Benutzeranleitung / Produktwartung CI5VGM Series des Produzenten IBM
Zur Seite of 134
CI5VGM Series Full-Size Pentium All-in-one CPU Card Version 1.0A Industrial CPU Card PC-Based Computer Boards for Industrial Automation User’s Manu al.
ii CI5VGM User’s Manual Copy right Notice This publication is protected by copy rig h t an d all rig h ts are res erv ed. No part of it m ay be reproduced or transmitted by an y m eans or in an y form , with out prior consent of the original m anuf acturer.
Contents CI5VGM User’s Manual iii Contents Chapter 1 Introduction............................................. 1 Checklist ..................................................................... 3 Description ..........................................
.
Chapter 1 I ntroduction CI5VGM User’s Ma n u al 1 Below are addi ti onal i nf ormat ion f or LCD Panel Type Select and settings f or newer CP Us SW3: LCD Panel Ty pe Select 1 2 3 4 TFT LCD Panel ON .
Chapter 1 I ntroduction 2 CI5VG M User ’s Manual 1 Introduction This manual is designed to give y ou information on th e CI5VGM CPU card. It is divided into the following sections: Checklis t .........................................................
Chapter 1 I ntroduction CI5VGM User’s Ma n u al 3 Check list Please check that y our package is com plete and contains the item s below . If y o u discover damag ed or missin g item s, please cont act your dealer.
Chapter 1 I ntroduction 4 CI5VG M User ’s Manual Features • • • • Socket 7, CPU Speed 90~550MHz • • • • Bus Speed 60/ 66/75/83/95/100MHz • • • • VI A MV P 3 AG P se t • •.
Chapter 1 I ntroduction CI5VGM User’s Ma n u al 5 • • • • Memory Sockets : Three 168-pin D IMM sockets Memory types: SDR AM (Sy nchronous DR AM) DI MMs: EDO DRAM or SDRA M (Synch ronous DRAM.
Chapter 1 I ntroduction 6 CI5VG M User ’s Manual • • • • Onboa rd Audio (o pt ional): T he onboard audi o consis ts of a YAMA HA YMF715-S (OPL3- SA3) s ingl e audio chi p that integrates OPL.
Chapter 1 I ntroduction CI5VGM User’s Ma n u al 7 Intelligence • • • • Temp erature Mo nitoring and Alert : A sensor for the CPU temperature on the CI5VGM monitors th e CPU temperature an d alerts the user through the sp eaker or b uzzer when temperature exceeds the s afe heat level.
Chapter 1 I ntroduction 8 CI5VG M User ’s Manual Board Dimensions.
Chapter 1 I ntroduction CI5VGM User’s Ma n u al 9 This page is intentionally left blank ..
Chapter 2 I nstallations 10 CI5VGM U ser’ s Manual 2 Installations This chapter provides inform ation on how to use the jumpers an d connectors on the C I5VGM in order to set up a w orkable syst em. The topics covered are: CPU Installation..........
Chapter 2 I nstallations CI5VGM U ser’ s Manual 11 CPU Inst all atio n The CI5VGM Indu strial CPU Ca rd support s a ZIF proces sor socket f or Pentium- level processors. Unlike PGA sockets , ZIF (Z ero Insertion Force) s ockets come w ith a lever to secure the processor.
Chapter 2 I nstallations 12 CI5VGM U ser’ s Manual Mem ory Installation The CI5VGM In dustrial CPU Card su pports three 168- pin DIMM sockets for a m axim um tota l me mory of 384MB. The mem ory modu les can com e in s izes of 16MB, 32MB, 64MB, 128MB i n EDO DR AM or SDRAM ty pe.
Chapter 2 I nstallations CI5VGM U ser’ s Manual 13 168Pin DIMM (3.3V) - SDRAM or EDO DRAM (continued) (DIMM 3 ) (DIMM 2 ) (DIMM1) Total M emory 16MB 16MB 16MB 48MB 32MB 16MB 16MB 64MB 64MB 16MB 16MB.
Chapter 2 I nstallations 14 CI5VGM U ser’ s Manual Jumpers on the C I5VGM The jumpers on the CI5VGM allow s you to conf igure y our CPU card according to th e needs of y our applications . If y ou hav e doubts about the best jum p er configuration f or your n eeds, contact y our dealer or sales representative.
Chapter 2 I nstallations CI5VGM U ser’ s Manual 15 Jumper Locations on the CI5VGM.
Chapter 2 I nstallations 16 CI5VGM U ser’ s Manual SW1(1-8): CPU Frequency Selector For Intel Pentium , IDT WinChip 2- 3D / C6 SW1 CPU Cloc k AGP Cloc k M ultiplier CPU FREQ. o n o n o n o ff o ff o ff o ff o n 60MHz 60MHz 1.5x P54C-90 o ff o n o n o ff o ff o ff o ff o n 66MHz 66MH z 1.
Chapter 2 I nstallations CI5VGM U ser’ s Manual 17 For Cyrix 6x86, 6x86L, 6x86MX. MII CPU SW1 CPU Clock AGP Clock Multiplier CPU FREQ. o ff o n o n o ff o n o ff off o n 66MHz 66MHz 2x P166+ (133MHz) o ff o ff o n o ff on o ff o ff o n 75MHz 75MHz 2x P200+ (150MHz) of f on on of f on on of f on 66MHz 66MHz 2.
Chapter 2 I nstallations 18 CI5VGM U ser’ s Manual For AMD K5, K6, K6 -2 CPU SW1 CPU Cloc k AGP Cloc k M ultiplier CPU FREQ. on on on off off off of f on 60MHz 60MHz 1.5x PR90 off on o n off off off off o n 66MHz 66MHz 1.5x PR100 off on on off on off of f on 66MHz 66MHz 2x PR133 off on on off on on off on 66MHz 66MHz 2.
Chapter 2 I nstallations CI5VGM U ser’ s Manual 19 off off off on on of f on off 100MHz 66MHz 4x K6-2/400 off off off on on on on off 100MHz 66MHz 4.
Chapter 2 I nstallations 20 CI5VGM U ser’ s Manual For Dual Voltage CPU: Intel P55C, Cy rix 6x86L/ MX/MII, A MD K6/K6- 2, IDT WinC hip 2-3D SW2 V IO V CORE CPU o ff o ff o n o n 3.3V 3.2V K6-233 (0.35 µ ) on on off on 3.3V 3.1V o ff o n o ff o n 3.
Chapter 2 I nstallations CI5VGM U ser’ s Manual 21 For Dual V oltage CPU: Intel P55C, Cy rix 6x86L/MX /MII , AMD K 6/K6-2 SW2 V IO V CORE CPU o ff o n o ff o ff 3.3V 2.2V K6, K6-2 (0.25 µ ) o n o ff o ff o ff 3.3V 2.1V o ff o ff o ff o ff 3.3V 2.0V JP3: LCD Power Setting The CI5VGM XGA interf ace supports 5V and 3.
Chapter 2 I nstallations 22 CI5VGM U ser’ s Manual JP6: D iskOnChip BIOS Expansion Address Sele ct JP6 Address JP6 Address 1 2 3 D0000-D7FFF 1 2 3 D8000-DFFFF (default) J11: RS232/422/485 (COM2) Selection COM1 is fixe d for RS- 232 use only . COM2 is s electable for RS232, R S-422 an d RS-485.
Chapter 2 I nstallations CI5VGM U ser’ s Manual 23 J24: Clear CMOS Content J24 Setting Function 1 2 3 Pin 2- 3 Short/Closed Clear CMOS Content 1 2 3 Pin 1- 2 Short/Closed Normal Operation (default) .
Chapter 2 I nstallations 24 CI5VGM U ser’ s Manual Connectors on the CI5VGM The connectors on the CI5VGM allow s you to conn ect external devices such as key board, floppy disk driv es, hard dis k drives, print ers, etc. The followin g table lists the connectors on CI5VGM and their respective functio ns.
Chapter 2 I nstallations CI5VGM U ser’ s Manual 25 Connector Locations on the CI5VGM.
Chapter 2 I nstallations 26 CI5VGM U ser’ s Manual J1: Floppy Drive Connector J1 is a 34-pin h eader and w ill support up to 2.88MB floppy drives. Signal Nam e Pin # Pin # Sign al Nam e Groun d 1 2 .
Chapter 2 I nstallations CI5VGM U ser’ s Manual 27 IDE1, IDE2: EIDE Connectors IDE1: Prim ary IDE Connector Signal Nam e Pin # Pin # Sign al Nam e Reset IDE 1 2 Grou nd Host data 7 3 4 Host data 8 H.
Chapter 2 I nstallations 28 CI5VGM U ser’ s Manual J3: External ATX Power Connector Pin # Signal Nam e 1 Du al fu nction pow er button 2 GND 3 Du al fu nction pow er button 4 GND 5 PS-ON (s oft on/o.
Chapter 2 I nstallations CI5VGM U ser’ s Manual 29 J4: Audio I/O Connector (Continued) The J 4 Audio I/O Connector connec ts to the EXT V GM Audio Da ughter C ard with the 26-pin ribbon cable supplied w ith the packag e.
Chapter 2 I nstallations 30 CI5VGM U ser’ s Manual J6: COM1 Serial Port Pin # Signal Nam e 1 DCD, Data carrier detect 2 RXD, Receive data 3 TXD, T ransmit data 4 DTR, Data terminal ready 5 GND, grou.
Chapter 2 I nstallations CI5VGM U ser’ s Manual 31 J8: Front Bezel Connector The front bezel of th e case has a con trol panel w hich provides ligh t indication of the comput er activities and switches to chang e the computer status. J8 is a 20- pin header that prov ides interfaces for the f o llowing functio ns.
Chapter 2 I nstallations 32 CI5VGM U ser’ s Manual ATX Power O N Switch: P ins 7 and 17 This 2-pi n conn ector is an “A TX Power S upply On/Off Sw itch” on the sy stem th at connects to the pow er sw itch on the case. When pressed, the power sw itch will force th e system to p ower on.
Chapter 2 I nstallations CI5VGM U ser’ s Manual 33 J9: LCD Panel Connector J9 is a dual-in- line header for flat panel L CD displays . T he follow ing show s the pin assig nm ents of th is connector. Signal Nam e Pin # Pin # Sign al Nam e +12V 1 2 +12V GND 3 4 GND +5V/3.
Chapter 2 I nstallations 34 CI5VGM U ser’ s Manual J14: Chassis Fan Power Connector J14 is a 3-pin h eader for the chas sis f an. The fan m ust be a 12V fan . Pin # S ignal Nam e 1 Rotation 2 +12V 1 2 3 3 Groun d J22, J23: CPU Fan P ow er Connectors J22 and J23 are pin h eaders f or th e C PU fa n .
Chapter 2 I nstallations CI5VGM U ser’ s Manual 35 J17: External Mouse Connector Pin # Signal Nam e 1 Mouse data 2 Groun d 3 5V J17 4 Mouse Clock J19: PS/2 Keyboard Connector Pin # Signal Nam e 1 Key board data 2 N.C. 3 Groun d 4 5V 5 Key board clock J19 6 N.
Chapter 2 I nstallations 36 CI5VGM U ser’ s Manual J21: VGA CRT Connector Signal Nam e Pin # Pin # Signal Nam e Red 1 2 Green Blue 3 4 N.C. GND 5 6 GND GND 7 8 GND N.
Chapter 2 I nstallations CI5VGM U ser’ s Manual 37 Watchdog Timer Configuration The function of the w atchdog timer is to reset the system au tomatically and is def ined at I/O port 0443H. To enable t he w atchdog tim er and allow the s y stem to res et , w rite I/O port 0443H.
Chapter 3 BIOS Config ura tion 38 CI5VGM U ser’ s Manual This page was intentionally left blank..
Chapter 3 BIOS Config ura tio n CI5VGM U ser’ s Manual 39 3 BIOS Configuration This chapter describes the different settings av ailable in the Aw ard BIOS that comes w ith the CI5VGM CPU card. The topics covered in th is chapter are as follow s: BIOS Introduction.
Chapter 3 BIOS Config ura tion 40 CI5VGM U ser’ s Manual PCI/VGA Palette Snoop .......................................... 49 OS Select for DRA M > 64MB ................................ 49 HDD S.M.A.R.T. Capability ................................
Chapter 3 BIOS Config ura tio n CI5VGM U ser’ s Manual 41 Load BIOS Defau lts ........................................................... 59 Load Setup Def aults ........................................................... 59 Integrated Peripherals .
Chapter 3 BIOS Config ura tion 42 CI5VGM U ser’ s Manual BIOS Introduction The Award BIOS (Basic Input/Output System ) installed in your compu ter sy stem’ s ROM su pports Intel Penti um II processors in a standard IBM-A T compatible I/O sy stem.
Chapter 3 BIOS Config ura tio n CI5VGM U ser’ s Manual 43 ROM PCI/ISA BIOS CMO S SETUP UTILITY AW A RD S OFTW ARE, I NC. STA NDARD CMOS SETUP INTEGRATED PERIPHERAL S BIOS FEATURES SETU P SUPERVISOR .
Chapter 3 BIOS Config ura tion 44 CI5VGM U ser’ s Manual Standard CM OS Setup “Stan dard CMOS Setup” choice allow s you to record som e basic hardw are configurations in you r computer s ys tem an d set the sy stem clock and error h andling.
Chapter 3 BIOS Config ura tio n CI5VGM U ser’ s Manual 45 Time The time form at is: Ho ur : 00 to 23 M inu te : 00 to 59 Second : 00 to 59 To set the tim e, high light th e “Tim e” field an d use the <PgUp>/ <PgDn > or +/- key s to set the current tim e.
Chapter 3 BIOS Config ura tion 46 CI5VGM U ser’ s Manual NOTE : The specification s of your drive must match with the d rive table. The h ard disk will no t work prope rly if you enter incorrect information in these fields. If your hard d isk drive type is not matched or l iste d, you can use Type U ser to define your own dr ive type manually .
Chapter 3 BIOS Config ura tio n CI5VGM U ser’ s Manual 47 BIOS Feat ures Set up This section allow s you to configure and im prove y our system and allows you to set up som e sy stem features accordin g to y our preference. ROM / PCI ISA BIOS BIOS FEAT URES SETUP AW ARD SOFT W ARE, INC.
Chapter 3 BIOS Config ura tion 48 CI5VGM U ser’ s Manual Quick Power On Self Test When enabled, th is f i eld speeds u p th e Pow er On Self Test (POST) after the system is turned on. If it is set to Enabled , BIOS w ill skip some item s. Boot Sequence This field determ ines the drive that the system searches firs t for an operating sy stem.
Chapter 3 BIOS Config ura tio n CI5VGM U ser’ s Manual 49 Typem atic Rate Setting When disabled, continually hold ing down a key on your key board will generate only one instance. When enabled, you can set the tw o ty pematic controls listed next. By default, th is field is set to Dis abled.
Chapter 3 BIOS Config ura tion 50 CI5VGM U ser’ s Manual Video BIOS Shado w This item allow s you to chan ge the Video BIOS location from ROM to RAM. Video Shadow w ill increase the video speed. C8000 - CBFFF Shadow/DC000 - DFFFF Shad ow Shadow ing a ROM reduces the mem ory availabl e betw een 640KB to 1024KB.
Chapter 3 BIOS Config ura tio n CI5VGM U ser’ s Manual 51 Chipset F eatures Setup This Setup menu controls the configu ration of the moth erboard chipset.
Chapter 3 BIOS Config ura tion 52 CI5VGM U ser’ s Manual Video BIOS Cacheable When en abled, access to video BIOS addressed at C0000H to C7FFFH is cached, provided th at the cache controller is disabled.
Chapter 3 BIOS Config ura tio n CI5VGM U ser’ s Manual 53 USB Keybo ard Support The field en ables or dis ables th e support f or a USB key board. CPU Warning Tem perature This field sets th e threshold tem perature at which an alert is sounded through t he system’s speaker .
Chapter 3 BIOS Config ura tion 54 CI5VGM U ser’ s Manual Powe r Manage ment Setup The Power Mana gement Setup a llows you to sa ve ene rgy of your system effectively . It w ill shut down the hard disk an d turn off video display after a period of inactivity.
Chapter 3 BIOS Config ura tio n CI5VGM U ser’ s Manual 55 PM Co ntrol by APM Thi s field all ows you to use t he Advanc ed P ower Manage ment devi ce to enhan ce the Max. Pow er Savin g mode and stop th e CP U’s internal clock . If the Max. Power Sav ing is n ot enabled, this w ill be preset to NO.
Chapter 3 BIOS Config ura tion 56 CI5VGM U ser’ s Manual Suspend Mo de When enabled, and after th e set time of sy stem inactivity , all d evices except the CPU will be shut of f.
Chapter 3 BIOS Config ura tio n CI5VGM U ser’ s Manual 57 PNP/ PCI C on f ig ur ati o n This o ption co nfigures the PCI b u s system. All PCI bus systems on the system use INT# , thus all installed PCI cards must be set to this value. ROM PCI/ISA BIOS PNP/PCI CONFIGURATION AW ARD SOFT W ARE I NC.
Chapter 3 BIOS Config ura tion 58 CI5VGM U ser’ s Manual CPU to PCI Write Buffer When enabled, th is option increas es the eff iciency of the PCI bus to and speed up the execution in the processor. By default, this field is set to Enabled . PCI Dynam ic Bursting When enabled, th is option com bines several PCI cycles into one.
Chapter 3 BIOS Config ura tio n CI5VGM U ser’ s Manual 59 Load BIOS Defaults This optio n allows y ou to lo ad the troubleshooting defau lt values perman ently stored in the BIOS ROM. These default setting s are non-optim al and disable all high -performan ce features.
Chapter 3 BIOS Config ura tion 60 CI5VGM U ser’ s Manual Integrated Peripheral s Thi s o pti o n sets your hard disk c onfigur atio n, mode and p or t.
Chapter 3 BIOS Config ura tio n CI5VGM U ser’ s Manual 61 IDE Prim ary/Secondary Master/Slave UDM A The se fiel ds all ow your system to impro ve di sk I/O thro ughput to 33Mb/sec w ith the Ultra DMA/33 featu re.
Chapter 3 BIOS Config ura tion 62 CI5VGM U ser’ s Manual Supervis or / User Password These tw o options set t he sy stem pass word. Superv isor Pass word s ets a password that will b e u sed to pro tect th e system and Setup utility. User Password sets a password that w ill be used exclusiv ely on th e system .
Chapter 3 BIOS Config ura tio n CI5VGM U ser’ s Manual 63 IDE HDD Auto Detection This option detects th e paramet ers of an IDE hard di sk drive, an d automatically enters them into the Stan d ard CMOS Setup screen. ROM PCI/ISA BIOS STANDARD CMOS SETUP AW ARD SOFT W ARE, INC.
Chapter 3 BIOS Config ura tion 64 CI5VGM U ser’ s Manual Save & Exit Se tup This option allows you to determ ine wh ether or not to accept the modifications. If y ou ty pe “Y”, y ou w ill quit the setup utility and save all changes in to the CMOS mem o ry.
Chapter 4 Audio D river Installation Guide CI5VGM U ser’ s Manual 65 4 Audio Driver Installation Guide This chapter describes the audio driver installation proced ure for the onboard YA MAHA YMF715-S audio ch ip.
Chapter 4 Audio D river Installation Guide 66 CI5VGM U ser’ s Manual Installing the Audio Drivers for Windows 95 Step 1. After i nstal ling Window s 95, insert t he CD or au dio drivers floppy disk that comes w ith y our moth erboard in the CD-R OM or floppy disk drive (labeled YA MAHA Audio YMF715 Wi ndow s 95 Drivers ).
Chapter 4 Audio D river Installation Guide CI5VGM U ser’ s Manual 67 Step 3. W hen the f igure below appears , press the Next to search for the driver. Step 4. W hen the f igure below appears , click Other Locations …, then type d :soundya715w i n95 or a: and click OK .
Chapter 4 Audio D river Installation Guide 68 CI5VGM U ser’ s Manual Step 5. The Update Device Driver Wizard will fin d YAM AH A OPL3-SAx Sound System and show th e followin g figu re. Click Finish . Step 6. When the Opl3sa.drv on OPL3-SA x driver cou ld not be foun d , type the driver location as d:soundya715w in95 or a: as show n below.
Chapter 4 Audio D river Installation Guide CI5VGM U ser’ s Manual 69 Step 7. W hen f ile copyin g is done an d the fig ure below appears, insert the Windows 95 CD into the CD-R OM, and then click OK . Step 8. When the driver installation is fin ished, continue to install the YSTATI ON so ftware.
Chapter 4 Audio D river Installation Guide 70 CI5VGM U ser’ s Manual Step 9. W hen the f igure below appears , click Typic al , and then con tinue the installation by followin g Install Wizard. It is recomm e nded that the default settings assigned by th e Install Wizard be applied during the f irst time installation.
Chapter 4 Audio D river Installation Guide CI5VGM U ser’ s Manual 71 Setting the 3D Function Step 1. Click Start in the task bar, and then select Settings .
Chapter 4 Audio D river Installation Guide 72 CI5VGM U ser’ s Manual Step 2. Double click the OPL3-SAx Conf ig icon. Step 3. Move Ymersion slide bar to adjust th e 3D effects .
Chapter 4 Audio D river Installation Guide CI5VGM U ser’ s Manual 73 Using YAMAHA So ftwa re Waveta ble for Windows 95 The audio driver inclu des the YAMA HA Soft GM softw are. After finishin g the audio d river installation, y o u can use th is software to change some setting s for better MIDI sound quality.
Chapter 4 Audio D river Installation Guide 74 CI5VGM U ser’ s Manual Step 2. In the Control Panel w indow , double click th e Multimedia icon..
Chapter 4 Audio D river Installation Guide CI5VGM U ser’ s Manual 75 Step 3. W hen th e win dow below appears, choose th e MI DI tab. Three items are show n. These items are: • OPL3-SA FM Synthesizer Select OPL3 FM synthesize r . • OPL3-SA MPU401 Select Hardware Wavetable .
Chapter 4 Audio D river Installation Guide 76 CI5VGM U ser’ s Manual Installing the Audio Drivers for Windows NT 4.0 Step 1. Bef ore instal ling the audi o drivers f or Windows NT 4.0, you must f irst in stall the f ile pnpisa.inf . This file can be found in the Window s NT 4.
Chapter 5 VGA Driver Installation Guide CI5VGM U ser’ s Manual 77 5 VGA Driver Installation Guide This chapter describe the VGA driver installation procedure for the onboard Trident 9520/ 25. This chapter contains the follow ing sections: Instal ling Trident 9520/25 Drivers for Window s 95.
Chapter 5 VGA Driver Installation Guide 78 CI5VGM U ser’ s Manual Installing Trident 9520/25 Drivers for Windows 95 Step 1. In the Wi ndow s 95 screen , click Start .
Chapter 5 VGA Driver Installation Guide CI5VGM U ser’ s Manual 79 Step 2. Double click Displ ay , then click Settings ..
Chapter 5 VGA Driver Installation Guide 80 CI5VGM U ser’ s Manual Step 3. Click Advanced Properties , then click Change.....
Chapter 5 VGA Driver Installation Guide CI5VGM U ser’ s Manual 81 Step 4. Click Have Disk ... . If "D:" is your CDR OM, type D:VGAT rid9520W IN95 and click OK . If you ar e using the floppy disk label ed Tr ident 9520/25 VGA Driver W indows 95/98 , type A: an d click OK .
Chapter 5 VGA Driver Installation Guide 82 CI5VGM U ser’ s Manual Step 5. Select Trident Cyber 9520/25 PCI/AGP (VX .XX. XXXX.9 5) , then click OK ..
Chapter 5 VGA Driver Installation Guide CI5VGM U ser’ s Manual 83 Step 6. After th e files are copied, click Close . Step 7. Click Yes to restart your com puter and for the new settings to.
Chapter 5 VGA Driver Installation Guide 84 CI5VGM U ser’ s Manual Installing Trident 9520/25 Drivers for Windows 98 Step 1. Click Start . Select Settings , then click the Control Panel icon.
Chapter 5 VGA Driver Installation Guide CI5VGM U ser’ s Manual 85 Step 2. Double click Displa y ..
Chapter 5 VGA Driver Installation Guide 86 CI5VGM U ser’ s Manual Step 3. Click Settings ..
Chapter 5 VGA Driver Installation Guide CI5VGM U ser’ s Manual 87 Step 4. Click Adv anced ..
Chapter 5 VGA Driver Installation Guide 88 CI5VGM U ser’ s Manual Step 5. Click Adapter ..
Chapter 5 VGA Driver Installation Guide CI5VGM U ser’ s Manual 89 Step 6. Click Change... ..
Chapter 5 VGA Driver Installation Guide 90 CI5VGM U ser’ s Manual Step 7. Click Nex t . Step 8. Select Display a list of all the driv ers in a specific location, so you can select the driver y ou want.
Chapter 5 VGA Driver Installation Guide CI5VGM U ser’ s Manual 91 Step 9. Click Have Disk ... . Step 10 . I f "D :" is your CD ROM, type D:VGATrid9520WIN98 , If you are usin g the floppy disk labeled Tr ident 9520/25 VGA Dr iver W indows 95/98 , ty pe A: and click OK .
Chapter 5 VGA Driver Installation Guide 92 CI5VGM U ser’ s Manual Step 11. Select Trident Cy ber 9520/25 PCI/AGP(vx .xx . xxxx. 98 ) , then click OK .
Chapter 5 VGA Driver Installation Guide CI5VGM U ser’ s Manual 93 Step 13. After th e files are copied, click Finish ..
Chapter 5 VGA Driver Installation Guide 94 CI5VGM U ser’ s Manual Step 12. Cli ck Close ..
Chapter 5 VGA Driver Installation Guide CI5VGM U ser’ s Manual 95 Step 13. Cli ck Close . Step 14. Click Yes to restart your computer and f or the new settings to take eff ect.
Chapter 5 VGA Driver Installation Guide 96 CI5VGM U ser’ s Manual Installing Trident 9520/25 Drivers for Windows NT 4.0 IMPORTANT: You shou ld ins tall th e Window s NT 4.0 Service Pack 3 firs t before ins tallin g the Trident 9520/25 VGA dri vers. If you don't h ave the Window s NT 4.
Chapter 6 System Monitor Utility CI5VGM U ser’ s Manual 97 6 System Monitor Utility This chapter introduces System Mo nitor Utility th at comes w ith the motherboard in conjunction with the onboard hardware m onitoring IC. The sections in the follow ing pages give th e functions of th e utility.
Chapter 6 System Monitor Utility 98 CI5VGM U ser’ s Manual System Monitor is a utility softw are th at oversee th e gen eral performance of sy stems, coverin g areas like s ystem temperature, sy stem voltage, C PU and system fan rotational speeds.
Chapter 6 System Monitor Utility CI5VGM U ser’ s Manual 99 The follow ing sc reen appears upon clicking on the Sy stem Monitor icon. Clicking on th e upper left corner button w o uld show you the latest compan y in formation . " Sum mary " provides the current s ystem status.
Chapter 6 System Monitor Utility 100 CI5VGM U ser’ s Manual 2. Po wer - disp lays the cur rent vo ltage status..
Chapter 6 System Monitor Utility CI5VGM U ser’ s Manual 101 3. Memory - displays the curren t memory usage status ..
Chapter 6 System Monitor Utility 102 CI5VGM U ser’ s Manual 4. Fan Speed - display s the curren t rotational speeds of CPU and chassis fans. 5. Disk - display s the disk supported f o rmats and disk space.
Chapter 6 System Monitor Utility CI5VGM U ser’ s Manual 103 6. Heat - displays th e CPU and sy stem temperatures . 7. Error Log - display s errors occurring af ter Sy stem Monitor is started.
Chapter 6 System Monitor Utility 104 CI5VGM U ser’ s Manual 8. Setting - s ets the values at wh ich an alarm is sounded. Voltage : the acceptable voltage ran ge betw een the "MAX" a nd "M IN" va lue. Temperature : temperature th reshold.
Chapter 7 LAN Desk Clie nt Manager CI5VGM U ser’ s Manual 105 7 LANDesk Client Manager This chapter gives a brief introduction to the optional LANDesk Client Manager (LDCM) u tility, as w ell as the installation procedures. The following items are covered in this chapter: Introduct ion .
Chapter 7 LAN Desk Clie nt Manager 106 CI5VGM U ser’ s Manual Introduction LANDesk Client Manager provides the capability f or managi ng compon ents (netw ork interface cards , mem ory, printers, sof tw are applications, etc.
Chapter 7 LAN Desk Clie nt Manager CI5VGM U ser’ s Manual 107 Installation The optio nal LANDesk utility that comes with th e CPU card runs in Window s NT or Window s 95 operating s ystem . Upon en tering the Win dows NT 4.0 or Window s 95 env ironm ent, insert the CD.
Chapter 7 LAN Desk Clie nt Manager 108 CI5VGM U ser’ s Manual Installing the Loca l Versio n of LDCM Double Click on ‘LA NDesk Client Man ager’ in the initial screen and the followin g screen will appear. Double click on the local version of LANDesk Cli e nt Ma na ger.
Chapter 7 LAN Desk Clie nt Manager CI5VGM U ser’ s Manual 109 Choose the directory location wh ere Setup will in stall LANDesk Clien t Manage r. Cl ick “Browse” if y ou want to change the dir ect ory sugge sted . Otherw ise, click “Next” to start installing L DCM.
Chapter 7 LAN Desk Clie nt Manager 110 CI5VGM U ser’ s Manual Installing the Administrative Version of LDCM After double clicking on ‘LA NDesk Client Manager’ in the initial screen, select the adm inistrative version of the LDCM and th e Welcome screen below w ill ap p ear.
Chapter 7 LAN Desk Clie nt Manager CI5VGM U ser’ s Manual 111 After LANDesk Client Manager Setup is complete, restart your com puter to be able to use the LANDesk Client Manager.
Chapter 7 LAN Desk Clie nt Manager 112 CI5VGM U ser’ s Manual This page is intentionally left blank..
Chapter 8 Et hernet Se tup User’ s Guide CI5VGM U ser’ s Manual 113 8 Ethernet Setup User’s Guide This chapt er gives a brief introduct ion to th e Intel 82558 Fa st Ethern et PCI controller. The following items are covered in this chapter: Introduct ion .
Chapter 8 Et hernet Se tup User’ s Guide 114 CI5VGM U ser’ s Manual Introduction Intel 82558B i s a 32-bi t 10/100MBps Eth ernet controller f or PCI local bus- compli ant PCs .
Chapter 8 Et hernet Se tup User’ s Guide CI5VGM U ser’ s Manual 115 LAN D r iver Installation for Windows 95 The CI5VGM comes with a diskette labeled Intel 82558B LAN W indows 95/98 & W indows NT 4.0 Drivers that is to b e used in conjunction w ith the LA N drivers installation.
Chapter 8 Et hernet Se tup User’ s Guide 116 CI5VGM U ser’ s Manual 2. Click Sy s tem . 3. Click Device Manager ..
Chapter 8 Et hernet Se tup User’ s Guide CI5VGM U ser’ s Manual 117 4. Expand Other Devices . 5. Select PCI Ethernet Controller , then click Properties .
Chapter 8 Et hernet Se tup User’ s Guide 118 CI5VGM U ser’ s Manual 6. Click Driver . [ 1..
Chapter 8 Et hernet Se tup User’ s Guide CI5VGM U ser’ s Manual 119 7. Click Update Driver ..
Chapter 8 Et hernet Se tup User’ s Guide 120 CI5VGM U ser’ s Manual 8. Insert the diskette labeled Intel 82558B LAN W indows 95/98 & W indows NT 4.0 Drivers into the floppy disk dri ve, then cli ck Next . 9. Click Fini sh . Ensure th e updated driv er men tioned is for In tel 82558 Fast Ethernet.
Chapter 8 Et hernet Se tup User’ s Guide CI5VGM U ser’ s Manual 121 10. Click OK . 11. Type A:, then click OK . 12. Click OK ..
Chapter 8 Et hernet Se tup User’ s Guide 122 CI5VGM U ser’ s Manual 13. Type the Computer Name and Workgr oup , then click Close . 14. Insert the W indows 95 CD RO M , then click OK .
Chapter 8 Et hernet Se tup User’ s Guide CI5VGM U ser’ s Manual 123 15. Type D:W in95 (Assuming D:Win95 is the director y location of the Windows 95 files), then click OK . 16. Click Yes to restart the com puter and for th e settings to tak e effect.
Chapter 8 Et hernet Se tup User’ s Guide 124 CI5VGM U ser’ s Manual LAN Driver Ins tall ation fo r Window s NT 4.0 The CI5VGM comes with a diskette labeled Intel 82558B LAN W i ndows 95/98 & W indows NT 4.0 Driv ers that is to be used in conjunction of the LAN drivers installation.
Chapter 8 Et hernet Se tup User’ s Guide CI5VGM U ser’ s Manual 125 Running Diagnostics The CI5VGM comes w ith a diskette contain ing the diagnostic sof tw are supporti ng the Intel 82558B Ethern et controll er. Follow the steps below to use the Setup Utility .
Chapter 8 Et hernet Se tup User’ s Guide 126 CI5VGM U ser’ s Manual 3. Selecting Test adapter w ill show the f ollowing screen . 8255x-based PCI EtherE xpress™ adapter Set up V4.16 Test adapter Bus=0 Dev=0Bh S lot=11 Addr=004063001000 I RQ=10 Diagnosti c test s: Adapter test s …………………………….
Chapter 8 Et hernet Se tup User’ s Guide CI5VGM U ser’ s Manual 127 5. Upon selectin g Others under the Install network drivers main me nu screen, the followin g screen w ill app ear. 8255x-based PCI EtherE xpress™ adapter Set up V4.16 Other 1. LANtas tic 6.
Appendix 128 CI5VGM U ser’ s Manual Appendix A. I/O Port Address M ap B. Interrupt Request Lines (IRQ).
Appendix CI5VGM U ser’ s Manual 129 A. I/O Port Address M ap Each peripheral devi ce in the sy stem is ass igned a s et of I/O port addresses wh ich also becomes the identity of the device. There are a total of 1K port address s pace available. The follow ing table lists the I/O port addresses u sed on th e Industrial C P U Card.
Appendix 130 CI5VGM U ser’ s Manual B. Interrupt Request Lines (IRQ) There are a total of 15 IR Q lines available on the Indus trial CPU Card. Peripheral devices use interrupt request lines to notify CPU for the service required. The f ollow ing table show s the IRQ us ed by the devices on the In dustrial CPU Card.
Ein wichtiger Punkt beim Kauf des Geräts IBM CI5VGM Series (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie IBM CI5VGM Series noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für IBM CI5VGM Series - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von IBM CI5VGM Series reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über IBM CI5VGM Series erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon IBM CI5VGM Series besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von IBM CI5VGM Series verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit IBM CI5VGM Series. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei IBM CI5VGM Series gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
