Benutzeranleitung / Produktwartung 40070 des Produzenten Harbor Freight Tools
Zur Seite of 12
HAND FINISHING ORBIT AL SANDER ASSEMBL Y AND OPERA TING INSTR UCTIONS 3491 Mission Oaks Blvd., Camarillo , CA 93011 Visit our W eb site at http://www .
Page 2 SKU 40070 For technical questions, please call 1-800-444-3353. SA VE THIS MANU AL Y ou will need this manual f or the safety warnings and precautions, assembl y , operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Page 3 SKU 40070 For technical questions, please call 1-800-444-3353. ELECTRICAL SAFETY 4. Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in an y way .
Page 4 SKU 40070 For technical questions, please call 1-800-444-3353. 14. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the power tool in unexpected situations. 15. Use safety equipment.
Page 5 SKU 40070 For technical questions, please call 1-800-444-3353. SPECIFIC SAFETY RULES 1. Maintain labels and nameplates on the Sander . These carr y impor tant information. If unreadable or missing, contact Harbor F reight T ools f or a replacement.
Page 6 SKU 40070 For technical questions, please call 1-800-444-3353. and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic par ticles. (California Health & Safety Code § 25249.5, et seq.
Page 7 SKU 40070 For technical questions, please call 1-800-444-3353. wire connected to the tool’ s grounding system and must ne v er be attached to an electrically “live” terminal. (See Figure A.) 3. Y our tool must be plugged into an appropr iate outlet, proper ly installed and grounded in accordance with all codes and ordinances.
Page 8 SKU 40070 For technical questions, please call 1-800-444-3353. EXTENSION CORDS 1. Grounded tools require a three wire extension cord. Double Insulated tools can use either a two or three wire extension cord. 2 . As the distance from the supply outlet increases, you must use a heavier gauge extension cord.
Page 9 SKU 40070 For technical questions, please call 1-800-444-3353. SYMBOLOGY UNP A CKING When unpacking, chec k to make sure that the item is intact and undamaged. If any par ts are missing or broken, please call Harbor F reight T ools at the number shown on the co ver of this manual as soon as possible.
Page 10 SKU 40070 For technical questions, please call 1-800-444-3353. ATT A CHING SANDP APER T O THE BA CKING PAD (28) 1. Press the tab on the Clamps (6) inward on both sides of the unit and swing the clamps on both sides up , out, and down. See 1 & 2 , right.
Page 11 SKU 40070 For technical questions, please call 1-800-444-3353. INSPECTION, MAINTENANCE, AND CLEANING 1. W ARNING! Make sure the P ower Switch (3) of the Sander is in its “OFF” position and that the tool is unplugged from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
Page 12 SKU 40070 For technical questions, please call 1-800-444-3353. ASSEMBL Y DIA GRAM NO TE: Some par ts are listed and shown for illustr ation purposes only , and are not av ailable individu- ally as replacement par ts. Part 0 - Dust Collection Chute - not shown.
Ein wichtiger Punkt beim Kauf des Geräts Harbor Freight Tools 40070 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Harbor Freight Tools 40070 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Harbor Freight Tools 40070 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Harbor Freight Tools 40070 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Harbor Freight Tools 40070 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Harbor Freight Tools 40070 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Harbor Freight Tools 40070 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Harbor Freight Tools 40070. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Harbor Freight Tools 40070 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.