Benutzeranleitung / Produktwartung AD1024 des Produzenten American Dynamics
Zur Seite of 90
Model AD1024 MegaPower II Matrix Switching Bays Installation and Operating Instructions This manual describes the installation and operating procedures for the American Dynamics model AD1024 Matrix Switching System Bays.
This software/firmware is confidential to and is copyrighted by SENSORMA TIC ELECTRONICS CORPORA TION. It is not to be copied or disclosed in any manner without the express written consent of SENSORMA TIC. The software is furnished to the purchaser under a license for use on a single system.
The installation of this product should be made by qualified service personnel and should conform to all local codes. QA301D ! W W W W A A A A R R R R N N N N II I I N N N N G G G G To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.
.
CONTENTS Page General Description .........................................................................1 System Modules Description Power Supply Module 2010PS ..................................................2 Data Buffer Module 2010DB...........
CONTENTS Page System Configurations Level 1 Systems Level 1 - 256 X 16, One Bay with No T itles .....................20 Level 1 - 192 X 16, One Bay System ................................21 Level 1 - 448 X 16, T wo Bay System .........................
GENERAL DESCRIPTION The MegaPower II AD1024 Switcher/Control System is an integrated matrix switching and control system for CCTV surveillance systems. It is capable of controlling up to 1024 video input sources such as cameras, and 128 video outputs such as monitors and video tape recorders.
SYSTEM MODULES The following pages describe the plug-in modules available for AD1024 switching bays. These include: Power Supply Module, 2010PS Data Buffer Module, 2010DB V ideo Loss Detection Data Bu.
Power Supply Module - Rear Panel Figure 2 is the illustration associated with the features described below . 8- SERIAL # T AG: Serial number assigned to this AD1024 switching bay . 9- DA T A LINE IN: Input for DA T A LINE. 10- DA T A LINE OUT : Looping output for DA T A LINE.
Data Buffer Module - 2010DB The Data Buffer Module serves a dual purpose. First, it distributes switched video, from the bay's V ideo Input Modules, to other bays in multiple bay systems. The video observed from these outputs contain no character information, only standard video.
5 SYSTEM MODULES DESCRIPTION 1 6 Output 16 Output 8 8 1 Output 1 9 4 1 2 1 3 5 Data Buffer Module - 2010DB (continued) 1 6 Output 16 Output 8 8 1 Output 1 9 4 1 2 1 3 5 1 6 Output 16 Output 8 8 1 Outp.
V ideo Loss Detection Data Buffer Module - 2010DBVL The V ideo Loss Detector Data Buffer Module provides the same capabilities as the 2010DB Data Buffer Module, with one significant addition. First, it distributes switched input video, with no character information, to multiple bay systems.
When a video loss is detected, a video loss message is transmitted from the 2010DBVL via the RJ45 connector RS- 232 pins. An alarm contact is also provided by pins 1 and 2 of this connector .
V ideo Input Modules - 2016A VIM The 2016A VIM performs the actual video switching in the AD1024 switching bay . Each module can switch any one of 16 video inputs to any video output, or multiple combinations of video outputs, up to 16. The 16 video inputs to the module are connected at the rear panel associated with the video input module.
V ideo Output Module - 2024VOM The 2024VOM (V ideo Output Module) creates the titles that are added to the video output. Each module has four video outputs on its rear panel.
Master Date Time Module - 2024MDT The 2024MDT Master Date T ime Module provides looping connection of the video input signals and insertion of system time and date information on the video output connections. These modules are used with dedicated inputs for dedicated outputs, and do not perform any inter-bay switching.
INST ALLA TION Mounting Bays are manufactured for standard 19-inch rack mounting and have a rack height of 10 1/2-inches, or one rack wide by 6 racks high. Bays must be installed with a minimum of 1 3/4- inch clearance between each bay (one rack unit).
SETUP SETUP - Internal Jumper Switches Data Buffer Module Switches The 2010DB Data Buffer Module serves a dual purpose. First, it sends video to the monitors and second, it filters incoming information from the high speed LAN line. Filtering is accomplished with two 8-position DIP switches, S2 and S3.
SETUP V ideo Loss Detector Data Buffer Module Switches The 2010DBVL (V ideo Loss Detector Data Buffer Module) is similar to the 2010DB, with the added capability of video loss detection for each camera of the bay . A video loss detection message is transmitted via the RJ45 port on the 2010DBVL rear panel.
SETUP V ideo Input Module Switches The 2016A VIM (V ideo Input Module) performs the actual video switch. Each module can switch any one of 16 video inputs to any video output, or multiple combinations of video outputs, up to 16. The 2016A V ideo Input Module must be set to the cameras and monitors it is to respond to.
T able 3 - S1 Camera and Monitor Identification (continued) Switch Positions Camera 1 2 3 4 5 6 7 8 193-208 X X 001100 209-224 X X 001101 225-240 X X 001110 241-256 X X 001111 257-272 X X 010000 273-2.
SETUP V ideo Output Module Switches The 2024VOM (V ideo Output Module) adds character information in the form of titles and time and date to switched video from 2016A VIM modules. Each 2024VOM card contains 2-pin jumpers and one 8-position DIP switch (see Figure 28).
T able 5 - S2 Video Output Identification 1=On 0=Off Switch Positions V ideo Output 5 6 7 8 1 t o 4 0000 5 t o 8 1000 9 t o 1 2 0100 1 3 t o 1 6 1100 1 7 t o 2 0 0010 2 1 t o 2 4 1010 2 5 t o 2 8 0110.
Power Supply Set Up - V ertical Phase Adjustment The matrix switching bays are designed as vertical interval switches, thus giving the matrix switching bay the ability to switch between properly phased video inputs without producing a vertical roll, or a black bar , between each video switch.
POWERING UP The system may be brought on line after: - The CPU has been installed and connected. - A video input has been connected. - A monitor has been connected for viewing the output. - All lines have been properly terminated. - One keyboard (or external computer) has been connected for control.
SYSTEM CONFIGURA TIONS SYSTEM CONFIGURA TIONS The following sections of this manual are organized specific to the system level to be installed. A level is defined as 16 video outputs, and may consist of one to several bays.
LEVEL 1 - 256 X 15, One Bay System with V ideo Loss Detection A one bay , Level 1 system, with video loss detection and without video titles, allows a maximum of 256 video inputs switched to a maximum of 15 video outputs.
LEVEL 1 - 448 X 16, T wo Bay System A two bay , Level 1 system allows a maximum of 448 video inputs switched to a maximum 16 video outputs. Bay one consists of the first 256 video inputs. Bay two consists of the remaining 192 video inputs and four video output modules.
LEVEL 1 - 704 X 16, Three Bay System A three bay , Level 1 system allows a maximum of 704 video inputs switched to a maximum 16 video outputs. Bays one and two consist of 256 video inputs and bay three consists of 192 video inputs and 16 video outputs.
SYSTEM CONFIGURA TIONS LEVEL 1 - 960 X 16, Four Bay System A four bay , Level 1 system allows a maximum of 960 video inputs switched to a maximum 16 video outputs. Bays one, two, and three each consist of 256 video inputs. Bay four consists of 192 video inputs and 16 video outputs.
LEVEL 1 - 1024 X 16, Five Bay System A five bay , Level 1 system allows a maximum of 1024 video inputs switched to a maximum 16 video outputs. Bays one through four each consists of 256 video inputs, and bay five consists of the 16 video outputs.
V ideo Input Connections : See LEVEL 1 - 448 X 16, T wo Bay System and connect in a similar manner . V ideo Output Connections : Each 2024VOM-2 has a rear panel with 20 BNCs. The right most module is assigned to outputs 1-4. The next module is for outputs 5-8, etc.
LEVEL 2 SYSTEMS Level 2 systems use up to nine matrix switching bays each with the 2010PS Power Supply Module and either the 2010DB or the 2010DBVL Data Buf fer Module. Depending on the configuration, either 2010R Standard bays or 2020R Condensed bays are used in Level 2 systems.
LEVEL 2 - 192 X 32, T wo Bay System A two bay , Level 2 system allows a maximum of 192 video inputs switched to a maximum 32 video outputs. Bay one consists of 192 video inputs with the first group of 16 video outputs. Bay two consists of the same 192 video inputs with the second group of 16 video outputs.
LEVEL 2 - 320 X 32, Three Bay System A three bay , Level 2 system allows a maximum of 320 video inputs switched to a maximum 32 video outputs. Bay one consists of 256 video inputs for the first 16 video outputs and bay two consists of 256 video inputs for the second group of 16 video outputs.
LEVEL 2 - 448 X 32, Four Bay System A four bay , Level 2 system allows a maximum of 448 video inputs switched to a maximum 32 video outputs. Bay one consists of 256 video inputs, bay two consists of 192 video inputs with the first group of 16 video outputs.
LEVEL 2 - 704 X 32, Six Bay System A six bay , Level 2 system allows a maximum of 704 video inputs switched to a maximum 32 video outputs. Bays one and two each consist of 256 video inputs. Bay three consists of 192 video inputs with the first group of 16 video outputs.
LEVEL 2 - 960 X 32, Eight Bay System. An eight bay , Level 2 system allows a maximum of 960 video inputs switched to a maximum 32 video outputs. Bays one, two, and three each consist of 256 video inputs. Bay four consists of 192 video inputs with the first group 16 video outputs.
If there are less than eight 2024VOMs in the system the remaining BNCs on the 2010DB-XX do not require any connection. V ideo Input Connections: See LEVEL 2 - 192 X 32, T wo Bay System and connect in a similar manner . V ideo Output Connections: See LEVEL 2 - 192 X 32, T wo Bay System and connect in a similar manner .
SYSTEM CONFIGURA TIONS LEVEL 2 - 1024 X 32, Nine Bay System A nine bay , Level 2 system allows a maximum of 1024 video inputs switched to a maximum 32 video outputs. Bays one through eight each consists of 256 video inputs, and bay nine consists of the first 32 video outputs.
Connect the topmost BNC from bay 3 on the 2010DB-31 panel, numbered 1, to the 2024VOM-2 in bay 9, for output 1, matching icon to icon. Continue in this manner until connections 1-4 of the 2010DB- 31 panel are connected to inputs 1-4 of the 2024VOM-2.
SYSTEM CONFIGURA TIONS LEVEL 3 SYSTEMS Level 3 systems use up to fourteen 2010 matrix switching bays each with the 2010PS Power Supply Module and 2010DB-XX Data Buffer module. Level 3 systems can consist of up to 192, 448, 704, 768, 960, or 1024 video inputs and up to 48 video outputs, arranged as 2, 3, 4, 6, 7, 9, 10, 12, and 14 bay systems.
Unused video inputs do not require any external connection or termination, and may be left open. V ideo Output Connections : Each 2024VOM-1 has a rear panel with 16 BNCs. The bottom four BNCs are used for video output connections. The left-most module is assigned to outputs 1-4, the next for outputs 5-7, etc.
SYSTEM CONFIGURA TIONS LEVEL 3 - 448 X 48, Six Bay System A six bay , Level 3 systems allows a maximum of 448 video inputs switched to a maximum 48 video outputs.
LEVEL 3 - 512 X 48, Seven Bay System A seven bay , Level 3 system allows a maximum of 512 video inputs switched to a maximum 48 video outputs. Bays one through six consists of 256 video inputs, and bay seven consists of 48 video outputs.
SYSTEM CONFIGURA TIONS LEVEL 3- 704 X 48, Nine Bay System A nine bay , Level 3 system allows a maximum of 704 video inputs switched to a maximum 48 video outputs. Bays one, two, four , five, seven, and eight consists of 256 video inputs each. Bay three consists of 192 video inputs with the first group of 16 video outputs.
Continue in this manner until connections 1-4 of the 2010DB- 12 panel are connected to inputs 1-4 of the 2024VOM-1 of bay 3. Proceed to the next group of four BNCs on the 2010DB-12 and connect these four to the second 2024VOM-1 for outputs 5-8.
SYSTEM CONFIGURA TIONS LEVEL 3 - 768 X 48, T en Bay System A seven bay , Level 3 system allows a maximum of 768 video inputs switched to a maximum 48 video outputs. Bays one through nine consists of 256 video inputs, and bay ten consists of 48 video outputs.
Continue in this manner until connections 1-4 of the 2010DB- 12 panel are connected to inputs 1-4 of the 2024VOM-1. Proceed to the next group of four BNCs on the 2010DB-12 and connect these four to the second 2024VOM-1 for outputs 5-8.
LEVEL 3 - 960 X 48, T welve Bay System The twelve bay Level 3 system allows a maximum of 960 video inputs switched to a maximum 48 video outputs. Bays one, two, three, five, six, seven , nine, ten and.
Continue in this manner until connections 1-4 of the 2010DB- 1 1 panel are connected to inputs 1-4 of the first 2024VOM-1 of bay 4. Proceed to the next group of four BNCs on the 2010DB-1 1 of the first bay and connect these four to the second 2024VOM-1 for outputs 5-8.
SYSTEM CONFIGURA TIONS LEVEL 3 - 1024 X 48, Fourteen Bay System A fourteen bay , Level 3 System allows a maximum of 1024 video inputs switched to a maximum 48 video outputs. Bays one through twelve consists of 256 video inputs, and bay thirteen consists of the first 32 video outputs and bay 14 consists of the second group of 16 video outputs.
Each 2024VOM-2 is similarly grouped with four sections of four BNCs, with identifying icons. A fifth group of four BNCs (lower left-hand corner) is used for video output. The left- most 2024VOM-2 module is assigned to outputs 1-4, the next for outputs 5-8, etc.
ADULP Loop Panel used with AD1024 Systems For information on the use of the AD Universal Loop Panel (ADULP) with AD1024 (or AD2050) switching systems, see AD Universal Loop Panel Installation Instructions , Part Number 8000-0900-01 .
.
.
Appendix.
.
2 2 2 2 5 5 5 5 6 6 6 6 I I I I N N N N P P P P U U U U T T T T S S S S X X X X 1 1 1 1 6 6 6 6 O O O O U U U U T T T T P P P P U U U U T T T T S S S S - - - - W W W W i i i i t t t t h h h h N N N N .
1 1 1 1 9 9 9 9 2 2 2 2 I I I I N N N N P P P P U U U U T T T T S S S S X X X X 1 1 1 1 6 6 6 6 O O O O U U U U T T T T P P P P U U U U T T T T S S S S L L L L e e e e v v v v e e e e l l l l 1 1 1 1 .
DATA LINE IN OUT SYNC 120 VAC 50/60 Hz 1 1 1 1 5 5 5 5 9 9 9 9 1 1 1 1 3 3 3 3 1 1 1 1 1 1 1 1 7 7 7 7 3 3 3 3 3 3 3 3 4 4 4 4 9 9 9 9 6 6 6 6 5 5 5 5 8 8 8 8 1 1 1 1 9 9 9 9 7 7 7 7 1 1 1 1 1 1 1 1 3.
7 7 7 7 0 0 0 0 4 4 4 4 I I I I N N N N P P P P U U U U T T T T S S S S X X X X 1 1 1 1 6 6 6 6 O O O O U U U U T T T T P P P P U U U U T T T T S S S S ( ( ( ( P P P P a a a a g g g g e e e e 1 1 1 1 .
IN OUT SYNC 120 VAC 50/60 Hz 1 1 1 1 5 5 5 5 9 9 9 9 1 1 1 1 3 3 3 3 2 2 2 2 5 5 5 5 7 7 7 7 4 4 4 4 9 9 9 9 7 7 7 7 16 IN OUT SYNC 120 VAC 50/60 Hz 1 1 1 1 5 5 5 5 9 9 9 9 1 1 1 1 3 3 3 3 1 1 1 1 2 2.
9 9 9 9 6 6 6 6 0 0 0 0 I I I I N N N N P P P P U U U U T T T T S S S S X X X X 1 1 1 1 6 6 6 6 O O O O U U U U T T T T P P P P U U U U T T T T S S S S ( ( ( ( P P P P a a a a g g g g e e e e 1 1 1 1 .
IN OUT SYNC 120 VAC 50/60 Hz 1 1 1 1 5 5 5 5 9 9 9 9 1 1 1 1 3 3 3 3 2 2 2 2 5 5 5 5 7 7 7 7 4 4 4 4 9 9 9 9 7 7 7 7 16 IN OUT SYNC 120 VAC 50/60 Hz 1 1 1 1 5 5 5 5 9 9 9 9 1 1 1 1 3 3 3 3 1 1 1 1 2 2.
6 6 6 6 4 4 4 4 I I I I N N N N P P P P U U U U T T T T S S S S X X X X 3 3 3 3 2 2 2 2 O O O O U U U U T T T T P P P P U U U U T T T T S S S S L L L L e e e e v v v v e e e e l l l l 2 2 2 2 - - - - .
1 1 1 1 9 9 9 9 2 2 2 2 I I I I N N N N P P P P U U U U T T T T S S S S X X X X 3 3 3 3 2 2 2 2 O O O O U U U U T T T T P P P P U U U U T T T T S S S S L L L L e e e e v v v v e e e e l l l l 2 2 2 2 .
1 1 1 1 7 7 7 7 1 1 1 1 8 8 8 8 1 1 1 1 9 9 9 9 2 2 2 2 0 0 0 0 2 2 2 2 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 2 2 2 2 4 4 4 4 2 2 2 2 5 5 5 5 2 2 2 2 6 6 6 6 2 2 2 2 7 7 7 7 2 2 2 2 8 8 8 8 2 2 2 2 .
4 4 4 4 4 4 4 4 8 8 8 8 I I I I N N N N P P P P U U U U T T T T S S S S X X X X 3 3 3 3 2 2 2 2 O O O O U U U U T T T T P P P P U U U U T T T T S S S S L L L L e e e e v v v v e e e e l l l l 2 2 2 2 .
1 1 1 1 7 7 7 7 1 1 1 1 8 8 8 8 1 1 1 1 9 9 9 9 2 2 2 2 0 0 0 0 2 2 2 2 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 2 2 2 2 4 4 4 4 2 2 2 2 5 5 5 5 2 2 2 2 6 6 6 6 2 2 2 2 7 7 7 7 2 2 2 2 8 8 8 8 2 2 2 2 .
IN OUT SYNC 120 VAC 50/60 Hz 1 1 1 1 7 7 7 7 2 2 2 2 1 1 1 1 2 2 2 2 5 5 5 5 2 2 2 2 9 9 9 9 2 2 2 2 6 6 6 6 5 5 5 5 O O O O U U U U T T T T 2 2 2 2 8 8 8 8 1 1 1 1 3 3 3 3 1 1 1 1 3 3 3 3 3 3 3 3 2 2.
9 9 9 9 6 6 6 6 0 0 0 0 I I I I N N N N P P P P U U U U T T T T S S S S X X X X 3 3 3 3 2 2 2 2 O O O O U U U U T T T T P P P P U U U U T T T T S S S S ( ( ( ( P P P P a a a a g g g g e e e e 1 1 1 1 .
9 9 9 9 6 6 6 6 0 0 0 0 I I I I N N N N P P P P U U U U T T T T S S S S X X X X 3 3 3 3 2 2 2 2 O O O O U U U U T T T T P P P P U U U U T T T T S S S S ( ( ( ( P P P P A A A A G G G G E E E E 2 2 2 2 .
1 1 1 1 9 9 9 9 2 2 2 2 I I I I N N N N P P P P U U U U T T T T S S S S X X X X 4 4 4 4 8 8 8 8 O O O O U U U U T T T T P P P P U U U U T T T T S S S S L L L L e e e e v v v v e e e e l l l l 3 3 3 3 .
DATA LINE IN OUT 2 2 2 2 5 5 5 5 6 6 6 6 I I I I N N N N P P P P U U U U T T T T S S S S X X X X 4 4 4 4 8 8 8 8 O O O O U U U U T T T T P P P P U U U U T T T T S S S S L L L L e e e e v v v v e e e e.
4 4 4 4 4 4 4 4 8 8 8 8 I I I I N N N N P P P P U U U U T T T T S S S S X X X X 4 4 4 4 8 8 8 8 O O O O U U U U T T T T P P P P U U U U T T T T S S S S L L L L e e e e v v v v e e e e l l l l 3 3 3 3 .
7 7 7 7 0 0 0 0 4 4 4 4 I I I I N N N N P P P P U U U U T T T T S S S S X X X X 4 4 4 4 8 8 8 8 O O O O U U U U T T T T P P P P U U U U T T T T S S S S ( ( ( ( P P P P a a a a g g g g e e e e 1 1 1 1 .
IN OUT SYNC 120 VAC 50/60 Hz 1 1 1 1 5 5 5 5 9 9 9 9 1 1 1 1 3 3 3 3 O O O O U U U U T T T T O O O O U U U U T T T T O O O O U U U U T T T T O O O O U U U U T T T T O O O O U U U U T T T T O O O O U U.
7 7 7 7 6 6 6 6 8 8 8 8 I I I I N N N N P P P P U U U U T T T T S S S S X X X X 4 4 4 4 8 8 8 8 O O O O U U U U T T T T P P P P U U U U T T T T S S S S ( ( ( ( P P P P a a a a g g g g e e e e 1 1 1 1 .
IN OUT SYNC 120 VAC 50/60 Hz 1 1 1 1 5 5 5 5 9 9 9 9 1 1 1 1 3 3 3 3 2 2 2 2 7 7 7 7 3 3 3 3 2 2 2 2 8 8 8 8 9 9 9 9 3 3 3 3 0 0 0 0 5 5 5 5 3 3 3 3 2 2 2 2 1 1 1 1 3 3 3 3 3 3 3 3 7 7 7 7 3 3 3 3 5 5.
6 6 6 6 4 4 4 4 I I I I N N N N P P P P U U U U T T T T S S S S X X X X 1 1 1 1 2 2 2 2 8 8 8 8 O O O O U U U U T T T T P P P P U U U U T T T T S S S S L L L L e e e e v v v v e e e e l l l l 8 8 8 8 .
2 2 2 2 5 5 5 5 6 6 6 6 I I I I N N N N P P P P U U U U T T T T S S S S X X X X 1 1 1 1 5 5 5 5 O O O O U U U U T T T T P P P P U U U U T T T T S S S S - - - - W W W W i i i i t t t t h h h h V V V V .
256 INPUTS X 15 OUTPUTS With Video Loss Detection and Alarm Outputs Level 1 - 1 Bay A19 2 2 2 2 4 4 4 4 1 1 1 1 2010R 1 1 1 1 1 1 1 1 5 5 5 5 Video Loss Detection alarm output from 2010DBVL module 1 1.
2010DBVL to AD1981 Port Expander to AD1024 CPU to CPU THREE CONDUCTOR SHIELDED BELDEN 8770 OR EQUIVALENT RED GREEN 123 4 5 6789 12345 6789 KBD d AD1981 12345 6789 RED GREEN 2010DBVL 2010DBVL Up to fou.
448 INPUTS X 15 OUTPUTS - With Video Loss Detection Level 1 - 2 Bays with AD1981 Port Expander A21 DATA LINE 120 VAC 50/60 Hz 1 1 1 1 1 1 1 1 5 5 5 5 2 2 2 2 5 5 5 5 7 7 7 7 4 4 4 4 3 3 3 3 3 3 3 3 1 .
INPUT BAY 1-256 2010DB-1X INPUT BAY 257-512 2010DB-2X INPUT BAY 512-768 2010DB-3X OUTPUT 1-4 2024VOM-1 Video Interconnections (Page 1) Input Bays to Video Output Modules Outputs 1 - 4 A22 1 1 1 1 4 4 .
Video Interconnections (Page 2) Input Bays to Video Output Modules Outputs 125 - 128 INPUT BAY 1-256 2010DB-1X INPUT BAY 257-512 2010DB-2X INPUT BAY 512-768 2010DB-3X OUTPUT 125-128 2024VOM-1 1 1 1 1 .
.
DECL ARA TION OF CONFORMITY According to ISO/IEC G uide 22 and EN45014 Manufacturer’s N ame: Sensormati c Elect ronics Corporation Manufacturer’s A ddress: 1 Bl ue Hill Plaza 2 nd Floor Pearl Rive.
SPECIFIC A TIONS: Supply V oltage: AD1024R: 120 V AC, 50/60 Hz, 50 W ADS1024RX: 230 V AC, 50/60 Hz, 0.50 A T emperatu r e: 0 o C - 60 o C (32 o F - 140 o F) Humidity: Relative humidity between 0% and 95% non-condensing Mounting: Free standing or rack-mount Size: 19" W x 10.
Ein wichtiger Punkt beim Kauf des Geräts American Dynamics AD1024 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie American Dynamics AD1024 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für American Dynamics AD1024 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von American Dynamics AD1024 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über American Dynamics AD1024 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon American Dynamics AD1024 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von American Dynamics AD1024 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit American Dynamics AD1024. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei American Dynamics AD1024 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
