Benutzeranleitung / Produktwartung F3040 des Produzenten Homelite
Zur Seite of 22
OPERA T OR’S MANUAL T rimmer / Brushcutter F3040 UT70131 SAVE THIS MANUAL FOR FUTURE REFERENCE Your new trimmer has been engineered and manufactured to Homelite’s high standard for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
2 ■ ■ ■ ■ ■ Safety ......................................................................................................................... ............................................ 2 - 3 ■ ■ ■ ■ ■ Symbols .....................
3 ■ ■ ■ ■ ■ Inspect the unit before each use for loose fasteners, fuel leaks etc. Replace any damaged parts before use. ■ ■ ■ ■ ■ The string head or blade will rotate during carburettor adjustments.
4 SYMBOLS Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and more safely. SYMBOL NAME EXPLANATION Safety Alert Symbol Indicates danger, warning or caution.
5 SAVE THESE INSTRUCTIONS Weigh t Without fuel, cutting attachment ......................................................................................... .................. 5.48 Kg With blade ........................................................
6 UNP ACKING INSTRUCTIONS ■ ■ ■ ■ ■ Carefully remove the product from the carton. ■ ■ ■ ■ ■ Inspect the product to make sure no breakage or damage occurred during carriage. ■ ■ ■ ■ ■ Do not discard the packing material until you have inspected and operated the product.
7 ASSEMBL Y Fig. 2 CLAMP FLAT WASHER LOCK WASHER HEX NUT STRAP HANGER BOLT 1/4-20 x 1 1/2 in SPACER CLAMP FRONT HANDLE See Figure 2. A barrier handle should be used for ensuring the best control and maximising operator safety.
8 ASSEMBL Y SILENCER GUARD ASSEMBLY See Figure 4. 1 . Remove silencer guard and two screws from the owner’s kit. 2 . Attach the silencer guard to the rear housing. NOTE: Make sure the bent end of the silencer guard fits securely into the opening of the rear housing.
9 ASSEMBL Y BLADE GUARD See Figure 6. 1 . Attach the blade guard to the mounting bracket; install the four screws (10-24 x 3/4 in) from the top of the mount- ing bracket through the blade guard and into the threaded mounting plates. 2 . Using the torque wrench supplied, tighten all four screws securely.
10 ASSEMBL Y BLADE GUARD BLADE CUPPED WASHER BLADE NUT HOLDING PIN Fig. 8 SPANNER (13 mm) UPPER FLANGE WASHER INSTALLING THE BLADE See Figure 8. 1 . Place the upper flange washer over the gear shaft with the hollow side toward the blade guard. 2 . Centre the blade on the upper flange, making sure the blade sits flat.
11 FUEL AND REFUELLING HANDLING THE FUEL SAFELY ■ ■ ■ ■ ■ Always handle fuel with care. It is highly flammable. ■ ■ ■ ■ ■ Always refuel outdoors where there are no sparks and flames. Do not inhale fuel vapour. ■ ■ ■ ■ ■ Do not let petrol or oil come in contact with your skin.
12 ADVANCING THE STRING ADVANCING STRING USING THE EZ LINE™ TAP ADVANCE SYSTEM String advance is controlled by tapping string head on grass while running engine at full throttle. 1 . Run engine at full throttle. 2 . Tap string head on ground to advance string.
13 W ARNING: Extreme care must be taken when using blades to insure safe operation. Read the safety information for safe operation using the blade, refer to “Specific Safety Rules for Brushcutter and Blade Use” earlier in this manual. ■ Always hold brushcutter with both hands when operating.
14 1 W ARNING: Never start or run the engine inside a closed or poorly ventilated area; breathing exhaust fumes can kill. STARTING AND STOPPING See Figures 14 and 15. NOTE: The unit is equipped with an automatic choke feature. The starting instructions for this feature are different from units with a manual choke.
15 ■ You may make adjustments and repairs described here. For other repairs, have the trimmer serviced by an authorised service dealer. ■ Consequences of improper maintenance may include excess carbon deposits resulting in loss of performance and discharge of black oily residue dripping from the silencer.
16 STRING REPLACEMENT See Figures 18, 19, 20, and 21. 1 . Stop the engine, disconnect the sparking plug wire. Hold the string head and unscrew the spool retainer. Turn clockwise. 2 . Remove the spool from the string head. NOTE: Keep the spring attached to the spool.
17 2 1 3 ST O P S T S T OP 1 2 3 1 Fig. 23 Fig. 24 LATCH PULL COVER TO OPEN MAINTENANCE AIR FILTER COVER FILTER CLEANING THE EXHAUST PORT AND SILENCER Depending on the type of fuel used, the type and amount of oil used, and/or your operating conditions, the exhaust port and silencer may become blocked with carbon deposits.
18 The fuel cap contains a non-serviceable filter and a check valve. A clogged fuel filter will cause poor engine perfor- mance. If performance improves when the fuel cap is loosened, the check valve may be faulty or the filter clogged. Replace fuel cap if required.
19 TROUBLESHOOTING PROBLEM PROBLEM PROBLEM PROBLEM PROBLEM POSSIBLE CAUSE POSSIBLE CAUSE POSSIBLE CAUSE POSSIBLE CAUSE POSSIBLE CAUSE SOLUTION SOLUTION SOLUTION SOLUTION SOLUTION IF THESE SOLUTIONS DO NOT SOL VE THE PROBLEM, CONT ACT YOUR AUTHORISED SERVICE DEALER.
20 1 TROUBLESHOOTING PROBLEM PROBLEM PROBLEM PROBLEM PROBLEM POSSIBLE CAUSE POSSIBLE CAUSE POSSIBLE CAUSE POSSIBLE CAUSE POSSIBLE CAUSE SOLUTION SOLUTION SOLUTION SOLUTION SOLUTION IF THESE SOLUTIONS DO NOT SOL VE THE PROBLEM, CONT ACT YOUR AUTHORISED SERVICE DEALER.
21 GUARANTEE – STATEMENT (RTSA / RTUK / RTG) All Homelite products are guaranteed from defects in material and workmanship for a period of twenty-four (24) months, effective and evidenced from date of original invoice or delivery note.
983000-208 2-03 OPERA T OR’S MANUAL T rimmer / Brushcutter F3040 UT70131 Ryobi T echnologies GmbH Itterpark 7 D-40724 Hilden Germany Tel.: +49 (0)2103 / 29 58 0 Fax : +49 (0)2103 / 29 58 29 info@ryobi-rtg.de Ryobi T echnologies Customer Services Anvil House T uns Lane Henley-on-Thames RG9 1SA UK Homelite / R.
Ein wichtiger Punkt beim Kauf des Geräts Homelite F3040 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Homelite F3040 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Homelite F3040 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Homelite F3040 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Homelite F3040 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Homelite F3040 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Homelite F3040 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Homelite F3040. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Homelite F3040 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
