Benutzeranleitung / Produktwartung PCLA8205B des Produzenten HP (Hewlett-Packard)
Zur Seite of 35
EtherExpress TM PRO/10+ ISA PCLA8205B Installation Guide.
Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
1 Connecting to a Netware 3.12 Server Windows for Workgroups Version 3.11 1 Connecting to a Netware 3.12 Server Windows for Workgroups Version 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • Intel EtherExpress ISA 10MBS Ethernet adapter card and drivers disk Ver.
1 Connecting to a Netware 3.12 Server Windows for Workgroups Version 3.11 7 Remove the Intel drivers diskette and reboot the machine, and boot to a DOS prompt. 8 Insert Netware Client for DOS and Windows Disk 1 and execute “A:INSTALL.” 9 Change the settings to match the following and then option 6 to continue the installation.
1 Connecting to a Netware 3.12 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2. • Intel EtherExpress PRO ISA ethernet card and drivers disk Ver. 2.3. • Driver Name: El90X.DOS Size: 45KB Date: 3/21/97 • Novell Netware 3.
1 Connecting to a Netware 3.12 Server Windows 95 SR2 10 Click “OK” to the “Network” dialog box to provide computer / work group names. 11 Specify your Computer Name, Workgroup, and Computer Description. (If you do not have the required information, contact your network administrator) 12 Click on “Close” button, and files will copy.
2 Connecting to a Netware 4.11 Server Windows for Workgroups Version 3.11 2 Connecting to a Netware 4.11 Server Windows for Workgroups Version 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • Intel EtherExpress ISA 10MBS Ethernet adapter card and drivers disk Ver.
2 Connecting to a Netware 4.11 Server Windows for Workgroups Version 3.11 7 Remove the Intel drivers diskette and reboot the machine, and boot to a DOS prompt. 8 Insert Netware Client for DOS and Windows Disk 1 and execute “A:INSTALL.” 9 Change the settings to match the following and then option 6 to continue the installation.
2 Connecting to a Netware 4.11 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2. • Intel EtherExpress PRO ISA ethernet card and drivers disk Ver. 2.3. • Driver Name: El90X.DOS Size: 45KB Date: 3/21/97 • Novell Netware 4.
2 Connecting to a Netware 4.11 Server Windows 95 SR2 10 Click “OK” to the “Network” dialog box to provide computer / work group names. 11 Specify your Computer Name, Workgroup, and Computer Description. (If you do not have the required information, contact your network administrator) 12 Click on “Close” button, and files will copy.
3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Version 3.11 3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Version 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • Intel EtherExpress ISA 10MBS Ethernet adapter card and drivers disk Ver.
Windows for Workgroups Version 3.11 8 After windows loads, open the “NETWORK” program group, and double- click the “Network Setup.” 9 Select the “Networks” button in the “Network Setup” dialog box. 10 Click on the “Install Microsoft Windows Network:” option, and click “OK.
3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Version 3.11 21 To complete the installation, click on “Restart Computer” button in the “Windows Setup” dialog box.
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2. • Intel EtherExpress PRO ISA ethernet card and drivers disk Ver. 2.3. • Driver Name: El90X.DOS Size: 45KB Date: 3/21/97 • Microsoft Windows NT Server 3.
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 10 Click “OK” to the “Network” dialog box to provide computer / work group names. 11 Specify your Computer Name, Workgroup, and Computer Description.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.51 Requirements • HP Vectra with Microsoft Windows NT Workstation 3.51 installed. • Intel EtherExpress PRO ISA Ethernet card and drivers disk Ver.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 9 Select the “Network” icon, and click “YES” to install NT networking. 10 Insert the Windows NT Workstaion CD. 11 In the “Windows NT Setup”, set the path to your NT files, and click on the “Continue” button.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 Windows NT Workstation Version 4.0 Requirements • HP Vectra with Windows NT Workstation 4.0 Service Pack 3. • Intel EtherExpress PRO/10 ISA ethernet card and drivers disk ver.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 9 Log onto the machine with dministrator privileges. (If you do not have the required information, contact your network administrator) 10 Click on “Start” and move to “Settings”, open the “Control Panel” group and double-click the “Network” Icon.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 27 After “Network has been installed on this computer” click on “Finish.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0.
4 Connecting to a Windows NT Server 4.0 Windows for Workgroups Version. 3.11 4 Connecting to a Windows NT Server 4.0 Windows for Workgroups Version. 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • Intel EtherExpress ISA 10MBS Ethernet adapter card and drivers disk Ver.
4 Connecting to a Windows NT Server 4.0 Windows for Workgroups Version. 3.11 8 After windows loads, open the “NETWORK” program group, and double- click the “Network Setup.” 9 Select the “Networks” button in the “Network Setup” dialog box.
4 Connecting to a Windows NT Server 4.0 Windows for Workgroups Version. 3.11 21 To complete the installation, click on “Restart Computer” button in the “Windows Setup” dialog box.
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2. • Intel EtherExpress PRO ISA ethernet card and drivers disk Ver. 2.3. • Driver Name: El90X.DOS Size: 45KB Date: 3/21/97 • Microsoft Windows NT Server 4.
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 10 Click “OK” to the “Network” dialog box to provide computer / work group names. 11 Specify your Computer Name, Workgroup, and Computer Description.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.51 Requirements • HP Vectra with Microsoft Windows NT Workstation 3.51 installed. • Intel EtherExpress PRO ISA Ethernet card and drivers disk Ver.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 10 Insert the Windows NT Workstaion CD. 11 In the “Windows NT Setup”, set the path to your NT files, and click on the “Continue” button.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 Windows NT Workstation 4.0 Requirements • HP Vectra with Windows NT Workstation 4.0 Service Pack 3. • Intel EtherExpress PRO/10 ISA ethernet card and drivers disk ver. 3.5. Driver Name: OEMSETUP.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 9 Log onto the machine with dministrator privileges. (If you do not have the required information, contact your network administrator) 10 Click on “Start” and move to “Settings”, open the “Control Panel” group and double-click the “Network” Icon.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 27 After “Network has been installed on this computer” click on “Finish. 28 To complete the installation, select “Yes” to reboot your computer.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0.
.
V ersion Number Intel10 Rev .1.
Ein wichtiger Punkt beim Kauf des Geräts HP (Hewlett-Packard) PCLA8205B (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HP (Hewlett-Packard) PCLA8205B noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HP (Hewlett-Packard) PCLA8205B - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HP (Hewlett-Packard) PCLA8205B reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HP (Hewlett-Packard) PCLA8205B erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HP (Hewlett-Packard) PCLA8205B besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HP (Hewlett-Packard) PCLA8205B verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HP (Hewlett-Packard) PCLA8205B. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HP (Hewlett-Packard) PCLA8205B gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
