Benutzeranleitung / Produktwartung 917.240462 des Produzenten Husqvarna
Zur Seite of 56
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty .
2 SAFETY RULES Safe Operation Practices for Ride-On Mowers DANGER: THIS CUTTING MACHINE IS CAP ABLE OF AMPUT A TING HANDS AND FEET AND THROW ING OBJECTS. F AIL URE TO OBSERVE THE FOLL OWING SAFETY INSTRUCTIONS COULD RESUL T IN SERIOUS INJURY OR DEA TH.
3 SAFETY RULES Safe Operation Practices for Ride-On Mowers • Be sure the area is clear of bystanders before operat- ing. Stop machine if anyone enters the area. • Never carry passengers. • Do not mow in reverse unless absolutely necessary . Al ways look down and behind before and while back- ing.
4 SAFETY RULES ......................................................... 2-3 PRODUCT SPECIFICA TIONS ....................................... 4 CUSTOMER RESPONSIBILITIES ................................. 4 ASSEMBL Y ....................................
5 UNAS SEMBLED P ARTS (2) Keys Slope Sheet Key (1) Oil Drain Tube AS SEMBL Y Y our new tractor has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. Fig. 1 TO CHECK BA TTERY (See Fig. 1) • Lift seat to raised position.
6 AS SEMBL Y CHECK TIRE PRESSURE The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance. • Reduce tire pressure to PSI shown on tires. CHECK DECK LEVELNESS For best cutting results, mower housing should be properly leveled.
7 OPERA TION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. DANGER, KEEP HANDS AND FEET AWAY FREE WHEEL (Automatic Models only.
8 OPERA TION KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERA TING Y OUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments. Save this manual for future reference.
9 OPERA TION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye dam age. Always wear safety glass es or eye shields while operating your tractor or per form ing any ad just ments or repairs.
10 OPERA TION TO USE CRUISE CONTROL (J) (See Fig. 7) The cruise control feature can be used for forward travel only . Fig. 7 TO ADJUST GAUGE WHEELS (See Fig. 9) Gauge wheels are prop er ly ad just ed when they are slight ly off the ground when mower is at the desired cutting height in operating position.
11 OPERA TION Fig. 10 Fig. 12 TO TRANSPORT (See Figs. 3 and 12) When pushing or towing your tractor , be sure to disengage transmission by placing freewheel control in free wheel ing po si tion. F ree wheel control is located at the rear drawbar of tractor .
12 OPERA TION CAUTION: Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to sep a ra tion and for ma tion of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. T o avoid engine problems, the fuel system should be emptied before stor age of 30 days or longer .
13 OPERA TION PURGE TRANSMISSION CAUTION: Never engage or disengage freewheel lever while the engine is run ning. T o ensure proper operation and performance, it is rec om- mend ed that the transmission be purged before operating tractor for the first time.
14 MAINTENANCE ➀ General Purpose Grease ➁ Refer to Maintenance “ENGINE” Section 01965 ➁ ENGINE ➀ FRONT WHEEL BEARING ZERK ➀ STEERING SECTOR GEAR TEETH ➀ FRONT WHEEL BEARING ZERK ➀ SPINDLE ZERK ➀ SPINDLE ZERK T R A C T 0 R 1 - Change more often when operating under a heavy load or in high ambient temperatures .
15 MAINTENANCE TRACTOR Always observe safety rules when per form ing any main te nance. BRAKE OPERA TION If tractor requires more than five (5) feet to stop at highest speed in high est gear on a level, dry concrete or paved surface, then brake must be checked and ad just ed.
16 MAINTENANCE V -BEL TS Check V -belts for deterioration and wear after 100 hours of operation and replace if necessary . The belts are not ad just able. Re place belts if they begin to slip from wear . TRANSAXLE COOLING The transmission fan and cooling fins should be kept clean to assure proper cooling.
17 MAINTENANCE CL AMP FUEL FIL TER Fig. 17 SP ARK PLUGS Replace spark plugs at the beginning of each mowing season or after every 100 hours of operation, whichever occurs first. Spark plug type and gap setting are shown in “PROD UCT SPECIFICA TIONS” section of this manual.
18 SERVICE AND ADJUSTMENTS WARNING: TO A VOID SERIOUS INJURY , BEFORE PERFORMING ANY SER VICE OR AD JUST MENTS: • Depress brake pedal fully and set parking brake. • Place attachment clutch in “DISENGAGED” position. • T urn ignition key to “STOP ” and remove key .
19 SERVICE AND ADJUSTMENTS E F C G Q R D K G P B L M A IMPORT ANT : CHECK BEL T FOR PROPER ROUTING IN ALL MOWER PULLEY GROOVES. • Raise attachment lift lever to highest position. • If necessary , adjust gauge wheels before op er at ing mower as shown in the Operation section of this manual.
20 SERVICE AND ADJUSTMENTS • If adjustment is necessary , see step in Visual Adjust- ment instructions above. • Recheck measurements, adjust if necessary until both sides are equal. FRONT -TO-BACK ADJUSTMENT (See Figs. 28 & 29) IMPORT ANT : Deck must be level side-to-side.
21 SERVICE AND ADJUSTMENTS Fig. 30 Fig. 31 TO REPL ACE MOWER BL ADE DRIVE BEL T (See Fig. 30) The mower blade drive belt may be replaced without tools. P ark the tractor on level surface. Engage parking brake. BEL T REMOV AL - • Remove mower from tractor (See “TO REMOVE MOW ER” in this section of manual).
22 SERVICE AND ADJUSTMENTS Fig. 32 RE T AIN ING RING WASH ERS SQUARE KEY (REAR WHEEL ONL Y) AXLE COVER TO ST ART ENGINE WITH A WEAK BA TTERY (See Fig. 33) WARNING : Lead-acid batteries gen- er ate ex plo sive gases. Keep sparks, flame and smoking ma te ri als away from bat ter ies.
23 SERVICE AND ADJUSTMENTS TO REPL ACE HEADLIGHT BULB • Raise hood. • Pull bulb holder out of the hole in the backside of the grill. • Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill. • Close hood.
24 STORAGE Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more. WARNING: Never store the trac tor with gas o line in the tank inside a building where fumes may reach an open flame or spark.
25 TROUBLESHOOTING POINTS PROBLEM CAUSE CORRECTION Will not start 1. Out of fuel. 1. Fill fuel tank. 2. Engine not “CHOKED” properly . 2. See “TO ST ART ENGINE” in Operation section. 3. Engine flooded. 3. Wait several minutes before attempting to start.
26 TROUBLESHOOTING POINTS PROBLEM CAUSE CORRECTION Engine continues to run when oper- ator leaves seat with attachment clutch engaged 1. Faulty operator -safety presence control system. 1. Check wiring, switches and connections. If not corrected, contact an authorized service center/ department.
27 M FUSE ST ARTER SOLENOID BA TTERY CLUTCH/BRAKE (PEDAL UP) REVERSE SWITCH (NOT IN REVERSE) SEA T SWITCH (NOT OCCUPIED) SHORTING CONNECTOR CHASSIS HARNESS IGNITION UNIT HOUR METER CHASSIS HARNESS CON.
28 TRACTOR - - MODEL NUMBER 917.240462, PRODUCT NO . YTH20K46 ELECTRICAL 30 33 34 22 79 21 41 42 26 43 27 40 71 16 87 25 T06S 90 28 55 With 12V Outlet Option 59 103 With Service Minder Option 46 46 10.
29 TRACTOR - - MODEL NUMBER 917.240462, PRODUCT NO . YTH20K46 ELECTRICAL KEY P ART NO . NO . DESCRIPTION 1 532 16 34-65 Battery 2 874 76 04-12 Bolt Hex Head 1/4-20 x 3/4 8 532 19 32-28 Box Battery 16 .
30 TRACTOR - - MODEL NUMBER 917.240462, PRODUCT NO . YTH20K46 CHASSIS 68 68 68 183 183 236 236 34 chassis-tex_GT HUSQ_II_46 235 235 52 217 189 189 152 68 68 213 218 194 228 228 159 159 150 130 130 14 .
31 TRACTOR - - MODEL NUMBER 917.240462, PRODUCT NO . YTH20K46 CHASSIS KEY P ART NO . NO. DESCRIPTION 3 532 43 97-52 Logo Crown 5 532 43 74-73 Dash 14 532 44 11-77 Hood 15 532 43 97-33 Lens LH 18 532 43 77-62 Grille/Lens Asm.
32 TRACTOR - - MODEL NUMBER 917.240462, PRODUCT NO . YTH20K46 DRIVE 52 51 170 171 225 125 drive- t ex_K46_pedal_87 2 2 73 73 33 205 1 116 33 230 230 183 183 205 116 56 213 221 160 206 26 207 209 92 12.
33 TRACTOR - - MODEL NUMBER 917.240462, PRODUCT NO . YTH20K46 DRIVE NOTE: All component dimensions given in U.S. inches 1 inch = 25.4 mm 1 – – – – – – T ransaxle, TUFF TORQ K46 BT (426120)(See T ransaxle breakdown) 2 532 12 35-83 Key 15 819 13 13-16 Washer 13/32 x 13/16 x 16 Ga.
34 TRACTOR - - MODEL NUMBER 917.240462, PRODUCT NO . YTH20K46 ENGINE 1 42 9 SP ARK ARRESTER KIT 92 45 97 96 85 90 37 28 29 37 21 20 94 95 69 engine-te x_K ohl_29_r1 18 15 2 87 81 82 12.
35 KEY P ART NO . NO . DESCRIPTION NOTE: All component dimensions given in U.S. inches 1 inch = 25.4 mm For engine service and replacement parts, call the toll free number for your engine manufacturer listed below: Kohler Co. 1-800-544-2444 1 – – – – – – – – Engine K ohler Model No.
36 TRACTOR - - MODEL NUMBER 917.240462, PRODUCT NO . YTH20K46 STEERING ASSEMBL Y 61 steering-tex_LEGND2_16_r2 21 1 26 35 19 59 58 5 62 15 14 13 13 53 8 70 68 69 16 28 28 13 22 64 4 15 14 6 9 8 7 9 8 7.
37 TRACTOR - - MODEL NUMBER 917.240462, PRODUCT NO . YTH20K46 STEERING ASSEMBL Y KEY P ART NO . NO . DESCRIPTION 1 532 43 97-40 Wheel, Steering 2 532 19 59-68 Axle Asm., F ront 4 532 40 30-87 Spindle Asm., LH 5 532 40 30-88 Spindle Asm., RH 6 532 12 49-31 Bearing, Race Thrust Harden 7 532 12 17-48 Washer 25/32 x 1-5/8 x 16 Ga.
38 TRACTOR - - MODEL NUMBER 917.240462, PRODUCT NO . YTH20K46 MOWER DECK 30 43 42 60 38 63 46 147 55 64 30 32 31 33 200 34 56 57 59 40 188 1 69 69 199 40 145 15 14 21 25 26 27 198 29 21 21 68 23 24 14.
39 TRACTOR - - MODEL NUMBER 917.240462, PRODUCT NO . YTH20K46 MOWER DECK KEY P ART NO . NO. DESCRIPTION NOTE : All component dimensions given in U.S. inches 1 inch = 25.4 mm 1 532 44 23-82 Mower Housing 2 532 40 55-07 Cover Mandrel LH 3 532 40 55-06 Cover Mandrel RH 6 532 19 51-86 Arm Suspension 7 532 41 63-58 Screw #10 x 0.
40 TRACTOR - - MODEL NUMBER 917.240462, PRODUCT NO . YTH20K46 MOWER LIFT 7 3 87 10 88 2 89 90 98 97 97 lift-tex_17_r3 *Key 91 may be substituted for K ey 101 91 101* 87 100 89 89 87 2 532 42 20-27 Shaft Asm.
41 TRACTOR - - MODEL NUMBER 917.240462, PRODUCT NO . YTH20K46 SEA T AS SEMBL Y 1 532 43 98-22 Seat 2 532 18 01-66 Bracket Pivot F ender 3 532 14 06-75 Strap, Asm F ender 6 873 80 06-00 Nut, Lock w/Ins.
42 TRACTOR - - MODEL NUMBER 917.240462, PRODUCT NO . YTH20K46 DECALS NOTE: All component dimensions given in U.S. inches 1 inch = 25.4 mm KEY P ART NO .
43 7 414395 V ent V alve 15 8 414396 Magnet 9 414397 Magnet Holder 10 415923 Pump Shaft/Bearing Kit 13 414398 Bypass Lever 15 414399 Sealing Cap 30 16 414400 Snap Ring C 35 19 414401 O -Ring 1a P10a 2.
44 TRACTOR - - MODEL NUMBER 917.240462, PRODUCT NO . YTH20K46 K OHL ENGINE - MODEL NO. SV600-0212 CRANKSHAFT 1-20-4 20 014 32-S 25 086 214-S X-42-15-S 25 139 27-S 20 043 15-S 20 043 12-S 20 380 16-S 2.
45 TRACTOR - - MODEL NUMBER 917.240462, PRODUCT NO . YTH20K46 K OHL ENGINE - MODEL NO. SV600-0212 CRANKCASE (USE SHORT BLOCK) 12 136 12-S 20 380 16-S 20 423 02-S 12 173 08-S 20 032 01-S 20 032 08-S 20.
46 TRACTOR - - MODEL NUMBER 917.240462, PRODUCT NO . YTH20K46 K OHL ENGINE - MODEL NO. SV600-0212 12 380 01-S 62 380 02-S 20 040 02-S 20 040 06-S 20 040 03-S 20 040 04-S 20 040 07-S 20 153 01-S 25 139.
47 TRACTOR - - MODEL NUMBER 917.240462, PRODUCT NO . YTH20K46 K OHL ENGINE - MODEL NO. SV600-0212 HEAD/V AL VE/BREA THER 4-20-19 20 41 1 02-S 20 41 1 04-S 20 41 1 05-S 20 841 01-S 20 841 02-S 20 017 0.
48 TRACTOR - - MODEL NUMBER 917.240462, PRODUCT NO . YTH20K46 K OHL ENGINE - MODEL NO. SV600-0212 BL OWER HOUSING & BAFFLES 6-20-7 20 027 02-S 20 027 03-S 20 027 06-S 20 027 07-S 20 027 01-S 20 08.
49 TRACTOR - - MODEL NUMBER 917.240462, PRODUCT NO . YTH20K46 K OHL ENGINE - MODEL NO. SV600-0212 25 326 18-S 25 326 08-S 25 050 22-S 25 050 21-S 12 050 13-S 25 050 07-S 25 050 08-S 47 154 01-S 20 462.
50 TRACTOR - - MODEL NUMBER 917.240462, PRODUCT NO . YTH20K46 K OHL ENGINE - MODEL NO. SV600-0212 25 173 33-S 25 155 51-S 25 326 08-S 20 126 12-S M-445010-S FUEL SYSTEM 20 072 04-S 20 094 01-S 20 094 .
51 TRACTOR - - MODEL NUMBER 917.240462, PRODUCT NO . YTH20K46 K OHL ENGINE - MODEL NO. SV600-0212 CRANKSHAFT 1-20-4 P ART NO. QTY . DESCRIPTION 20 014 32-S 1 Kit, Crankshaft Assembly (Includes 25 139 27-S) 25 139 27-S 1 Plug, Cup X -42-15-S 1 Key , 3/16" X 5/8" 20 043 15-S 1 Gear , Crankshaft 25 086 137-S 4 Screw , Flg M6x1.
52 TRACTOR - - MODEL NUMBER 917.240462, PRODUCT NO . YTH20K46 K OHL ENGINE - MODEL NO. SV600-0212 NOT ILLUSTRA TED 20 176 13-S 1 Harness, Wiring 25 452 01-S 2 T erminal 25 454 05-S 1 Tie BL OWER HOUSING & BAFFLES 6-20-5 P ART NO.
53 15 DEGREES MAX. FOLD ALONG DOTTED LINE THIS IS A 15 DEGREE SLOPE ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION WARNING: To avoid serious injury, operate your tractor up and down the face of slopes, never across the face.
54 SERVICE NOTES.
55 SERVICE NOTES.
05.16.11 CL Printed in the U.S.A..
Ein wichtiger Punkt beim Kauf des Geräts Husqvarna 917.240462 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Husqvarna 917.240462 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Husqvarna 917.240462 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Husqvarna 917.240462 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Husqvarna 917.240462 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Husqvarna 917.240462 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Husqvarna 917.240462 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Husqvarna 917.240462. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Husqvarna 917.240462 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
