Benutzeranleitung / Produktwartung PRO/100 SP des Produzenten IBM
Zur Seite of 72
In t e l ® P R O/ 1 00 S P Mob i le Co m b o A d apt e r Us e r ’ s G u i d e OP T I ONS by I B M.
Note: Before using this information and the pr oduct is supports, read the information under “Appendix E. Product warranty and notices” on page E-1. First Edition (February 2001) © Copyright International Business Machines Corporation 2001. All rights reserved.
Contents Safety: Read first .................... v About this book .................... v i i Part 1: Installation and user ’ s guide ............. 1 - 1 Appendix A. T roubleshooting ............... A - 1 Appendix B. Modem function ............... B - 1 Appendix C.
iv Intel ® PRO/100 SP Mobile Combo Adapter: User ’ s Guide.
Safety: Read first Before installing this pr oduct, read the Safety Information. Antes de instalar este produto, leia as Informa çõ es de Seguran ç a. Pred instal ací tohot o produktu si pr ectete prí r ucku bezpecnostních instr ukcí. L æ s sikkerhedsforskrifterne, f ø r du installer er dette produkt.
Antes de instalar este produto, leia as Informa çõ es sobr e Seguran ç a. P red inštaláciou tohto zariadenia si pečítaje Bezpečnostné predpisy. Antes de instalar este producto lea la informaci ó n de seguridad. L ä ss ä kerhetsinformationen innan du installerar den h ä r pr odukten.
About this book This manual contains instructions for installing and using your Intel ® PRO/100 SP Mobile Combo Adapter . The manual is divided into two parts: Part 1: Installation and user ’ s guide: This guide contains the product description, har dware and software installation.
viii Intel ® PRO/100 SP Mobile Combo Adapter: User ’ s Guide.
Part 1: Installation and user ’ s guide This section contains instructions on how to install and use the Intel PRO/100 SP Mobile Combo Adapter . System requirements Before installing the PRO/100 ada.
Installing the Ethernet and modem device drivers in Windows Me T o install the PCI Ethernet Controller device driver and the Lucent W in Modem device driver in W indows Me, do the following: Note: Use the Add New Hardware W izard for installing only the PCI Ethernet Controller .
8. Click Next on Driver Files Search Results. 9. If The Digital Signature Not Found window opens, click Ye s to continue. 10. When installation of the PCI Ethernet Controller completes, click Finish. 11 . Click Start → Run . 12. T ype x :modemwin2Ksetup.
The Installing Modem Drivers window opens and the W izard finds a Lucent W in Modem. 17. Restart the computer to finish the Lucent W in Modem installation.
14. Click Start → Run. 15. Enter x :modemwin9xsetup.exe where x is the drive letter of the CD-ROM drive. 16. Follow the instructions on the screen. 17. Restart the computer . As you configur e your communication software, you will be prompted to select a modem.
16. Follow the instructions on the screen. 17. Restart the computer . As you configur e your communication software, you will be prompted to select a modem. 18. Select Lucent W in Modem to complete the Lucent W in Modem device driver installation. Installing the Ethernet and modem device drivers in Windows NT 4.
21. T ype x :modemwinntsetup.exe where x is the drive letter of the CD-ROM drive. 22. Click OK on Do you want to install the modem driver? After the Lucent W in Modem driver installs, click OK to restart your computer . 23. Exit W indows Explorer and r estart to complete installation of the Lucent W in Modem driver .
Advanced features This section presents advanced information for adapters that support the advanced features listed. T asks within this section should be handled only by system administrators. Advanced adapter features T o access the advanced features of the adapter , perform the following: 1.
1. From the W indows 98 desktop, right-click on My Computer and choose Properties. 2. The System Properties window opens. Y our W indows 98 version is listed under System. Enable PME Use this setting to adjust the power management compatibility of the adapter .
Although this is the safest setting, the best performance is achieved when the threshold parameter is as low as possible without pr oducing underruns. T o experiment, set the parameter to 16. Then, if performance drops significantly , increase the value in small incr ements.
requir es only one PCI transaction, the PCI bus is more efficient, but transmit time is slightly longer . When the option is disabled, the packets are not coalesced, and each packet requir es several PCI transactions. The PCI bus is less efficient, but transmit time is faster .
When traffic is prioritized at the host or entry point of the network, network devices can base forwarding decisions on priority information defined in the packet. Priority Packet prioritizes traffic on the basis of priority filters — parameters you assign to be applied to outgoing (transmit) packets.
W ake on LAN The W ake on LAN (WOL) feature operates accor ding to a published specification. In simple terms, the specification enables designers to build network adapters that are capable of “ listening ” to network activity even when the computer is turned off.
3. On the Adapters tab, select the adapter you want to be on a VLAN. 4. Click Properties. 5. In PROSet, click Join VLAN. 6. T ype the VLAN ID and the VLAN Name. Note: The VLAN ID must match the VLAN ID on the switch. The V alid ID range is from 0 – 4095.
Configuration Setup The Boot Agent software provides configuration options that allow you to customize the behavior of the Boot Agent software. Changing the Boot Agent configuration will usually be requir ed only the first time you add a new network adapter to a client computer within your network.
1-16 Intel ® PRO/100 SP Mobile Combo Adapter: User ’ s Guide.
Appendix A. T roubleshooting This section contains information on troubleshooting for the network adapter and modem. T roubleshooting network adapter The following table describes troubleshooting for the network adapter . Problem Action The Combo card can ’ t connect to the Network.
T roubleshooting modem The following table describes troubleshooting the modem. Problem Action Y our modem does not work properly after you install the device driver . Check the following: v The cable is connected to the modem card corr ectly . v Y ou selected Intel PRO/100 SP Mobile Combo Adapter application setting.
Appendix B. Modem function This section describes information about general modem hardwar e function, A T command summary , and A T commands reference S-r egisters. For additional information, refer to Lucent T echnologies, Host-Based Controller Modem A T Command Set, V ersion 1.
T able 3: Supported Functions Separate Homologation Country parameters in binary file [Except OS/2] CLKRUN# support. CLKRUN# should not be asserted if no data transaction for modem (or LAN) NT 4.
T able 4: A T Command Set Summary . The following table is from Lucent T echnologies, Host-Based Controller Modem A T Command Set, V ersion 1.1, June 15, 1998.
T able 5: The S-Register Summary . The S-registers 42 and 43 are for testing and debugging purposes only . Register Default Description S10 20 Automatic disconnect delay S1 1 95 DTMF dialing speed S12 50 Escape guard time S14 8 General bit-mapped options status S21 48 V .
T o modify the value of an S-register: TYPE: A TS n = r where n is the r egister number , and r is the new r egister value. PRESS: Enter S0 Auto Answer Ring Number This register determines the number of rings the modem will count befor e automatically answering a call.
S3 Command Line T ermination Character (user defined) This register determines the ASCII values as the carriage return character . This character is used to end command lines and result codes. Range: 0-127, ASCII decimal Default: 13 (carriage return) Units: ASCII Note: This register value is not stor ed with &W command.
S6 W ait Before Dialing This register sets the length of time, in seconds, that the modem must wait (pause) after going off-hook befor e dialing the first digit of the telephone number . The modem always pauses for a minimum of two seconds, even if the value of S6 is less that two seconds.
Units: seconds S10 Automatic Disconnect Delay This register sets the length of time, in tenths of a second, that the modem waits before hanging up after a loss of carrier . This allows for a temporary carrier loss without causing the local modem to disconnect.
0 = Numeric (V0) 1 = V erbose (Vl) (Default) Bit 6 Pulse dial PPS selection (&Pn) 0 = 10 PPS (&p0, &p1) (Default) 1 = 20 PPS (&p2) Default: 8 (00001000b) S21 V .24/General Bit Mapped Options Status Indicates the status of command options.
5 = X2 selected 6 = X3 selected 7 = X4 selected (Default) Bit 7 Pulse dial make/break ratio (&Pn) 0 = 33/67 make/break ratio (&P1, &P2) (Default) 1 = 39/61 make/break ratio (&P0) Defau.
Range: 0-255 Default: 0 S32 Synthetic Ring V olume This register specifies a synthetic ring volume. Range: 0-255 (allowed, but not meaningful) Default: 10 S33 Synthetic Ring Frequency This register specifies a synthetic ring fr equency . There are five choices, with 0 meaning disabled.
S 3 7=4r eserved S37 = 5 1200 bit/s S37 = 6 2400 bit/s S37 = 7 4800 bit/s S37 = 8 7200 bit/s S37 = 9 9600 bit/s S37 = 10 12000 bit/s S37 = 1 1 14400 bit/s S37 = 12 16800 bit/s S37 = 13 19200 bit/s S37.
S38=3 34 kbit/s S38=4 36 kbit/s S38=5 38 kbit/s S38=6 40 kbit/s S38=7 42 kbit/s S38=8 44 kbit/s S38=9 46 kbit/s S38=10 48 kbit/s S38=1 1 50 kbit/s S38=12 52 kbit/s S38=13 54 kbit/s S38=14 56 kbit/s Th.
One special value of S38, S38 = 251, is used for back-to-back (factory) testing of V .34 rates, with DSP code r unning in external memory . Set S38=251 on both originating and answering modems. (This feature is not valid with ramless solution.) S42 Auto Rate (default 1, range 0-1) This command is used for testing and debugging only .
T able 7: S36 and S48 Configuration Settings S48 = 7 S48 = 128 S36 = 1, 3 LAPM or async async S36 = 4, 6 LAPM, MNP , or hangup MNP or hangup S36 = 5, 7 LAPM, MNP , or async MNP or async S89 T imer to .
S108=33 A-law S108=7 default, or any other value: Coding as specified by digital modem in V .8bis information. If an old server does not tell its code type in V .8bis, then the client modem chooses based on its country ID. m-law regions ar e Japan, T aiwan, Korea, Hong Kong, North America, and Latin America.
Appendix C. Specifications This section provides information about the Adapter and LAN specifications. Adapter specifications T able 8: Specifications Feature V alue Power requir ements 300mA @ =5Vdc (1.
T able 9: Specifications Feature V alue Diagnostic Software On-board PROSet Responder Duplex mode Full duplex / Half duplex C-2 Intel ® PRO/100 SP Mobile Combo Adapter: User ’ s Guide.
Appendix D. Help and service information This section contains information on how to obtain online and telephone technical support. Online technical support Online technical support is available during the life of your product. Online assistance can be obtained through the Personal Computing Support W eb site and the IBM Automated Fax System.
For the support telephone number and support hours by country , refer to the following table or to the enclosed technical support insert. If the number is not provided, contact your IBM r eseller or IBM marketing representative. Response time may vary depending on the number and nature of the calls r eceived.
Appendix E. Product warranty and notices This section contains produce warranty information and notices. and W arranty Statements The warranty statements consist of two parts: Part 1 and Part 2. Part 1 varies by country . Part 2 is the same for both statements.
During the warranty period IBM or your reseller , if approved by IBM to provide warranty service, will pr ovide repair and exchange service for the Machine, without charge, under the type of service designated for the Machine and will manage and install engineering changes that apply to the Machine.
T o obtain warranty service for the Machine, contact your reseller or IBM. In the United States, call IBM at 1-800-772-2227. In Canada, call IBM at 1-800-565-3344.
IBM is responsible for loss of, or damage to, your Machine while it is 1) in IBM ’ s possession or 2) in transit in those cases where IBM is r esponsible for the transportation charges.
IBM Statement of W arranty Worldwide except Canada, Puerto Rico, T urkey , United States (Part 1 - General T erms) This Statement of Warranty includes Part 1 - General T erms and Part 2 - Country-unique T erms. The terms of Part 2 may replace or modify those of Part 1.
THESE W ARRANTIES ARE YOUR EXCLUSIVE W ARRANTIES AND REPLACE ALL OTHER W ARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED W ARRANTIES OR CONDITIONS OF MERCHANT ABILITY AND FITNESS FOR A P AR TICULAR PURPOSE.
serial-numbered Machine and 2) at an engineering-change level compatible with the feature, conversion, or upgrade. Many featur es, conversions, or upgrades involve the removal of parts and their r eturn to IBM. A part that replaces a r emoved part will assume the warranty service status of the removed part.
1. damages for bodily injury (including death) and damage to real pr operty and tangible personal property; and 2. the amount of any other actual direct damages, up to the gr eater of U.S. $100,000 (or equivalent in local currency) or the char ges (if recurring, 12 months ’ charges apply) for the Machine that is the subject of the claim.
PEOPLE ’ S REPUBLIC OF CHINA: Governing Law: The following is added to this Statement: The laws of the State of New Y ork govern this Statement. INDIA: Limitation of Liability: The following replaces items 1 and 2 of this Section: 1.
Y ugoslav Republic of Macedonia (FYROM), Moldova, Poland, Romania, Russia, Slovak Republic, Slovenia, or Ukraine, you may obtain warranty service for that Machine in any of those countries from either (1) an IBM r eseller approved to perform warranty service or (2) fr om IBM.
Production Status: The following paragraph replaces this Section: Each Machine is newly manufactured. It may incorporate in addition to new parts, re-used parts as well.
The following replaces the second paragraph of this Section: Unless otherwise provided by mandatory law , IBM and your reseller are not liable for any of the following: (items 1 and 2 unchanged) 3) indirect damages, even if IBM or your reseller is informed of their possibility .
IBM may not offer the pr oducts, services, or features discussed in this document in other countries. Consult your local IBM repr esentative for information on the products and services curr ently available in your area.
will be the same on generally available systems. Furthermore, some measurements may have been estimated thr ough extrapolation. Actual r esults may vary .
IBM authorized dealers. IBM is not responsible for any radio or television interference caused by using other than r ecommended cables and connectors or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user ’ s authority to operate the equipment.
IBM can not accept responsibility for any failur e to satisfy the protection requir ements resulting from a non-r ecommended modification of the product, including the fitting of non-IBM option cards.
Questo prodotto è conforme alle normative di pr otezione ai sensi della Direttiva del Consiglio dell ’ Unione Eur opea 89/336/CEE sull ’ armonizzazione legislativa degli stati membri in materia di compatibilit à elettromagnetica.
to your line, as determined by the REN, you should call your local telephone company to determine the maximum REN for your calling area. 3. If the device causes harm to the telephone network, the telephone company may discontinue your service temporarily .
Users should ensure for their own pr otection that the electrical ground connections of the power utility , telephone lines, and internal metallic water pipe system, if present, ar e connected together . This pr ecaution may be particularly important in rural areas.
AV I S : L ’ indice d ’é quivalence de la sonnerie (IES) assign éà chaque dispositif terminal indique le nombre maximal de terminaux qui peuvent ê tr e raccord é s à une interface.
Network Compatibility Declaration This equipment is intended for connection to the Public Switched T elephone Network, and supports both DTMF signalling and pulse dialing for the network addressing.
T elepermitted equipment of a differ ent make or model, nor does it imply that any product is compatible with all of T el ecom ’ s network services. Some parameters requir ed for compliance with T elecom ’ s T elepermit requir ements are dependent on the equipment (PC) associated with this device.
Appendix F . User notices v This card is intended for use with UL1950/EN60950/IEC60950 (or other NTRL) listed ITE computers that contain a Mini PCI type 3A connector . v Care should be taken to avoid damaging the insulation tape on the Xir com Mini PCI Modem 56 + 10/100 Ethernet card.
F-2 Intel ® PRO/100 SP Mobile Combo Adapter: User ’ s Guide.
.
Part Number: 06P3814 Printed in the United States of America on recycled paper containing 10% recovered post-consumer fiber . (1P) P/N: 06P3814.
Ein wichtiger Punkt beim Kauf des Geräts IBM PRO/100 SP (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie IBM PRO/100 SP noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für IBM PRO/100 SP - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von IBM PRO/100 SP reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über IBM PRO/100 SP erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon IBM PRO/100 SP besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von IBM PRO/100 SP verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit IBM PRO/100 SP. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei IBM PRO/100 SP gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
