Benutzeranleitung / Produktwartung BULE BEE 91959 des Produzenten Harbor Freight Tools
Zur Seite of 14
RO T AR Y CUL TIV A T OR WITH 5.5 HP BRIGGS & STRA TT ON ® ENGINE Model 91959 ASSEMBL Y AND OPERA TING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo , CA 93011 Visit our W eb site at: http://www .harborfreight.com TO PREVENT SERIOUS INJUR Y , READ AND UNDERST AND ALL W ARNINGS AND INSTR UCTIONS BEFORE USE.
PR ODUCT SPECIFICA TIONS SA VE THIS MANU AL Y ou will need this manual f or the saf ety w ar nings and precautions, assemb ly , operating, inspection, maintenance and cleaning procedures, par ts list and assembly diagram. K eep y our in voice with this man ual.
3. K eep bystander s, children, and visitors a way while operating a po wer tool. Distractions can cause you to lose control. Protect others in the wor k area from debris such as chips and spar ks. Provide barriers or shields as needed. PERSONAL SAFETY 1.
2. Do not use the power tool if the Engine’ s Thr ottle Control (71) does not turn it on or off. Any gasoline powered tool that cannot be controlled with the Engine’ s Throttle Control is dangerous and must be replaced.
SKU 91959 For technical questions please call 1-800-444-3353 P A GE 5 3. Alwa ys use recommended replacement par ts. The recommended replace- ment par ts are availab le from Harbor F reight T ools.
2. K eep the Cultivator and surr ounding area c lean of flammable objects at all times. 3. When spills of fuel or oil occur , they m ust be c leaned up immediately . Dis- pose of fluids and cleaning materials as per any local, state, or f ederal codes and regulations.
properly and perfor m its intended function. Chec k f or alignment and binding of moving parts, any brok en par ts or mounting fixtures, and any other condition that ma y aff ect proper operation. Any par t that is damaged should be proper ly re- paired or replaced by a qualified technician.
SKU 91959 For technical questions please call 1-800-444-3353 P A GE 8 CALIFORNIA PR OPOSITION 65 W ARNINGS 1. W ARNING! Operation of this Cultiv ator and/or Engine e xhaust from this product contains chemicals known to the State of Calif ornia to cause cancer , bir th defects, or other reproductiv e har m.
Pre-Star t Chec ks: 1. IMPOR T ANT ! Prior to first using the Cultiv ator , the Engine MUST be filled with a high quality SAE 10W -30 grade engine oil until the le vel of the oil is indicated as “FULL ” on the Oil Dipstick. T o do so , unscre w and remo ve the Oil Dipstick located on the Engine Cr ankcase .
SKU 91959 For technical questions please call 1-800-444-3353 P A GE 10 (to a maximum 11” deep). T o do so , remo v e the two Cotter Pins (39). Remov e the two Pin Shafts (38). Raise or lower the Depth Skid (57) to obtain the desired tilling depth. Then, replace the Pin Shafts and Cotter Pins.
SKU 91959 For technical questions please call 1-800-444-3353 P A GE 11 T o Stop The Cultiv ator: 1. Release your g rip on the Clutch Handle (73), and allow it to return to its “NEU- TRAL ” position. (See Figure D.) 2. T ur n the Throttle Control (71) to its “ST OP” position.
SKU 91959 For technical questions please call 1-800-444-3353 P A GE 12 PLEASE READ THE FOLLO WING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIB UT OR HAS PR O VIDED THE P AR TS LIST AND ASSEMBL Y DIA GRAM IN THIS MANU AL AS A REFERENCE T OOL ONL Y .
P AR TS LIST SKU 91959 For technical questions please call 1-800-444-3353 P A GE 13 NO TE: Some par ts are listed and shown f or illustration purposes only , and are not av ailable individuall y as replacement parts. Part # Description Qty. Part # Description Qt y .
ASSEMBL Y DIA GRAM SKU 91959 For technical questions please call 1-800-444-3353 P A GE 14 38 39 27 26 16A1 16A2 NO TE: Some parts are listed and shown for illustration purposes only , and are not availab le idividually as replacement parts.
Ein wichtiger Punkt beim Kauf des Geräts Harbor Freight Tools BULE BEE 91959 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Harbor Freight Tools BULE BEE 91959 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Harbor Freight Tools BULE BEE 91959 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Harbor Freight Tools BULE BEE 91959 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Harbor Freight Tools BULE BEE 91959 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Harbor Freight Tools BULE BEE 91959 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Harbor Freight Tools BULE BEE 91959 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Harbor Freight Tools BULE BEE 91959. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Harbor Freight Tools BULE BEE 91959 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.