Benutzeranleitung / Produktwartung DIGIMAX 350SE des Produzenten Harman-Kardon
Zur Seite of 120
Thank you for buying a Samsung Camera. This manual will guide you through using the Digimax 350SE, including taking images, downloading images and using MGI PhotoSuite III SE software.
SPECIAL FEA TURES Thank you for buying a Samsung Digital Camera. This digital camera has the following features. A high resolution of 3.2 mega pixels A 3 X optical and 2 X digital zoom lens Movie clip.
MANUF ACTURER’S CONTENTS Manufacturer's contents Please check that you have the correct contents before using this product. READY AC Adapter Digital camera CompactFlash TM card (CF CARD) 4 AA A.
THIS DIGIT AL CAMERA CAN BE USED FOR Editing images on a PC Recording images onto CD Printing images Vi ewing images on TV.
READY THIS DIGIT AL CAMERA CAN BE USED FOR Inserting images directly into any electronic document T aking a self-portrait and using the image to personalize name cards Y ou can even create your own unique gift-wrap paper by using your digital images.
CONTENTS Ready Getting to Know your camera 7 Safety note 8 Identification of features 10 Product Exterior 10 Viewfinder 12 LCD monitor indicator 14 LCD monitor menu indicator 16 Preparation 19 Connect.
GETTING T O KNOW YOUR CAMERA About the image mark Prior to using this camera, please read the user manual thoroughly. Keep the manual in a safe place. This manual contains instructions on using this camera that will help you to use this camera safely and correctly.
SAFETY NOTE W ARNING Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock or severe damage to you or your camera. Internal inspection, maintenance and repairs should be carried out by your dealer or Samsung Camera Service Center.
SAFETY NOTE READY NOTE Do not leave this camera in places subject to extremely high temperatures, such as a sealed vehicle, direct sunlight or other places of extreme variances in temperature. Exposure to extreme temperatures may adversely affect the camera’s internal components and could cause a fire.
IDENTIFICA TION OF FEA TURES Product Exterior (Front / T op / Bottom) Flash Shutter button (page 30) Microphone Mode dial (page 25) Strap eyelet Lens Self-timer lamp Viewfinder Flash fading control se.
IDENTIFICA TION OF FEA TURES Product Exterior (Back) READY LCD monitor Autofocus indicator (Green) lamp Viewfinder Flash indicator (Red) lamp 5-function button MENU button (page 31 / page 55) LCD butt.
IDENTIFICA TION OF FEA TURES Product Exterior (side) V iewfinder Close range picture area mark Picture area frame Optimum picture area over 1.5m Autofocus frame Optimum picture area within 0.
IDENTIFICA TION OF FEA TURES READY Reference Vertical and Horizontal shots are taken in the same way. Avoid obstructing the lens or the flash when you take a picture. Note As there can be some differences between what is seen through the Viewfinder and the resulting image when taken at a range closer than 1.
IDENTIFICA TION OF FEA TURES LCD monitor indicator The LCD monitor displays information about the shooting conditions. Shot mode Whenever you press the LCD button, the LCD monitor will change in the following order : Image & Status Image only LCD Off.
IDENTIFICA TION OF FEA TURES READY 9 Exposure compensation page 47 10 Zoom / Digital Zoom page 33 11 Number of available shots remaining 12 Image size / Continuous shot page 41/45 13 Image quality pag.
IDENTIFICA TION OF FEA TURES LCD monitor menu indicator Each mode has a menu as shown below. The default settings in each mode are printed below. SIZE : select image size(page 41) QUALITY : select ima.
IDENTIFICA TION OF FEA TURES READY EXPOSURE : select E.V. (page 47) ISO : select ISO (page 49) W.BALANCE : select White Balance (page 50) EFFECT : add effect to image (page 44) MOVIE CLIP mode MOVIE CLIP EXIT : MENU EXPOSURE ISO W.
IDENTIFICA TION OF FEA TURES Reference There is no associated menu in PC mode and the LCD monitor is always turned off in PC mode. FORMAT : format CF CARD (page 67) FILE NAME : input file name (page 6.
PREP ARA TION Connecting to Power READY There are two ways in which to provide the camera with power. You can use batteries(AA Alkaline or CR-V3), or alternatively, you can use an AC Adapter (DC 6V / 2.0A). Using the batteries 1 Open the battery chamber cover by pushing in the direction of the arrow.
PREP ARA TION Using the AC power adapter If you have access to a mains supply, using an AC Adapter allows the camera to be used for long periods of time. If you connect the camera to a computer, it is advisable to use an AC adapter, as this will enable extended use.
READY PREP ARA TION Inserting the CF CARD 1 Pull the card cover in the direction of the arrow to open. 2 Insert the card towards the arrow. The front side of the CF CARD (printed arrow) and the front side of the camera should face in the same direction when the card is inserted.
PREP ARA TION Reference Using a 16/ 32MB CF CARD, the specified shooting capacity will be as follows. (These figures are intended as an indication of expected performance) These figures are approximate as image capacities can be affected by variables such as card performance and subject matter.
READY PREP ARA TION Instructions on how to use the CF CARD Using a new CF CARD for the first time Before using the CF CARD, it must be initialized. Initializing prepares the CF CARD for recording data.
PREP ARA TION Selecting the date and time You can record the date and time with the image data in the CF CARD when you take an image. You will need to check and select the correct Date / Time when : The camera is used for the first time. The batteries have been removed for a period longer than 1 hour.
READY CAMERA WORKING MODE Camera working mode You can select the desired working mode by using the mode dial located on the top of the camera. This digital camera has 6 working modes. These are listed below STILL IMAGE mode ( ) This mode is used for macro shots between 0.
T AKING PHOT OS Now let's take a picture 1 To switch on the camera, press the POWER button ( ). Pressing the power button over 2 seconds changes the SOUND setting to OFF, though you have set the setting to ON. If you wish to hear the buzzer sound, set the setting to ON.
READY T AKING PHOT OS Note Select Macro shot mode when the subject is between 0.2m ~ 0.8m from the camera. Refer to page 32 for information on Macro shooting. If you take an image in dark place " LOW LUMINANCE" message will display on the LCD monitor.
T AKING PHOT OS Reference There are two LED lamps (one green, one red) positioned next to the viewfinder. If the camera is in focus when you press the shutter button halfway, the green LED will light up and you can take an image. If the red lamp lights up, the flash can fire.
SETTING UP SHOOTING FUNCTION Movie clip shot In a movie clip shot, sound and movie clip are recorded at the same time. When the mode dial is rotated to MOVIE CLIP mode, the LCD monitor will be displayed as shown below. Press the shutter button once and movie clips are recorded for as long as the available recording time allows.
POWER button - Used for turning the camera power on / off. - The camera power will be turned off automatically during periods of inactivity. This is done to reduce battery drain. The camera can be reactivated by pressing the power button again. SHUTTER button - Used for taking images in shot mode (Still image, Night scene, Movie clip).
ADV ANCED SETTING UP THE SHOOTING FUNCTION MENU button - When you press the MENU button, a menu related to each camera mode will be displayed on the LCD monitor.
SETTING UP THE SHOOTING FUNCTION Used for macro shots (0.2M ~ 0.8M). In dark conditions, the autofocus may not function. If this occours, press the FOCUS button and you can select fixed focus manually. 1. Turn the camera power on. 2. Rotate the mode dial to the shot mode (Still image, Night scene, Movie clip).
ADV ANCED SETTING UP THE SHOOTING FUNCTION ZOOM (W/T) button Used for digital or optical zooming in / out (Still image, Night scene, Movie clip). This camera has a 3X optical zoom and a 2 X digital zoom function. Using both will offer a total zoom ratio of 6 X.
SETTING UP THE SHOOTING FUNCTION Note Take care not to touch the lens during the zoom operation as this may cause damage. Take care not to touch the lens to avoid taking a dim image and camera malfunction. When the camera is turned on, take care not to touch the camera moving parts of lens as this may make the image be dim.
ADV ANCED SETTING UP THE SHOOTING FUNCTION OK button Used as a confirming data that is changed by using / / / buttons. FLASH / LEFT button When the menu is displayed on the LCD monitor, pressing the button makes the cursor shift to the left or to the main menu.
SETTING UP THE SHOOTING FUNCTION Flash mode indicator Reference Using the flash frequently will reduce the life of the batteries. Under normal operating conditions the charging time for the flash is normally within 7 seconds. If the batteries are weak, the charging time will be longer.
ADV ANCED SETTING UP THE SHOOTING FUNCTION SELF-TIMER / RIGHT button When the menu is displayed on the LCD monitor, pressing the button makes the cursor shift to the sub menu. When the menu is not displayed on the LCD monitor, the button operates as the SELF TIMER button.
SETTING UP THE SHOOTING FUNCTION MIC / UP button When the menu is displayed on the LCD monitor, pressing the button makes the cursor shift to up, or changes the sub menu. When the menu is not displayed on the LCD monitor, the button operates as the MIC (sound recording) button.
ADV ANCED SETTING UP THE SHOOTING FUNCTION METERING / Down button When the menu is displayed on the LCD monitor, pressing the button makes the cursor shift to down or changes the sub menu. When the menu is not displayed on the LCD monitor, the button operates as the METERING button.
SETTING UP THE SHOOTING FUNCTION Using the LCD monitor to adjust the camera Shooting functions can be changed by using the LCD monitor. In the shot mode, pressing the MENU button displays the menu on the LCD monitor. The following functions are available, depending on the mode you have selected (Still image, Night scene, Movie clip ).
ADV ANCED SETTING UP THE SHOOTING FUNCTION SIZE In STILL IMAGE and NIGHT SCENE mode, you can select the image size. A large image uses more memory, so increasing image size will reduce the total number of shots you can store on a CF CARD. The image sizes are listed below.
SETTING UP THE SHOOTING FUNCTION QUALITY In STILL IMAGE, NIGHT SCENE modes, you can select the image data compression rate. The higher the QUALITY setting, the better the final image will be. However, the high quality setting will require more memory and therefore reduce the number of images you can store on the CF CARD.
ADV ANCED SETTING UP THE SHOOTING FUNCTION SHARPNESS In the STILL IMAGE mode, you can select image sharpness. Select the desired SHARPNESS (SOFT/ NORMAL/ HARD) depending on the subject matter. 1. Turn the camera power on. 2. Rotate the mode dial to STILL IMAGE mode.
SETTING UP THE SHOOTING FUNCTION EFFECT Using the camera’s digital processor, it is possible to add special effects to your images. In STILL IMAGE or MOVIE CLIP mode, select the desired [EFFECT] sub menu. 1. Turn the camera on. 2. Rotate the mode dial to STILL IMAGE mode or MOVIE CLIP mode.
ADV ANCED SETTING UP THE SHOOTING FUNCTION SHOOTING This allows continuous shooting. In this mode, you can take moving subjects continuously. Once a continuous shooting sequence has been completed, the camera resets to single shooting mode. 1. Turn the camera on.
SETTING UP THE SHOOTING FUNCTION Selecting the number of continuous shots Select the desired number by pressing the UP ( ) / DOWN ( ) buttons. Press the OK button. 10. Press the MENU button to cancel menu display. CONTINUOUS SHOT CANCEL : SET : OK 002 # OF SHOTS Reference When [CONTINUOUS] is selected, the flash will automatically be cancelled.
ADV ANCED SETTING UP THE SHOOTING FUNCTION EXPOSURE This camera automatically adjusts the exposure according to the ambient lighting conditions. However, you can select the exposure value by using [EXPOSURE] sub menu. This function can be used in STILL IMAGE and MOVIE CLIP mode.
SETTING UP THE SHOOTING FUNCTION 7. Select the desired sub menu by pressing the UP ( ) / DOWN ( ) buttons. The camera calculates the exposure value automatically. The default setting is 0.0 EV. 8. After selecting the desired sub menu, press the OK button to confirm the setting.
ADV ANCED SETTING UP THE SHOOTING FUNCTION ISO You can select the camera’s sensitivity to light by selecting the ISO sub menu. Raising the ISO sensitivity will mean that the camera needs less light in order to take an image. However, the higher the ISO value is, the grainier the image will be.
SETTING UP THE SHOOTING FUNCTION W.BALANCE Different lighting conditions may cause a color cast on your images. The white balance control allows you to adjust the colors to appear more natural looking. The setting remains until the power is turned off.
ADV ANCED SETTING UP THE SHOOTING FUNCTION SCENE In NIGHT SCENE mode, Select the desired SCENE mode. - [PORTRAIT] mode ( ) : This is used for both portrait and landscape shots. - [LANDSCAPE] mode ( ) : This is used for landscape shots. 1. Turn the camera on.
SETTING UP PLA Y BACK FUNCTIONS Starting Play Mode - Turn the camera on and select ( ) on the mode dial. The camera can now play back the images stored on the CF CARD. Sound can also be added to images in this mode. - You can setup the PLAY mode function by using the camera buttons and LCD monitor.
ADV ANCED SETTING UP PLA Y BACK FUNCTIONS Setting up play back function by using the camera button THUMBNAIL / ZOOM W button You can view up to 9 images at a time by using the THUMBNAIL function. 1. Turn the camera on. 2. Rotate the mode dial to PLAY mode.
SETTING UP PLA Y BACK FUNCTIONS ZOOM W / ZOOM T button When viewing a single image in PLAY mode, use the zoom T button to enlarge the selected image. 1. Turn the camera on. 2. Rotate the mode dial to PLAY mode. 3. Select the desired image. 4. Enlarge the image up to the desired scale of enlargement by using the ZOOM T button.
ADV ANCED SETTING UP PLA Y BACK FUNCTIONS LCD button Pressing the LCD button will change the display as follows. You can view image information(Shutter speed, Aperture value, ISO sensitivity) in <Image with additional information> mode (e.g.) SIZE : 2048X1360 ISO : 100 TV : 1/250 SEC Shutter speed AV : F2.
SETTING UP PLA Y BACK FUNCTIONS DELETE button This deletes image stored on the CF CARD. 1. Turn the camera power on. 2. Rotate the mode dial to PLAY mode. 3. Press the LEFT ( ) / RIGHT ( ) buttons to select image that you wish to delete. 4. When you press the DELETE button, a message will be displayed on the LCD monitor.
ADV ANCED SETTING UP PLA Y BACK FUNCTIONS MIC / UP button When the LCD monitor is turned on, pressing the button will either cause the cursor to move up or change a selected sub menu. When the LCD monitor is not turned on, pressing the button will allow a sound recording to be added to a stored still image.
SETTING UP PLA Y BACK FUNCTIONS 1. Turn the camera power on. 2. Rotate the mode dial to PLAY mode( ). 3. Press the LEFT ( ) / RIGHT ( ) buttons to select a sound recorded still image or a movie clip. Or, select slide show. 4. Press PLAY & PAUSE button.
ADV ANCED SETTING UP PLA Y BACK FUNCTIONS Setting up play back function using the LCD monitor SLIDE SHOW Images can be displayed continuously at pre-set intervals. 1. Turn the camera power on. 2. Rotate the mode dial to PLAY mode( ). 3. Press the MENU button to display the menu on the LCD monitor.
SETTING UP PLA Y BACK FUNCTIONS PROTECT This is used to protect specific shots from accidental erasing (LOCK). It also releases images that have been previously protected (UNLOCK). 1. Turn the camera on. 2. Rotate the mode dial to PLAY mode( ). 3. Press the MENU button to display the menu on the LCD monitor.
ADV ANCED SETTING UP PLA Y BACK FUNCTIONS 6. Select the desired sub menu by pressing the UP ( ) / DOWN ( ) buttons. - ONE IMAGE : This protects a single image. - ALL IMAGES : This protects all the images on the CF CARD. 7. Press the OK button and the PROTECT setting display will show on the LCD monitor.
SETTING UP PLA Y BACK FUNCTIONS DELETE ALL This enables you to clear all unprotected images from the CF CARD. Remember that this will permanently delete unprotected images. Important shots should be stored on a computer before deletion takes place. 1.
ADV ANCED SETTING UP PLA Y BACK FUNCTIONS FORMAT This is used to format the CF CARD. all images INCLUDING protected images will be deleted. 1. Turn the camera on. 2. Rotate the mode dial to PLAY mode( ). 3. Press the MENU button to display the menu on the LCD monitor.
SETTING UP PLA Y BACK FUNCTIONS DPOF (Digital Print Order Format) DPOF stores printing information onto the CF CARD, enabling you to have images printed directly from the CF CARD. Images can then be printed on DPOF printers, or at an increasing number of photo laboratories.
ADV ANCED SETTING UP PLA Y BACK FUNCTIONS INDEX This function will specify the number of copies (except for movie clips) for index print. The maximum number of images for index print are 500. 1. Turn the camera on. 2. Rotate the mode dial to PLAY mode( ).
SETTING UP PLA Y BACK FUNCTIONS REVIEW You can review specified number of STANDARD or INDEX copies. 1. Turn the camera on. 2. Rotate the mode dial to PLAY mode ( ). 3. Press the MENU button to display [PLAY 1/2] menu on the LCD monitor. 4. Select [PLAY (DPOF) 2/2] menu by pressing the LEFT ( ) / RIGHT ( ) buttons.
ADV ANCED SETTING UP THE CAMERA SYSTEM Starting Set up mode FILE NAME This enables you to name files - SERIES type : Under this system, the file name will directly follow the last stored file name, regardless of any actions such as file deletion or re-formatting.
SETTING UP THE CAMERA SYSTEM 1. Turn the camera on. 2. Rotate the mode dial to SET UP mode ( ). 3. A menu will display on the LCD monitor. 4. Press the DOWN button ( ) and select [FILE NAME]. 5. Shift the cursor to the [FILE NAME] sub menu by pressing the RIGHT button ( ).
ADV ANCED SETTING UP THE CAMERA SYSTEM LANGUAGE There is a choice of languages that can be displayed on the LCD monitor. ENGLISH, GERMAN,FRENCH,SPANISH,CHINESE and KOREAN are available. 1. Turn the camera on. 2. Rotate the mode dial to SET UP mode ( ).
SETTING UP CAMERA SYSTEM DATE SETUP This alters the time and date stored with the images. Range: 2001 ~ 2050 year (leap years and months are corrected automatically). The default is 2002/03/01 00:00. 1. Turn the camera on. 2. Rotate the mode dial to SET UP mode( ).
ADV ANCED SETTING UP CAMERA SYSTEM IMPRINT There is an option to include DATE/TIME on still images. There are 3 types of IMPRINT. - OFF: IMPRINT function is cancelled. - DATE: The date is included in the still image. - DATE & TIME: The date and time is included in the still image.
SETTING UP CAMERA SYSTEM DATE TYPE You can select date type that is imprinted on the image. - YYYY/MM/DD : year /month/ day - DD/MM/YYYY : day /month /year - MM/DD/YYYY : month/ day /year 1. Turn the camera on. 2. Rotate the mode dial to SET UP mode ( ).
ADV ANCED SETTING UP CAMERA SYSTEM USER SET User can save the sub menu, that is returned to default when the camera power is off, as user preferences. Only marked sub menu in the [TABLE 1] can be applied to USER SET function. 1. Turn the camera on. 2.
SETTING UP CAMERA SYSTEM < TABLE 1 > List of menu and sub menu - Remarks : Default x : There is no associated menu : The setting is maintained even if the camera power is off. : The setting is returned to default, once the camera power has been switched off.
ADV ANCED SETTING UP CAMERA SYSTEM ON xxx OFF xxx C.W.A xxx Center xxx Auto xxx WHITE Daylight xxxx BALANCE Fluorescent xxxx Tungsten xxxx Portrait x x xxx Landscape x x xxx xxx xx One Image x x x xx .
SETTING UP CAMERA SYSTEM LCD You may adjust the LCD brightness. 1. Turn the camera on. 2. Rotate the mode dial to SET UP mode( ). 3. [SETUP 1/3] menu will display on the LCD monitor. 4. Select [SETUP 3/3] menu by pressing the LEFT ( ) / RIGHT ( ) buttons.
ADV ANCED SETTING UP CAMERA SYSTEM VIDEO OUT The Video output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of machine (monitor or TV, etc.) to which the camera is connected. Select the correct video standard for the outer monitor.
CONNECTING T O AN EXTERNAL MONIT OR Connecting to an external monitor In STILL IMAGE or PLAY mode, you can view the stored images or movie clips by connecting the camera to an external monitor via the video cable. When the camera is connected to an external monitor, the LCD monitor will be turned off automatically.
ADV ANCED PC MODE Functions of PC mode Note The USB Storage Driver must be installed before using PC mode. Refer to page 90 regarding installation. To save battery power, it is recommended that you us.
IMPORT ANT NOTES Caution! Your new Samsung camera is a precision instrument. Whilst it is designed to withstand general wear and tear, there are some important points that will help you get maximum service and reliability from your camera. The following should be avoided : Severe changes in temperature and humidity.
ADV ANCED IMPORT ANT NOTE If the digital camera is not used for a long period, an electric discharge can occur. It is a good idea to remove the batteries and CF CARD if the camera is not used for some time. If the camera is exposed to electronic interferance, it will turn itself off to protect the CF CARD.
IMPORT ANT NOTE W arning indicator There are several warnings that may appear in the LCD display : Warning message NO CARD ! NO IMAGE ! CARD FULL ! CARD FAIL ! LOW BATTERY ! Reason for message No CF CARD. The camera cannot recognize the CF CARD. There are no images stored on the CF CARD.
BEFORE CONT ACTING SER VICE CENTER Please check the following ADV ANCED Symptom The camera will not switch on. The camera powers down whilst in use. The batteries are exhausted. Camera is turned off automatically due to the Auto power function. Adapter plug is not connected securely.
BEFORE CONT ACTING SER VICE CENTER Please check the following Symptom The images are unclear. The flash does not fire. Incorrect date and time is displayed. The camera buttons do not operate. Cause The focus mode is not correct. FLASH OFF mode have been selected.
ADV ANCED BEFORE CONT ACTING SER VICE CENTER Symptom Images are not very clear. DATE/TIME is not displayed on the image. No image on external monitor Cause The lens or LCD monitor is smudged or dirty. Images taken without date imprinting setting. The external monitor has not been connected properly with the camera.
SPECIFICA TIONS 1/1.8” CCD Approx. 3.2 Mega pixels Approx. 3.3 Mega pixels f = 7.0 ~ 21.0mm (35mm film equivalent : 34 ~ 102mm) F2.6 ~ F4.7 Still Image mode : 1.5X, 2X Play mode : Small 1.5X, Medium 1.5X ~ 3X (0.5X steps), Large & Photo 1.5X ~ 5X (0.
ADV ANCED SPECIFICA TIONS Large : Super fine 9/19, Fine 19/39, Normal 29/59 Photo : Super fine 10/22, Fine 22/45, Normal 32/66 Medium : Super fine 38/77, Fine 75/153, Normal 110/225 Small : Super fine.
About softwares USB Storage Driver This camera uses USB Storage Driver as the camera driver. You can use the camera as a USB card reader. After installing the driver and connecting this camera to the PC, you can find [Removeable Disk] in [Windows Explorer] or [My computer].
SOFTW ARE HOW T O SET UP THE SOFTW ARE FOR WINDOWS How to set up the software Inserting the CD-ROM provided with this camera into the CD-ROM drive, the following frame is automatically run. 1.Driver : This enables image to transfer between the camera and PC.
HOW T O SET UP THE SOFTW ARES FOR WINDOWS Setting up USB driver for Windows 1 Click [ Storage Driver] menu on the Autorun frame and the ‘InstallShield Wizard’ Window will open. Click [ Next > ]. 2 [ Storage Driver ] installation has started. 3 Installation is complete.
SOFTW ARE HOW T O SET UP THE SOFTW ARES FOR WINDOWS Setting up USB driver for Windows 4 After restarting computer, connect the PC to the camera with the USB cable. 5 Turn the camera power on with the mode dial set on PC. [Found New Hardware Wizard] will appear and the computer will recognize the camera.
HOW T O SET UP THE SOFTW ARES FOR WINDOWS Setting up Digimax V iewer This software is only compatible with Windows. 1 Click [Digimax Viewer] on the Autorun frame . 2 Installation window will display as shown alongside. Click [Next]. 3 The Software License Agreement window will display.
SOFTW ARE HOW T O SET UP THE SOFTW ARES FOR WINDOWS Setting up Digimax V iewer 5 Select Program folder and click [Next]. 6 Setup status window will display. 7 Installation is completed. If you wish to open this program automatically whenever the camera connects to PC, click [I would like to launch Digimax Viewer] Checkbox.
HOW T O SET UP THE SOFTW ARES FOR WINDOWS Setting up the MGI PhotoSuite lll SE 2 Select language. 3 A Welcome window will be displayed. Click [Next >] to move to the next step. 4 The Software License Agreement window will be displayed. If you agree to this, click [Yes], the window will then move to the next step.
SOFTW ARE HOW T O SET UP THE SOFTW ARES FOR WINDOWS 5 Select setup type. Full : the program will be installed with all the options. Custom : you can choose what you would like to install. 6 Start Copying Files window will display. Click [Next > ] to start installation.
HOW T O SET UP THE SOFTW ARES FOR WINDOWS 8 Installation is completed. If installation is completed correctly, Autoplay is registered automatically into the start menu program as shown alongside.
SOFTW ARE CONNECTING THE CAMERA FOR WINDOWS Connecting USB cable to the Camera for Windows To download images, you will need Windows 98 or later and a USB port on your computer. 1 Connect the USB cable to the USB port on the computer. 2 Connect the other end of the USB cable to the USB connection terminal of the camera.
REMOV ABLE DISK Note Important information whilst using the Removable Disk The [Removable Disk] indicator will not show when the camera power is off. We recommend that you should copy the images to the PC to view them. Opening images directly from the removable disk may be subject to unexpected disconnection.
SOFTW ARE REMOV ABLE DISK Reference When a downloaded movie won't play back, follow the procedure below. [ Solution 1 ] Install JPEG_Decoder. 1. Insert Application CD in CD-ROM Drive. 2. Open [Windows Explorer] and double click JPEG_Decorder folder in CD-ROM Driver folder.
HOW T O USE THE SOFTW ARES Digimax V iewer This software is only compatible with Windows. To open Digimax Viewer, click the [ Start Programs Samsung Digimax Viewer 1.0 Digimax Viewer 1.0 ] and Digimax Viewer 1.0 will then open. The stored images will display as thumbnail image.
SOFTW ARE HOW T O USE THE SOFTW ARES MGI PhotoSuite SE This software is only compatible with Windows. To open MGI PhotoSuite lll SE, click the [Start Programs MGI PhotoSuite lll SE MGI PhotoSuite lll SE] and MGI PhotoSuite lll SE will then open.
HOW T O USE THE SOFTW ARES MGI PhotoSuite SE An introduction to the Welcome screen Get Get images. Prepare A number of photo editing activities can be performed within this module. Compose Use your photos in a variety of fun, creative and interesting ways.
SOFTW ARE HOW T O USE THE SOFTW ARES Introduciton to navigation bar Back Return to the previous step. Home Return to Welcome screen. Help Display help window. Get Get images. Prepare A number of photo editing activities can be performed within this module.
HOW T O USE THE SOFTW ARES MGI PhotoSuite lll SE GET To obtain images from the computer 1 To acquire images,Click the large [Get] button on the Welcome screen, or the [Get] button on the Navigation bar. Click [Computer] from the list of options displayed on the activity panel.
SOFTW ARE HOW T O USE THE SOFTW ARES MGI PhotoSuite lll SE When you obtain images from the digital camera. 1 To acquire images, click the large [Get] button on the Welcome screen, or the [Get] button on the Navigation bar. Click [Computer] from the list of options displayed on the activity panel.
HOW T O USE THE SOFTW ARES MGI PhotoSuite lll SE 3 Select [ Dcim -> 100sscam ] folder. Then select image and click [ Open ]. 4 The Welcome screen will change to the next work step, with the selected image displayed. Reference When you use the Digimax camera, only [Computer] and [Album] from the list of options displayed are available.
SOFTW ARE HOW T O USE THE SOFTW ARES MGI PhotoSuite lll SE 1 To acquire images, click the the large [Get] button on the Welcome screen, or the [Get] button on the Navigation bar. Click [Album] from the list of options displayed on the activity panel. 2 After selecting Album on the Choose a photo album, click an image in the album and click [Open].
HOW T O USE THE SOFTW ARES MGI PhotoSuite lll SE PREP ARE When the image is loaded, the step changes to Prepare automatically. Menu of [PREPARE] step Rotate & Crop You can rotate, flip or crop images along with a host of others. Touchup Remove Red eye, Remove Scratches etc.
SOFTW ARE HOW T O USE THE SOFTW ARES MGI PhotoSuite lll SE COMPOSE Add Text , Compound Images etc.. are available in this step. Menu of [COMPOSE] steps Collages : A collage consists of several photos or sections of photos arranged together on a common background.
HOW T O USE THE SOFTW ARES MGI PhotoSuite lll SE ORGANIZE Organize your photos and other media files into albums. Menu of [ORGANIZE] step Choose a photo album to view or edit Select Album : To create an Album, click [Organize] in the welcome screen or navigation bar.
SOFTW ARE HOW T O USE THE SOFTW ARES MGI PhotoSuite lll SE Creating an Album 1 To create an Album, click the large Organize button on the Welcome screen, or the Organize button on the Navigation bar. 2 Click [Album..] in Choose a photo album to view or edit.
HOW T O USE THE SOFTW ARES MGI PhotoSuite lll SE SHARE Saving images 1 Saving or sharing images. Menu of [SHARE] step Save To save the active file according to its current name and path. Save As To assign a new name or path to the file. Send E-mail e-mailing images.
SOFTW ARE HOW T O USE THE SOFTW ARES MGI PhotoSuite lll SE Reference For more information, please refer to the Help file in [Help MGI PhotoSuite lll help].
REMOVING THE USB DRIVER FOR WINDOWS Removing USB Driver for Windows 1 Click [Add/Remove programs] in Controller. 2 After selecting [Samsung Digimax 350SE Camera], click [Add/Remove] and the following window will display. 3 Click [OK] and USB driver will be removed automatically.
SOFTW ARE REMOVING THE USB DRIVER FOR WINDOWS Reference If you are a Windows 2000/ME/XP user, follow the procedure below to remove the USB Driver. 1. Connect the PC to the camera (PC mode, power on) 2. As mentioned above, remove [ Samsung Digimax 350SE Camera ] in [ Add/Remove programs ] 3.
CONNECTING THE CAMERA FOR MAC Connecting USB cable to camera for macintosh The USB port has to be in the Macintosh or keyboard. 1 Connect the USB cable to the USB port on the Macintosh. 2 Connect the other end of the USB cable to the USB port of the camera 3 Set the mode dial ( ).
SOFTW ARE HOW T O INST ALL AND USE THE USB DRIVER FOR MAC Setting up USB Driver for MAC 1 USB Driver for MAC is not included with the Application CD as MAC OS support the camera driver. 2 Check MAC OS This camera is available in MAC OS 9.X or later. 3 Connect the camera to the Macintosh and turn the camera power on in PC mode.
FA Q About USB Please check the following if the USB connection malfunctions. [Case 1] The camera power is off. Turn the camera power on. We recommend using an AC power adapter in PC mode. If you use batteries, check the battery condition. [Case 2] The mode dial is not set to PC mode.
FA Q About USB [Case 7] There is an unexpected error during file transfer. Turn the camera power off and on again. Then transfer the file again. [Case 8] How do I know my computer supports USB Interface? Check the USB port in your computer or keyboard.
SAMSUNG TECHWIN CO., LTD. OPTICS & DIGITAL IMAGING DIVISION 145-3, SANGDAEWON 1-DONG, JUNGWON- GU,SUNGNAM-CITY, KYUNGKI-DO, KOREA 462-121 TEL : (82) 31-740-8086,8088, 8090, 8092, 8099 FAX : (82) 31-740-8398, 8399 SAMSUNG OPTO-ELECTRONICS AMERICA, INC.
Ein wichtiger Punkt beim Kauf des Geräts Harman-Kardon DIGIMAX 350SE (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Harman-Kardon DIGIMAX 350SE noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Harman-Kardon DIGIMAX 350SE - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Harman-Kardon DIGIMAX 350SE reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Harman-Kardon DIGIMAX 350SE erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Harman-Kardon DIGIMAX 350SE besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Harman-Kardon DIGIMAX 350SE verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Harman-Kardon DIGIMAX 350SE. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Harman-Kardon DIGIMAX 350SE gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
