Benutzeranleitung / Produktwartung Pool System des Produzenten Huffy
Zur Seite of 17
1 04/03 P/N 211984A © COPYRIGHT 2000 by HUFFY SPORTS Toll-Free Customer Service Number for U.S: 1-800-558-5234, For Canada: 1-800-284-8339 , For Europe: 00 800 555 85234 (Sweden: 009 555 85234 ), For Australia: 1-800-333 061 Internet Address: http://www.
2 P/N 211984A 04/03 WARNING FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. Owner must ensure that all players know and follow these rules for safe operation of the system. In the U.S.: 1-800-558-5234 and Canada Only: 1-800-284-8339 211239 1/98 See instruction manual for proper installation and maintenance.
04/03 P/N 211984A 3 200439 1 1/00 1 3 2 MOVING SYSTEM 1. While holding pole, rotate basketball system forward until wheels engage with ground. 2. Move basketball system to desired location. 3. Carefully rotate basketball system upright. 4. Reattach ground restraint and check system for stability .
4 P/N 211984A 04/03 For more information on assembly, placement, proper use and maintenance, visit The American Basketball Council website at http://www.smarthoops.com. IMPORT ANT! Remove all content s from boxes. Be sure to check inside pole sections; hardware and additional p art s are p acked inside.
04/03 P/N 211984A 5 Get to know the basic parts of your basketball system..... STRUTS BACKBOARD FRONT RIM WHEEL CARRIAGE ASSEMBL Y BASE POLE.
6 P/N 211984A 04/03 P ARTS LIST - (See Hardware Identifier) Item Qty . Part No. Description 1 1 206740 T ank (White) 2 1 200628 1 1.75 Long Axle Rod 3 2 226401 Wheel 4 1 900220 T op Pole Section (White) 5 1 201 190 Cap (White) 6 1 986102 Bottom Pole Section (White) 7 1 202822 Eyebolt, 3/8-16 x 3-3/4 Long 8 1 202820 Rod, 3/8 O.
04/03 P/N 211984A 7 HARDW ARE IDENTIFIER (BOL TS & STEEL RODS) HARDW ARE IDENTIFIER (NUTS & W ASHERS) HARDW ARE IDENTIFIER (PLASTIC CLIPS & SP ACERS) Item #14 (1) Item #12 (6) Item #10 (1).
8 P/N 211984A 04/03 TOOLS REQUIRED FOR THIS SECTION HARDW ARE USED IN THIS SECTION (not actual size) SECTION A : ASSEMBLE THE BASE 9/16” and 1/2” 9/16” and 1/2” AND/OR This is what your system.
04/03 P/N 211984A 9 1. 1 Remove contents from t ank 4 6 TOP BOTTOM 5” (13 cm) 2. Correctly identify each pole section and mark indicated distance from ends with t ape as shown. TAPE (Not Supplied) 3. WOOD SCRAP IMPORT ANT! Center the alignment slot of bottom pole section (6) in the lower hole of top pole section (4) as shown.
10 P/N 211984A 04/03 2. Install rod (5) through holes in bottom pole section (4) and eyebolt (6). 7 8 6 8 7 4 6 10 6 8 7 3. 2 29 29 3 3 9 Install wheel axle (2) through wheel carriage (9). Inst all wheels (3) onto wheel axle (2) with spacers (29) as shown.
04/03 P/N 211984A 11 11 13 1 14 13 12 12 4. Secure tank strut s (13) to pole. Rotate non-secured ends of t ank struts (13) outward to mounting holes in tank as shown. 5. 13 13 1 Secure non-secured ends of tank strut s (13) to t ank as shown. Repeat for opposite side.
12 P/N 211984A 04/03 TOOLS REQUIRED FOR THIS SECTION HARDW ARE USED IN THIS SECTION SECTION B: ASSEMBLE THE BACKBOARD 1/2” 1/2” OR This is what your system will look like when you’ve finished th.
04/03 P/N 211984A 13 21 22 22 18 20 17 17 Mount brackets (20) and rim (18) to backboard and finger tighten as shown. NOTE: Final adjustments will be made in S tep 9. IMPORT ANT! For spring loaded rim assembly , refer to instructions included with rim hardware.
14 P/N 211984A 04/03 8. Install clip s. CLI P “ARM” CLIP “BODY” Insert one “arm” of clip into ram as shown. T wist “body” of clip slightly so that second “arm” slides over the top of the first “arm” as shown. Push in direction indicated by arrows.
04/03 P/N 211984A 15 Insert net into bottom of clip as shown. SIDE VIEW T wist net until it snap s into position. Net must be centered through clip. NET NETCLIP SIDE VIEW NET NETCLIP NET INST ALLA TION 9.
16 P/N 211984A 04/03 1. 28 26 27 26 Place assembled unit to desired location. Fill tank with water (30 gallons (1 14 liters)) or sand (360 lb. (163 kg)) and snap tank cap (28) in place.
04/03 P/N 211984A 17 1. SECTION E: APPL Y HEIGHT AND MOVING LABEL Apply Height and Moving label on pole as shown. 15 201261 3/99 1 3 2 MOVING SYSTEM 1. While holding pole, rotate basketball system forward until wheels engage with ground. 2. Move basketball system to desired location.
Ein wichtiger Punkt beim Kauf des Geräts Huffy Pool System (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Huffy Pool System noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Huffy Pool System - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Huffy Pool System reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Huffy Pool System erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Huffy Pool System besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Huffy Pool System verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Huffy Pool System. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Huffy Pool System gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.