Benutzeranleitung / Produktwartung LB-2 des Produzenten HotBrick
Zur Seite of 80
HotBrick Network Solutions Load Balancer LB-2 User’s Guide HotBrick Network Solutions.
.
HotBrick Network Solutions T ABLE OF C ONTENTS 1: INTRODUCTION .............................................................................................................................. 1 Internet Features .........................................
HotBrick Network Solutions 9: OPERATION AND STATUS ....................................................................................................... .. 61 Operation ................................................................................
HotBrick Network Solutions 1: Introduction Congratulations on the purchase of your new HotBrick Load Balancer LB-2. The Load Balancer provides Shared Broadband Internet Access for all LAN users.
HotBrick Network Solutions • PPPoE Session Management Multiple PPPoE sessions are supported and you can choose to “map” sessions to individual PCs if desired. • Multiple IP Address Support If your ISP allocates you multiple IP addresses, these are also supported and you can “map” IP addresses to individual PCs if desired.
HotBrick Network Solutions Other Features • 4-Port Switching Hub The Load Balancer LB-2 incorporates a 4-port 10 /100BaseT switching hub, making it easy to create or extend your LAN. • DHCP Server Support D ynamic H ost C onfiguration P rotocol provides a dynamic IP address to PCs and other devices upon request.
HotBrick Network Solutions Package Contents The following items should be included: • The Load Balancer LB-2 Unit • Power Adapter • Quick Installation Guide • CD-ROM containing the on-line manual. If any of the above items are damaged or missing, please contact your dealer immediately.
HotBrick Network Solutions Also, some Status and Error conditions are indicated by combinations of LEDs, as shown below LED Action Condition WAN1 LINK/ACT & 10M/100M LEDs flash alternatively. Firmware Download in progress. WAN1 LINK/ACT & 10M/100M LEDs flash concurrently.
HotBrick Network Solutions Rear Panel Load Balancer LB-2 Figure 2: Rear Panel LB-2 DC 5V Connect the supplied power adapter here. WAN 2 Connect the 2 nd Broadband Modem here, if available. Reset Button When pressed and released, the Load Balancer will reboot (restart) within 1 second.
HotBrick Network Solutions Figure 3: Windows TFTP utility LB-2 • Enter the name of the firmware upgrade file on your PC, or click the "Browse" button to locate the file. • Enter the LAN IP address of the Load Balancer LB-2 in the "Server IP" field.
HotBrick Network Solutions 2: Basic Setup Overview Basic Setup of your HotBrick Load Balancer LB-2 involves the following steps: 1. Attach the HotBrick Load Balancer LB-2 to one (1) PC, and configure it for your LAN. 2. Install your HotBrick Load Balancer LB-2 in your LAN, and connect the Broadband Modem or Modems.
HotBrick Network Solutions • The "User Name" is always admin • You can and should set a password, using the following Admin Password screen. No Response ? • Is your PC using a Fixed IP address ? If so, you must configure your PC to use an IP address within the range 192.
HotBrick Network Solutions 9. Select LAN & DHCP from the menu. You will see a screen like the example below. Figure 6: LAN & DHCP 10. Ensure these settings are suitable for your LAN: • The default settings are suitable for many situations. • See the following table for details of each setting.
HotBrick Network Solutions default, act as DHCP clients. This setting is called Obtain an IP address automatically .) • DHCP Server Setup - If you are already using a DHCP Server, the DHCP Server setting must be Disabled , and the existing DHCP server must be set to provide the IP address of the Load Balancer LB-2 as the Default Gateway .
HotBrick Network Solutions 2. Installing the HotBrick Load Balancer LB-2 in your LAN Figure 7: Installation Diagram LB-2 1. Ensure the HotBrick Load Balancer LB-2 and the DSL/Cable modem are powered OFF. Leave the modem or modems connected to their data line.
HotBrick Network Solutions • For each PC connected to the LAN ports, the corresponding LAN LED (either 10 or 100 ) should be ON. 3. Configuring the HotBrick Load Balancer LB-2 for Internet Access Select Primary Setup from the menu, to see a screen like the example below.
HotBrick Network Solutions Settings – Primary Setup Connection Mode Select the appropriate setting: • Enable – Select this if you have connected a broadband modem to this port. • Disable – Select this if there is no broadband modem connected to this port.
HotBrick Network Solutions Optional • Host name – This is required by some ISPs. If your ISP provided a Host Name, enter it here. Otherwise, you can use the default value. • Domain name – This is required by some ISPs. If your ISP provided a Domain Name, enter it here.
HotBrick Network Solutions 4: Configure PCs on your LAN Overview For each PC, the following may need to be configured: • TCP/IP network settings • Internet Access configuration TCP/IP Settings If using the default Load Balancer LB-2 settings, and the default Windows 95/98/ME/2000/XP TCP/IP settings, no changes need to be made.
HotBrick Network Solutions 7. Select "Set up my connection manually" and click Next . 8. Check "Connect using a broadband connection that is always on" and click Next . 9. Click Finish to close the New Connection Wizard. Setup is now completed.
HotBrick Network Solutions Fixed IP Address By default, most Unix installations use a fixed IP Address. If you wish to continue using a fixed IP Address, make the following changes to your configuration. • Set your Default Gateway to the IP Address of the Load Balancer LB-2.
HotBrick Network Solutions 3: Advanced Port Setup Overview • Port Options contains some options, which can be set on either or both WAN ports. For most situations, the default values are satisfactory. • Load Balance screen is only functional if you are using both WAN ports.
HotBrick Network Solutions Settings – Port Options Connection Validation • Health Check – Disable will not do Alive Indicator Check. By default health check is enable. Health checking is performing an ICMP echo request and HTTP packets to the specific destination that could be either: 1.
HotBrick Network Solutions Load Balance This screen is only operational if using Internet connections on both WAN ports. Figure 10: Load Balance These settings are only functional if using both WA N ports. If using both WAN ports, these settings determine the proportion of traffic sent over each port.
HotBrick Network Solutions NAT Statistics This section displays the current data about WAN 1 and WAN 2. You can use this information to help you "fine-tune" the settings above. Interface Statistics This section displays cumulative statistics.
HotBrick Network Solutions Advanced PPPoE The screen is required in order to use multiple PPPoE sessions on the same WAN port. It can also be used to manually connect or disconnect a PPPoE session.
HotBrick Network Solutions Advanced PPTP This screen is only useful if using the PPTP connection method. Figure 12: Advanced PPTP Settings – Advanced PPTP WAN Port Select the desired Port, then click the "Select" button. The data for the selected Port will then be displayed in the WAN IP Account section.
HotBrick Network Solutions 4: Advanced Setup Overview The following advanced features are provided. • Host IP Setup • Virtual Servers • Custom Virtual Server • Special Applications • Dynamic DNS • Multi DMZ • Advanced Features • UPnP This chapter contains details of the configuration and use of each of these features.
HotBrick Network Solutions Figure 13 Host IP Setup Settings – Host IP Setup Host Network Identity This section identifies each Host (PC) • Host List – When adding a new Host, ignore this list. To edit an existing entry, select it from the list, and click the "Select" button.
HotBrick Network Solutions Host Network Binding • Bind WAN port/Session – Select Enable if you wish to associate this PC with a particular PPPoE Session. All traffic for that PC will then use the selected PPPoE port and session. • Binding Method – Suppose your PC is bound to WAN1 port, now you are selecting “Strict Binding”.
HotBrick Network Solutions Virtual Servers This feature allows you to make Servers on your LAN accessible to Internet users. Normally, Internet users would not be able to access a server on your LAN because: • Your Server's IP address is only valid on your LAN, not on the Internet.
HotBrick Network Solutions to allow users to connect to your Virtual Servers using a URL, instead of an IP Address. e.g. HTTP://my_domain_name.dyndns.org FTP://my_domain_name.dyndns.org Figure 15 Virtual Server Settings – Virtual Server Enable Use this to Enable or Disable each Virtual server as required.
HotBrick Network Solutions Custom Virtual Servers This screen allows you to define your own Server types, for situations when the desired Server type is not listed on the Virtual Servers screen. Figure 16 Custom Virtual Servers Settings – Custom Virtual Servers Select Custom Server Name Server List If creating a new entry, ignore this list.
HotBrick Network Solutions • Protocol Type – Select the network protocol used by this sever type. • LAN Port Range – Enter the range of port number used for outgoing traffic from this Server. If only a single port is required, enter it in both fields.
HotBrick Network Solutions Special Applications If you use Internet applications which have non-standard connections or port numbers, you may find that they do not function correctly because they are blocked by the firewall in the Load Balancer.
HotBrick Network Solutions Enable Use this to Enable or Disable this Special Application as required. Name Enter a descriptive name to identify this Special Application. Outgoing Protocol Select the protocol used by this application, when sending data to the remote server or PC.
HotBrick Network Solutions Dynamic DNS Dynamic DNS is very useful when combined with the Virtual Server feature. It allows Internet users to connect to your Virtual Servers using a URL, rather than an IP Address. This also solves the problem of having a dynamic IP address.
HotBrick Network Solutions Settings – Dynamic DNS Dynamic DNS Service Use this to Enable/Disable the Dynamic DNS feature, and select the required service provider. • Disable – Dynamic DNS is not used. • TZO – Select this to use the TZO service (www.
HotBrick Network Solutions Multi DMZ This feature allows each WAN port IP address to be associated with one (1) computer on your LAN. All outgoing traffic from that PC will be associated with that WAN port IP address.
HotBrick Network Solutions Settings – Multi DMZ Enable Use this to enable or disable the DMZ setting, as required. Name Enter a name to assist you to remember this setting. This name has no effect on the operation. For Static IP Public IP address Enter the WAN port (Internet) IP address you wish to associate to a PC.
HotBrick Network Solutions UPnP With UPNP (Universal Plug & Play) function, it can easily setup and configure an entire network, enable discovery and control of networked devices and services. Figure 20 UPnP Settings – UPnP UPnP Option If you Enable UPnP, then this two wan router will become one of the entire local network.
HotBrick Network Solutions Advanced Features This screen allows you to change some advanced settings: • NAT – NAT (Network Address Translation) is the technology which allows a number of LAN PCs to share one (1) Internet IP address. These settings rarely need to be changed.
Session Pe rsistency ( Protocol, P ort Ra nge) Enabled Session 1 Sessi on 2 Session 3 Session 4 Session 5 Sessi on 6 BO T H BO T H BO T H BO T H BO T H BO T H 0 ~ 0 0 ~ 0 0 ~ 0 0 ~ 0 0 ~ 0 0 ~ 0 Sessi.
HotBrick Network Solutions Remote Access Configuration • Remote Upgrade – If enabled, you can use the supplied Windows program to remotely upgrade the Firmware. If not enabled, upgrades must be performed by a PC on the LAN. • Remote Web-based setup - – If enabled, access to the Web-based interface is available via the Internet.
HotBrick Network Solutions Interface Binding SMTP (Simple Mail Transport Protocol) Binding Unless you are using E-mail accounts from different ISPs on each port, you can ignore these settings. Some ISPs configure their E-mail Servers so they will not accept E-mail from IP addresses not allocated by themselves.
HotBrick Network Solutions 5: Security Management Overview • Block URL It can block specific website by configure IP address, URL or Key words • Access filter You can block all Internet access or select block well-known port or block user define ports by groups.
HotBrick Network Solutions Figure 22 Block URL Settings – Block URL Access Group This allows you have different blocking rules for different Groups of PCs. • All PCs (users) are in the Default Group unless moved to another group on the Host IP screen.
HotBrick Network Solutions Access Filter The network Administrator can use the Access Filter to gain fine control over the Internet access and applications available to LAN users. • Five (5) user groups are available, and each group can have different access rights.
HotBrick Network Solutions Filter Setting Select the desired option for this Group: • No filtering – Nothing is blocked, Internet access is not restricted. • Block All Access – Everything is blocked, Internet access is not available. • Block selected items – Items selected on this screen are blocked.
HotBrick Network Solutions Session Limit This new feature allows to drop the new sessions from both WAN and LAN side. If the new sessions number are exceed the maximum sessions in a sampling time. Figure 24: Session Limit Session Limit Sampling Time The period to count the new session.
HotBrick Network Solutions Firewall Exception System Firewall Exception Rules: The rules with which any received packets is complied, the packets will not processed by Firewall or NAT module, but to be processed directly by system protocol stack.
HotBrick Network Solutions 6: QoS Configuration Overview The Load Balancer provides QoS, which supports the high quality of network service. Because it will classify outgoing packets based on some policies defined by users, make some real-time applications to get better response or performance.
HotBrick Network Solutions IP TOS ( Type of Service) Feature • Process TOS Field –An 8 bits field in the IP packet header designed to contain values indicating how each packet should be handled in the network. If you choose "enable" then it will enable this function to process IP Type of Service field.
HotBrick Network Solutions Data – Policy Configuration. Network Admission Policy This section identifies each policy • Policy Name List – When adding a new Policy, ignore this list. To edit an existing entry, select it from the list, and click the "Select" button.
HotBrick Network Solutions 7: Management Assistant Overview The following advanced features are provided. • SNMP • Email Alert • SNMP • Syslog • Upgrade Firmware This chapter contains details of the configuration and use of each of these features.
HotBrick Network Solutions Settings – SNMP System Information • Contact Person – The name of the person responsible for this device. • Device name – The name of the Load Balancer.
HotBrick Network Solutions Settings – Email Alert Email Alert • Enable – This will enable email alert to send an warning email when WAN port was disconnected. • Disable – This will disable email alert not to send an warning email when WAN port was disconnected.
HotBrick Network Solutions Syslog This feature can send real time system information on the web page or to the specified PC. Syslog Configuration – Syslog Configuration allow you where to send system information to other machine or not. There are up to three machines you can choose to send your system log.
HotBrick Network Solutions Syslog Configuration Syslog Global • Enable – Set to “enable”, if you want to send system log messages to other machine. Keep Sent Messages • Enable – Checked this, if you want to keep sent messages,otherwise the sent messages will be deleted.
HotBrick Network Solutions Admin Password The password screen allows you to assign a password to the Load Balancer. Figure 31: Admin Password Screen Enter the desired password, re-enter it in the Verify Password field, then save it.
HotBrick Network Solutions Upgrade Firmware This Upgrade Firmware Screen allows you to upgrade firmware or backup system configuration by using HTTP upgrade. Figure 33: Firmware Upgrade Screen You can backup your system configuration by press “save” button of Save System Configuration.
HotBrick Network Solutions 8: Advanced LAN Configuration Overview These screens and settings are provided to deal with non-standard situations, or to provide additional options for advanced users. Existing DHCP Server If your LAN already has a DHCP Server, and you wish to continue using it, the following configuration is required.
HotBrick Network Solutions Note: If there is an entry or entries in the Routing table with an Index of zero ( 0 ), these are System entries. You can not modify or delete these entries. Settings – Static Routing Entry Index • If adding a new entry, ignore this field.
HotBrick Network Solutions For the Load Balancer Gateway's Routing Table For the LAN shown above, with 2 routers and 3 LAN segments, the Load Balancer requires 2 entries as follows. Entry 1 (Segment 1) Destination IP Address 192.168.2.0 Network Mask 255.
HotBrick Network Solutions 9: Operation and Status Operation Once both the Load Balancer and the PCs are configured, operation is automatic. However, there are some situations where additional Internet configuration may be required: Refer to Chapter 4 - Advanced Features for further details.
HotBrick Network Solutions Data – System Status WAN Information • Connection Status – Current status – either "Connected" or "Not connected". • Connection Type – The type of connection used – DHCP, Fixed IP, PPPoE, or PPTP.
HotBrick Network Solutions Buttons • Refresh – Update the data on screen. • Restart – Restart (reboot) the Load Balancer. • Restore Factory Defaults – This will delete all existing settings, and restore the factory default settings. See below for details.
HotBrick Network Solutions WAN Status Use the WAN Status link on the main menu to view this screen. Figure 38 WAN Status Data – System Status NAT Statistics This section displays data for each WAN port. • Connection status – This will display either Connected or Not Connected .
HotBrick Network Solutions NAT Status This screen is displayed when you click the "Check NAT Detail" button on the WAN Status screen. Figure 39 NAT Status Data – NAT Status LAN IP Info • IP Address – The LAN IP Address of the Load Balancer.
HotBrick Network Solutions NAT Connections This displays the current number of active connections. For further details, click the "View Connection" list button. Errors Statistics are displayed for Checksum errors, number of retries, and number of bad packets.
HotBrick Network Solutions Appendix A Specifications Model Load Balancer Dimensions 245mm (W) x 137mm (D) x 30mm (H) Operating Temperature 0 ° C to 40 ° C Storage Temperature -10 ° C to 70 ° C Net.
HotBrick Network Solutions Appendix B Windows TCP/IP Setup Overview TCP/IP Settings If using the default Load Balancer setti ngs, and the default Windows 95/98/ME/2000 TCP/IP settings, no changes need to be made.
HotBrick Network Solutions Figure 41: IP Address (Win 95) Ensure your TCP/IP settings are correct, as follows: Using DHCP To use DHCP, select the radio button Obtain an IP Address automatically . This is the default Windows settings. Restart your PC to ensure it obtains an IP Address from the Load Balancer.
HotBrick Network Solutions • On the DNS Configuration tab, ensure Enable DNS is selected. If the DNS Server Search Order list is empty, enter the DNS address provided by your ISP in the fields beside the Add button, then click Add . Figure 43: DNS Tab (Win 95/98) Checking TCP/IP Settings - Windows 2000: 1.
HotBrick Network Solutions Figure 45: TCP/IP Properties (Win 2000) 5. Ensure your TCP/IP settings are correct: Using DHCP To use DHCP, select the radio button obtain an IP Address automatically . This is the default Windows settings. Restart your PC to ensure it obtains an IP Address from the Load Balancer.
HotBrick Network Solutions Checking TCP/IP Settings - Windows XP: 1. Select Control Panel - Network Connection. 2. Right click the Local Area Connection and choose Properties . You should see a screen like the following: Figure 46: Network Configuration (Windows XP) 3.
HotBrick Network Solutions Figure 47: TCP/IP Properties (Windows XP) 5. Ensure your TCP/IP settings are correct. Using DHCP To use DHCP, select the radio button obtain an IP Address automatically . This is the default Windows settings. Restart your PC to ensure it obtains an IP Address from the Load Balancer.
HotBrick Network Solutions Appendix C Troubleshooting Overview This chapter covers some common problems that may be encountered while using the Load Balancer and some possible solutions to them. If you follow the suggested steps and the Load Balancer still does not function properly, contact your dealer for further advice.
HotBrick Network Solutions Use the Special Applications feature to allow the use of Internet applications which do not function correctly. If this does solve the problem you can use the DMZ function. This should work with most applications, but: • It is a security risk, since the firewall is disabled for the DMZ PC.
Ein wichtiger Punkt beim Kauf des Geräts HotBrick LB-2 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie HotBrick LB-2 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für HotBrick LB-2 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von HotBrick LB-2 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über HotBrick LB-2 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon HotBrick LB-2 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von HotBrick LB-2 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit HotBrick LB-2. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei HotBrick LB-2 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
