Benutzeranleitung / Produktwartung 95346 des Produzenten Harbor Freight Tools
Zur Seite of 19
GASOLINE AUGER DRILL 1.5 HP Model 95346 ASSEMBL Y AND OPERA TION INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. CAUTION! Y our W arranty Is V oided If: Y ou do not operate the Auger Drill with the proper 25:1 unleaded fuel/2-cycle oil mix in its fuel tank.
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 2 REV 07b, 07e SPECIFICA TIONS Engine Specications 1.5 HP / 52cc / Single Cylinder / 2-Stroke / Recoil Start Fuel Required 25:1 Unleaded Gasoline (89 octane or better) & 2 Cycle Oil Mixture Fuel T ank Capacity 0.
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 3 GENERAL SAFETY RULES AND PRECAUTIONS W ARNING! READ AND UNDERST AND ALL INSTRUCTIONS Failure to follow all instructions listed below may result in electric shock, re, and/or serious injury .
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 4 Do not use the Auger Drill if the Kill Switch does not turn it off. 2. Any tool that cannot be controlled with its Kill Switch is dangerous and must be replaced. Store idle tools out of reach of children and other untrained persons.
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 5 Do not leave the Auger Drill unattended when it is running. 4. T urn off the Engine before leaving. Do not allow children and other unauthorized people to handle or play with 5. the Auger Drill.
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 6 When spills of fuel or oil occur , they must be cleaned up immediately . 3. Dis- pose of uids and cleaning materials as per any local, state, or federal codes and regulations. Store oil rags in a covered metal container .
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 7 UNP ACKING When unpacking, check to make sure all the parts shown on the Parts Lists on pages 14, 16, and 18 are included. If any parts are missing or broken, please call Harbor Freight T ools at the number shown on the cover of this manual as soon as possible.
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 8 PRE-ST ART INSTRUCTIONS Fill the Fuel T ank IMPORT ANT! 1. Y our warranty is voided if you do not operate the Auger Drill with the proper 25:1 fuel mix in its Fuel T ank (89). Do not run the Engine with an improper fuel mix, low or no fuel mix.
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 9 OPERA TION Starting and Stopping 1. W ARNING! Always wear safety equipment. When operating the Auger Drill, wear ANSI-approved safety impact eye goggles, hearing protection, heavy duty work gloves, sturdy work boots, and head protection.
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 10 6. W ARNING! The Auger (33a) should do not turn at idle. If it is turning at idle, turn the Idle Screw of the Carburetor (shown r.
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 1 1 Drilling a Hole Stand with a solid stance on stable 1. gro und . B rac e your sel f and mai nta in a proper grip with both hands on the Frame (1b) whenever the Engine is running. (See Figure E.
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 12 INSPECTION, MAINTENANCE, AND CLEANING 1. W ARNING! Re mo ve the Spa rk Plu g (51 ) an d al low the eng in e to co ol com pl et ely prior to performing any service, maintenance, or cleaning of the Auger Drill.
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 13 TROUBLESHOOTING Problem Possible Cause Possible Solution Engine will not start. Low or no fuel in fuel tank or 1. improper fuel/2-cycle oil mix. Not enough fuel getting to 2. carburetor .
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 14 P ARTS LIST - ENGINE Part Description Qty . 1 Set Screw (M5 x 12) 1 2 Gasket 1 3 Reel 1 4 Starter Rope 1 5 Spiral Spring 1 6 Rewind Starter Assy .
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 15 ASSEMBL Y DIAGRAM - ENGINE.
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 16 P ARTS LIST - GEARBOX UNIT REV 07b Part Description Qty . 1a Starting Flange 1 2a Oil Seal (20 x 52 x 7) 1 3a W asher 1 4a W ashe.
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 17 P ARTS LIST & ASSEMBL Y DIAGRAM - FRAME Part Description Qty . 1b Frame (Complete) 1 2b Handle 1 3b T ie Strip 3 4b Handle 1 5b Kill Switch 1 Part Description Qty .
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 18 Emission Control System W arranty United States Emission Control Defects W arranty Statement The United States Environmental Prot.
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 19 5. Service and Maintenance Component parts which are not scheduled for replacement as required maintenance or are scheduled only for regular inspection to the effect of “repair or replace as necessary” are warranted for the warranty period.
Ein wichtiger Punkt beim Kauf des Geräts Harbor Freight Tools 95346 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Harbor Freight Tools 95346 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Harbor Freight Tools 95346 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Harbor Freight Tools 95346 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Harbor Freight Tools 95346 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Harbor Freight Tools 95346 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Harbor Freight Tools 95346 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Harbor Freight Tools 95346. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Harbor Freight Tools 95346 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.