Benutzeranleitung / Produktwartung PH-4210D des Produzenten Haier
Zur Seite of 34
Please read this manual carefully and completely before operating the unit, and retain this manual for future reference. PLASMA TV OWNER`S MANUAL MODEL: PH-4210D.
2 Plasma TV THIS S YMBOL IN DICA TES T HA T H IGH V OL TAG E IS PRESENT INSIDE. IT IS D ANGEROUS TO MAKE A NY KIND O F C ONTAC T WITH A NY INSIDE PA RT OF THIS P RODUCT. WARNING : T o reduce the risk of electric shock do not remove cover or back. No user-serviceable parts inside refer service to qualified service personnel.
Owner s Manual 3 IMPORT ANT SAFETY INSTRUCTIONS Read all of the instructions before using this appliance. When using this appliance, always exercise basic safety precautions, including the following: 1)Save these Instructions ---the safety and operating instructions should be retained for future reference.
4 Plasma TV b.If liquid has been spilled, or objects have been fallen into the unit. c.If the unit has been exposed to rain or water. d.If the unit does not operate normally by following the operating instructions.
Owner s Manual 5 Warning..............................................................2 Safety Instructions............................................ 3-4 Introduction Controls...........................................................6 Connection Options.
EXIT INPUT MENU Signal source selection Down/Up. Sel ct desired option on MENU or tune to the desired channel. e VOLUME Buttons MENU Button Power On/Off Button Remote Control Sensor illuminates red in.
AC-INPUT DVI VGA L-AUDIO-R AV IN S-VIDEO VIDEO L-AUDIO-R AV OUT VIDEO AUDIO DVI IN AUDIO VGA IN COMPONENT IN Pr/Cr Pb/Cb Y L-AUDIO-R L R AUDIO OUT VGA Input/Audio input DVD/DTV Input Connect a compone.
When using the remote control. Aim it towards the remote sensor on the TV. 3 2 1 8 Plasma TV Installing Batteries Open the battery compartment cover on the back side and install the batteries matching correct polarity (+ with +, - with -). Install two 1.
VIDEO INPUT POWER PC AUTO DVI MUTE EXIT AVC DISPLAY DNR MENU / LOCK CALENDAR CC RATING FREEZE SURROUND ARC ENTER SAVING SLEEP P.STD S.STD VOL+ VOL- M4X12 x8 Screws 4 Standx1 Brace pole x2 M5X16 x4 Screws Owner s Manual 9 GROUNDING Ensure that you connect the earth ground wire to prevent possible electric shock.
10 Plasma TV Do not leave a still picture from a VCR on the screen for an extended period. If the 4:3 format is used, the fixed images on the sides of the screen may remain visible on the screen if this format is used day after day . This is known as burn-in, and it is an uneven wear of the screen area.
Owner s Manual 11 How to connect Connect the audio and video cables from the external equipment's output jacks to the TV`s A V IN input jacks, as shown in the figure. When connecting the TV to external equipment, match the jack colors (V ideo = yellow , Audio Left = white, and Audio Right = red).
12 Plasma TV - T o watch digitally broadcast programs, purchase and connect a digital set-top box. Digital Set-top Box How to connect Use the COMPONENT (Y , Pb, Pr)IN jacks, VGA or DVI IN port for video connections, depending on your set-top box connections available.
Owner s Manual 13 How to connect 1. T o get the best picture quality , adjust the PC graphics card as required. 2. Use the `s VGA IN or DVI (Digital Visual Interface) IN port for video connections, depending on your PC connector.
Íâ¹ÒÑïÉùÆ÷ʹÓÃ˵Ã÷ 1 Face the Plasma screen upside down on a clean blanket and pay attention not to indent the casing. Lay the two speaker aside of the Plasma.
Installing the Stand Installing the Stand to the Plasma Owner s Manual 15 Insert the supporting bracket with 8 M4x12 screws to the installation holes on the bottom of the soleplate. Fasten the Supporting bracket and the Soleplate as shown in figure. Face the Plasma screen upside down on a clean blanket and pay attention not to indent the casing.
16 Plasma TV Turning on the TV just after installation. 1 . Connect power cord correctly to the television. 2. Press the SWITCH button on back of the TV. The TV is powered up and set in to standby mode. Press the POWER button on the remote control or button on the TV and then the TV will turn on.
Operation Menu 1. Press MENU button to open the main menu. Press VOL+/- button to select the PIC., SOU., ADJ., SYS. , FUN. or TIME menu. 2.Press CH+/- button to select submenu, and press VOL+/- button to increase/decrease the value or select the setup.
This TV set has three methods to set channels: Automatic search, manual search, and fine tune. In this section, how to use the remote control to set channels is explained. You can also use the buttons on the TV set to set channel. System Menu Color Sys.
Color System B C A Usually this should be set in the auto position. However if the color displayed on the screen is incorrect, you can manually select the correct color system. Press MENU and then VOL+/- button, till the picture menu shown on the right will display on the screen.
Picture Quality Adjustment Picture Quality Adjustment The TV menu gives you an overview of MENU you can select to adjust picture quality . Note: Depending on the input signal, one or more menu items may not be selectable.
Sound adjustment Sound Adjust 1. Press MENU button and then use VOL+/- button to select the SOU.menu. 2. Press CH+/- button for desired option. 3. After your option is selected, press VOL+/- button to adjust. Repeat step 2 and 3 until desired sound has been achieved.
Adjustment Setup Adjustment Setup When VGA DVI input mode is set VGA/DVI: Display M ode Full S creen Adjust RGB Reset Auto Sync. Color Te mper. Standard Black Stretch On B C A 1. Press MENU button on the remote controller and then use the VOL+/- to select the ADJ.
Function Setup Function Setup It is possible to select Menu Language, OSD translucency , position and screen display of the MENU as follows: 1. Press MENU button once, and then use VOL+/- button until.
Parental Guidance 24 Plasma TV Closed Caption Closed captioning is a process which displays the audio portion of a television program as written words which then appear as subtitles on the television screen. Closed captions allow viewers to read the dialogue and narration of television programs.
Ratings for Movies previously shown in theaters: Movie Ratings : NR (Permits all programs) G (General audience) PG (Parental guidance suggested) PG-13 (Parents strongly cautioned) R (Restricted) NC-17 (No one 17 and under admitted) X (Adult only) If you set PG-13 : G and PG movies will be available , PG-13, R, NC-17 and X will be blocked.
Time Setup If Off-time or On-time is intended in AV1/S-Video/YPbPr/YCbCr/VGA , follow the instructions as below: Clock 12:30 Off Time 20:30 On T ime 17:30 On CH 000 Remind T ime 19:00 Remind CH 000 B .
Lock Setup Lock Set PassWord Tuning Lock Off Preset CH Of f CH Num 1 Source Lock Child Lock Of f Max V olume 100 UnLock Change Password Note: The initial password is 0000, and the security default password is 9443. If Unlock is activated, the password setup cannot be changed.
Source Lock Source Lock is used to hinder external input modes, such as AV , S -V ideo and VGA. Press CH+/- button to select the option, and press VOL+/- button to display Source Lock menu. Source Lock AV1 Off S-Video Off YPbPr/YCbCr Off VGA Off DVI Off Child Lock Max V olume Unlock Press CH+/- button to select Unlock mode.
- RGB (PC) mode only; This function doesn`t work in RGB-DTV mode. - Automatically adjusts picture position and minimizes image shaking. - After adjustment, if the image is still not correct, your TV may need further adjustment. - The Auto sync is not active in DVI mode.
Check whether the TV is turned on from both front button and the back switch. Is the power cord inserted into wall power outlet? T est the wall power outlet, plug another product`s power cord into the outlet where the TV`s power cord was plugged in. No picture & No sound Press the VOL+ button.
- Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of running time you will have your new TV . Be sure to turn the power off and unplug the power cord before you begin any cleaning. 1 . Here`s a great way to keep the dust off your screen for a while.
Dimensen(WXHXD) Unit::inches/mm 41.5 x25.7 x3.4 /1055x654x86 " " " 66.2/30 PH-4210D Speakers Impedance Input consumption 8 2x7W ~ 100-240 Volts , 50/60Hz Size(WxHxD) (inches/mm) Weight (pounds/kg) 4.3x21.9x2.4/1 10x556x62 2x5.5/2x2.5 The specifications shown above may be changed without notice for quality improvement.
What PWW will do: Pay an authorized PWW Service Center the labor charges to repair your television. Pay an authorized PWW Service Center for the new , or at our option, refurbished- replacement parts required to repair your television.
V0.1 0090506987A.
Ein wichtiger Punkt beim Kauf des Geräts Haier PH-4210D (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Haier PH-4210D noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Haier PH-4210D - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Haier PH-4210D reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Haier PH-4210D erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Haier PH-4210D besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Haier PH-4210D verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Haier PH-4210D. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Haier PH-4210D gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
