Benutzeranleitung / Produktwartung 47612 des Produzenten Harbor Freight Tools
Zur Seite of 12
15 GAUGE AIR ANGLE NAILER 47612 SET UP AND OPERA TING INSTRUCTIONS Distributed exclusively by Harbor Freight T ools ® . 3491 Mission Oaks Blvd., Camarillo, CA 9301 1 Visit our website at: http://www .harborfreight.com Read and understand tool labels and manual.
Page 2 SKU 47612 For technical questions, please call 1-800-444-3353. Specications Air Inlet 1/4” NPT Recommended Air Pressure 70 – 120 PSI * Nail Size Capacity 1-1/4” to 2-1/2” Long Nails .
Page 3 SKU 47612 For technical questions, please call 1-800-444-3353. Use the right tool for the job. 5. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applications for which this tool was designed.
Page 4 SKU 47612 For technical questions, please call 1-800-444-3353. tion. Any part that is damaged should be properly repaired or replaced by a quali- ed technician. Do not use the tool if the trigger does not operate properly . Guard against electric shock.
Page 5 SKU 47612 For technical questions, please call 1-800-444-3353. Rev 06k T ake caution, as some woods contain preservatives such as copper chromi- 25. um arsenate (CCA) which can be toxic. When stapling or nailing these materials extra care should be taken to avoid inhalation and minimize skin contact.
Page 6 SKU 47612 For technical questions, please call 1-800-444-3353. Unpacking When unpacking, check to make sure all parts shown in the Parts List on page 1 1 are in- cluded. If any parts are missing or broken, please call Harbor Freight T ools at the number on the cover of this manual as soon as possible.
Page 7 SKU 47612 For technical questions, please call 1-800-444-3353. the tool res, stop immediately and have it repaired by a qualied service techni - cian. Depress the nose against the workpiece and squeeze the T rigger (47). 8. The tool must cycle (re) only once.
Page 8 SKU 47612 For technical questions, please call 1-800-444-3353. Operating the Nailer A LWA Y S WEAR A NSI A PPRO VED IMP ACT SAF ETY GOG GLES WHE N RELOADING OR DOING ANY OTHER MAINTENANCE ON THIS TOOL. Other people in the work area must also wear ANSI approved impact safety goggles.
Page 9 SKU 47612 For technical questions, please call 1-800-444-3353. Clearing Jams A LWA Y S WEAR A NSI A PPRO VED IMP ACT SAF ETY GOG GLES WHE N CLEARING JAMS OR DOING ANY OTHER MAINTENANCE ON THIS T OOL. Other people in the work area must also wear ANSI approved impact safety goggles.
Page 10 SKU 47612 For technical questions, please call 1-800-444-3353. Inspection, Maintenance, and Cleaning 1. Inspect the Nailer frequently and lubricate periodically with Pneumatic tool oil, then wipe dry . Do not use detergent oil or additives as these lubricants will cause accelerated wear to the internal seals.
Page 1 1 SKU 47612 For technical questions, please call 1-800-444-3353. P ARTS LIST NOTE: Some parts are listed and shown for illustration purposes only , and are not available individually as replacement parts.
Page 12 SKU 47612 For technical questions, please call 1-800-444-3353. ASSEMBL Y DIAGRAM NOTE: Some parts are listed and shown for illustration purposes only , and are not available individually as replacement parts.
Ein wichtiger Punkt beim Kauf des Geräts Harbor Freight Tools 47612 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Harbor Freight Tools 47612 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Harbor Freight Tools 47612 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Harbor Freight Tools 47612 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Harbor Freight Tools 47612 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Harbor Freight Tools 47612 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Harbor Freight Tools 47612 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Harbor Freight Tools 47612. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Harbor Freight Tools 47612 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.