Benutzeranleitung / Produktwartung 98870 des Produzenten Harbor Freight Tools
Zur Seite of 17
ARC WELDER - 120 Model 98870 SET UP AND OPERA TING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally . Due to continuing improvements, actual product may differ slightly from the product described herein. Distributed exclusively by Harbor Freight T ools ® .
Page 2- SKU: 98870 SPECIFICA TIONS Input Power 1 15/230 V~ , 42 A Maximum Amperage Output 120 A Electrode Sizes (Note: Electrodes not included) 1/16” to 5/64” (1 15V) 1/16” to 3/32” (230V) Features This is a high-quality hobby arc welder , delivering up to 140 Amps welding current.
Page 3- SKU: 98870 Use eye and ear protection . Wear ANSI-approved impact safety goggles at all times. Wear a full face shield if you are producing metal lings or wood chips. W ear an ANSI approved dust mask or respirator when working around metal, wood, and chemical dusts and mists.
Page 4- SKU: 98870 Safety W arnings and Precautions for Arc W elding W ARNING! Arc W elding Can be Hazardous. It is your responsibility to operate this equipment in a safe manner . Fire or Explosion Precautions Arc welding creates heat and sparks. These can cause re or explosion.
Page 5- SKU: 98870 Personal Safety Precautions Flying Sparks can cause injury , and Hot Materials can cause burns. Please wear appropri - ate safety clothing, and observe precautions to prevent burns or injury to yourself or others. Wear ANSI approved safety goggles or glasses when using this equipment.
Page 6- SKU: 98870 ARC WELDER ASSEMBL Y Installing the Handle Locate the HANDLE (27) and SCREW (28). Slide the HANDLE (27) onto the top of the CASE (26), indexing the tabs on the underside of the HANDLE onto the slots on top of the CASE, as indicated by lines (A) in Figure 1.
Page 7- SKU: 98870 Installing the Electrode Handle Figure 3. Installing the Electrode Handle Locate the ELECTRODE CABLE (5), as shown in the parts diagram, and the Elec- trode Handle as shown in gure 3, Step 1 above. Slide the Handle Grip off the Electrode Handle, as shown in Step 2 above.
Page 8- SKU: 98870 Installing the Power Plug Note: This Arc Welder is equipped to operate with either 1 15 or 230 V olt power supply . Standard “household” current in the U.S. is 1 10-120 V olts. If you will be using a “household” outlet, follow directions for 1 15 V olt wiring.
Page 9- SKU: 98870 Wiring Diagram 1 15/230 V~ 1 15 V~: B - M 230 V~: M - N B=White N=Red M=Black.
Page 10- SKU: 98870 Preparing a Safe W orkplace Environment to A void Hazardous Conditions The primary hazards to be managed when using Arc Welding equipment include Electric Shock, Fumes and Gasses, Sparks and Fire, Arc Light, and T ools and Equipment in the Work Area.
Page 1 1- SKU: 98870 General Workplace Cautions Prepare and maintain a safe, uncluttered workplace. Make sure the welding ground circuit is direct to the work. Be wary of hoist chains, cables, scaffolding, etc. Avoid contacting other electrical equipment in the area, such as hoists, grinders, etc.
Page 12- SKU: 98870 CONTROLS POWER SWITCH (1). Use this selec- tor to turn the welder Off, or On to the correct V oltage. WARNING: It is imperative that you select ONL Y the V oltage setting for which you have wired the Power Cable. POWER CABLE (2). Y ou will have wired this for either 1 15 or 230 V olts.
Page 13- SKU: 98870 important information, you are strongly urged to obtain appropriate training, and to practice on non-critical test pieces before attempting to weld important items.
Page 14- SKU: 98870 T roubleshooting Arc W elding Defects Porosity and Surface Holes Most porosity cannot be seen, but serious porosity weakens the weld. Before welding, remove all surface contaminants, such as Mill Scale, Rust, Paint, Dirt, Grease, or Moisture.
Page 15- SKU: 98870 Parts List Part Code Q’ty Description 1 ZH-HC-3 1 SWITCH 1 15/230V 2 BA.B12.6 1 POWER CABLE 3 BA.B12.4 1 AMPERAGE CONTROL KNOB 4 BA.B12.7 1 GROUND CABLE 5 BA.B12.7 1 ELECTRODE CABLE 6 ND10 T90 1 GREEN PILOT LAMP 7 ND10 T90 1 YELLOW LAMP 8 GB818 3 SCREW M4 X 12 9 1 WELDING STEP SELECT OR 10 GB818 1 SCREW M 3 x 10 1 1 BA.
Page 16- SKU: 98870 Assembly Diagram 29.
Page 17- SKU: 98870 LIMITED 1 YEAR / 90 DA Y W ARRANTY Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original.
Ein wichtiger Punkt beim Kauf des Geräts Harbor Freight Tools 98870 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Harbor Freight Tools 98870 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Harbor Freight Tools 98870 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Harbor Freight Tools 98870 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Harbor Freight Tools 98870 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Harbor Freight Tools 98870 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Harbor Freight Tools 98870 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Harbor Freight Tools 98870. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Harbor Freight Tools 98870 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.