Benutzeranleitung / Produktwartung NI-707502 des Produzenten Icidu
Zur Seite of 76
FCC STATEMENT This equipment has been tested and found to comply with the limits for a class B digit al device, pursuant to part 15 of the FCC Rules. These limits are des igned to provide reasonable protect ion aga inst harmful inter ference in a residential insta llation.
EN 301 489-1 V .1. 4.1 (20 02) / EN 301 489- 17 V .1.2. 1 (2002) EN 60950-1: 2001 European standar ds dict ate maximum rad iated t ransmit power of 100m W EIRP and frequency range 2.400-2.4835GHz; In France, the equipment m ust be restricted to the 2.
Package content s ....... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ....... ...... ...... ...... ...... .. 1 Chapter 1: About this Guide ....... ...... ...... ...... ...... ...... ...... ...... ...... ...... .
5.8.4 MAC Fi ltering... ...... ...... ...... ...... ...... ....... ...... ...... ...... ...... ...... ...... ...... ...... ...... 47 5.8.5 Remote Manageme nt ..... ...... ...... ...... ...... ...... ...... ...... ...... ...... ....... ...... ...... ..
NI-707502 54M Wireless Router Use r Guide - 1 - Package content s The following c ontent s should be f ound in your box: One NI-70750 2 54Mbps Wireless Router One AC power Adapter for NI-70750.
NI-707502 54M Wireless Router Use r Guide - 2 - Chapter 1: About this Gu ide Thank you for cho osing the NI-707502 54Mbps Wireless Router . T his router provides dedicated solut ion for Small Of f ice/Ho me Of fice (SOHO) netw orks.
NI-707502 54M Wireless Router Use r Guide - 3 - Chapter 2: Introdu ction 2.1 Overview of the Router Th e NI - 70 7 50 2 5 4M b p s Wir e le ss Ro ut er int egr at es 4 -port Switch, fir e w al l, NA T -r ou t er and Wi r el es s AP .
NI-707502 54M Wireless Router Use r Guide - 4 - PPPoE. Built-in NA T a nd DHCP ser ver supporting st atic IP address distributing. Built-in firewall supporting IP address filtering, Domain Name filtering, and MAC address filter ing. Supports connecting/d isconnecting fro m the Internet on a specified ti me of day .
NI-707502 54M Wireless Router Use r Guide - 5 - 2.3.2 The Re ar Panel The rear p anel cont ains th e following feat ures. (V iew from right t o left) AC power socket: only use the power adapter supplied with the NI-707502 54Mbps Wireless Rout er , use of a dif ferent adapter may resu lt in product da mage.
NI-707502 54M Wireless Router Use r Guide - 6 - Chapter 3: Conn ecting the Router 3.1 System Requirements Broadband I nternet Access Serv ice (DSL/Ca ble/Ethernet) One DSL/Cable modem that has.
NI-707502 54M Wireless Router Use r Guide - 7 - Figure 3-1 Hardware Inst allation of the NI- 707502 54Mb ps Wi reless Router.
NI-707502 54M Wireless Router Use r Guide - 8 - Chapter 4: Quick Inst allation Guide After connecting the NI-707502 Router into your network, you should configure it. This chapter describes how to configure the basic functions of your NI-707502 Wireless Router .
NI-707502 54M Wireless Router Use r Guide - 9 - Figure 4-1 Success ful result of Ping c ommand If the result disp layed is si milar t o that show n in figur e 4-2, it means that y our PC has not connected to t he router . Figure 4-2 Failed r esult of Ping co mmand Please check i t followin g these ste ps : 1.
NI-707502 54M Wireless Router Use r Guide - 10 - 4.2 Quick Installation Guide With a Web-based (Internet Explorer or Netsca pe ® Navigator) utility , it is easy to configure and manage the N I-707502 54Mbps W ireless Router . The Web-based utility can be used o n any W indows, Macintosh or U NIX OS with a web browser .
NI-707502 54M Wireless Router Use r Guide - 1 1 - Click Next , then Choose WAN Connecti on Type page will appear, shown in figure 4-6. Figure 4-6 Choose W AN Connecti on Type The router support s three popular ways to conn ect to Internet. Please s elect one compatible w ith your ISP.
NI-707502 54M Wireless Router Use r Guide - 12 - Default Gat eway - Enter the gateway IP address int o the box if requ ired. Primary DNS - Enter the DNS Server I P address into the boxes if require d. Secondary DNS - If your ISP provides an other DNS serv er, enter it into this field.
NI-707502 54M Wireless Router Use r Guide - 13 - Figure 4-10 Quick Setup - Finish After finishing all configurations o f basic network par ameters, please click Finish button to exit this Quic k Setup .
NI-707502 54M Wireless Router Use r Guide - 14 - Chapter 5: Configu ring the Router This chapter describes ea ch web pa ge's key funct ions. 5.1 login After y our successful login, you can configure and manag e the router . There are ten main menus on the left of the web-based utility .
NI-707502 54M Wireless Router Use r Guide - 15 - Figure 5-1 Router S tatus 5.3 Quick Setup Please refer to Section 4.2: "Quick Insta llation Guid e.
NI-707502 54M Wireless Router Use r Guide - 16 - 5.4 Network Figure 5-2 the Network menu There are three submenus under the Network menu (shown i n figure 5-2): LAN , W A N and M A C Clone. Click any of them, and you wil l be abl e to configure the correspondi ng function.
NI-707502 54M Wireless Router Use r Guide - 17 - Static IP . If you are given a user name and a passwor d, please select the type of your ISP provided(PPP oE/BigPond/ L2TP/PPTP) . If you are not sure which connection type you use current ly, please contact your ISP to obtain the correct infor mation.
NI-707502 54M Wireless Router Use r Guide - 18 - this option. (Th is is rarely required.) 2. If y ou choose Static I P, y ou should have fixed IP Para meters sp ecified by y our ISP.
NI-707502 54M Wireless Router Use r Guide - 19 - Figure 5-6 W AN - PPPo E User Name/Password - Enter the User Name and Password provided by your ISP . These fields are case-sen sitive. Connect on Demand - Y ou can configure the router to d isconnect your Internet connection after a specified period of inactivity ( Max Idle Time ).
NI-707502 54M Wireless Router Use r Guide - 20 - use this opti on, click the r adio button. I f you want y our Internet connection to remain active at all times, enter "0" in the Max Idle T ime field. Otherwise, enter the number time in minutes that you wish to h ave the Internet connecting last unless a new link is requested.
NI-707502 54M Wireless Router Use r Guide - 21 - DNS serv er . If a secondary DNS server address is av ailable, enter it as we ll. Click the Sav e button to s ave your settings. 4. If you choose 802.1X + Dynamic IP , you should enter the f ollow parameters( figure 5-8) : Figure 5-8 802.
NI-707502 54M Wireless Router Use r Guide - 22 - Figure 5-9 802.1X + S tatic IP Settings User Name - Enter the us er name for 802.1X authent ication provided by your I SP Password - Enter the passw ord for 802.1X authentication provided by your I SP.
NI-707502 54M Wireless Router Use r Guide - 23 - Figure 5-10 Bi gPond Set tings User Name/Password - Enter the User Name and Password provided by your ISP . These fields are case-sen sitive. Auth Server - Enter the authenti cating server IP address or host na me.
NI-707502 54M Wireless Router Use r Guide - 24 - your connection automatical ly as soon as you attempt to access the Internet again. T o use this option, cl ick the radio button. If you want your Internet connection to remain active at all times, enter "0" in the Max Idle Time field.
NI-707502 54M Wireless Router Use r Guide - 25 - Click the Connect button to connect immediately , C lick the Disconnect but ton to disconnect i mmediately . Connect on Demand - Y ou can c onfigure t he rout er to disconn ect fr om your Internet connection after a specified period of inactivity ( Max Idle Time ).
NI-707502 54M Wireless Router Use r Guide - 26 - Figure 5-12 PP TP S ettings User Name/Password - Enter the User Name and Password provided by your ISP . These fields are case-sen sitive. Dynamic IP/ St atic IP – Choose either as you are gi ven by your ISP and enter the ISP’s I P ad dress or the d omain na me.
NI-707502 54M Wireless Router Use r Guide - 27 - have elap sed before y our Internet conn ection termin ates. Caution : Sometimes the c onnection cannot be disc onnected although you specify a time to Max Idle T ime, sin ce so me applicat ions are visiting the Internet continually in the backgroun d.
NI-707502 54M Wireless Router Use r Guide - 28 - Note : 1) Only the PC o n your LA N can use the MAC A ddress Clone feature. 2) If you click th e Save butto n, the router will prompt y ou to reboot.
NI-707502 54M Wireless Router Use r Guide - 29 - SSID - Enter a value of up to 32 characters. The same name (SSID) must be assigned to all wireless dev ices in your network. The default SSID is ICIDU, but it is recommende d strongly that you change your networks name (SSI D) to a different value.
NI-707502 54M Wireless Router Use r Guide - 30 - • WP A / WP A2 - Select W P A / WP A2 authent ication type based on Radius Server . Authenticati on Optio ns - You can select one of t he followi.
NI-707502 54M Wireless Router Use r Guide - 31 - Group Key Upd ate P eriod - Specify the group k ey update interv al in seconds . The value can be either 0 seconds or from 30 seconds and up, 1-29 seconds are not usable figures. Enter 0 t o disable the upd ate.
NI-707502 54M Wireless Router Use r Guide - 32 - Description - A simple description o f the wireless station. WEP K ey - Specify a unique W EP ke y (in Hexa decimal format) to a ccess t he r outer . To set up an entry, follow these instructions: First, you must decide whether the unspecified wireless station s can access the router or not.
NI-707502 54M Wireless Router Use r Guide - 33 - 3. Click the Sav e button. Click the Enabl e All button to make all entri es enabl ed Click the Disa bled A ll button to make all entr ies disabled.
NI-707502 54M Wireless Router Use r Guide - 34 - router. 5.5.3 Wi reless S tati stics This p age s hows MAC A ddress , Current St atus , Received Packet s and Sent Packet s for each connect ed wirele ss statio n.
NI-707502 54M Wireless Router Use r Guide - 35 - on the LAN. The D HCP S erver can be con figured on the page (shown in figur e 5-20): Figure 5-20 D HCP Settings DHCP Server - En able or Disa ble the DHCP server .
NI-707502 54M Wireless Router Use r Guide - 36 - Figure 5-21 D HCP Client s List Index - The in dex of the DHCP Client Client Name - The name of the DHCP clie nt MAC A ddress - The MAC address of the DHCP client Assigned IP - The IP add ress that the r outer has allocated t o the DHC P client.
NI-707502 54M Wireless Router Use r Guide - 37 - 3. Click the Sav e button when finished. Figure 5-23 Add or Modify a Address Reservatio n Entry T o modify or delete an exi sting entry: 1. Click the M odify in the entry you want to modify . If you want to delete t he entry , click the Delete .
NI-707502 54M Wireless Router Use r Guide - 38 - because its IP Address may change when using the D HCP function. You can set up virtual serv ers on this pag e, shown in figure 5-25: Figure 5-25 Vi rtual Serv ers Service Port - The numbers of External P orts.
NI-707502 54M Wireless Router Use r Guide - 39 - Note: It i s possible that you h ave a computer or server that ha s more than one type of available service. I f so, select another service, and enter the same IP Address f or that computer or serv er .
NI-707502 54M Wireless Router Use r Guide - 40 - T rigger Port - The port for outgoing traf fic. An outgoing co nnection using this port will "T rigger" this rule. T rigger Proto col - The protocol used for T rigger Port s, either TCP , UDP , or Al l (all protocols su pported by the router).
NI-707502 54M Wireless Router Use r Guide - 41 - 1. Click the M odify in the entry you want to modify . If you want to delete t he entry , click the Delete . 2. Modify the information. 3. Click the Sav e button. Click the Enabl e All button to make all entri es enabl ed Click the Disa bled A ll button to make all entr ies disabled.
NI-707502 54M Wireless Router Use r Guide - 42 - Figure 5-30 U PnP S ettings Current UPnP Stat us - UPnP can be en abled or disabled by c licking the Enable or Disable button. As allow ing this may present a risk to secur ity, this fea ture is disabled by default.
NI-707502 54M Wireless Router Use r Guide - 43 - on or off. The de fault setting for t he switch is off. If the general firewall sw itch is off, even if IP Address Filtering, DNS F iltering and MAC Filtering are enabled, their settings are ineffective.
NI-707502 54M Wireless Router Use r Guide - 44 - Figure 5-33 IP address Filterin g To disable th e IP Address Filtering feature, keep the default setting, Disabled . To set up an IP Address Fil tering entry , cl ick Enable Firewall and Enable IP Ad dress Filtering on the Firewall page, and click the A dd New… button.
NI-707502 54M Wireless Router Use r Guide - 45 - Keep the field open, which means all W AN IP Addresses have b een put i nto the field. 5. WAN Port - Enter a W AN Port or a range of W AN Ports in t he field. For e xample, 25 – 110. Keep the field ope n, which means all W AN Ports have been put into the field.
NI-707502 54M Wireless Router Use r Guide - 46 - Figure 5-35 D omain Filt ering Before adding a Domain Filtering entry, you must ensure that Enable Firewall and Enable D omain Filtering have been selected on the Firewall page. To Add a D omain filtering entry , click the Add New… button.
NI-707502 54M Wireless Router Use r Guide - 47 - Click the Enabl ed Al l button to make all e ntries enabled . Click the Disa bled A ll button to make all entr ies disabled. Click the Delete A ll button to delete all entries Click the Next button to go to the next page and the Previous button to return to the previous page.
NI-707502 54M Wireless Router Use r Guide - 48 - Figure 5-38 Add or Modify a MAC Address Filter ing entry To add or m odify a MAC Addre ss Filtering e ntry, follow these instruct ions: 1. Enter the appropriate MAC Address into the M AC Address field. The f ormat of the MAC Address is XX-XX-X X-XX-XX-X X (X i s any hexadecimal digit).
NI-707502 54M Wireless Router Use r Guide - 49 - This feature a llows you to manag e your Router from a remote location, via the Int ernet. Figure 5-39 R emote Ma nagement Web Management Po rt - W eb browser access normally uses the standard HTTP service port 80.
NI-707502 54M Wireless Router Use r Guide - 50 - Figure 5-40 Advanced Security settings Packet s St atistic interval (5 ~ 60) - Th e default value is 10. Select a value between 5 and 60 seconds in the pull-down list. The Packets Stati stic interval value indicates the time section of the packets statistic.
NI-707502 54M Wireless Router Use r Guide - 51 - cannot acces s the router . Forbid Ping Packet from L A N Port - Enable or D isable forbidding Ping Packet to access the router from the LAN port. The default value is disabled. If enab led, the ping packet f rom the LAN port canno t access the router .
NI-707502 54M Wireless Router Use r Guide - 52 - Destinatio n I P Address - The Destinatio n I P Address is the address of the network or host that you want to assign to a static ro ute. Subnet Mask - The Subnet Ma sk deter mines which portion o f an IP Address is the network portio n, and whic h portion is the ho st portion.
NI-707502 54M Wireless Router Use r Guide - 53 - Figure 5-44 D yndns.org D DNS Settings To set up for DDNS, follow these instruction s: 1. T ype the domain names y our dynamic DN S service prov ider gave. 2. T ype the User Nam e for your D DNS account.
NI-707502 54M Wireless Router Use r Guide - 54 - 1. T ype the User Nam e for your D DNS account. 2. T ype the Pass word for your DDN S account. 3. Click the Lo gin button to logi n the DDNS s ervice. Connection Status - The status of the DD NS service connection is displayed here.
NI-707502 54M Wireless Router Use r Guide - 55 - 5.1 1 System T ools Figure 5-47 The System T ools menu There are eight submenus under the System T ools menu (shown in figure 5-47): Time , Firmware , Factory Default s, Backup and Restore, Reboot, Password, L og and St atistics.
NI-707502 54M Wireless Router Use r Guide - 56 - Click the Get GMT b utton to get GMT t ime from I nternet if you have connecte d to Internet. If you’re using Daylight sa ving time, please follow the st eps below . 1. Select using d aylight sa ving time .
NI-707502 54M Wireless Router Use r Guide - 57 - being upgra ded. 2. The router wi ll reboot after the Upgrading has been f inished. 5.1 1.3 Factory Default s This page (show n in figure 5-50) allows you to restore the factory default settings for the router .
NI-707502 54M Wireless Router Use r Guide - 58 - Figure 5-52 R eboot the router Click the Rebo ot button t o reboot the rout er. Some setting s of the route r will take ef fect only after rebooting, which include: • Change LAN I P Address.
NI-707502 54M Wireless Router Use r Guide - 59 - Figure 5-54 System Log The router can keep logs of all traffic. You can query the logs to find what happened to the router. Click the Refre sh button t o refresh the logs. Click the Clear L og butto n to clear all the logs.
NI-707502 54M Wireless Router Use r Guide - 60 - Statistics Ta ble: IP Address T he IP Address displayed with s tatistics Total Packets The total amount of packets received and transm itted by the router. Bytes The total amount of bytes received and transmitted b y the router.
NI-707502 54M Wireless Router Use r Guide - 61 - Append ix A : F A Q 1. How do I co nfigure the r outer to acce ss Internet by ADSL users ? 1) First, configure t he ADSL modem configured i n RFC1483 br idge model. 2) Connect the Ethernet cable from your ADSL modem to the WAN port on the router .
NI-707502 54M Wireless Router Use r Guide - 62 - Connection T ype", finish by clicking “S ave”. 2) Some ISPs re quire that y ou register the M AC Addre ss of your ada pter , which is connected to your cable or D SL modem during insta llation.
NI-707502 54M Wireless Router Use r Guide - 63 - A-5 Add or Mod ify a Virt ual server Entry Note : Y our o pposite side should call your WAN IP , which is displayed on the “S tatus” p age. 4) How to enable DMZ Host: Logi n to the router , click the “Forwarding” menu on the l eft of your b rowser , and click "D MZ" submenu.
NI-707502 54M Wireless Router Use r Guide - 64 - Note : If the above configuration takes ef fect, to configure to the router by typing http://192. 168.1.1:88 (the router ’s LAN IP address: Web Management Port) in the address f ield of the web browser .
NI-707502 54M Wireless Router Use r Guide - 65 - Append ix B: Configuring the PC In this sectio n, w e’ll intr oduce how to install and configure the TCP/IP correctly in Windows 95/98. First make sure your Ethernet Adapter is working, refer to the adapter’s manual if neede d.
NI-707502 54M Wireless Router Use r Guide - 66 - Network wind ow that app ears. An example is s hown in the f ollowing figure: Figure B-3 Configur ation t ab 3) Click on Properti es . The following TCP/IP Properti es window w ill display and the IP A ddress tab is ope n on this window by default.
NI-707502 54M Wireless Router Use r Guide - 67 - Figure B-5 Gatew ay t ab c. Choose Disable DNS on the DNS configuration tab, as shown in the following figure: Figure B-6 DNS Configuration t ab • Setting IP address m anually a. Select S pecify an IP address on IP Address ta b, as shown i n the following figure.
NI-707502 54M Wireless Router Use r Guide - 68 - Figure B-7 IP A ddress t ab b. T ype the router ’s LAN IP add ress (the default IP is 192.168.1.1) into the New gateway field on the Gateway tab, and cl ick on the Add button, as shown in the figure: Figure B-8 Gatew ay t ab c.
NI-707502 54M Wireless Router Use r Guide - 69 - Add butt on . Shown below : Figure B-9 DNS Configuration t ab Now , all the co nfiguration s are finished, it will ta ke ef fect after r eboot.
NI-707502 54M Wireless Router Use r Guide - 70 - Append ix C: Specification s General S tandards IEEE 802.3, 80 2.3u, 802. 1 1b and 802.1 1g Protocols TCP/IP , PPPoE, D HCP , ICM P , NA T , SNTP Ports.
NI-707502 54M Wireless Router Use r Guide - 71 - Append ix D: Glossar y 2x to 3x eXtended Range ™ WLAN Transmission Technology - The WLAN device with 2x to 3x eXtended Range ™ W LAN transmissio n technology m ake its sensitivity up to 105 dB, which gives users the ability to ha ve robust, longer-range wireless connections.
NI-707502 54M Wireless Router Use r Guide - 72 - NAT ( N etwork A ddress T ranslation) - NAT technology translates IP address es of a local area netw ork to a dif ferent IP addre ss for the I nternet.
Ein wichtiger Punkt beim Kauf des Geräts Icidu NI-707502 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Icidu NI-707502 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Icidu NI-707502 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Icidu NI-707502 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Icidu NI-707502 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Icidu NI-707502 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Icidu NI-707502 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Icidu NI-707502. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Icidu NI-707502 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
