Benutzeranleitung / Produktwartung DM-20 des Produzenten IBM
Zur Seite of 62
1 VOICE & MUSIC DM-20 DM-10 Thank you for purchasing an Olympus Digital V oice Recorder . Please read these instructions for information about using the product correctly and safely . Keep the instructions handy for future reference. T o ensure successful recordings, we recommend that you test the record function and volume before use.
2 T able of Contents T able of Contents ....................................... 2 Safe and Proper Usage ............................. 4 General Precautions .................................. 4 1 Getting Started Main Features ..........................
3 1 2 3 4 5 6 7 6 Using the Recorder as a Reader / Writer Using the Recorder as a Reader/Writer .................................... 55 7 Other Information Alarm Message List ................................. 56 T roubleshooting ......................
4 Safe and Proper Usage Before using your new recorder , read this manual carefully to ensure that you know how to operate it safely and correctly . Keep this manual in an easily accessible location for future reference. • The warning symbols indicate important safety related information.
5 Batteries W arning • Batteries should never be exposed to flame, heated, short-circuited or disassembled. • Do not attempt to recharge alkaline, lithium or any other non-rechargeable batteries. • Never use any battery with a torn or cracked outer cover .
6 1 Main Features ● Dual function recorder as a Digital V oice Recorder and a Digital Music Player ( ☞ P .18,40). ● Includes the Olympus DSS Player software and Windows Media Player ( ☞ P .14). ● Includes a dual function Remote Controller and Microphone ( ☞ P .
7 1 Main features of the Digital Music Player ● Can play back music files in MP3 and WMA format. Playback time* 5 DM-20 (128 MB) : 100 to 340 minutes DM-10 (64 MB) : 50 to 170 minutes ● Has built-in WOW ( ☞ P .48). ● Y ou can change the playback equalizer settings.
8 1 Identification of Parts 1 EAR/MIC/REMOTE jack 2 Built-in microphone 3 Record/Play indicator lamp 4 REC (Record) button 5 STOP button 6 PLA Y button 7 FF (Fast Forward) button 8 REW (Rewind) button.
9 1 Identification of Parts 1 Battery indicator 2 VCV A (V ariable Control V oice Actuator) indicator 3 WOW indicator 4 Alarm indicator 5 Microphone sensitivity display 6 Record mode indicator 7 Erase.
10 1 Inserting Batteries 1 Lightly press down on the arrow and slide the battery cover open. 2 Insert two AAA alkaline batteries, observing the correct polarity . 3 Close the battery cover completely . Replacing batteries The battery indicator on the display changes as the batteries lose power .
11 1 Using the AC Adapter/Switching Between the V oice Recorder and Music Player Switching Between the V oice Recorder and Music Player This device can be used as a voice recorder or as a music player . Using the mode switch, choose between VOICE or MUSIC option.
12 1 Setting T ime/Date (TIME&DA TE) PLA Y button STOP button (Exits the menu) STOP button FF/REW button FF/REW button (alters a choice) MENU button (switching the data displayed) PLA Y button (ac.
13 1 Example: March 14, 2003 3M 14D 2003Y (Initial setting) ↓ 14D 3M 2003Y ↓ 2003Y 3M 14D 4 Set the month. 1 Press the FF button or REW button to set the month. 2 Press the PLA Y button to accept t h e month. Changing the Time/Date 5 Set the date.
14 1 Installing Software Before you connect the recorder to your PC and use it, you must first install the utility software from the included Software CD.
15 1 1 Insert OL YMPUS V oice & Music DM Series Utility Software into the CD- ROM drive. The installation program will start automatically . Once the program starts, jump to step 4. If it does not, follow the procedures in steps 2 and 3. 2 Click the [Start] button and select [Run].
16 1 Installing Software Note T o change the program menu folder or installation folder , click [Back]. 11 Copy files. W ait until DSS Player is installed on your PC, then click [Finish].
17 1 Macintosh 1 Insert OL YMPUS V oice & Music DM Series Utility Software into the CD- ROM drive. 2 Double-click CD icon. Double-click the desired language to select it.
18 2 Recording When Using the Recorder as a V oice Recorder The recorder provides five folders, A, B, C, D and E, and each message recorded in a folder is saved as a Digital Speech Standard (DSS) file or a Windows Media Audio (WMA) file.
19 2 Recording functions Pause Recording Pause Press the REC button while recording. ➥ “ REC P AUSE ” will flash on the display . Resume Recording Press the REC button again. ➥ Recording will resume at the point of interruption. Note The recorder will time out after 10 minutes when left in “ REC P AUSE ” .
20 2 Using the V ariable Control V oice Actuator (VCV A) When the microphone senses that sounds have reached a preset threshold volume level, the built-in V ariable Control V oice Actuator (VCV A) starts recording automatically , and stops when the volume drops below the threshold level.
21 2 7 Press the REC button to start recording. When the sound volume is lower than the preset threshold sound level, recording automatically stops after 1 sec approximately , recording automatically pauses after approximately 1 second, and “ ST ANDBY ” flashes on the display .
22 2 T o enhance sound quality during recording, use the Remote Controller Microphone or an optional external microphone. If a stereo microphone is used, recording in SHQ (Stereo High-Quality) mode is possible. Please note, when a microphone is connected to the jack on the recorder , the jack functional switch-over is made automatically .
23 2 Y ou can select from among three recording modes: HQ (High Quality) mode, SP (Standard Playback) mode and LP (Long Playback) mode. If an optional stereo microphone is used, the only possible recording mode is SHQ (Stereo High Quality). Recording Modes (REC MODE) 1 Press and hold the MENU button for 1 second or longer .
24 2 Microphone sensitivity is adjustable to meet recording needs. Microphone Sensitivity (MIC SENSE) 1 Press and hold the MENU button for 1 second or longer . The menu opens ( ☞ P .31). 2 Press the FF or REW button until “ MIC SENSE ” flashes on the display .
25 2 Playing 1 Press the FOLDER button to choose folder . 2 Press the FF or REW button to choose the file that you want to play . If you keep pressing the FF or REW button in stop mode, the recorder continuously skips to the beginnings of files. 3 Press the PLA Y button to start playback.
26 2 Playing *1: As in normal playback, operations such as playback stop, file cueing, and index mark ( ☞ P .30) insertion are possible in fast playback and slow playback. *2: If you keep pressing the FF or REW button in stop mode, the recorder continuously skips to the beginnings of files (F .
27 2 This function enables repeated playback of part of the file being played. If the continuous playback function is used together , two or more files can be repeatedly replayed as long as they are in the same folder . Repeat Playback 1 Choose the file for Repeat Playback, and press the PLA Y button.
28 2 4 4 4 Press the STOP button. Repeat Playback is cancelled. Y ou can use Fast Playback and Slow Playback functions, insert and delete index marks, and use the Noise Cancel function. Repeat Playback .................................................
29 2 If recorded audio is difficult to understand because of noise, adjust the Noise Cancel setting level. Noise will be reduced in the file when its played back for better sound quality . Noise Cancel Function 1 Press and hold the MENU button for 1 second or longer while the file is playing.
30 2 Index Marks Index marks can be placed in a file during recording or playback to provide and quick and easy way of keeping track of important sections in the file. Setting an Index Mark 1 Press the INDEX button during recording or playback to set an index mark.
31 2 REC MODE MIC SENSE LOCK BACK SP ACE ALL PLA Y TIME&D A TE FORMA T CONTRAST BEEP BACKLIGHT COMMENT FOLDER NAME ALARM VCV A EXT .INPUT Menu List (VOICE mode) Selection from HQ, SP and LP modes. Notes • Part of the menu is common with the MUSIC mode.
32 3 Using DSS Player Software Using DSS Player Software Managing Files on Y our PC The DSS Player Software can be used to do the following: • Playback voice files on your PC and on the recorder when connected via USB. Download files from the recorder to the PC or upload files from the PC to the recorder .
33 3 Using Online Help T o open Online Help, you have the following options. (Windows) • Click the [Start] button, select [All Programs], then [Olympus DSS Player 2002], then click [Help]. • While DSS Player is running, choose [Contents] from the [Help] menu.
34 3 Connecting to Y our PC Connecting to your PC using the USB cable 1 Release the HOLD switch. 2 Insert end A of the USB cable to your PC's USB port or USB hub. 3 Confirm that the recorder is not in use before attaching end b of the USB cable to the terminal port of the recorder .
35 3 Connecting to Y our PC 1 Confirm that the record/play indicator lamp on the recorder is not flashing. Right- click the Removable Disk icon in My Computer and select [Eject]. 2 Disconnect the USB cable. Windows Disconnecting from Y our PC 1 Click the on the task bar located at the lower-right corner of the screen.
36 3 Connecting to Y our PC ................................................................................................................................................................. Notes • NEVER disconnect the USB cable while the record/play indicator lamp is flashing.
37 3 Connecting to Y our PC 2 While pushing down the top of the recorder , set the recorder on the cradle. In this case, make sure that concavity on the rear of the recorder fits convexity of the cradle. “ REMOTE ” is displayed on recorder if the USB cable is connected.
38 3 Running DSS Player Running DSS Player By connecting the recorder to your PC, you can automatically start the application. Disabling automatic start 1 Right click the icon in the System T ray in the lower right-hand corner of the screen, then click Select startup application.
39 3 Running DSS Player T o start, open the “ DSS Player for Mac ” folder created upon installation and double-click the icon. ........................................................................................................................
40 4 Using the Recorder as a Music Player Using the Recorder as a Music Player The recorder supports music files in MP3 and WMA formats, which can be transferred from the PC to the corresponding music folder of the recorder .
41 4 Using Windows Media Player Windows Media Audio License and Distribution Agreement • Y ou have acquired an item ( “ DM-20/10 ” ) that includes software licensed by OL YMPUS from Microsoft Licensing Inc.
42 4 Window Names (W indows Media Player) Window Names (Windows Media Player) 1 2 9 7 8 34 5 6 ! 0 1 Features taskbar 2 Quick Access box 3 Play button 4 Stop button 5 Previous button 6 Next button 7 S.
43 4 Copying Music from CD 1 Insert CD into the CD-ROM drive and start Windows Media Player . 2 From the Features taskbar , click the [Copy from CD] menu. 3 Click [Find Album Info] of Quick Access box. If Internet connectivity is available, CD information is searched.
44 4 T ransferring Music File to the Recorder T ransferring Music File to the Recorder 1 Connect the recorder to a PC and start Windows Media Player . 2 From Features taskbar , click [Copy to CD or Drive]. 3 Select the play list to be transferred to the recorder and put the check marks on the music file that you want to transfer .
45 4 Music Playback Music Playback The recorder has 2 music folders; music A and music B, to store music files transferred from a PC. 2 folders can be conveniently used depending on the genre of music files. 1 Insert the stereo earphone or remote controller into the jack on the recorder .
46 4 Music Playback Music Playback Notes • The proper bit rate for playback on the recorder are 32 kbps to 160 kbps for both the MP3 and WMA format. • It is possible to play back files with different bit rates (converting the bit rate within one file); however , the displayed time may not be accurate.
47 4 V arious Playback Features Equalizer The equalizer mode is selected in the following order each time the EQ (equalizer) button is pressed. → FLA T → ROCK → POP → JAZZ → USER Y ou can set/create your own equalizer preferences using the user equalizer (USER EQ) function.
48 4 Increasing the WOW effect (WOW EFFECT) The recorder has WOW , an audio processing technology that increases sound clarity and bass quality . The level of the surround effect (SRS 3D) and the bass effect (T ruBass) may be individually adjusted through three levels of processing or turned off.
49 4 5 Press the FF or REW button to select the bass effect level. The levels switch in the following rotation, “ OFF ” “ LOW ” “ MIDDLE ” “ HIGH ” . 6 Press the PLA Y button to save your setting. 7 Press the STOP button to close the menu.
50 4 Menu List (MUSIC mode) Menu List (MUSIC mode) WOW EFFECT USER EQ LOCK TIME&DA TE FORMA T CONTRAST BEEP BACKLIGHT FOLDER NAME ALARM Set the surround effect and bass effect ( ☞ P .48). Notes • Part of the menu is common with the VOICE mode.
51 5 Erasing Features Common to the V oice Recorder and Music Player Erasing One File at a T ime A selected file can be erased from a folder . Erasing 1 Press the FOLDER button to choose a folder . 2 Press the FF or REW button to choose the file you want to erase.
52 5 Erasing Erasing Erase All Files from a Folder All files in a folder can be erased simultaneously , except for locked files. 1 Press the FOLDER button to choose the folder you want to erase all files. a Folder from which to erase files 2 Press the ERASE button for 3 seconds or longer .
53 5 Erasing Notes • An erased file cannot be restored. • If the ERASE button is not pressed within the 8 seconds after “ FILE ERASE? ” or “ ALL ERASE? ” starts flashing, the recorder will revert to stop status. • Completion of erasing may take 10 seconds.
54 5 Hold Hold Setting the HOLD switch to the HOLD position. If you set the recorder to HOLD status by sliding the HOLD switch in the direction of the arrow , the current conditions will be preserved, and all buttons and switches except the HOLD switch will be disabled.
55 6 Using the Recorder as a Reader/Writer Using the Recorder as a Reader/W riter With the recorder connected to your PC, you can download data from the memory to your PC and upload data stored on your PC to the memory . • Y ou will need to install the Olympus DSS Player Software if you are using Windows 98/ 98SE.
56 7 Alarm Message List Alarm Message List Explanation Battery power is getting low . T ried to delete a locked file. The file is full of index marks (maximum of 16 marks). T ried to incorporate WMA file index marks into the music files or the files not recorded with the recorder .
57 7 Explanation No files were found in the folder . There was an error while formatting the recorder's memory . T ried to create or store a file that has same name as a file in the folder . System error detected in the recorder . Message NO FILE FORMA T ERROR SAME FILE SYSTEM ERROR Action Select another folder .
58 7 T roubleshooting T roubleshooting Probable cause The batteries are not loaded properly . The batteries are dead. The recorder is in HOLD mode. The recorder is in HOLD mode. The batteries are dead. Low remaining internal flash memory . The maximum number of files has been reached.
59 7 Accessories (optional) /Specifications Accessories (optional) Stereo Microphone: ME50S T o create stereo recodings in WMA format with clear sound and reduced noise. Noise-Cancellation microphone: ME12 (Dictation microphone) Used to get crisp recordings of your own voice by reducing the effects of ambient noise.
60 7 Specifications For the Digital Music Player Compatible data format WMA, MP3 format Sampling frequency 44.1 kHz Frequency band 20 to 20,000 Hz Playback time DM-20 (128 MB) 100 to 340 minutes DM-10 (64 MB) 50 to 170 minutes (T ime may vary depending on the bit rate of the music data.
61 7 T echnical Assistance And Support T echnical Assistance And Support The following are contact information for technical support for Olympus recorders and software only . ◆ T echnical Hotline Number in the U.S. and Canada 1-888-553-4448 ◆ User Support E-mail address in the U.
63 7.
Ein wichtiger Punkt beim Kauf des Geräts IBM DM-20 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie IBM DM-20 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für IBM DM-20 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von IBM DM-20 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über IBM DM-20 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon IBM DM-20 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von IBM DM-20 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit IBM DM-20. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei IBM DM-20 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
