Benutzeranleitung / Produktwartung XP20000 des Produzenten HP (Hewlett-Packard)
Zur Seite of 170
HP S to r age W or ks XP2 4 000/XP20000 Exter nal S to r age S oft w ar e U se r Gui de Abstract This gui de descr ibes how t o connect and map e xternal stor age to HP Sto rage W orks XP2 4000/XP20000 stor age sy stems .
© Cop yr ight 200 7 , 20 1 1 Hewlett-P ackar d Dev elopment Com pany , L.P . Conf idential com puter softwar e. V alid license fr om HP requir ed for pos sessio n, use or cop ying .
C ont ents 1 Ov ervi ew o f HP St or age W orks XP Exter nal Sto r age Softwar e...........................9 XP Exter nal Stor age..................................................................................................................9 Unify ing Cop y Oper ations betw een Differ ent Stor age S yst ems.
3 Pr epar ing for XP Exter nal Stor age Oper ations.............................................. 37 S y stem R equir ements...............................................................................................................37 Sto rage S ys tems Supported as Exter nal Stor age S yst ems.
Changing the Cr oss-subs yst em P ath......................................................................................83 R eplacing A ll Cro ss-subs yste m P aths with Ne wl y Added Cr oss-sub sy stem P aths...........................83 Chec king the External V olume Details.
R estr icti ons on Initiator/Ext ernal MI X Mode.........................................................................125 8 T r oubleshoo ting......................................................................................126 T r oubleshooting f or XP Exter nal Stor age.
IBM D S3000/DS4 000/DS5 000 Ser ies................................................................................... 150 S y stem P aramete r for C onnecting IBM S VC S eri es.....................................................................150 Notes o n Connecting IB M XIV Se rie s.
P arameter s ................................................................................................................. 164 Ex ample ...............................................................................................................
1 Ov er v ie w of HP S tor age W or ks XP Exter nal St or age So ft w ar e This c hapter pr ov ides an o verv iew o f XP External S tor age . • “XP Exter nal Stor age” (page 9) • “Unify ing .
Figur e 1 Unifying Cop y Operations between Different S torage S ystems Unify ing Connec tions f r om a Hos t to Diffe r ent S tor age S y ste ms When a s yst em has multiple st orage s yst ems, a hos t usually needs to connec t all stor age s yst ems.
Figur e 2 Unifying Connections from a Host to Differ ent Storage S ystems Unify ing Connecti ons fr om a Host to Diff eren t Stor age Sy stems 1 1.
2 Abou t XP Exter nal S tor age Oper atio ns This c hapter e xplains the functi ons and the applicati ons of XP Exter nal Stor age. • “Connec ting External St orage S ys tems ” (page 12) • “.
Figur e 3 Concept of XP External S torage B y mapping an e xternal v olume as an int ernal v olume using XP Exter nal Stor age as show n in F igur e 3 (page 13) , it becomes po ssible to oper ate the e xternal v olume using R emote W eb Conso le as if it is a v olume in the local stor age s ys tem.
Figur e 4 XP External Stor age Components This s ection de scr ibes the details on the sto rage s y stems , cr oss-sub sy stem paths, v olumes and mapping paths a s show n in Fi gure 4 (page 14 ) .
local stor age sy stem. A fter the mapping , you can manipulat e the exter nal v olume fr om the local stor age sy stem in the s ame wa y as manipulating an inter nal volume .
• Using spr eadsheets to map e xternal v olumes XP Exter nal Stor age supports Conf igur ation F ile Loader spr eadsheets. T hese spr eadsheets allo w yo u to confi gure the ma pping of multiple e xter nal volumes at the s ame time, w hic h is eff ic ien t when mapp ing large n umbers of v olumes .
(inter nal volume s) . Identify the volume s in each e xternal s tor age sy stem that sh ould be mapped as inter nal volume s. • Y ou cannot acces s the data that is stor ed in an exter nal vo lume bey ond the max imum av ailable capac ity .
set to Dis able . All I/O to and fr om the local stor age sy stem (e ither Enable or Disa ble) alw ay s use s cache mode . W rit e operati ons ar e alw ay s back ed up in duple x cache .
If two o r more e xternal v olumes us e the same r edundant cr oss-subs yst em paths, thes e exter nal v olumes can be a gr oup . This gr oup is called a path gr oup . In the redundant c r oss-sub sy stem paths , the cr oss-subs ys tem path that has the highe st pri ority is called the pr imar y path .
the local stor age sy stem fo r the alternate path . Ther ef ore , CL1 port and CL2 port are spec ified a s sho wn in the f igure . Figur e 5 Example o f Alternate P ath Setting F igur e 6 (page 20) illustr ates an e xample o f setting an alternat e path when a s w itch is u sed.
Figur e 7 Example o f Unavailable Alter nate P ath Setting Ex amples of S w itching I/O Ex ec ution P aths to Alt ernate P aths This s ection de scr ibes ex amples of the pe rformance w hen the I/O ex.
Figur e 8 When the P ath Mod e is Multi Mode • When the path mode is Single mode F igur e 9 (page 23) sho w s an ex ample of w hen the path mode is Single mode . When an err or occ urs in the path that is being u sed for I/Os , the I/O e xec ution path is s wit ched to the path w ith the second highe st pri or it y .
Figur e 9 When the P ath Mod e is Single Mode • When the path mode is Single mode and ther e is at least one alter nate path in the Standb y statu s F igur e 1 0 (page 24) sho ws an e xample of w hen the path mode is Single mode, and ther e ar e alternat e paths in Normal st atus and Standb y status .
Figur e 1 0 Single M ode with Alternate P aths in Normal and Standb y 2 4 About XP Ext ernal Sto rage Oper ations.
Figur e 1 1 Single M ode with Alternate P aths in Standb y Only Co nnecting Mainf rame V olumes Mainfr ame volumes that pr e -ex ist on an e xternal s tor age sy stem and ar e accessed b y E SC ON or FICON c hannels cannot co nnect dir ectly to the s tor age sy stem as an e xter nal volume .
F or the v olume for matting and Wr ite to Control Blocks operati on procedur es, s ee the HP Sto rage W orks XP2 4000/XP20000 V ir tual L VI/L UN (VLL) and V olume Shr edder User Gui de .
the e xternal s torage s ys tem can be displa yed in a di alog box of XP Exter nal Stor age when y ou ex ecute po r t disco ve r y . Y ou can set in ad vance the mapp ing polic y on whether t o ex ec ute port discov er y auto matically or manuall y .
see the HP S tor age W orks XP2 4000/XP20000 Virtual L VI/L UN ( VLL) and V olume Shredder Use r Guide . Go to st ep 4. 3. If y ou set the emulati on type f or the mainfr ame s ys tem whe n you ma p the volume , the status of the mapped v olume becomes Block ade.
F r om the host , you can acces s the ext ernal sto rage s yste m volumes that ha ve n ot been mapped as inter nal vo lumes. T her e is no re str icti on.
V ir tual L VI/L UN ( VLL) Consi der the fo llow ing for V irtual L VI/L UN (VLL) : • If y ou set the em ulation type f or the mainfr ame sy stem a s you ma p the exter nal vo lume, y ou need to f ormat the mapped v olume or perf orm the W rite to Control Blocks operati on using the VLL func tion bef or e y ou use the e xternal v olume.
HP St or age W or ks XP Snapshot S oftwar e Mapped v olumes can be used f or XP Snapshot . Consider the f ollo w ing for XP Snap shot: • Both inte rnal and e xternal v olumes cannot be mi xed in one pool . • All e xternal v olumes in the same pool mu st be in the same Cache M ode .
T o copy the e xisting data in the mapped e xternal v olume using the cop y pr ogram pr oducts of R emote W eb Console suc h as XP C ontinuou s Access and XP B usiness C opy , the emulation type of the ma pped exte rnal v olume also has to be OP EN-V .
is not e xec uted automati cally . If you need t o for mat the mapped volume , for mat the volume using the VLL f unction . F or the v olume for matting operati on pr ocedure , see the HP Sto rage W orks XP2 4000/XP20000 Virtual L VI/L UN ( VLL) and V olume Shredder U ser Guide .
1 . Use XP Ext ernal St orage t o map the volume in the e xternal sto rage s yste m as an inter nal volume of the local st orage s yst em, w hic h is used as R CU fo r the XP Contin uous Acce ss Journal oper ation . Y ou can selec t the emulatio n t ype o f the mapped v olume as y ou req uired .
XP Busine ss C opy Ope rati ons F igur e 1 7 (page 35) sho ws the u se of an e xternal v olume for the XP Bu siness C opy oper ation . The mapped e xternal v olume is set as the S - V OL of the XP Busines s Cop y pair , and the local stor age s ys tem inter nal volume is s et as the P -V OL of the XP Busines s Cop y pair .
XP Snapsh ot Oper ations F igur e 1 8 (page 36) sho ws the u se of an e xternal v olume fo r the XP Snapshot oper ation . The mapped e xternal v olume is set as a pool- V OL of the XP Snapsh ot pair . F or details on XP Snap shot , see the HP S tor age W orks XP2 4000/XP20000 Snapsh ot User Gui de .
3 Pr epar ing f or XP Exter nal Sto r age Oper atio ns This c hapter de scr ibes the r equir ements and pr epar ations f or XP External S tor age oper ations .
T abl e 1 XP External S torage Requirements Requirement Item 1 , 02 4 per port Max imum number of ports in the connected e xternal stor age s ystem (WWN is used as a po r t iden tificati on number 6 3,2 3 2 volume s can be connected . 4, 09 6 volumes can be connec ted per port.
• Mak e sure that an e xternal v olume is acces sed only f r om the local stor age s yst em side once the e xternal v olume is mapped . ◦ Mak e sure that the e xternal v olume , whi ch has been ma pped as an internal v olume, is not acces sed fr om the host that is connec ted to the e xternal s tor age sy stem .
T abl e 3 When the Emulation T ype of the External V olume is for Mainframe HDD T ype Application SA T A FC/SSD Not R ecommended Not R ecommended Database Online T ransac tion Pr ocessing (OL TP) Not .
smaller than the actual e xternal v olume capac ity . The a vailable ca pacity decr eases as m uch capac ity as the data management inf ormati on ar ea. F igur e 20 (page 41) sho ws an e xample o f when the or iginal capac it y of the e xter nal volume is bi gger than the basic capac it y of the em ulation type .
• The attr ibutes that ar e set for the e xternal v olume or iginally on the e xternal st orage s yst em side (suc h as the port sec urity , the L UN sec urity , the V olume Re tention Manage r attribute s, and so on) ar e not kept , when the e xter nal volume is mapped a s an internal v olume.
Mainte nance Guidelines f or an Exter nal Stor age S y stem • Bef or e you c hange settings o f the exte rnal stor age sy stem, y ou must de lete the e xternal v olume mapping . After y ou change s ettings of the e xternal s tor age sy stem, y ou must r emap the e xternal v olume.
T o k eep the load proper , HP reco mmends the follo wing: ◦ Def ine volume s of each AM S 2000 ser ies st orage s yst em to set the e xternal path n umber to tw o. In that ca se , set the paths to the ports of eac h contr oller of the AM S 2000 ser ies stor age sy stem.
S tar ting XP Exter nal Stor age This s ection e xplains how to s tart XP External S tor age. T o start XP Exter nal Stor age and display the w indow : 1 . Start R emote W eb Console , and open the Remo te W eb Conso le main windo w . F or instr uctio ns, see the HP S tor age W orks XP2 4000/XP20000 R emote W eb Console U ser Guide .
4 Using the XP Exte rnal S tor age GUI This c hapter e xplains the XP External S tor age windo ws: V olume Operati on, P ath Oper ation , and P or t Oper ation . When y ou clic k the tab of the w indow name , the windo w is sw itched to the corr esponding w indo w .
Figur e 22 V olume O peration W indow Description Item The le ft pane of the windo w contains a tr ee and a list for changing the tr ee display . The inf ormati on show n in the list on the r ight change s according to the it ems selected in the tr ee.
Description Item Applie s the settings in the Pre vi ew dialog bo x to the local stor age s ystem . When the s ettings are appli ed successfull y , they ar e r emov ed fr om the Pre vi ew dialog bo x and the settings in blue italic s in the V olume Oper ation w indow appear normall y .
V olume Oper ation T r ee The V olume Oper ation tr ee, on the le ft side of the V olume Oper ation w indow , contains the f ollow ing: Description Item Changes the it ems display ed in the V olume Operatio n tree . Y ou can select F ibre as a PCB ty pe.
T abl e 5 P op-up Menu for the V olume Operation T ree (continued) Description Refer ence P op-up M enu Items displa yed in the tree (Clicked items are underlined) Disconnec ts or reconnec ts the ext ernal vo lumes in the select ed exter nal stor age s ystem .
T abl e 6 Status of the External V olume in Ext. V OL Status Description Display ed Item The path is no rmal. Normal The s tatus of the mapping path is n ot retr ie ved y et. Cli ck Status in the V olume Oper ation w indow to c hange the name of the button to Status: Enable , and displa y the status of the mapp ing path.
The Ext ernal V olumes list pr ov ides the f ollow ing infor mation: Description Item External v olume group n umber and sequenti al number assi gned to each v olume in the exter nal volume gr oup . This a ppears in the for mat of external volume group number - sequential number of volume in the group .
Description Item Statu s of the operati on ex ecu ted to the exter nal volume or status o f the connection o f the mapping path. F or the displa yed statu s descr iptions , see T able 6 (page 51) . T o chec k status of eac h LDEV in the exte rnal volume , vie w the VLL w indow .
T abl e 7 Cro ss-subsy stem P aths List Details (continued) Description Item Identif ication numbe r of the port in the exter nal stor age s ystem . WWN R ight-clic k a ro w in the Cross-subs ystem P .
Description Item A list of the ite ms that are set in the lis t of the XP External Stor age windo ws . The items appear ing in the pre set area differ depe nding on the items set in the list o f the XP External S tor age windo ws . The items in the pr eset ar ea appear in blue italic s in the list of the XP Exter nal Stor age w indow s.
Description Item The le ft pane of the windo w contains a tr ee and a list for changing the tr ee display . The inf ormati on display ed in the list on the r ight change s corr esponding to the items select ed in the tree . F or details, see T able 8 (page 57) .
Description Item Applie s the settings in the Pre vi ew dialog bo x to the local stor age s ystem . When the s ettings are appli ed successfull y , they ar e r emov ed fr om the Pre vi ew dialog bo x and the settings in blue italic s in the P ath Oper ation w indow appear no rmally .
P ath Oper atio n T r ee The P ath Oper ation tr ee , on the left side of the P ath Oper ation w indow , contains the fo llow ing: Description Item Changes the it ems display ed in the P ath Operatio n tree . Y ou can select w hich si de to display the inf ormati on on cr oss-subs yst em paths fr om.
Description Item The e xternal po r t of the local sto rage s yst em. One of the follo wing ico ns appears: : P orts in the Standar d mode. : P orts in the Initiator/Exter nal MIX mode . P or t The w ait time (in seconds) of P L OGI to the ext ernal stor age s ystem w hen the s witc h is not connected .
T abl e 9 Status of the Cr oss-subs ystem P ath Display ed in th e Status (continued) Description Display ed Item Connec ting to the exter nal stor age sy stem or the e xternal vo lume is intentionall y stopped using the Dis connec t Subs ystem command or the Disconnect V olume command.
Description Item External po r t in the local stor age sy stem. P or t WWN indicating the tar get port in the e xternal s torage s ystem . WWN V endor name of the e xternal stor age sy stem. V endor Pr oduct name of the e xternal sto rage s yst em. Product Name Ser ial number of the e xternal stor age s ystem .
Description Item The le ft pane of the windo w contains a tr ee and a list for changing the tr ee display . The inf ormati on display ed in the list on the r ight change s corr esponding to the items select ed in the tree . T ree Info rmation on the port appear s corr esponding to the items select ed in the tree .
P or t Oper atio n T r ee The P or t Oper ation tr ee, on the le ft side of the P ort Operati on windo w , contains the fo llow ing: Description Item Changes the it ems display ed in the P ort Operation tr ee. Y ou can select F ibre as a PCB ty pe. Lis t The ports in the local st orage s yst em appear in the tree .
Description Item The P CB mode of the port . • Standard • High Speed • MIX (for Initi ator/Exter nal MIX mode) The e xternal po r ts do not ha ve the High S peed mode. F or detailed inf ormation o n the PCB mode , see the HP Stor age W orks XP2 4000/XP20000 L UN Manager Use r Guide .
5 P erf or ming XP Exter nal Sto r age Oper atio ns This c hapter de scr ibes setting the e xter nal volume using XP Exter nal Stor age. • “Ov er v ie w of Setting Oper ations ” (page 65) • .
Figur e 23 Oper ations of Making External V olumes Usabl e from a Ho st The o utlined procedur e for making the e xter nal volumes u sable fr om a host is a s follo ws: 1 . Pr epare a v olume in the exter nal stor age sy stem . 2. Se t the por t and s ys tem par ameters f or the e xternal st orage s yst em.
1 . Set the topolog y informati on accor ding to the conf igur ation of the connec tion . 2. A ccording t o the configur ation , set the data tr ansfer s peed. 3. S et the sy stem par ameters . See “C onnecting Exter nal Stor age Sy stems” (page 134) to se t the sy stem par ameters f or the e xternal st orage s yst ems.
Exter nal volume s can be mapped either aut omaticall y or manually . This sec tion e xplains automati c mapping . Fo r the differ ence betw een automati c mapping and manual ma pping, s ee “Differ ence betw een Auto matic Mapping and Man ual Mapping ” (page 26) .
3. R ight-clic k one of the f ollo wing in the V olume Oper ation tr ee: • Subs ystem : Allo ws y ou to c reat e a new path gr oup , and add exte rnal v olumes to the ne w path gr oup • P ath group : Allo ws y ou to add e xternal v olumes to the e x isting path gr oup .
1 0. Clic k OK to clo se the Add V olume dialog bo x. • When the S SID setting is r equir ed, the S SID dialog bo x opens (see “S SID Dialog Bo x” (page 75) ) . Go to st ep 1 1 . • When the S SID setting is not r equir ed, the V olume Operati on w indow ope ns.
The A dd V olume dialog bo x consists o f: • List (f or mor e info rmation , see “V olume Oper ation L ist (When P ath Gr oup is Clic k ed)” (page 51) ) ◦ Characteristic1 : Identif icatio n number of the e xternal v olume. ◦ ExG: Exter nal volume gr oup number and its seq uential numbe r .
Set Ext ernal V olume P arame ter Dialog Bo x Use the S et External V olume P aramete r dialog bo x to set the e xternal v olume paramet er . The Set Exter nal V olume P arame ter dialog bo x opens w hen yo u righ t -cli ck the e xternal v olume in the Add V olume dialog bo x and clic k the Set External V olume P arameter in the pop-up menu .
• Inflo w Control Inflo w Contr ol spec ifie s if the wr iting oper ation to the cac he memory is stopped ( Enable ) or contin ued ( Disable ) when the w riting oper ation to the e xter nal volume is impo ssible .
The LDE V Mapping (A uto) dialog bo x consists of: • SLP R Limited T o r estr ict the CU in the CU list to the CU w hic h belongs to the SLP R, selec t the Limited . T o displa y all the CU in the CU list w ithout an y r estr icti on, s elect the Unlimited .
Figur e 2 7 LDEV Mapping (M anual) Dialog Bo x The LDE V Mapping (Manual) di alog box consis ts of: • List ◦ ExG The e xternal v olume gr oup number o f the connected e xternal v olume spec ified in the S et Exter nal V olume P arame ter dialog bo x.
Figur e 28 S SI D Dialog Bo x The S SID dialog bo x consists of: • SLP R list When the s tor age sy stem is partiti oned using XP Disk/Cac he P artition , use the SLP R list .
SSID (0004–FFFE) : Se lect the S SID fr om the S SID list . Y ou can select the v alue for an S SID f rom 0x0004 to 0xFFFE . ◦ If y ou hav e selec ted the SLPR L imited chec k box o n the SSID dialog bo x, o nly the S SIDs that can be used in SLP R selec ted on the S SID dialog bo x appear in the list .
5 . Make the s ettings to all the LDEVs in the LDK C:CU:LDEV column (r epeat step 2 thr ough step 4 ) . 6. C lick OK . The s pecif ied numbers ar e assigned t o the LDEVs. Ho w ev er , the Add V olume dialog bo x show s onl y the LD EV n umber assigned f or the f irst LDEV of eac h ext ernal v olume .
complet ed. T o conf igur e the cr oss-subs yste m paths, us e the Conf igur e Cr oss-subs yst em P aths dialog bo x. CA UTION: Y ou cannot dele te all the cur re nt cr oss-subs yst em paths to substitu te new ly added cr oss-subs ys tem paths fo r them in one oper ation .
The mi ddle pane sho ws e xter nal por ts of the local s torage s ys tem that connects to the e xternal stor age sy stem that y ou select ed in the left pane. ◦ P ort : exter nal port of the local stor age sy stem . One of the f ollow ing icons appear s: : P or ts in the St andard mode .
• Cancel button Cancels the s ettings and clo ses the dialog bo x . • P op-up Menu R ight-cli ck a r o w in the Conf igur e Cr oss-subs ys tem P aths dialog bo x to perf orm the f ollow ing oper ations .
7 . R ight-clic k the WWN in the WWN , and then cli ck Add in the pop-u p menu . The c r oss-sub sy stem path is added t o the Selec ted P aths w ith the selected inf ormati on. C onfi gur e mor e than two c ro ss-subs yst em paths for one path gr oup .
8. R epeat the operati on of the Raise Pr iority command until the r ow of the s elected path appear s in the head of the Selected P at hs list and its Priority column c hanges to 1 . When the Pr iority column change s to 1 , it means the cr oss-subs yst em path is set as the usuall y used o ne (primary path) .
F igur e 34 (page 84 ) show s the ov ervie w of the oper ation and the statu s of the cr oss-sub sy stem paths. W hen y ou delete the c urr ent c ro ss-subs yst em paths (A and B) and add ne w cr oss-.
7 . Disco nnect the cable that the cr oss-sub sy stem path B u ses , and connect the cable that the cr oss-subs ys tem path D use s. 8. Cancel the co nfigur ation of the c r oss-subs yst em path B, and add the c ro ss-subs yste m path D . 9 . Cli ck Appl y to apply the s ettings of the cr oss-subs ys tem paths B and D .
emulati on type of the mapped e xternal v olume is for the mainf rame s ys tem, the capac it y is sho wn in C ylinde r . • Close button Clo ses the LDEV Inf ormatio n dialog bo x.
T abl e 1 2 Status of the Mapping P aths in the M apping P ath Information Dialog Bo x (contin ued) Description Display ed Item The s etting of the exter nal stor age sy stem has been c hanged. F or ex ample, the path def inition w as deleted, or the e xternal stor age sy stem itself w as replaced by an other dev ice .
T urning On o r Off the Sto r age S y ste m This s ection de scr ibes ho w to turn on or o ff the local stor age sy stem and the e xternal s torage s ys tem after the XP Exter nal Stor age operati on has been st ar ted .
When the Check P at hs & Restor e V olume command is e xec uted and the e xternal v olume is r eady to be r estor ed as the mapped v olume , the ext ernal v olume is set to accept the I/Os and y ou can re sume using the e xternal v olume as a mapped v olume .
1 . T urn on the e xter nal stor age s yst em that contains the e xternal v olume, w hic h is mapped as an inter nal volume . 2. T urn on the po we r supply of the local s tor age sy stem .
1 . T urn on the po wer su pply of the e xternal s tor age sy stem . CA UTION: Mak e sure that the po wer su pply of the e xter nal stor age sy stem is complet ely on and then go on to the ne xt step . 2. T urn on the po we r supply of the local s tor age sy stem .
T abl e 1 3 O perations Required bef ore Disconnecting External V olumes (continued) This Operation is Required If the External V olum e is Used in this wa y P erfor m the follo wing oper ations on all the XP Thin Pr ov isioning v olumes (V- VOLs) that ar e assoc iated w ith a pool to w hich the e xternal v olume is r egister ed.
3. C lick the pr oduct name in the V olume Operati on tr ee. 4. R ight-cli ck the e xternal v olume that y ou wan t to change in the V olume Oper ation list . 5 . Clic k Disconnect V olume in the pop-up menu . The s ettings appear in blue italic s. 6.
1 . Start R emote W eb Console , and open the V olume Oper ation w indow . 2. Mak e sure that R emote W eb Console is in Modify mode . 3. R ight-clic k the pr oduct name that y ou wan t to re sume connectio n in the V olume Oper ation tr ee. 4. Cli ck Check P aths & Restore V olume in the pop-up menu .
3. S elect one of the f ollo wing f r om the list abo ve the P ath Oper ation tr ee . • Fibr e - Local Subs ystem : Displa ys the ports in the local st orage s yst em. Se lect Fibr e - Local Subs ystem to st op the use of all the c r oss-sub sy stem paths co nnected to the spec ifi ed port in the local stor age sy stem .
Chec k the follo wing be for e changing the cac he mode of the e xternal v olume. • Whethe r the volume is no t set as a v olume that constitut es a part of a L USE v olume . When it is s et as a v olume that constitute s a par t of a L USE v olume , the cache mode se t ting should be the same amo ng all volume s that constitute a L USE v olume .
Changing the P ort Setting of the Ext ernal S tor age S y stem Y ou can change the s etting of the port of the e xternal s torage s ys tem in the P ath Oper ation w indo w . F or c hanging the setting of the port , use the Change WWN P arame ter dialog bo x.
ar e accepted until the time set f or this par ameter has pa ssed . After the time se t for this par ameter has pas sed, the path s tatus becomes Bloc k ade.
The E dit P olic y dialog bo x consists of: • P attern: Mapping poli ci es. De fault P olicy is pr epared . • P olicy : The co ntent of the s elected mapp ing policy is dis play ed. Emulation T ype : T he emulati on t y pe of the ext ernal v olume .
• Whethe r an L U path is set . When an L U path is set to the ma pped volume , you cann ot delete the e xternal v olume mapping . • Whethe r the volume is se t to confi gure the XP C ontinu ous Acces s pair , XP Continu ous Acces s Journal pair , XP Busines s Cop y pair , or XP Snapshot pair .
6 Using S pr eadsheets f or XP Exte rnal S tor age Oper ations This c hapter co ntains the follo wing s ections de scr ibing ho w to use spr eadsheets, inst ead of the R emote W eb Cons ole GUI, f or XP Exter nal Stor age operati ons.
Bef or e Using S pr eadsheets R emote W eb Cons ole is r equired t o use spr eadsheets. In additi on, y ou mu st use CFL Exte nsion (not the C onfi gurati on F ile Loader w indow) w hen y ou perfor m oper ations on s preadsheets . Spr eadsheets must be w ritte n in the follo w ing for mat.
T abl e 1 5 Relationship Among the T ypes, Operation T ags, and V ersion Number T emplate V ersion Number Operation T ag T ype ExternalStorage_ Get_def.spd 05_0 2_0 1 S SID ExternalGr oup MappedV olume Get ExternalStorage_ AddVolumeSetting_ def_.spd 05_0 2_0 1 AddV olume Setting V olumeOperati onF ibre ExternalStorage_ AddVolumeSetting2_ def_.
Spec if y the GET_ALL par ameter fo r the SS ID tag . By spec if y ing this par ameter , the infor mation about all the S SIDs that the local st orage s yst em has w ill be sav ed in file s. [SSID] GET_ALL,; T able 1 6 (page 104) sho ws the inf ormati on that w ill be sav ed in a file w hen the S SID tag is wr it ten in a spr eadsheet .
T abl e 1 8 Information Sa ved when the MappedV olum e T ag is Wr itten Content Item Column in Spreadsheet La yer Info rmation abou t the exter nal stor age sy stem First L ayer Name of the v endor V .
Mapp ing Exter nal V olumes T ags to map e xternal v olumes ar e: • The A ddV olumeS etting tag: Creat es multiple LDEVs in an e xternal v olume b y spec if y ing the capac ity • The A ddV olumeS .
T abl e 20 AddV olumeSetting T ag P arameters Number of Characters Range of V alues Setting P arameter Column in Spreadsheet La yer Info rmation abou t exter nal volumes and the pr imary path First la.
T abl e 20 AddV olumeSetting T ag P arameters (continued) Number of Characters Range of V alues Setting P arameter Column in Spreadsheet La yer Info rmation abou t alternate paths .
T abl e 20 AddV olumeSetting T ag P arameters (continued) Number of Characters Range of V alues Setting P arameter Column in Spreadsheet La yer N/A N/A Identif ier + A + B 2 hex adecimal digits or f ew er 00 to 0 1 LDK C number LDK C C 2 hex adecimal digits or f ew er 00 to FE CU number CU D 2 hex adecimal digits or f ew er 00 to FF LDEV number .
T abl e 20 AddV olumeSetting T ag P arameters (continued) Number of Characters Range of V alues Setting P arameter Column in Spreadsheet La yer Capac it y of the LDEV in blocks . F or details, s ee “Ho w to Spec ify the LDEV Capac it y” (page 110) .
Figur e 40 When Creating Multiple LDEVs in an Exter nal V olume • When the em ulation type is o ther than OPEN-V : F or details on the ba se LDEV capac ity , the base data ar ea capac it y , and the contr ol inf ormatio n ar ea capac it y , see “R equir ed V olume Capac ity for E ach Emulati on T y pe” (page 152) .
T abl e 2 1 AddV olumeSetting2 T ag P arameters Number of Characters Range of V alues Setting P arameter Column in Spreadsheet La yer Info rmation abou t exter nal volumes and the pr imary path First .
T abl e 2 1 AddV olumeSetting2 T ag P arameters (continued) Number of Characters Range of V alues Setting P arameter Column in Spreadsheet La yer N/A N/A Identif ier + A + B 2 hex adecimal digits or f ew er 00 to 0 1 LDK C number LDK C C 2 hex adecimal digits or f ew er 00 to FE CU number CU D 2 hex adecimal digits or f ew er 00 to FF LDEV number .
T abl e 2 1 AddV olumeSetting2 T ag P arameters (continued) Number of Characters Range of V alues Setting P arameter Column in Spreadsheet La yer S SID assi gned to the r ange of the LDEV number s. Spec ify the SS ID wr itten in the file that y ou sav ed by using the S SID tag .
T abl e 2 3 Ch eckP at h-Restor e V olume T ag P arameters Number of Characters Range of V alues Setting P arameter Column in Spreadsheet La yer Grp : 5 dec imal digits or f ew er VPG : 4 dec imal digits or f ew er Grp : 1 to 1 6 384 VPG : 1 to 40 9 6 External v olume gr oup number and its sequen tial number .
T abl e 2 5 Structure and Identifier of P arameters (Div ideP athGroup T ag) Description Content Identifier Lay er This la yer is r equired . Informati on about the path gr oup that yo u want to change . None The f irst la yer This la yer is r equired .
T abl e 2 7 Structure and Identifier of P arameters (UniteP athGroup T ag) Description Content Identifier Lay er This la yer is r equired . Informati on about the path gr oup to whi ch y ou want t o mov e an e xternal v olume. None The f irst la yer Spec ifi es one ro w for each alternat e path grou p.
◦ Inflo w contr ol: Disable ◦ CLPR: 00 • LDEVs ar e confi gured a s follo w s: Number of LDEVs: 3 ◦ ◦ LDEV number : 00: 00:00, 00: 0 1 :00, 00:02 : 00 ◦ LDEV capac it y: 9 6, 000 blocks Ex.
7 R emote C ommand De v i ces This c hapter de scr ibes ho w to use r emote command de v ices as command de v ices . • “Ov er v ie w of Re mote Command De vi ces ” (page 119) • “Guideline s .
Guide lines f or R emote C ommand De v ices Notice s on r emote command de vi ce are as f ollow s: • Y ou can map a command de v ice as a r emote command de vi ce whe n one of the fo llow ing stor age sy stems is co nnected as an e xternal su bs ys tem.
T abl e 2 9 Display ed Information in Dev ice Column for Remote Command De vice Display ed Information in De vice Column Storage S ystem F ormat: Emulation Type + -CM F or ex ample , OPEN-V -CM, OPEN-.
T abl e 30 Restrictions on Remote Command De vice Restriction Item OPEN- V Emulatio n t ype 1 Number of LDEVs in an e xternal v olume Disable Cac he mode 9 6, 000 Blocks (abo ut 4 7 MB) Minimum capac .
F or detailed inf ormati on on the port block and se t ting the Initiat or/External MI X mode , see the HP Sto rage W orks XP2 4000/XP20000 L UN Manager User Gui de .
Figur e 43 Ex ample of Using XP Continuous Access or XP Continuous Access Jour nal with Remote Command Dev ice Pr ocedure t o Use Initi ator/Exter nal MIX Mode This s ection de scr ibes the procedur e to use the Initiat or/External MI X mode and the pr ocedure to stop u sing the Initiator/Exte rnal MIX mode .
4. Map the command de vi ce as the r emote command de vi ce . Only the co mmand dev ice can be r ecogni z ed when the dis cov ery operati on is perfo rmed using the e xter nal por t of the Initi ator/Exter nal MIX mode .
8 T r ouble shooting This c hapter pr ov ides tr oubleshooting inf ormation f or XP External S tor age. • “T rou bleshooting f or XP External S tor age ” (page 126) • “Calling HP T echnical .
T abl e 3 1 G eneral T roubleshooting for XP Exter nal Stor ag e (continued) Correctiv e Action Er ror P erfor m the requir ed actio n and retry the oper ation. S ee “T rouble shooting V olume Discov er y” (page 130) f or the causes o f the err or .
T abl e 3 2 M apping P ath Statuses and Required Actions (continued) Action Description Status The port of the e xternal s torage s ystem is r ecogniz ed. See the doc uments for y our exter nal stor age sy stem , and check if the oper ation that change s the setting infor mation abou t the mapped dev ice has not been perf ormed .
T abl e 3 2 M apping P ath Statuses and Required Actions (continued) Action Description Status The port of the e xternal s torage s ystem is r ecogniz ed. Chec k the condition of the connecti on (for e xample , cables, s witc hes) to the ext ernal stor age sy stem.
T abl e 3 2 M apping P ath Statuses and Required Actions (continued) Action Description Status Chec k the status of the v olume in the ext ernal stor age sy stem and r ecov er the vo lume if it is not normal . F ormat the v olume if it is not fo rmatted.
T abl e 33 Causes o f V olume Discov ery Failure and Requir ed Actions (continued) Action Cause If a management L U is configur ed on the port of the ext ernal stor age sy stem, perf orm one of the f ollo wing: • Mak e sure that at leas t one L U is used for dat a stor age and has a smaller L UN than the LUN o f the management L U .
9 Support and Other R es our ces R elated Doc umentati on • HP St orage W orks XP2 4000/XP20000 Disk Ar ra y Owner Gui de • HP St orage W orks XP2 4000/XP20000 L UN Manager User Gui de • HP St orage W orks XP2 4000/XP20000 R emote W eb Console U ser Guide Y ou can f ind these doc uments on the HP Manuals w ebsite: http://www .
Sub sc ripti on Serv ice HP r ecommends that y ou r egister y our pr oduct at the Subs cr iber's Cho ice f or Busines s websit e: http://www .hp.co m/go/e -updates After r egister ing, y ou will r ecei ve email no tifi cation of pr oduct enhancemen ts, ne w dri ver v ersi ons, f irm war e updates , and other pr oduct r esour ces .
A C onnecting Ext ernal S tor age S y stems This a ppendix pr ov ides conf igur ation inf ormati on for connec ting var iou s exte rnal stor age sy stems to the HP XP2 4000/XP20000 sto rage s yste ms.
T abl e 34 S ystem P arameters (AMS/WMS) (contin ued) P arameter Settings P arameters Windo w Names Set this par ameter to S tandard Mode . Hos t Connecti on Mode 1 Host C onnection Mode Do not spec if y an y parameter s. NO TE: As for AM S 1 000, AMS 5 00, AMS 200, and WMS 1 00, do not spec ify HISUP OFF mode , either .
T abl e 3 6 Relationship between the WWN of the P or t and Controller (AMS/WMS) (continued) WWN of the P or t Controller Model XXXXXXXXXXXXXXX 0 XXXXXXXXXXXXXXX 1 XXXXXXXXXXXXXXX 2 XXXXXXXXXXXXXXX 3 C.
T abl e 3 7 P ath Status and Ex amples of the Recov er y Procedur e (AMS/WMS) Ex amples of the Recovery Procedur e P at h Status Settings of the L U paths may ha ve been c hanged by L UN Manager .
T abl e 38 P ath status and e xamples of r ecov er y procedur e (P9 500 Disk Arr ay) Ex amples of Recov er y Procedur e P at h Status Settings of the L U paths may hav e been changed by L UN Manager .
T abl e 3 9 S ystem P arameters (Thunder 9 500V) P arameter Settings P arameters Windo w Names Start Attr ibute S yst em Startup Settings Spec ify this paramete r when the T hunder 9 500V s torage s ystem is in the one contr oller conf igurati on.
When y ou use the T hunder 9 500V st orage s yst em as an ext ernal st orage s yst em, the f ollo wing v ersions ar e reco mmended. If y ou use a 9 500V s tor age sy stem wh ose v ersi on is earlie r than the fo llow ing ver sions , the infor mation abou t the S A T A dr iv e may no t be display ed corr ectly .
to r ecov er the path status . F or other er ror s not desc r ibed in this sectio n, see “ T rou bleshooting f or XP Exter nal Stor age” (page 126) .
T abl e 43 P at h Status and Ex ampl es of the Reco very Procedur e (USP V/VM) Ex amples of the Recovery Procedur e P at h Status Settings of the L U paths may ha ve been c hanged by L UN Manager .
T abl e 44 P ath Status and Ex amples of th e Reco very Procedur e (USP V/VM) Ex amples of the Recovery Procedur e P at h Status Settings of the L U paths may ha ve been c hanged by L UN Manager .
T abl e 45 P ath Status and Examples o f t he Reco very Procedur e (Lightning 9 900V) Ex amples of the Recovery Procedur e P at h Status Settings of the L U paths may ha ve been c hanged by L UN Manager .
T abl e 46 P ath Status and Ex amples of the Recov ery Procedure (L ightning 99 00) Ex amples of the Recovery Procedur e P at h Status Settings of the L U paths may ha ve been c hanged by L UN Manager .
T abl e 4 7 P at h Status and Ex ampl es of the Reco very Procedur e (SVS200) Ex amples of the Recovery Procedur e P at h Status Settings of the L U paths may ha ve been c hanged by L UN Manager .
In the conf igur ation in F igur e 44 (page 147) , you can i dentify the logical v olumes r efe rr ing to Characteristic2 in the XP Exter nal Sto rage w indo ws . The f irst 3 2 char acters o f Characteristic2 indicate the W orld Wi de L UN Name that can be fo und on the EV A stor age sy stem side .
T abl e 50 S ystem P arameter (Sun Stor age T ek FlexL ine 380) P arameter Setting P arameter Windo ws Non-clust ered (DMP Su pport) host ty pe Sun S tor age T ek 2 54 0 When connec ting a Sun Stor age T ek 2 54 0 as an e xternal st orage s yst em, s et the sy stem par ameters of the Sun S tor age T ek 2 54 0 accor ding to T able 5 1 (page 148) .
T abl e 5 3 Restrictions for Connecting an EMC CLARiiON CX Series Restrictions V ersion The RAID-6 vo lume for the EMC CLARiiON CX s eri es can be used b y installing the pr ofile f or supporting the RAID-6 vo lume for the EMC CLARiiON CX s eri es. Ho we ver , the R AID-6 volume and the o ther R AID vo lume cannot be def ined in the same port.
When y ou connect an EMC S ymmetr ix ser ies as an e xternal s tor age sy stem , set the s yst em par ameters o f the EMC S ymme tri x ser ies accor ding to the settings in T able 5 4 (page 150) .
F ujitsu F ibreCA T CX Ser ie s S ys tem Opti on mode When y ou connect a F ujitsu Fibr eCA T CX ser ies a s an exter nal stor age sy stem , set s yst em option mode 7 2 5 of the local st orage s yst em.
B R equir ed V olume Ca pac it y f or E ac h Emulati on T ype When y ou map an ext ernal v olume as an inter nal volume , you need t o spec if y the emulati on type fo r the mapped volume . The max imum capac it y of an e xternal v olume depends on the spec ifi ed emulati on type .
Figur e 45 Idea of LDE V Capacit y Figur e 46 Ex ample of How t o Figure Out the V olume Capacit y (For OP EN -3 ) Ca pac it y L ist fo r E ach Em ulatio n T y pe This s ection e xplains the LDEV capac it y and vo lume capac it y fo r each emulati on type in the units of bloc ks and cylinde rs.
mainfr ame sy stem , the LDEV capac ity that can be made when an e xternal v olume is mapped is an integer w hen conv erted into a cy linder . T abl e 6 1 LDEV Capacity Infor mation for Each Emulation.
T abl e 6 2 V olume Capacity Information for Each Emulation T ype Maximum Number of LDEVs 1 Maximum Capacity of External V olume Minimum LDEV Capacity Base LDEV Capacity Emulation T ype Cy linders Blo.
C Adj usting the V olume Ca pac ities f or P air s When y ou cr eate a pair , the capac ity of an S -V OL must be the same as that o f a P - VOL . T o set a desir ed vo lume to a pair , you ma y need to adj ust the capac it y of the v olume . This sec tion des cr ibes the pr ocedure f or adjusting the v olume capac it y .
1 . Map the e xternal v olume (A ) as an internal v olume (B) of the local stor age s ys tem. S et the emulati on type as same as that o f the copy so urce v olume (C) . 2. C heck the capac ity of the inter nal volume (B) w her e the ext ernal v olume (A ) is mapped.
D T he ExP ath T ool This a ppendix e xplains how t o use the ExP ath tool. Ov erv ie w of the ExP ath T ool The ExP ath tool ena bles yo u to perfor m the Disconnect V olume command and the Chec k P ath & Restor e V olume command on the command line .
running R emote W eb Cons ole, s ee the HP Stor age W orks XP2 4000/XP20000 R emote W eb Cons ole User Gui de . • The ExP ath tool pr ogr am The ExP ath tool is cont ained in CD-ROM Dis c 2 , whic h is named Host P P . Use the ExP ath tool v ersion that is s ync hr oni z ed with the s tor age sy stem mi cr ocode versi on .
Cr eating an A uthenti cation F ile An au thenticati on file is an enc rypted f ile containing a us er ID and a pass wo rd . If the S VP has an IPv6 addr ess, an authen ticatio n file is r equir ed. T o cr eate an authe nticatio n file , perfo rm the fo llow ing command at the command pr ompt .
; Disconnect svpip 127.0.0.1 login root password disconnect E1-1 E1-2 disconnect E2-1 E2-2 The s vpip and login commands ar e used f or wr iting the authenticati on info rmation . If no authen tication f ile is cr eated, the a uthenticati on info rmation m ust be w ritten in a command f ile as sho wn a bov e .
- 1 : An err or occur r ed. If multiple e xter nal volumes ar e spec ifi ed, 0 r eturns o nly w hen all the commands on all the e xternal v olumes ar e finished succe ssfull y . When the chec kstatus co mmand is ex ecu ted, diff er ent ter mination codes w ill r eturn .
login Co mmand S yntax login user-ID password Desc ripti on Spec ifie s the login user ID and the pass wor d. T he svp ip command must be w ritte n befor e this command . If you s pecify an au thenticati on file w hen y ou run the ExP ath tool, this co mmand will be igno red .
c heckpath C ommand S yntax checkpath ExG-VPG [ ExG-VPG ...] Desc ripti on R esume using e xternal v olumes . This command e xec utes the same oper ation as the Check P aths & Restor e V olume command w hich y ou perfor m by using the V olume Oper ation w indow .
T erminati on Code - 1 : An err or occur r ed. See T able 64 (page 165) f or other ter mination code s. T abl e 64 T ermination Codes for the ch eckstatus Command and the External V olume Status Exter.
T abl e 64 T ermination Codes for the ch eckstatus Command and the External V olume Status (continued) External V olume Status T ermination Code Blockade Checking Disconnec t Destage Normal Ex ists Ex ists Exists Exists Ex ists 0x1F Ex ists: The v olumes in this status e x ist.
Glos sar y A AMS Adapt able module stor age. A T A Adv anced T echno logy Attac hment standar d. C CHA Channel ada pter . A dev ice that pr ov ides the inte rface between the ar ra y and the ext ernal hos t s yst em. Occasi onally , this term is u sed s ynon ymousl y with the t erm c hannel host int erface pr ocessor (CHIP) .
S S-V OL Secondary or r emote v olume. T he copy v olume that r ecei ves the dat a fr om the primary vo lume. S-V OL Sour ce volume (f or ShadowImage f or Mainfr ame) or secondary volume (f or Shado wImage for Mainfr ame , XP Contin uous Acces s, and XP Co ntinuous A ccess Jour nal) .
Inde x A Attr ibutes list of em ulation type , 1 7 B Block manage ment, ExG , 1 7 C Cac he logical partition , 1 8 memory , 1 8 Channels E S CON or FICON , 2 5 Concept , 1 3 con venti ons stor age cap.
HP Subs cr iber's Choi ce for Bu siness, 1 33 pr oduct manuals , 1 3 2 X XP Exter nal Stor age Requir ements, 3 7 1 7 0 Index.
Ein wichtiger Punkt beim Kauf des Geräts HP (Hewlett-Packard) XP20000 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HP (Hewlett-Packard) XP20000 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HP (Hewlett-Packard) XP20000 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HP (Hewlett-Packard) XP20000 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HP (Hewlett-Packard) XP20000 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HP (Hewlett-Packard) XP20000 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HP (Hewlett-Packard) XP20000 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HP (Hewlett-Packard) XP20000. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HP (Hewlett-Packard) XP20000 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
