Benutzeranleitung / Produktwartung 831.105021 des Produzenten Image
Zur Seite of 24
® Model No. 831.105021 Serial No. Write the serial number in the space above for reference. The serial number decal is found on the frame behind the access cover . CAUTION Read all precautions and instruc- tions in this manual before using this equipment.
T ABLE OF CONTENTS IMPORT ANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 IMPORT ANT SAFETY INSTRUCTIONS W ARNING: TO REDUCE THE RISK OF DROWNING, ELECTRIC SHOCK, OR SERIOUS INJUR Y , READ THE FOLLOWING IMPORT ANT PRECAUTIONS BEFORE USING THE HYDROTHERAPY SP A.
4 Do not use the spa until the GFCI has been repaired or replaced by a qualified electri- cian. 20. Keep all electrical appliances such as radios, telephones, televisions, and lights at least five feet (1.5 m) away from the water . 21. DANGER—Risk of electric shock: Do not set up the hydrotherapy spa within five feet (1.
5 33. W ARNING—T o reduce the risk of injury: It is especially important for persons over the age of 35 or persons with pre-existing health problems, such as obesity , heart disease, high or low blood pressure, circulatory prob- lems, or diabetes to consult their physician before using this product.
6 BEFORE YOU BEGIN Thank you for selecting the innovative IMAGE ® RENEW 510 hydrotherapy spa. The RENEW 510 offers the features and quality of a traditional hot tub at an affordable price. Best of all, the RENEW 510 pro- vides the benefits of hydrotherapy in the comfort and privacy of your own home.
7 CHOOSING A LOCA TION FOR THE HYDROTHERAPY SP A There are many factors to consider when choosing a location to set up the hydrotherapy spa. These factors vary depending on whether you use the hydrotherapy spa inside or outside. We have listed several factors you may wish to consider as you decide where you want to use the hydrotherapy spa.
8 SET -UP AND ASSEMBL Y Before beginning assembly , carefully read the following information and instructions: • Place all parts in a cleared area and remove the packing materials from the spa shell; do not dis- pose of the packing materials until assembly is completed and the spa is in operation.
9 Fill to Here 3 4 4. Place the Spa Cover (18) over the spa. Make sure that the Spa Cover is centered. Snap a Buckle (2) onto each of the four latches on the Spa Cover (18). Pull down one of the straps on the Spa Cover (18) and hold the Buckle (2) against the wood panels on the side of the spa.
USING THE HYDROTHERAPY SP A The hydrotherapy spa is designed to seat two adults. The ten thera-jets can be regulated to provide a relax- ing massage to sooth away stress, and the strength of the water massage can be adjusted by the air con- trol.
11 A A B B D C E B A A SP A SHELL DIAGRAM SP A OPERA TION Refer to the diagram above. The function of each component is explained below: The six uni-directional thera-jets (A) are located on the sides of the spa. Five jets focus a water massage on your upper or lower back.
12 Refer to the diagram above. The function of each control is explained below: T emperature Buttons: Control the temperature setting of the water . The temperature can be set from 70°F to 104°F . The water heats at about 1.8°F per hour with the cover on.
13 SECURING THE SP A COVER T o secure the spa cover , snap the latches on the spa cover into the buckles on the side panels. T o lock the buckles, insert the key and turn it clockwise 1/4 turn. T o unlock the buckles, insert the key and turn it counter- clockwise 1/4 turn.
14 The hydrotherapy spa is designed to provide you with years of enjoyment. Please follow the guidelines below to properly maintain the spa. MAINTENANCE SCHEDULE DAIL Y • Check the water level and refill the spa to the level shown in step 3 on page 9.
15 Additional chemicals can be purchased at a pool and spa supply store. CAUTION: The chemicals used to maintain the pH balance of the water and to sanitize the water can be dangerous. Always follow these basic guide- lines when handling the chemicals: 1.
16 DRAINING THE HYDROTHERAPY SP A The hydrotherapy spa should be drained at least four times a year and refilled with clean water . Y ou may need to drain the spa more often, depending on the user load. This must be done, because after repeated chemical treatment, the water becomes chemically saturated.
17 WINTER USE AND CARE The hydrotherapy spa is designed for year-round use. If you decide to store the hydrotherapy spa for the winter , store it in a warm, dry location. Follow the steps below to winterize the hydrotherapy spa. 1. Drain the spa (see DRAINING THE HYDROTHERAPY SP A on page 16).
18 1. SYMPTOM: THE SP A WILL NOT OPERA TE a. Check to see if the GFCI breaker is tripped, or was not turned on. Reset the GFCI breaker . 2. SYMPTOM: THE CIRCUIT BREAKER OR THE GFCI TRIPS WHILE THE SP A IS OPERA TING a. Reset the circuit breaker or the GFCI.
19 8. SYMPTOM: THE W A TER PULSA TES OR THERE IS MINIMUM W A TER FLOW a. Adjust the water level. This usually occurs only when the water level is low . Add water until the thera-jets are covered (see step 4 on page 9). 9. SYMPTOM: THE W A TER LEVEL DROPS a.
20 P ART LIST—Model No. 831.105021 R1200A Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. 1 8 Buckle Screw 2 4 Buckle 3 4 #8 x 5/8” Screw 4 4 M.
21 EXPLODED DRA WING—Model No. 831.105021 R1200A 4 28 5 13 29 12 3 14 9 16 16 3 9 15 1 2 2 7 17 18 26 25 20 20 31 20 27.
22 NOTES.
23 NOTES.
ORDERING REPLACEMENT P ARTS T o order replacement parts, simply call our Customer Service Department toll-free at SEARS 1-800-4MYHOME (469-4663), or SEARS 1-877-LEFOYER (533-6937) 24 hours a day . T o help us assist you, please be prepared to give the following information when calling: • The MODEL NUMBER of the product (831.
Ein wichtiger Punkt beim Kauf des Geräts Image 831.105021 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Image 831.105021 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Image 831.105021 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Image 831.105021 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Image 831.105021 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Image 831.105021 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Image 831.105021 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Image 831.105021. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Image 831.105021 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
