Benutzeranleitung / Produktwartung PHOTOSMART C7200 des Produzenten HP
Zur Seite of 309
HP Photo smar t C7 200 A ll-in- One s er i es W in do w s He lp.
Contents 1 HP Photosmart C7 200 All-in-One series H elp ......................... ................................. ..............9 2 HP All-in-On e overview The HP All-in-One at a glance............ .............................................. ....
Computer connection information.. .................. ................. ............................ ............................30 Supported connec tion types.............................. ............................................................ .
Choose papers for printing and copying................................... ................................................73 Recommended papers for printing and copying....................... ..........................................73 Recommended papers for prin ting only.
Edit photos using th e control panel.. ....................... ................... .................................. ..........109 Zoom and pan to crop a photo ......................... .................................. .............................
11 Use the fax features Send a fax..............................................................................................................................131 Send a basic fax....................... . ...................... ......................
Work with ink cartridges....... ...................... ..................... ...................... ...................... ......... ...158 Replace the ink cartridges.................. ................. ... ........................... . ..............
HP Quick Exchange Servic e (Japan)................................. ....................................................282 Call HP Korea customer su pport........................ ....................................................................282 Prepare the HP All-in-One f or shipment.
8 Contents.
1 HP Photosmart C7200 All-in- One series Help For informati on about the HP All -in-One, see: •“ HP All-in -One overvie w” on page 11 •“ Find more informatio n” on page 23 •“ Finish se.
Chapter 1 10 HP Photosmart C7200 All-in-One series Help HP Photosmart C7200 All-in- One series Help.
2 HP All-in-One overview Use the HP All-in-One to qui ckly and easily accomplish ta sks such as making a copy, scanning documents, sending and receiving faxes, or p rinting photos from a memory card. You can access many HP All-i n-One functions direct ly from the co ntrol panel, without turni ng on your computer.
Label Description 7 Paper-width and paper-length guides for the photo tray 8 Paper-length guide for the main inp ut tray 9 Photo tray 10 Ink cartridge door 11 Front USB port for your came ra or other .
Control panel feature s The follow ing diagram an d related table provide a quick reference to the H P All-in-One control pane l features. Label Name and Description 1 Displ ay : Displays menus, photos, and messages. The angle of the display can be changed for better viewing.
Label Name and Description 12 Fax Menu : Presents the Enter Fax Number scree n to enter a fax number. If you press it again, the Fax Menu appears where you can select fax options. 13 Auto Answer : When this button is lit, the HP All- in-One automatically answers incoming phone calls.
Icon Purpose NOTE: The ink level icons will only appear if one of the ink cartridges is less than 50% full. If the ink level for all ink cartridges is more than 50% full, the ink cartridge icons do not appear on the display. Shows that the ink cartridge is nearly empty, and will need to be repla ced.
• Setup Menu • Help Menu Photosmart Exp ress Menu The fol lowing opt ions are avail able in t he Photosmart Ex press menu when you insert a memory card o r storage devic e, or when you p ress Photo Me nu on the contro l panel.
Scan Menu The follow ing options a re available w hen you press the Scan Menu button on the control panel. NOTE: The applica tions that app ear on the Scan Menu vary depending on the software applicat ions install ed on your computer.
NOTE: The Bluetooth Menu option onl y appears if an optional H P bt450, Printer and PC Adapter with Bluetooth ® Wireless Technology is atta ched to the HP Al l-in- One. Help Menu The Help Menu menu provides quick access to key help topi cs and is ava ilable when you press the Help button.
To enter text 1. Press the keypad numbers that corre spond to the lett ers of a name. For example, the letters a, b, and c co rrespond to the n umber 2, as show n on the butt on below. TIP: Press a but ton multiple times t o see the available ch aracters.
To enter tex t using the visual keyb oard 1. To select a letter, n umber, or sym bol in the visu al keyboard, pr ess , , , and to highlight the appropriate selection. To enter lo wercase le tters, upper case letters, numb ers, and symbols • To ente r lowercase letters, sele ct the abc button on the visual keyboard, and then press OK .
Available symbols Description Available when ente ring + Displays a plus symbol. This symbol does not affect dialing. Fax header name, fax header number, speed dial names, speed dial numbers, and fax or phon e numbers Use the HP Photosmart Software The HP Phot osmart Software prov ides a fast and easy way to make prints of your photos.
Chapter 2 22 HP All-in-One overview Overvi ew.
3 Find more information You can access a variety of re sources, both prin ted and onscre en, that p rovide information about sett ing up and using the HP Al l-in-One. Setup Guide The Setup Guid e provides instructions for setting up the HP All- in-One and installing software.
Chapter 3 24 Find more information Find more informat ion.
4 Finish setting up the HP All-in- One After you have completed the steps in your Setup Guide, re fer to this section to help you finish settin g up the HP All-in -One. This sect ion contains imp ortant setup -related information f or your device, including inform ation on setting prefere nces.
To set your language and country/regi on 1. Press Setup . 2. Press to highligh t Preferenc es , and then press OK . 3. Press to highligh t Set Language , and then press OK . 4. Press to scroll thro ugh the language s. When the language you want to use appears, press OK .
To adjust the volum e of fax soun ds 1. Press Setup . 2. Press to highlig ht Basic Fax Setu p , and then p ress OK . 3. Press to highlig ht Fax Sound Volume , and the n press OK . 4. Press to highl ight one of t he option s: Soft , Loud , or Off , and then press OK .
3. Press to highligh t Bluetooth Tray Select , and then press OK . 4. Press to highligh t Main Tray or Photo Tr ay , and then press OK . Restore the factory defaults You can restore the current sett ings to what they we re when yo u purchased the H P All- in-One.
3. Press to highlig ht Tips Slide show , and then press OK . 4. Press or to highlight On or Off , and then press OK . Fax preferenc es You shoul d review the i nformation in th e Fax setup section of the printed docum entation to find out the re commended settings for the opti ons described in the following t opics.
Pulse Dialing . Contact your local telephone comp any if you are unsur e which setting to use. NOTE: If you select Pulse Di aling , some phone system feat ures might not be available. It can also take longer to dia l a fax or phone number. NOTE: This feature is no t supported in all countries/re gions.
Wireless Technology into the front USB po rt, Bluetooth ® devices such as PDAs and camera phones can p rint to the HP All-in-O ne. NOTE: In the remainder o f this chapter, the HP bt450, Pri nter and PC Adapter with Bluetooth ® Wireless Techn ology is referred to simply as an HP bt450.
Connect usin g integrated wi reless WLAN 802.11 The HP All-in-O ne uses an internal n etworking compon ent that supports a wireless network. For detailed in structions on connecting the HP Al l-in-One to a wi reless (802.11) network, see “ Integrat ed wireless WLAN 802.
5. When you have finish ed entering a name for t he HP All-in-One, press OK . The name you ente red will appear on your Bluetooth device when you connect to the HP All-in -One to prin t.
6. Press until Se curity Level i s highlighted, an d then press OK . 7. Press OK to select High . High leve l security requires aut hentication . Passkey auth entication i s now set for the HP All-in-One.
NOTE: The only sof tware f unctionalit y available with a Bluetoo th connection is printing. Scan ning and soft ware-based faxing cannot be done over a Bluetoot h connection.
To install and print usi ng the Widcomm stack 1. Make sure that you have installed the HP All-in-One soft ware on the computer. NOTE: The purpose of in stalling the soft ware is to make sure the prin ter driver is available for the Blueto oth ® connection.
If you want to: See this section: Change the HP All-in-One fro m a USB connection to a network connection. NOTE: Use the instructions in this section if you first installed the HP All- in-One with a USB connection, and you now w ant to change to either a wireless or Ethernet network connection.
What yo u need for a w ired networ k Before you connect the HP All- in-One to a network, ma ke sure you have all of th e required materials. ❑ A functional Ethern et network that i ncludes a router, swit ch, or hub with an Et hernet port. ❑ CAT-5 Ethernet cable .
2. Connect the Etherne t cable to the Ethern et port on the back of t he HP All-in-One. 3. Connect the oth er end of the Etherne t c able to an available port on your Ethernet router or switc h. 4. Once you have connected th e HP All-in-One to the network, insta ll the software.
The advantages of a wireless infrastructure network as compare d to an ad hoc netw ork include: • Advanced netw ork security • Enhanced relia bility • Network fle xibility • Better performance, especially with 802.11 g mode • Shared Broadband Inte rnet access To set up the HP All-in- One on an integrated wireless WLAN 802.
supports this feature. See the do cumentation that c ame with your wirele ss router or access point to find out if it supports using EasySet up and for additional setup in structions.
c . When you have f inished entering th e new SSID, use the arrow bu ttons to hi ghlight Done on the visual keyb oard, and then press OK . TIP: If the HP All-in-One is unable to disco ver the network ba sed on the network nam e you entered, you will see the f ollowing prom pts.
Wireless ad ho c network setup Use this sect ion if you want to co nnect the H P All-in-One t o a wireless-capable com puter without using a wireless router or acce ss point. NOTE: An ad hoc conn ection is availa ble if you do not have a wireless router or access point.
1. In the Control Panel , double-click Network Connecti ons . 2. On the Network Connections window, right-click the Wireless N etwork Connection . If you see Enable on the pop-up menu , select it. Oth erwise, if you see Disable o n the menu, the wirel ess connection is al ready enabled.
Create a network prof ile for other o perating syst ems If you have an op erating system other than Windows XP, HP recommends that yo u use the configuratio n program that came with your wireless LAN card. To find the configuration pro g ram for you r wireless LAN card, acce ss your compute r's list of programs.
c . When you have f inished entering th e new SSID, use the arrow bu ttons to hi ghlight Done on the visual keyb oard, and then press OK . TIP: If the HP All-in-One is unable to disco ver the network ba sed on the network nam e you entered, you will see the f ollowing prom pts.
To install the Windo ws HP All-in-One so ftware 1. Quit all applica tions running on your computer, inclu ding any virus de tection softw are. 2. Insert the Windows CD tha t came with t he HP All-in-One i nto the CD-RO M drive on your computer an d follow the o n screen instru ctions.
4. Press to highligh t Wirele ss Setup Wizard , and then press OK . This runs the Wirele ss Setup Wizard . 5. Install the so ftware for a netw ork connection, choose Add a Device , and then choose Through the network .
Use the W ireless Setup W izard The Wireless Setup Wi zard provides an e asy way to set up and manag e a wirele ss connecti on to the HP All-i n-One. To run the Wireles s Setup Wiza rd 1. On the contro l panel of the HP A ll-in-One, press Setup . 2. Press until Network is highli ghted, and t hen press OK .
To resto re network defau lts 1. On the control pan el of the HP All-in-One, press Setup . 2. Press until Network is highlighted, and t hen press OK . 3. Press until R estore Networ k Defaults is highlight ed, and then press OK . 4. Press OK to confirm that you want to restore the network de faults.
To set link spee d 1. Press Setup . 2. Press until Network is highligh ted, then press OK . The Network menu appea rs. 3. Press until Advanced Setup is highlight ed, and then pre ss OK . Press until Set Link Speed is highlight ed, and then press OK . 4.
Use the Embedded Web Ser ver If your computer is con nected to an HP All-in-One on a network, you can acce ss the Embedded Web Server that resides in th e HP All-in-One.
Use the Embedded Web Server setup wizard The network set up wizard provide d in the Embedded W eb Server gives you an intui tive interface to your ne twork connecti on parame ters. To access the Em bedded Web Server setup wizard 1. Print a network configuration page to find the IP address fo r the HP All-in-One.
Genera l network setting s The follow ing table describe s the general netw ork settings shown on the ne twork configurati on page. Parameter Description Network Status Status of the HP All-in-One: • Ready : The HP All-in-One is r eady to receive or transmit data.
Parame ter Description NOTE: Some Internet service provide rs (ISPs) require that you register the MAC address of the Network Card or LAN Adapter that was connected to your cable or DSL modem du ring installation. IP Address This address uniq uely identifies the dev ice on the network.
Parameter Description broken up into packets. Each packet contains the destina tion address as well as the data. Total Packets received The number of packets received by the HP All- in-One without error since it has been turned on. The counter clears after the HP All-in -One is turned off.
Parame ter Description DNS server The IP address of the do main name service (DNS) for the networ k. When you use the Web or send an e- mail message, you use a domain name to do it. For example, the URL http://www.hp.co m contains the domain name hp.com.
Parameter Description number. Value is from 1 to 14; countries/regions might limit the r ange of approved chan nels. • (number) : Value ranging from 1 to 14, depending on country/region. • None : No channel is in use. • Not Applicable : The WLAN is disabled or this parameter does not apply to this network type.
Parame ter Description Access Point HW Address The hardware address of the wireless rou ter or access point on the network to which the HP All-in-One is connected: • (MAC address) : The unique MAC (Media Access C ontrol) hardware address of the access point.
DHCP Dynamic Host Configuration Protocol. A server on the ne twork that supplies configuration parameters to devices on the network. On small networks, this could be a router. DNS Domain Name Service. When you use the Web or send an e-mail message, you use a domain name to do it.
router A router provides a brid ge between two or more networks. A router can link a network to the Internet, link two networks and connect both to the Internet, and help secure networks through the use of firewalls and assigning dynamic addresses. A router can also act as a gatew ay, while a switch cannot.
Norway www.hp.no/faxconfig Ireland www.hp.com/ie/faxconfig France www.hp.com/fr/faxconfig Italy www.hp.com/it/faxconfig This secti on contains the fo llowing topic s: • Change se ttings on th e HP A.
For exampl e, set your answeri ng machine to a low nu mber of rings and the HP All-in-One to answer in the maximum num ber of rings. (The maximum number of rings varies by country/region.) In this setup, the answering m achine will answe r the call and the HP All- in-One will mon itor the line.
• Checks for an acti ve phone line • Tests the status of your phone line co nnection The HP All-in-One pri nts a report with the result s of the test . If the te st fails, review the report for informatio n on how to fix the prob lem and rerun the test .
Set up speed dialing You can assign speed dial entries to fax numbers you use often. This lets you dia l those numbers quickl y by using the control panel.
Update indivi dual speed dial entries You can edit the name or fa x number in a speed dial entry from the control panel or f rom your computer by using the softw are that you in stalled wit h the HP All-in-One. To update a speed dial entry fro m the control pa nel 1.
5. Press or to scroll th rough the individual speed dial e ntries you set up, and then press OK to select the approp riate entry. Repeat this step for each numbe r you want to add to the group speed dial. 6. When you a re done, press to highlight Done Selecting , and t hen press OK .
Chapter 4 68 Finish setting up the HP All-in-One Finish setup.
5 How do I? This section cont ains links to commonly pe rformed tasks, such as printing photos, scanning, ma king copies, and faxing . •“ How do I print 10 x 15 cm (4 x 6) inch borderless photos f.
Chapter 5 70 How do I? How do I?.
6 Load originals and load paper You can load many diffe rent types and sizes of paper in the HP All-in-One, in cluding letter or A4 paper, legal pap e r, phot o paper, tran sparencies, en velopes, and HP C D/DVD tattoo labels.
To load a n original in the documen t feeder tray 1. Load your original , with the pr int side up, into t he document feeder tray. Slide th e paper into t he automatic document feeder u ntil you hear a beep or see a message on the displ ay indicating that the HP All-in-One det ected the p ages you loaded.
3. Close the l id. Choose papers for printing and copying You can use different types and sizes of paper in the HP All-in-One. Review the f o llowin g recommendatio ns to get the be st printing a nd copying qu ality. Wh enever you change paper types or sizes, rem ember to change those sett ings.
One. HP Adva nced Photo Paper is marked on the non printing corners with the foll owing symbol. HP Premium I nkjet Transpa rency Film and HP Premium Pl us Inkjet Transparency Film HP Premium Inkj et Transparency Fi lm and HP Premiu m Plus Inkjet Tran sparency Film make your color presentations vivid and eve n more impressive .
HP Premium Photo Cards HP Premium Photo C ards enable you to make your own greeting cards. HP Brochur e & Flyer Paper HP Brochure & Flyer Paper (Glo ss or Matte) is glossy-coated or matte-coated on both sides for two-sided use.
• Inkjet labe ls. • HP CD/DVD tattoo labels. Load paper This section de scribes the pr ocedure for loading different types and sizes of p aper into the HP All-in-O ne for your copies or printouts. TIP: To help prevent rips, wrinkle s, and curled or bent ed ges, store all paper flat i n a resealable bag.
3. Insert the stack of p aper into the ma in input t ray with the sho r t edge forward and th e print side down. Slide the stack of p aper forward until it stops. CAUTION: Make sure that the HP All-in-One is idle and silent when you load paper into th e main input tr ay.
5. Push the main input tray ba ck into the HP All-in-One . 6. Pull the output tr ay extend er toward you , as far as it will go. NOTE: When you use legal -size paper, l eave the tray extender closed.
3. Slide the paper-le ngth and paper-wi dth guides inw ard against the stack of p hoto paper un til the gui des stop. Do not overload the p h oto t ray; make sure the stack of pho to paper fits within the photo tray and is no hig her than the top of the paper-widt h guide.
3. Slide the pa per-length an d paper-width guides inwa rd against the stack of cards u ntil the gui des stop. Do not overload the phot o tray; make sure the stack o f cards fits with in the photo tra y and is no high er than the top of the paper-widt h guide.
4. Slide the paper-w idth guide inward a gainst the st ack of envelopes u ntil it sto ps. Do not overload the main input tray; make sure t he stack of e nvelopes fits with in the main input t ray and is not high er than the top of t he paper-width guide.
HP CD/DVD Tattoo labels ▲ Place one sheet of CD/ DVD tattoo pa per in the input tray wi th the print side do wn; slide the CD/ DVD tattoo paper forward un til it stops.
7 Print from your computer The HP All-i n-One can be used wit h any softwa re applicatio n that all ows printing. You can print a range of p rojects, such a s borderless imag es, newsletters, greeting cards, iron-on transfers, and post ers.
Make the HP All-in-One the default printer You can set the HP All-i n-One as the default printer to use from all soft ware applications. This means t hat the HP All-i n-One is automatically sel ected in the print er list when you select Print from the File menu in a sof tware application .
the Size list to see if a defined paper size already exists for th e type of paper you are using. Paper type Suggested paper size settings CD/DVD tattoo paper 5 x 7 in.
To view the print resolution 1. Make sure you ha ve paper loaded in the input tr ay. 2. On the File menu in your soft ware application , click Print . 3. Make sure the HP All-in-One is the selected printer. 4. Click the butt on that open s the Propertie s dialog box.
3. Make sure the HP All -in-One is the selected printe r. 4. Click the butt on that opens t he Proper ties dialog box. Depending on your software applicati on, this button might be called Proper ties , Options , Printer Setup , Printer , or Pref erences .
4. Click the butt on that open s the Propertie s dialog box. Depending on your software application , this button might be cal led Properties , Options , Printer Setup , Printer , or Prefer ences . 5. Select the print sett ings appropriate for your project on each of the tabs in the dialog box.
This section co ntains the following topi cs: • Create printing sh ortcuts • Delete pri nting shortcuts Related topics •“ Print a borderless i mage” on page 90 •“ Print a photo on photo .
5. In the Printing Shortcuts list, click th e printing shortc ut that you want to d elete. 6. Click Delete . The print ing shortcut is remo ved from the list. NOTE: Only the shortcu ts that you have creat ed can be deleted. Th e original HP shortcuts cannot be de leted.
6. In the Size li st, click the size of ph oto paper load ed in the phot o tray. If a borderless im age can be printed on th e specified size, the Borderless printing check box is ena bled. 7. In the Paper Type drop-down list, click More , and then select t he appropriat e paper type.
NOTE: Do not leave unu sed photo paper in the i nput tray. Th e paper migh t start to curl, which could reduce the quality of your printou t. Photo paper shoul d be flat before printing .
7. In the Print Quality drop-down list, click Maximu m dpi . NOTE: To view the maximu m dpi that the HP All-in -One will p rint, click Resolution . 8. Select any other prin t settings that you want, and then click OK . Print on both side s of the page You can print two-sid ed pages with the H P All-in-One.
7. Select the bin ding edge from the Booklet layout is li st, as appropriate for your langua ge. • If your lan guage reads left -to-right, cl ick Left edge bindi ng . • If your lan guage reads right-t o-left, click Right edge binding . The Pages per sheet box is aut omatically set to two pag es per sheet.
Print multiple pag es on a single she et You can print up t o 16 pages on a single sheet of pap er. To print multiple pages on a single sheet 1. Make sure you have paper loaded in th e input tray. 2. On the F ile menu in your sof tware applicati on, click Print .
To prin t a multiple -page doc ument in re verse ord er 1. Make sure you ha ve paper loaded in the input tr ay. 2. On the File menu in your soft ware application , click Print . 3. Make sure the HP All-in-One is the selected printer. 4. Click the butt on that open s the Propertie s dialog box.
To print on tra nsparencies 1. Load the transpare ncy into the in put tray. 2. On the F ile menu in your sof tware applicati on, click Print . 3. Make sure the HP All -in-One is the selected printe r. 4. Click the butt on that opens t he Proper ties dialog box.
Print a poster You can create a po ster by print ing a document on mu ltiple page s. The HP All -in-One prints do tted lines on some pages to indicate where to trim the pages before taping them together. To print a poster 1. Make sure you ha ve paper loaded in the input tr ay.
3. Make sure the HP All -in-One is the selected printe r. 4. If your Web browser support s it, select th e items on the Web page that you want to include in the printou t. For example, in Internet Exp lorer, click the Options tab to select op tions such as As laid out on screen , Only the selected frame , and Print all linked documents .
4. Select the print j ob you want to cancel. 5. On the Docu ment menu, click Canc el Printing or Cancel , or press the Delete key on your keyboard. It can take a few moments for th e print job to be cancelled. To stop a print jo b from the comp uter (Windows Vista use r s) 1.
8 Use the photo features The HP All-in-On e is equipped wit h memory card slots a nd a front USB port that en able you to print or edit ph otos from a memory card o r storage device (such as a keychain drive, portable ha rd drive, or a digit al camera in stora ge mode) wi thout upload ing your photos to a comp uter first.
The memory card area also has a Photo light . This light blinks green when a memory card is being read or when an image i s being p rinted from a card, and st ays solid green when images are re ady to be viewed. The Pho to light is locate d near the memory card slots and is indicat ed by a camera icon.
To view a nd select photos 1. Insert a memory card into the appropriate slot on the HP All-in-One, or connect a storage device to the f ront USB port. The Photosmart Expr ess menu appears, w ith the m o st re cent photo sh own on the display. View Print Create Share Save 2.
9. (Optional) If you want to check and/or mo dify any of your print set tings, press to highligh t Settings and press OK . 10. To print the ph oto(s), use or to highlight Print Now and press OK (or press Print Photos on the co ntrol panel ). A print status screen disp lays the number of pages to pri nt and the estimated time to complete.
2. Load up to 10 x 15 cm (4 x 6 inch) paper in th e photo tray or ful l-size photo paper in the main tray. 3. Press until Print is highlighted, an d then press OK . The Layou t screen appears. 4. Press or to scroll through the l a yout options, and press OK when the opti on you want is highlighted: 4x6 5x7 The Select Photo s screen app ears.
To create sp ecial proj ects 1. Insert a memory card i nto the appropria te slot on the HP Al l-in-One, or conn ect a storage devi ce to t he front USB port. The Photosmart Express menu app ears, with the most recent photo shown on the display. View Print Create Shar e Save 2.
5. Respond to the p rompts for the project yo u are creating. 6. At the Print Preview screen, highlig ht Print Now , and then press OK . A print status screen displays the number of pages t o print and the estimat ed time to complete.
6. Press or to continue scrolling t hrough and select ing photos, and the n press OK . The Share Options screen appea rs. 7. Press or to high light Share , and then press OK . If the HP All-i n-One is network-co nnected, a list of available com puters appears.
2. Press until Save is highligh ted, and then press OK . If the HP All-in-On e is network-connected , a list o f available comp uters appears. Select the comput er to which you want to transfer the phot os, and then cont inue to the next step.
7. Use or to highlight Crop , and then pre ss OK . The Crop screen ap pears. 8. Press Zoom In or Zoom Out to zoom closer to or farth er away from the su bject of the photo. An outline a ppears on the photo t o show you an approximate view of the area that will print.
To adjust the br ightness 1. Insert a memory card into the appropriate slot on the HP All-in-One, or connect a storage device to the f ront USB port. The Photosmart Expr ess menu appears, w ith the m o st re cent photo sh own on the display. 2. With View highlighted, press OK .
7. Use or to highlight Color Effect , and then press OK . The Col o r Effect men u appears. 8. Use or to select one of the following color e ffect options, and th en press OK : No Effect Does not apply any special color effects to your photo. Black & White Prints the photo in black and white.
You can turn off the automatic pho to enhancemen t feature for ind ividual photos , on a per- image basis . To turn off auto matic photo enhancemen t 1. Insert a memory card into the appropriate slot on the HP All-in-One, or connect a storage device to the f ront USB port.
Chapter 8 114 Use the photo features Photos.
9 Use the scan features Scanning is the proce ss of convertin g text and pictures into an electronic format fo r your computer. You can scan almost anything (pho tos, magazine articles, film n egatives, slides, and te xt documents) on the H P All-in-One.
To reprint an original photo 1. Press Reprints for the Scan and Rep rint option. NOTE: You can also press Scan Menu on the cont rol panel for the Sc an and Reprint option. NOTE: Depending on the paper size you choose, you can place the photo pap er in the photo tray or the main input tray.
look for the HP All-in-One icon in the system tray at the lower ri ght side of the screen, near the time. NOTE: Closing th e HP Digital Imaging Mon i tor icon in the Windows system tray can cause the H P All-in-One t o lose some of its scan fun ctionality.
you to use the phot o print options to print borderl ess prints and album pag es from the scanned i mage. NOTE: If the HP All-in-One is connect ed to a network, you can access the scanned image only if the card or device is being shared acro ss the network.
correctly is important if you want to obt ain the best results. Do not expect scanned text documents to be letter-per fect the first tim e you use your OCR software.
Chapter 9 120 Use the scan features Scan.
10 Use the copy features The HP All-in-O ne enables you to produ ce high-qualit y color and black-an d-white copies on a variety of paper types, includi ng transparencie s.
To preview your co py from the contro l panel 1. Press Copy Menu . The Copy Menu appears. 2. Change copy sett ings on the HP All-in-One to accurately refl ect the copy you want to make . 3. Press to highligh t Preview , and then press OK . An image on the di splay shows how your copy w ill print.
To set the pap e r size fr om the control panel 1. Press Copy Menu . The Copy Menu appears. 2. Press to highlig ht Paper Size , and th en press OK . The Paper Size menu ap pears.
3. Press until the appr opriate pap er type appears. Refer to th e following tabl e to determine which paper type sett ing to choose based on the pape r loaded in t he input tray.
• Normal delivers high quality and is th e recommended setting for most of yo ur copying. Normal copies f aster than Best and is the def ault setting. • Fast copies faster than the Normal setting. The text is compa rable to the quality of the Normal setti ng, but the graphics mig ht be lower quality.
NOTE: The settings you spe cify here are only saved on th e HP All-in-One. They do not adjust the set tings in the soft ware. You can save your mo st frequently used settings by using the software th at you installe d with the HP All-in-One.
Related topics •“ Load 10 x 15 cm (4 x 6 inch) photo pap er” on page 78 •“ Set the copy pa per type” on page 123 Resize an origina l to fit onto letter or A4 pa per You can use the Fit to Page fea ture to copy an original to fit within the printabl e margins of a page wit hout the risk of cropping some part of your original.
4. Press to highligh t Size , and then press OK . The Size menu app ears. 5. Press to highligh t Custom 100% , an d then press OK . The Cus tom 100% menu appears. 6. Use the keyp ad or press or to select a percentage to reduce or en large the copy . (The minimum and maximum percenta ge to resize a copy varies b y model.
Improve the quality of a copy You can use the Enhanc ements feature to adjust the quali ty of text documents by sharpening edg es of black text or adjust photograph s by enhancing light colors t hat might otherwi se appear white. The Mixed enhancem ent is the default optio n.
Chapter 10 130 Use the copy features Copy.
11 Use the fax features You can use the H P All-in-One to send and receive faxes, inclu ding color faxe s. You can set up speed dial entri es to send faxes quickly and easil y to frequently u sed numbers.
TIP: You can also send a fax man ually from a phon e or by using mo nitor diali ng. These feature s allow you to con trol the pace of your dialin g. They are also useful when you want to use a cal ling card to charge the call and you n eed to respond to tone pro mpts while dialing.
To send a fax using spe ed dials from the control p a nel 1. Load your originals pr int side up into t he document feede r tray. If you are sending a single-page f ax, such as a photogra ph, you can also load yo ur original print side d own on the glass.
To send a fax manuall y from a connected phone 1. Load your origi nals print side up in to the docum ent feeder t ray. NOTE: This feature is not supported if you load your originals on the glass. You must load your origi nals in the document f eeder tray.
Scan a fax to se nd from memory You can scan a black-and-white fa x into memory and then send the fax from memory. This feature is u seful if the fax num ber you are trying to re ach is busy or temporarily unavailable. Th e HP All-in-One scans t he originals into memory and sends t hem once it is able to connect to t he receiving fax machine.
To cancel a s cheduled fax 1. Press the Fax Menu button twice to advance to the Fax Men u . 2. Press to highligh t Send Fax Later and then p ress OK . The F ax Is Scheduled screen appears.
To send a color fa x from the control pane l 1. Load your originals pr int side up into t he document feede r tray. If you are sending a single-page f ax, such as a photogra ph, you can also load yo ur original print side d own on the glass. NOTE: If you are sending a mult iple-page fax, you must load the originals in the document fee der tray.
The follow ing resolution sett ings are avail able for sending f axes: Fine , Very Fi ne , Photo , and Standard . • Fine : provi des high-qual ity text suitable for faxin g most documents. This is the default setting. When se nding faxes in col or, the HP All-in-One always uses the Fine setting.
To chang e the Lighter/Darker setting from th e control pa nel 1. Press Fax Menu . The Enter Fa x Number screen a ppears. 2. Enter the fax nu mber by using the ke ypad, press to redial the last number dialed, or press to access speed dials. 3. Press Fax Menu aga in.
To change the ECM setting from the co ntrol panel 1. Press Setup . 2. Press to highligh t Advanced Fax Setup , and then press OK . The Advanced Fax Setup menu appears. 3. Press to highligh t Error Correction Mo de , and th en press OK . The Error Correction Mode menu appe ars.
To receive a fax manually 1. Make sure the HP Al l-in-One is turned on and you have paper loaded in t h e in put tray. 2. Remove any origin als from the document feeder tray. 3. Set the Rings to Answer set ting to a high number t o allow yo u to answer th e incoming call before the HP All-in-One answer s.
NOTE: If Backup Fax Reception is enabled and you turn off the HP All-in-One, all faxes stored in memory are delete d, including any unprin ted faxes that you m i ght have received whil e the HP All-in-O ne was in an error conditio n. You will need to contact the senders to ask them to resend any unprinte d faxes.
To reprint all faxes in memory ▲ Press to highlig ht All faxes in m e mor y , and then press OK . 6. If you want to stop reprinting the faxes in memory, press Cancel . To delete all the faxes in me mory from the co ntrol panel 1. Press Setup . 2. Press to highlig ht Tools , and then press OK .
To forward fax es from the contro l panel 1. Press Setup . 2. Press to highligh t Advanced Fax Setup , and then press OK . The Advanced Fax Setup menu appears. 3. Press to highligh t Fax Fo rwarding , and then press OK . The F ax Forwarding m enu appears.
from printing faxe s on photo or transpa rency paper left i n the input tray f rom a previous job. If you have plain paper loaded and the HP All-in-One is erroneo usly detecting your pa per as a type ot her than plain, you can cha nge the Paper Checking setting, so this detection does not take place before printing faxes.
NOTE: This feature is no t supported in all countries/re gions. If it is no t supported in your countr y/region, Junk Fax Blocker Set Up does not appear i n the Basic Fax Setup menu. Set the junk fax mode By defaul t, Block Junk Fax mode is turned On .
3. Press to highlig ht Junk Fax Blocker Set Up , and then press OK . The Junk F ax Blocker menu appears. 4. Press to highlig ht Add number to Junk List , and then press OK . The How to Add menu appe ars. 5. Press to highlig ht Enter new nu mber , and then press OK .
use a slower f a x speed. You can do thi s by changing the Fax Speed setting from Fa st (33600 ) (the default) to Medium (1 4400) . You should also check with your t elephone company to make su re their Internet phone service supports faxi ng.
12 Print reports and forms The HP All-i n-One enables you to p rint reports and to control w hen reports are printed automatically. You ca n also print forms such as ruled papers and checkli s ts.
the color blocks continue to show print qua lity problems after clea ning and aligning , contact HP support. • Bluetooth information : lists the setti ngs for the opti onal Bluetoo th device. • History lo g : contains informat ion that might be used for diagn ostic purposes if you need to call H P support.
3. Press to highlig ht Fax Confirmati on , and then press OK . 4. Press to select one of t he following , and th en press OK . Off Does not print a fax confirmation report when yo u send and receive faxes successfully. This is the default setting. On Fax Send Prints a fax confirmation report for every fax you send .
To clear the fax log from memory 1. Press Setup . 2. Press to highligh t Tools , and then pr ess OK . The T ools menu appea rs. 3. Press to highligh t Clear Fax Log , and th en press OK . The fax log an d any faxes tha t might have bee n stored in memory are deleted.
the format your phone provider use s to transmit caller ID information, might include the name of the sender. NOTE: This feature is not supported in all countries/regions. If it is not supported in your country/region, Caller ID Report does not appear in the Print Re port menu.
Chapter 12 154 Print reports and forms Print reports and forms.
13 Maintain the HP All-in-One The HP All- in-One requi res little mainte nance. Sometimes yo u might want to clea n the glass and lid backing to remove surface dust and ensure that your copies an d scans remain clear. You will also need to repla ce ink cartridges, clean the pri nt head asse mbly, or align the pri nter from time to ti me.
To clean th e glass 1. Turn off the HP All-in-One, and raise the li d. 2. Clean the gla ss with a soft cloth or sponge sli ghtly moistene d with a nonabrasive glass cleaner. CAUTION: Do not use abrasive s, acetone, benzene, or carbon tetrachlorid e on the glas s, since they can d amage it.
5. Lower the autom atic document feeder mech anism, and then clos e the cover of the automatic docum ent feeder. 6. Turn on the HP All-in-One. Clean the lid ba cking Minor debris can accumu late on the white docu ment backing loca ted underneat h the lid of the HP All-in -One.
To check the ink l evels from the contr ol panel 1. Press Setup . 2. Press to highligh t Tools , and then pr ess OK . 3. Press to highligh t Display Ink Gauge , and then pres s OK . The HP All-in-O ne displays a gauge that shows the estimat ed ink levels of all cartridges inst alled.
Replace the ink car tridges Follow these in structions when you need to rep lace ink cartridges. NOTE: If you are install ing ink cartridges in the H P All-in-One for the first tim e, be sure to use only the ink cartridg es that came with the d e vice.
If you are replac ing one of the five colo r ink cartridges, such as yellow, light cyan (blue), cyan, li ght magenta (pink), or magenta, lift t h e appropri ate latch in th e center area. 1 Ink cartridge latch for the black ink cartridge 2 Ink cartridge latches for the color ink ca rtridges 4.
5. Remove the new ink cartrid ge from its packaging, a nd then, holdi ng it by the hand le, push the ink cartri dge into the e mpty slot . Match the color and pa ttern of the ink ca rtridge to the color an d pattern on the pri nt carriage. 6. Close the latch a nd make sure it is secure.
maintenan ce to ensure excellent p rint quality. You might wa nt to use t his feature w hen the self-test re port shows streaking or w hite lines through any of t he blocks of color. If you still h ave print quali ty problem s after align ing the printe r, try cleaning t he print head.
To clean the print he ad from the control panel 1. Load lette r or A4 unused plain whi te paper into the input t ray. 2. Press Setup . 3. Press to highlig ht Tools , and then press OK . 4. Press to highlig ht Clean Pri nthead , and then press OK . The HP All-in-One cleans the print head and prints a page t hat you can recycle or discard.
To clean the ink cartridg e contacts 1. Make sure the HP All- in-One is turned on . 2. Lift the in k cartridge do or. 3. Squeeze the bot tom of the lat c h below the ink cartridge you want to clean, and then lift the latch. NOTE: Do not remove multiple ink cartri dges at the same time.
Surface Remedy Color fabric Wash the fabric in cold water and use sudsy ammonia. CAUTION: Always use cold water to remove ink f rom fabric. Warm or h ot water can set the ink into th e fabric.
Chapter 13 166 Maintain the HP All-in-One Maintain the HP All-in-One.
14 Shop for ink supplies For a list of ink cart ridge numbers, see the pri n ted docume ntation that came with the HP All-in-O ne. You can a l so us e the sof tware that came wi th the HP All-in-One to find out the re order number for all the ink cartridges.
Chapter 14 168 Shop for ink supplies Shop for ink supplies.
15 Troubleshooting This section co ntains the following topi cs: • Troubleshoot ing tips • Hardware set up troubleshooti n g • Software in stallation troubleshoot ing • Network t roubleshootin.
sure the other e nd of the USB cable is plugged in to a USB port on your com puter. After the cable is connected properly, t urn the HP All-in-One off and the n on again. • If you are conn ecting the HP All-in-One thro ugh a USB hub, make sure the hub i s turned o n.
• Do not clean the print head unnecessari ly. This wast es ink and shortens th e life of the cartridges. • Handle ink cartridg es carefully. Dropping , jarring, or rough handl ing during installatio n can cause temp orary printing prob lems. Informat ion on paper The HP All-in-On e is designed to work we ll with most paper types.
Paper can a lso jam in th e automatic docu ment feeder. Se veral common actions can cause paper t o jam the automat ic document feede r: • Placing too mu ch paper in the document feeder tray. The aut omatic document feeder can hold up to 50 sheets of letter or A4 paper, or 35 sheets of legal paper.
To clear a paper jam in the automati c document feeder CAUTION: Do not lift the lid of t he HP All-in-O ne and try to rem ove the jammed document fr om the glass. Yo u might damag e your original do cument. 1. Remove all ori ginals from the document feed er tray.
cover to access the pick assembly inside the automatic d ocument f eeder, clean t he rollers or separator pad, and then close the cover. To clean the rollers or separator pad 1. Remove al l originals from the document feeder tr ay. 2. Lift the auto matic document f eeder cover.
This section co ntains the following topi cs: • The HP All-i n-One will not t u rn on • I connected the U SB cable, but I am having problems using the HP All-in-One w ith my computer • The displ.
• Test the pow er outlet to make su re it is working. Plug in an ap pliance that you know works, and see i f the applian ce has power. If n ot, then the re might be a problem with t he power o u tlet . • If you plugge d the HP All-in-One into a switched outlet , make sure the sw itch is on.
For more informati on on installing t he software and con necting the USB cable, see the Setup Guide that came with the HP All -in-One. The display sh ows the wrong language Cause: You migh t have selected the incorrect languag e when settin g up the HP All- in-One.
Solution: Check th at the ink cartridges are instal led properly and ha ve ink. For more information, see: “ Work with ink cart ridges” on page 158 Cause: The HP All-in-One migh t not be turned on. Solution: Look a t the display on the HP All-in-One.
Cause: The print he ad assembly is blocke d. Solution: There might be some packing material inside the H P All-in-One. Turn the HP All-in-One of f and open the ink cartridge door. Remove any objects t hat are blocking the print head assembly (including any packing materi als), and t hen turn th e HP All-in-One o n again.
Solution: Ch eck that the HP All-in-One is turned on, and then try the usb connecti on again. To retry the us b connection 1. Unplug t he HP All-in-One pow e r cord, an d then plug it in again. 2. Verify that th e USB cable and power cord are p lugged in.
The registra tion screen does not app ear Cause: The re gistration screen did not launch aut omatically. Solution: You can access the registrat ion (Sign up now) screen f rom the Windows taskbar by clicking Start , pointing to Programs or All Programs , HP , Photosmart C7200 All -in-One seri es , and then clicking Product Registration .
4. Disconnect th e HP All-in-One from your co mputer. 5. Restart your computer. NOTE: It is important that you disconn ect the HP All-in-On e before restarting your computer. Do not connect the H P All-in-One to yo ur computer unti l after you have reinstalle d the software.
Solution: Turn the compu ter on. Cause: The H P All-in-One is not pr operly connected to the computer. Solution: Check the connecti on from the HP All-in-One to you r computer. Verify that the USB cable is secu rely plugged into the USB port on the back of the HP All- in-One.
Solution: Ch eck the following cabl es to ens ur e they are connected properly. • Cables bet ween the HP All-in-One and the hub or router • Cables bet ween the hub or router and your computer • .
Solution: Turn off the HP All-in-One, the computer, and the router. Wait 30 seconds. Turn on the rout er first, and then turn on the HP All-in-One and the computer. Cause: The H P All-in-One and comp uter are not conn ected to the same ne twork. Solution: Try accessing the Embedded Web Server on th e HP All-in-One.
software. You can re-enable your firewall applicatio n after inst allation is com plete. If you still see firew all pop-up messages, yo u must always accept or allow the po p-up messages. For more info rmation, see the documentation provided wi th the firewall s oftware.
bit. Assumin g the equipme nt is functioni ng properly, t ry doing the follow ing things separately or in com bination: • If there is a lo ng distance between yo ur computer or wireless rout er and the HP All-in -One, move th em closer toge ther.
on how to turn on the wi reless router, se e the docume ntation that came with your wireless rout er. Cause: The HP All-in-One is not receiving a signa l. Solution: Move t he wireless router and the HP All-in-One closer together. Then run the wirele ss setup again .
Solution: Run the wirele ss setup process again and enter the correct passp hrase. The passphra se is case-sensitive. The Printer No t Found screen appears durin g installation Cause: A firew all, anti-virus, or anti -spyware appli cation is preven ting the HP Al l- in-One from accessing your computer.
If the self-t est report shows a de fect, try the follo w ing: • Clean the ink cartri dges automatically. For more informat ion, see “ Clean the print head” on page 162 . • If you are m issing lines when you print, clean the electrical co ntacts.
If prompt ed, choose your co untry/reg ion, and the n click Co ntact HP for information on calling for te chnical support. For more information, see: •“ Clean the print head” on page 162 •“ Print a self-test report” on page 149 •“ Align the p rinter” on page 161 Cause: The pa per is too close to t he print hea d.
Cause: The copy or print paper type se tting is in correct. Solution: Loa d high-quality pap er in the input tray and print the image with a high print qu ality sett ing, such as Best , Max imum dpi , or High Reso lution . Always make sure the pa per you are print ing on is flat.
The printout has a horizonta l band of distortio n near the bottom of the pa ge Cause: Your im age has light blue, gray, or brow n hues that pri nt near the bot tom of the page. Solution: Load high-q uality paper in the inp ut tray and print the ima ge with a high print quality sett ing, such as Best , Maximum dpi , or High Reso lution .
Solution: Cl ean the print head , and then print a self-t est report. Che ck the color blocks in the report for any problems. If the color blocks show print quality problems, perform a printer al ignment. If the problem p ersists after cleaning a nd aligning, con tact HP support f or help.
Cause: The pri nt head needs t o be cleaned. Solution: Clean the print he ad, and then print a self-test rep ort. Check the color blocks in the report for any pr oblems. If the color blocks show print quality problems, perform a p rinter align ment. If the problem pe rsists after cleaning and aligni ng, contact HP support for help .
Solution: Ch ange the Paper Type sett ing to match the typ e of paper loade d in the input tray. For more information, see: •“ Set the copy paper type ” on page 123 •“ Set the paper ty pe for printing” on pa ge 85 Cause: Copying a poor-qualit y picture, such as a newspaper photo, causes bands, checks, or stripes to appear on your copy.
Solution: Change the Paper T ype setting to match the type of paper lo aded in the input tr ay. For more information, see: •“ Set the copy paper ty pe” on page 123 •“ Set the paper type fo r printing” on page 85 Cause: The cop y or print pape r type setting is incorrect.
Solution: Make su re the paper is loaded corre ctly. For more information, see: “ Load full-size pap er” on page 76 Cause: More than one type of pape r is loaded in the input tray. Solution: Loa d only one type of paper at a time. Cause: The original might have been loaded inco rrectly into the send ing fax machine.
The print quality of the fax I received is poo r Cause: The ph one line conne ction is noisy. Phone lin es with poor sou nd quality (noise) can cause print quality proble ms. Solution: If the failu re was due to noi se on the phone lin e, contact the sen der to have them resend the f ax.
Solution: If t he paper you are using is too fibrous, the ink applied by the HP All -in- One might not fully cove r the surface of the pap er. Use HP Premium Papers or a ny other paper type th at is appropriat e for the HP All-in -One. Cause: The print head ne eds to be cleane d.
Cause: The w rong type of envel ope is load ed. Solution: Do not use shi ny or embossed en velopes or envelopes that have clasps or windows. Borderles s printing produc es unexpected results Cause: Printin g a borderless image from a non-HP softw a re ap plication p roduces unexpected results.
Cause: The HP All-in-One is out of paper. Solution: Loa d paper in the inpu t tray. For more information, see: “ Load pap er” on page 76 Cause: The print head assemb ly has stalled. Solution: Turn the HP All- in-One off a nd open the ink cartridg e door.
Cause: The sta tus of the printer dri ver has changed. Solution: The print er driver status might ha ve changed to either offline or stop printing . To check the pr inter driver statu s 1. In the HP Solution Center, click the device tab. 2. Click Settings .
Some document s take a long time to print. If nothing has pr inted several mi nutes afte r you sent a print job to the HP All-in-On e, check your computer to see if th ere are any messages. Cause: The HP All-in-One is not the sele cted printer. Solution: Make sure the HP All-in-One i s th e selected printer in your software application .
Solution: Turn the HP All-in-One off and open the in k cartridge door. Remo ve any objects that are b l ocking th e print head assembly (inclu ding any packing materials), and then turn the HP All-in-One on again. Cause: The H P All-in-One is o ut of paper.
Solution: Remove the stack of pape r from the i nput tray, reload the paper, and then slide the pa per width guide i nward until it st ops at the edge of the pape r. For more information, see: “ Load pap er” on page 76 Cause: A stack of en velopes is loaded incorrectly.
Solution: Make sure the layou t of the docum ent you are t rying to prin t fits on a paper size supporte d by the HP All -in-One. To preview the print layout 1. Load the correct pape r size into the input tray. 2. Preview your print job before se nding it to the HP All-in -One.
Solution: Firmly insert the Two-sided pri nting accessory into the back of the device until both si des snap into pl ace. NOTE: Do not press the but tons on either side of the accessory when installing it. Use the but tons only when removing the accessory fro m the device.
After the mem ory card has been in serted properly, th e Photo light wi ll blink for a few seconds, and then re main lit. Cause: The me mory card or storage device is not fully inse rted. Solution: Make sure you fully inse rt the memory card into the ap propriate slot on the HP All-in-One.
are on the right (an d facing th e device), and then push th e card forward into the appropriate slot until the Photo lig ht turns on. If the problem con tinues, the memory card might be defective . Cause: You have inserted more t han one memory card, or you have an inserted a memory card and a sto rage device at the same time.
If the HP All-in-On e is network-connect ed, check physical netw ork connections an d make sure the netw ork is operational . Once you verify network conn ectivity, retry the task.
HP All-in-One. T h is lets yo u read/write files on the network from the memory card o r storage device i n the HP All-in-On e . The C IFS server appears on your computer as a network d rive. In addit ion to reading/writing files from your memory card or storage device, you can also create folders and store o ther information.
• Text is incorrect or missing • The scan feature doe s not work Scan halts Cause: The computer system resources might be low. Solution: Turn off the HP Al l-in-One and t hen turn it back on. Tu rn off the com puter and then turn i t back on. If this does not wo rk, try changing t he scan to a lower resoluti on.
Solution: Load your orig inal print side down on the right front corner of th e glass. Scanned ima ge is incorre ctly cropped Cause: The software is set to automatically crop scanned pict ures. Solution: The Autocrop fea ture crops anything that is n ot part of the mai n image.
Cause: Debri s might be st uck on the gla ss or on the b a ck of the document lid. This can cause poor-quality scans. Solution: Clean the gla ss and lid backing.
Copies ar e too light or too dark Cause: The Lighter/Darker setting for the HP All-in-One is set too light or too dark. Solution: Adju st the light ness and darkness of the copies. For more information, see: “ Adjust the light ness and darkness of your copy” on page 12 5 Cause: The original you are copying is overexposed.
Solution: Reload the ori ginal on the glass. For more information, see: “ Load o riginals” on page 71 Cause: The ori ginal fills the entire sh eet.
A borderl ess copy has wh ite space arou nd the edges Cause: You are trying to make a borderless copy of an ori g inal that is too sm all. Solution: When you make a bo rderless copy of a small orig inal, the HP All-in-O ne enlarges the original up to a maximum pe rcentage.
The prin tout is blank Cause: The ori ginal is placed inco rrectly on the glass. Solution: Reload the ori ginal on the glass. For more information, see: “ Load o riginals” on page 71 Fax troublesh.
Solution: Look a t the display on the HP All-in-One. If the display is blank an d the On butto n is not lit, the HP All-in-One is turn ed off. Make sure the po wer cord is firmly connected to the HP All-in-One an d plugged into a power out let. Press the On button to turn on t he HP All-i n-One.
If you used a 4-w ire phone cord, disconn ect it, find the sup plied 2-wire p hone cord, and then con nect the 2-wi re phone cord to the port labeled 1-LINE on the back of the HP All-in-One .
Use the port labeled 1-L INE on the back of the HP All-in-One to co nnect to the telephone w all jack. Use th e 2-EXT port to connect to a ny other equipment, such as an answerin g machine or a tel ephone, as sh own below.
If you are still havi ng problems faxing, set th e Fax Speed to a slower rate such as Medium (14400 ) or Slow (9600) . For more information, see: •“ Send a fax in Error Co rrection Mod e” on page 139 •“ Set the fax speed ” on page 30 Cause: Other e quipment that uses th e same phone li ne as the HP All-in-One might be in use.
Solution: • Make sure the HP All-in -One is connected to the port that is designated f o r fax and phone use. Also, make sure that the termina l adapter is set to the correct switch type for your c ountry/region, if possib le. NOTE: Some ISDN syst ems allow you t o configure the p orts for specific phone eq uipment.
You can check t he sound quality of the ph one line by plug ging a phone i nto the telephone wall jack and liste ning for static or other noise. If you hear noise, do the following 1. Turn off your DSL modem a nd completely remo ve power for at lea st 15 minutes.
You can also send t he fax using moni tor dialing. This ena bles you to listen to the phone line as you dial. You can set the pace of your dialing and respond to prom pts as you dial.
Solution: NOTE: This possibl e solution applie s only in th e countries/regi ons that receive a 2-wire phon e cord in the box with the HP All-in -One, including : Argentina, Australia, Brazil, C anada.
Pages of a fax I sent are mi ssing Cause: Two or more pages were fed th rough the do cument feeder t ray at the same time. Solution: Print a Last Tr ansaction report to verify the numb er of pages that were sent.
If the print quali ty is still poor, turn off ECM, and then contact your tel ephone provider. For more information, see: “ Send a fax i n Error Correction Mode” on page 139 Cause: The fax resol ution sett ing is set to a low resolution, such as Standard .
The fax I sent was bla nk when it was re ceived Cause: The original was not loa ded or was load ed incorrectly. Solution: Load your orig inals print side up into the do cument feeder tray. I f you are sending a si ngle-page fax, such as a photograph, you can also load your original print side down on the g l ass.
connected, or a voice mail service could be interfer ing with the recip ient's phone line . You can also ask the recipient to check the receiving fax machine for any problems. Cause: The Fax Speed option is set to a slow transmission speed. Solution: Make sure the Fax Spee d option is set to Fast (33600) or M edium (14400) .
For more info rmation on ho w to set up the HP All-in-One whe n you ha ve a voice mail service, see the pri n ted d ocumentation tha t came with the H P All-in-One. Cause: You have a computer dial-u p modem on the same phone line as the HP All- in-One.
labeled 2-EXT , as shown be low. You also need to set the correct number of ring s to answer for both the answering machin e and HP All-in-One. 1 Telephone wall jack 2 Connect to the IN port on the an.
Distinctive R ing setting on the HP Al l-in-One is set to ma tch. For example, if the phone compan y has assigned your nu mber a doubl e ring patt ern, make sure Do uble Rings is selected as the Distinctive Ring sett ing.
• The ink cartridg e door is open. C lose the ink cart ridge door, as shown be low: • The print he ad assembly is stal led. Turn the H P All-in-One off , remove any objects that are blocking the pr int head assembly (including any packing materials), and then turn the HP All-in-One on again.
documents loa ded in the documen t feeder tray. Remove any original s before manually receiving faxes. You can also contact th e sender to verify that t here are document s loaded in the sending fax machine. Cause: The Fax Speed setting might be set too fast.
When you have an answerin g machine on the same phone li ne you use for fax calls, you must conn ect the answ ering machine di rectly to the HP All-in -One using the port labeled 2 -EXT, as shown below.
Cause: The HP All-in-One is set up to receive faxes manu ally, which means that the HP All- in-One will not answer incomi ng calls. You m ust be availabl e to respond in person to incomi ng fax calls, or t he HP All-in-One will not receive the fax and your answering machine w ill record the fa x tones.
NOTE: The HP All-in-O ne cannot recognize some ring patterns, such as those with altern ating short and long rin ging patterns. If you are having problems with a ring pattern of this ty pe, ask your phone company to a ssign a non-alternat ing ring pattern.
Resolve any probl ems found. To clea r the memory, you can eit her print or del ete the faxes stored in memory. For more information, see: “ Reprint received faxes from memory” on pa ge 142 Cause: An error condition is preventing th e HP All-in-One from receivi ng faxes and Backup Fax Rece ption is set to Off .
paper in t he input tra y, the HP All-i n-One automatically begins print i ng a ll the unprinted faxe s from memory, in the order they were received. If you do not have Backup F ax Receptio n enabled, or if the fax wa s not stored in memory for so me reason (for example, i f the HP All-in-One was ou t of memory), ask the sende r to resend the fa x.
Solution: Check w ith the sender to see i f the sending fax mach ine is having problems. Cause: The fax originated on a larger pape r size, such as legal , and the Automatic Reduction option is turned off.
NOTE: This possibl e solution applie s only in th e countries/regi ons that receive a 2-wire phon e cord in the box with the HP All-in -One, including : Argentina, Australia, Brazil, C anada, Chile, C.
To set up the HP All-in-One to a computer with one phone port 1. Find the phone cord that connects f rom the back of your compu ter (your computer dial-up modem) to a tel ephone wall jack. Disconne ct the cord from the tele phone wall jack a nd plug it int o the port labeled 2-EXT on the ba ck of the HP Al l-in-One.
splitter, or a para llel splitter which has two RJ-11 ports on the front and a p lug on the back.) NOTE: This possibl e solution applie s only in th e countries/regi ons that receive a 2-wire phon e c.
To set up the HP All-in-One to a computer with one phone port 1. Find the phone cord that connects f rom the back of your compu ter (your computer dial-up modem) to a tel ephone wall jack. Disconne ct the cord from the tele phone wall jack a nd plug it int o the port labeled 2-EXT on the ba ck of the HP Al l-in-One.
Cause: I am setting up the HP All-i n-One on a shar ed voice/fax l ine with a com puter dial-up mode m and voice mail servic e, and the comput er has only on e phone port . Solution: If your compu ter has only one ph one port, you wi ll need to pu rchase a parallel splitt er (also called a coupler).
To set up the HP All-in-One to a computer with one phone port 1. Find the phone cord that connects f rom the back of your compu ter (your computer dial-up modem) to a tel ephone wall jack. Disconne ct the cord from the tele phone wall jack a nd plug it int o the port labeled 2-EXT on the ba ck of the HP Al l-in-One.
to the port labeled 1-LI NE on the back o f the HP All-i n-One and to your te lephone wall jack, as shown be low. 1 Telephone wall jack 2 Use the phone cord supplied in the box with the HP All-in-One This special 2-wire phone cord is different from the more com mon 4-wire phone cords you might already have in your o ffice.
Try removing t he splitter and connecti ng the HP All- in-One di rectly to the telephone wall jac k. Cause: You are not using a proper g rounded powe r outlet for th e HP All-i n-One.
Solution: What to do • Turn off the H P All-in-One by using the On button l ocated on the control panel and then unplug the power cord from the back of the H P All-in-One. After a few seconds, plug th e power cord ba ck in and turn the power on. Run th e test again.
1-LINE on th e back of the HP All-in-One. For mo re information on setting up t he HP All-in-One f or faxing, see the print ed documentati on. 1 Telephone wall jack 2 Use the phone cord supplied in th e box with the H P All-in-One • If you are us ing a phone splitt er, this can cause faxing prob lems.
1 Telephone wall jack 2 Use the phone cord supplied in the box with the HP All-in-One 2. After you have connecte d the phone cord to th e port labeled 1-LI NE, run the fax test again to make sure i t passes and the HP All-in-O ne is ready fo r faxing.
• Check the conn ection between the telephone wall jack and th e HP All-in-On e to make sure the phone c ord is secure. Cause: The "Fax Line Co ndition" test fail ed. Solution: What to d o • Make sure you connect the HP All-in-One to an a nalog phone line o r you will not be able to send or recei ve faxes.
Solution: What to do • Other equipm ent, which use s the same phon e line as the HP All-in-One, might be causing the test to fa il. To find out if other equi pment is causing a prob lem, disconnect everyt hing except the HP All- in-One from the phone l ine, and then run the test again.
• Check to make sure the country/region setti ng is set appropria tely for your country/region. If the country/region se tting is not set or is se t incorrectly, the test might fail and you might have problems sendin g and receiving faxes.
are specific to Error Correction Mode (ECM). If the same error app ears repeatedly, try turning off ECM. Error code Error definition (223 Error Correction Mode ) 224 One or more received pages might not be re adable. 225-231 There is a feature incompatibility with the sendin g fax machine.
Error code Error de finition (338-342 Error Correction Mode ) 343 344-348 (349-353 Error Correction Mode ) 354-355 The telephone connection was lo st. 356-361 (362-366 Error Correction Mode ) The receiving fax machine prematurely ended the session.
• Scanner failure • Photo tray problem • Photo tray cannot engage • Photo tray cannot disengage • Two-sided printing a ccessory is missing Automatic document feed er fail ed to load Cause: The au tomatic docu ment feeder di d not work properly , and the job did not finish.
Memory is full Cause: While receiving a fax, the HP All-in-One jamm ed with paper or ran out of paper. Solution: If t he HP All-in-One supports fa xing and you h a ve Backup Fa x Reception enabled, the HP All-in-One might ha ve stored the fax in memory upon recepti on.
Solution: Do not overload the pho to tray; m ake sure the stack of photo paper fits within the ph oto tray and is no higher than the top of the pape r-width guide. Cause: Two or more pieces of paper might be stuck together. Solution: Remove the pape r from the photo tray and shuff le the paper so it does not stick toget her.
• File format not supported • Invalid f ile name • Supported file t ypes for the HP All-in-One • File corrupted Error re ading or writing the file Cause: The HP All-in-One softw a re could no t open or save the file. Solution: Check to see if you typed the correct fo lder and file name.
Solution: Open the f ile in another appli cation, and sa ve it in a format that the HP All- in-One softwa re recognizes. For more information, see: “ Supported file typ es for the HP All-in-O ne” on page 263 Invalid fil e name Cause: The fi le name you ent ered is invalid.
• No scan options • Out of disk space • Memory card must be in slot • Card access error • Use only one card at a ti me • Card is inserted incorrectly • Card is not fully in serted • Ca.
Disconnected Cause: Several sit uations can cause this error message to appear. • Your comput er is not turned on. • Your compute r is not connected to the HP All-in-O ne. • The softwa re that came wi th the HP All-in -One was not i nstalled correc tly.
Solution: Remove the memory ca rd and reinsert it co rrectly. The fro nt label of t h e Compac t Flash card f aces left. Cause: You have not fully inserted t he memory card. Solution: Remove the memory card and reinsert it in the memory card slo t until it stops.
Solution: Reformat your memory card in your camera or format your memory card in a Windows XP compute r by selecting the FAT format. Cause: The file system is corrupted. Solution: Check the display for an e rror message tellin g you that the images on th e memory card are corrupted.
Cannot load paper from in put tray Cause: There is not enough pa per in the inpu t tray. Solution: If the HP All-in-O ne is out of pape r or there a re only a few sh eets remaining, l oad more paper in the input tray.
For more information, see: “ Clear paper jam s” on page 171 Cause: The print he ad assembly is blocke d. Solution: Turn the HP All-in-One off and open the in k cartridge door. Remo ve any objects that are b l ocking th e print head assembly (inclu ding any packing materials), and then turn the HP All-in-One on again.
Cause: The HP All-in-One is not connected to the com puter. Solution: If t he HP All-in-One is not properly con nected to the computer, communication errors can occu r. Make sure the USB cabl e is securely connected to the HP All- in-One and the computer, as shown below.
Improper shutdow n Cause: The last time the HP All-in-One was used , it was not turned off prop erly. If the HP All-in-One is turned off by turning off t he switch on a power strip or by using a wall switch, the devi ce can be damaged . Solution: Press the On button located on the control panel of th e HP All-in-One to turn the device o n and off.
• Ink cartridge p roblem • Ink cartridge(s) are empt y • Ink cartridge(s) are expired • Ink delivery failure • Ink expirati on near • Ink supply error • Non-HP ink • Original HP ink de.
Cause: The in k cartridge(s) are no t intended for use in this device. Solution: Contact HP sup port. Go to: www.hp.com/support If prompt ed, choose your co untry/reg ion, and the n click Co ntact HP for information on calling for te chnical support.
•“ Ink cartridge w arranty inform ation” on page 279 •“ Shop for ink suppli es” on page 167 Ink cartrid ge(s) are empty Cause: The indicated ink cartridg e(s) are out of ink. Solution: Repla ce the indicated ink cartridge (s) with new ink cartrid ge(s).
Each ink cartridge has an exp iration date. The purpose of expirat ion is to protect the printing system a nd to ensure ink quality. When you receive an ink cartridge(s) ar e expired message, remove and repl ace the expired ink cartridge, and then close th e message.
HP recommends that you use genuine HP ink cart ridges. Genuine HP ink cartridges are design ed and tested with HP prin ters to help you easily p roduce great result s, time after time. NOTE: HP cannot guaran tee the quality or re liability of n on-HP ink.
Alignment failed Cause: An incorrect type of paper is loade d in the input t ray. Solution: If you have colo r or photo pape r loaded in the input tray whe n you align the printer, t he alignment might fail. Load unused plain whit e letter or A4 paper into the input tray, and then t ry the alignment again.
To resolve this error, replace the affected ink cartridge(s) with th e ink cartridges that were shipped with the HP All-in-One . For more information, see: “ Replace the ink cartridges” on page 159 Ink cartridge is missing, inco rrectly installed, or not inte nded for your devic e Cause: One or more ink cartridges are m issing.
16 HP warranty and support Hewlett-Packard provides Internet and phone support for the HP All-in-One. This section contains the following topics: • Warranty • Ink cartridge warranty information .
Support process If you have a prob lem, follow these steps: 1. Check the documentation that came with the HP All-in-One. 2. Visit the HP onlin e support Web site at www.
HP supp ort by ph one For a list of support phone numbers, see the printed documentation that came with the device. This section contains the following topics: • Phone support period • Placing a c.
HP Quick Exchange Service (Japan) For instructions on how to pack your device for exchange, see “ Pack the HP All-in-One” on page 284 . Call HP Korea customer support Chapter 16 282 HP warranty an.
Prepare the HP All-in-One for shipment If, after contacting HP support or retur ning to the point of purcha se, you are requested to send the HP All-in-One in for service, make sure you remove and kee.
4. Retain the control panel faceplate. Do not return the control panel faceplate with the HP All-in- One. CAUTION: The repla cement HP All-in-One migh t not come with a control panel faceplate. Store your control panel faceplate in a safe place, and when the replaceme nt HP All-in-One arrives, reattach your control panel faceplate.
If you do not have the original packaging ma terials, please use other adequate packaging materials. Shipping damage caused by improp er packaging and/or improper transportation is not covered under the warranty. 2. Place the return shipping label on the outside of the box.
Chapter 16 286 HP warranty and support HP warranty and s upport.
17 Technical information The technical specifications and international r egula tory information for the HP All-in-One are provided in this section. For additional specifications, see the printed documentation that came with the HP All-in-One .
Print specifications • Up to 1200 x 1200 rendered dp i black when printing from a computer • Up to 4800 x 1200 optimized dpi color when printing fro m a computer and 1200-input dpi • Print speed.
Acoustic informat ion If you have Internet access, you can get acousti c information from the HP Web site. Go to: www.hp.com/support . Duplexer paper specification s Table 17-1 Media weight Type Size Weight Paper Letter: 8.5 x 11 inches Executive: 7.25 x 10.
• Energy consumption • Special handling of materials • Attention Cali fornia users • NDL battery disposal • Taiwan battery statement • Disposal of Waste Equipment by Users in Private Households in the European Union Paper use This product is suited for the use of recycled paper according to DIN 19309 and EN 12281:2002.
Taiwan batte ry statement Disposal of Wast e Equipment by Users in Private Hou seholds in the European Union Disposal of Waste Equipment by Users in Private Households in the European Union This sy mbol on the product or on its pack aging indicates that this product must not be dis posed of with y our other household wa ste .
Regulato ry notices The HP All-in-One meets product requirements from regulatory agencies in your country/region. This section contains the following topics: • Regulatory model identification number • FCC statement • Notice to users of the U.
FCC statem ent FCC sta tement The U nited Stat es Feder al Communi cations Commis sion (in 4 7 CFR 1 5 . 1 05) ha s spec ified that the follo w ing notice be br ought to the attention o f user s of this pr oduct.
Notice to users o f the U.S. telephone n etwork: FCC requ irements Notice to users of t he U.S. telephone n etwor k: FCC requirements This eq uipment complie s with FCC r ules, P art 6 8. On this equipment is a label that contains, among other inf ormation , the FCC Registr ation Number and R inger Equi valent Number (REN) for this eq uipment.
Note à l’atte ntion des util isateurs du réseau tél éphonique canadien/no tice to users of the Canadia n telephone networ k Note à l’at tention des utilis ateurs du réseau téléphoni que ca.
Notice to users in the European Economic Area Notice to users in t he European Economic Area This pr oduct is desi gned to be connected to the analog S w itched T elecommuni cation Networ ks (PS TN) of the Eur opean E conomic Ar ea (EEA) countr ies/r egions.
VCCI (Class B) compl iance statement for users in Japa n Notice to users in Ja pan about power cord Geräusch emission Geräusc hemission LpA < 7 0 dB am Arbeitsplatz im Nor malbetrieb nac h D IN 4 5 63 5 T .
Wireless: Noti ce to users in Canada Notice to users in C anada/N ote à l'atten tion des utilisateurs cana diens For Indoor Use . This di gital apparatu s does not e xceed the Cla ss B limits fo.
Wirele ss: Notice to use rs in Taiwan Declaration of c onformity (European Eco nomic Area) The Declaration of Conformity in this docum ent complies with ISO/IEC 17050-1 and EN 17050-1. It identifies the product, manufacturer’s name and addr ess, and applicable specifications recognized in the European community.
HP Photosmart C7200 All-in-One series declaration o f conformity DECLARATION OF CONFORMITY according to I SO/IEC 17050- 1 and EN 17050- 1 Supplier's Name: He wlett-Packard Company DoC#: SDGOB-0713-rel.
Index Symbols/Numerics 10 x 15 cm photo paper copy 122 load 78 specifications 287 2 pages on 1, print 95 4 pages on 1, print 95 4 x 6 inch (10 x 15 cm) borderless photos print 90 4 x 6 inch photo paper copy 122 4 x 6 inch photo paper, load 78 802.11 wireless, configuration page 56 802.
Ethernet 31 printer sharing 36 contrast, fax 138 control panel buttons 13 enter text and symbols 18 features 13 overview 12 copy blank 219 borderless has borders 218 borderless photo 126 cancel 129 cr.
IP phone, using 147, 256 lighten or darken 138 log 151 menu 17 monitor dialing 134 not answering 238 paper checking 144 paper size 144 paper width incorrect 269 parallel splitter 242 pause 18 photos 1.
L labels load 81 specifications 287 landscape orientation 86 language, set 25 left arrow 13 legal paper copy 122 load 76 specifications 287 letter paper copy 123 load 76 specifications 287 lid backing.
peer-to-peer network 43 phone rece ive fa x 140 send fax 133 phone cord check 252 connection, failure 252 phone line, answer ring pattern 63 phone numbers, support 280 phone support 281 phone support .
declaration of conformity (European Economic Area) 299 declaration of conformity (U.S.) 300 Directive 2002/95 /EC 290 FCC part 68 requirements 294 FCC statement 293 geräuschemission 297 notice to use.
send fax 131, 132 set up 65 SSID troubleshoot 186 wireless setting 57 start copy black 14 start copy color 14 start fax black 14 color 14 status, network 54 stop copy 129 fax 148 print job 99 scan 119.
Z zoom button 13 buttons 109 photos 109 308 Index.
Ein wichtiger Punkt beim Kauf des Geräts HP PHOTOSMART C7200 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HP PHOTOSMART C7200 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HP PHOTOSMART C7200 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HP PHOTOSMART C7200 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HP PHOTOSMART C7200 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HP PHOTOSMART C7200 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HP PHOTOSMART C7200 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HP PHOTOSMART C7200. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HP PHOTOSMART C7200 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
