Benutzeranleitung / Produktwartung DN 10DY des Produzenten Honeywell
Zur Seite of 24
1 INSTRUCTION MANUAL AND SAFETY INSTRUCTIONS FOR CORDLESS ANGLE DRILL MODEL DN 10DY Variable speed WARNING: Improper and unsafe use of this power tool can result in death or serious bodily injury! This manual contains important information about product safety.
2 — CONTENTS — Page IMPORTANT INFORMATION .................................................................................... 3 MEANINGS OF SIGNAL WORDS ............................................................................. 3 SAFETY IMPORTANT SAFETY INSTRUCTIONS FOR USING ALL POWER TOOLS .
3 IMPORTANT INFORMATION Read and understand all of the operating instructions, safety precautions and warnings in the Instruction Manual before operating or maintaining this power tool. Most accidents that result from power tool operation and maintenance are caused by the failure to observe basic safety rules or precautions.
4 SAFETY IMPORTANT SAFETY INSTRUCTIONS FOR USING ALL POWER TOOLS WARNING: Death or serious bodily injury could result from improper or unsafe use of power tools. To avoid these risks, follow these basic safety instruc- tions: READ ALL INSTRUCTIONS 1. NEVER TOUCH MOVING PARTS.
5 8. KEEP CHILDREN AWAY. Do not let visitors contact tool. All visitors should be kept safely away from work area. 9. DON ’ T FORCE TOOL. It will do the job better and safer at the rate for which it was intended. 10. USE RIGHT TOOL. Don ’ t force small tool or attachment to do the job of a heavy-duty tool.
6 20. HANDLE TOOL CORRECTLY. Operate the tool according to the instructions provided herein. Do not drop or throw the tool. Never allow the tool to be operated by children, individuals unfamiliar with its operation or unauthorized personnel. 21. CHECK FOR LIVE WIRES.
7 IMPORTANT SAFETY INSTRUCTIONS FOR USE OF THE CORDLESS ANGLE DRILL WARNING: Death or serious bodily injury could result from improper or unsafe use of the cordless angle drill. To avoid these risks, follow these basic safety instructions: 1. Never place hands or other body parts near the drill bit or chuck during operation.
8 Table 1 RECOMMENDED MINIMUM AWG SIZE FOR EXTENSION CORDS FOR BATTERY CHARGERS AC Input Rating Amperes* AWG Size of Cord Equal to or but less Length of Cord, Feet (Meter) greater than than 25 (7.
9 1. NEVER disassemble the battery. 2. NEVER incinerate the battery, even if it is damaged or is completely worn out. The battery can explode in a fire. 3. NEVER short-circuit the battery. 4. NEVER insert any objects into the battery charger ’ s air vents.
10 䡬 Battery (EB9, EB9B) Fig. 1 Terminal Hole Nameplate OPERA TION AND MAINTENANCE NOTE: The information contained in this Instruction Manual is designed to assist you in the safe operation and maintenance of the power tool.
11 MODEL UC12Y UC14YF / UC14YF2 Input power source Single phase: AC 120V 60 Hz Charging time EB12 ....... Approx. 60 min. EB12 ....... Approx. 45 min. (At a temperature of 68 ° (F20 ° C)) EB12B .... Approx. 60 min. Charging voltage DC 2.4 – 12V DC7.
12 ACCESSORIES WARNING: Accessories for this power tool are mentioned in this Instruction Manual. The use of any other attachment or accessory can be dangerous and could cause injury or mechanical damage. STANDARD ACCESSORIES OPTIONAL ACCESSORIES.....
13 2. Phillips bit Use ..... Driving of wood screws and tapping screws with the head of a plus groove Size .... No. 1, No. 2, No. 3 3. Slotted bit Use ..... Driving of wood screws with the head of a minus groove Size .... 1/8" (3mm), 5/32" (4mm), 1/4" (6.
14 REMOVAL AND INSTALLATION METHOD OF BATTERY 䡬 How to remove the battery. Hold the handle tight. Press the latch located at the front of the battery and pull out the battery. (Fig. 9) 䡬 How to install the battery. Position the battery so that the latch faces toward the switch trigger in the handle and insert the battery.
15 3. Charging 䡬 When the battery is connected to the battery charger, charging will commence and the pilot lamp will light in red. (See Table 2) NOTE: If the pilot lamp does not light, pull out the plug from the receptacle and check if the battery is properly mounted.
16 (3) Regarding recharging time (At 68 ° F (20 ° C)) Depending on the combination of the charger and batteries, the charging time will become as shown in Table 4. NOTE: The charging time may vary according to temperature and power source voltage. 4.
17 How to make the batteries perform longer. (1) Recharge the batteries before they become completely exhausted. When you feel that the power of the tool becomes weaker, stop using the tool and recharge its battery. If you continue to use the tool and exhaust the electric current, the battery may be damaged and its life will become shorter.
18 3. Check the direction of rotation. The bit rotates clockwise (viewed from the rear side) by pushing the R-side of the selector button. The L-side of the selector button is pushed to turn the bit counterclockwise. (See Fig. 12) (The and marks are provided on the body.
19 MAINTENANCE AND INSPECTION CAUTION: Pull out battery before doing any inspection or maintenance. 1. Checking the condition of the bit. The bits should be checked regularly. If worn or broken bits can slip or decrease the efficiency of the motor and burn it out.
20.
21 Item Part Name No. 1 Metal 2 Spindle 3A Drill Chuck 10TLRD-N 4 Flat Hd. Screw (Left Hand) M5 × 17 5 Bind Screw M3 × 7 6 Fin 7 Second Pinion 8 Motor 9 Internal Wire (A) 10 Internal Wire (A) 11 Hou.
22.
23.
24 205 Code No. C99058363 Printed in Ireland Please contact HITACHI KOKI U.S.A. LTD. at 1-800-59-TOOLS (toll free), or HITACHI AUTHORIZED POWER TOOL SERVICE CENTER regarding COLLEC- TION. Issued by Shinagawa Intercity T ower A, 15-1, Konan 2-chome, Minato-ku, T okyo 108-6020, Japan Distributed by 3950 Steve Reynolds Blvd.
Ein wichtiger Punkt beim Kauf des Geräts Honeywell DN 10DY (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Honeywell DN 10DY noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Honeywell DN 10DY - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Honeywell DN 10DY reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Honeywell DN 10DY erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Honeywell DN 10DY besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Honeywell DN 10DY verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Honeywell DN 10DY. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Honeywell DN 10DY gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
