 19 INF7001a Hardware Guide Configuration 2 Sel Adjust Enter Back Quit < > < < CONFIGURA TION 2 OSD TURN OFF OSD H POSITION OSD V POSITION MONITOR INFORMA TION 10 50 50 OSD Turn Off: controls how many seconds the OSD menu remains on the screen Range: 5-120 (seconds).
Page 20 Advanced Option Sel Adjust Enter Back Quit < > < < ADV ANCED OPTION INPUT RESOLUTION GAMMA SELECTION OVER SCAN SCAN CONVERSION IR CONTROL KEYBOARD CONTROL MONITOR ID DDC/CI ADV ANCED OPTION RESET MODE1 ON NORMAL UNLOCK ON NO Input Resolution: sets the resolution of the VGA input.
Page 21 INF7001a Hardware Guide TROUBLESHOOTING SYMPTOM POSSIBLE SOLUTIONS No power • Verify the power cord is properly connected to the power outlet and to the monitor. • Verify the power switch is ON and that the Power button on the remote or keypad has been turned on (the front LED should be white).
Page 22 Audio noise • If using external speakers, verify that "Analog Audio Out" within the Audio>Advanced Audio submenu, is set to Variable. • If using external speakers, verify that "TV speaker" within the Audio menu, is set to Off.
Page 23 INF7001a Hardware Guide LED Indicators FRONT LED (near IR sensor) SOLUTION Off • The monitor is powered off. Press the Power button on the remote or keypad.
Page 24 SPECIFICA TIONS To read the latest product specifications, be sure to visit our support website at www.infocus.com/support, as specifications are subject to change. Size (viewable) 69.51” (176.56cm) diagonal Dimensions (without stand) 65.3" W x 39.
Page 25 INF7001a Hardware Guide LIMITED W ARRANTY InFocus Limited Warranty For InFocus Branded Hardware Products Only LIMITED WARRANTY. InFocus’s warranty obligations for the hardware products are limited to the terms set forth herein.
Page 26 ANY PROGRAMS OR DATA OTHER THAN SOFTWARE INSTALLED BY INFOCUS WHEN THE PRODUCT IS MANUFACTURED. To enable InFocus to provide the best possible support and service during the Limited Warranty P.
Page 27 INF7001a Hardware Guide TO THE EXTENT PERMITTED BY LAW, THIS WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL, WRITTEN, STATUTORY, EXPRESS OR IMPLIED.
Page 28 Technical Support or an ASP will help determine whether your product requires service and, if it does, will inform you how InFocus will provide it. You must assist in diagnosing issues with your product and follow InFocus’s warranty processes.
Page 29 INF7001a Hardware Guide PRIVACY. InFocus will maintain and use customer information in accordance with the InFocus Privacy Policy available at www.
Page 30 APPENDIX Calibration T ool 1) From your Start menu, navigate to All Programs>PQLabs Software>MultiTouch Platform, and double-click MultiTouchPlatform . 2) The MultiTouch Platform window displays. 3) Using a mouse and keyboard, click Calibrate .
Page 31 INF7001a Hardware Guide 4) Do not touch the screen until the white cross and the message Touch + for more than 1 second " displays. 5) Using a stylus (or your finger), touch and hold the white cross until the cross turns green and the message Please release your finger displays.
Page 32 Calibration T roubleshooting T ool 1) From your Start menu, navigate to All Programs>PQLabs Software>MultiTouch Platform, and double-click MultiTouchPlatform . 2) The MultiTouch Platform window displays. 3) Click Diagnose . The Start MultiTouch Doctor window displays.
Page 33 INF7001a Hardware Guide 5) If a check mark appears, the panel has passed that test. If a red X appears, the panel has failed. In that case, follow the instructions in the Details box. 6) If instructed to send a report to the PQ Labs team, click Send report , type your information, and click Send .
Page 34 安全注意事項 在將顯示器連接到電源之前，請仔細閱讀並遵守顯示器上提供的下述安全說明。如不遵守安全說明則可能導致火災、觸電或 人身傷.
Page 35 INF7001a Hardware Guide JT ouch 70” 顯示器 I/O port 介紹前/後面板 RS232 HDMI1 HDMI2 COMPONENT VIDEO PC IN TOUCH CONTROL L R Audio Audio OUT IN 1 IN 2 A B C TOUCH CONTROL A TOUCH CON.
Page 36 RS232 L R Audio Audio OUT IN 1 IN 2 C RS232 連接外部數據機。 MIC 連接至麥克風。 AUDIO IN1 接收來自外部裝置（例如 iPod 播放器）所發出的音頻訊號。 AUDIO IN.
Ein wichtiger Punkt beim Kauf des Geräts InFocus INF7001A (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie InFocus INF7001A noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für InFocus INF7001A - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von InFocus INF7001A reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über InFocus INF7001A erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon InFocus INF7001A besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von InFocus INF7001A verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit InFocus INF7001A. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei InFocus INF7001A gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
