Benutzeranleitung / Produktwartung DW12-PFE2-E des Produzenten Haier
Zur Seite of 28
Dishwasher DW12-PFE2-E Instructions for Use 0120505343 EN DE FR IT NL CZ SL TR.
Table of Contents (EN) Safety information – – – – – – – – – – – – – – – – – – – – – 1 Installation – – – – – – – – – – – – – – –.
1 Safety information EN At time of delivery • Check packaging and dishwasher immediately for signs of transport damage. If the appliance is dam- aged, do not put it into use but contact your supplier or customer service without delay . • Please dispose of packaging materials properly .
2 EN If your family inc ludes children • The appliance is not intended for use by young children or infirm persons without supervision. • Y oung children should be super vised to ensure that they do not play with the appliance. • Keep detergents out of the reach of children, who must also be kept away from the dishwasher when it is open.
3 Installation EN P ositioning the appliance Positioning the appliance in the desired loca tion. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to facilitate proper installation.
4 EN Drain hose connection Insert the drain hose into a drain pipe with a minimum diameter of 4cm, or let it run into the sink, making sure to avoid bending or crimping it. If necessary , fit a syphon trap (U-bend) with a connecting piece for the drain hose (fig.
5 Getting to know your dishwasher EN Close-up view (control panel) A ON-OFF Button B C “Speedup Wash” Indicator D Delayed Start Button E Delayed Start Indicator F Time-remaining Indicator G Low Sa.
6 How to fill the salt EN Salt The hardness of the wa ter varies from place to place. If hard water is used in the dishwasher , deposits will form on the dishes and utensils. The appliance is equipped with a special softener that uses a salt specifically designed to eliminate lime and minerals from the water .
7 EN Adjusting salt consumption The dishwasher is designed to allow for adjusting the amount of salt consumed based on the hardness of the water used. This is intended to optimize and customize the level of salt consumption so that it remains at a minimum.
8 How to fill rinse aid EN Rinse aid This product makes dishes sparkle and helps them to dr y without spotting. The dispenser is located on the inside panel of the door .
9 Not suitable for the dishwasher EN What you should not put into the dishwasher Cutlery and tableware manufactured in whole or part from wood.They become faded and unsightly in ap- pearance.Furthermore,the adhesives that are used are not suitable for the temperature that occur inside the dishwasher .
10 Arranging crockery , glasses, etc. in the dishwasher EN Before placing the dishes in the dishwasher , remove larger food partic les to prevent the filter from becoming clogged, which results in reduced performance. If the pots and pans have baked-on food that is extremely hard to remove, we recommend that they are soaked before washed.
11 How to use the upper rack The upper rack is designed to hold more delica te and lighter dishware, such as glasses, cups and saucers, plates, small bowls and shallow pans (as long as they are not too dirty). • Position the dishes and cookware so that they do not get moved by the spray of water .
12 Wash programme T ype of croker y e.g. china, pots/pans, cutiery , glasses, etc T ype of food remains Amount of food remains Condition of food remains Description of cyc le Speedup Wash Pre-wash with hot water . Extended wash at 70°C. Rinses with cold water .
13 • • • • • • • • • • • • Delayed Start Detergent Extended Wash Prewash Rinse Aid 25g 5g 15g 5g 25g 5g 5g 5g 5g – – – – – – 15g 25g 20g 15g 15g 10g 10g – – –.
14 Washing dishes EN Programme selection The most a ppropriate programme can be identified by comparing the type of crocker y , cutlery , etc., as well as the amount and condition of food remains, with the details contained in the wash cycle table.
15 EN End of programme • Six beeps will indicate that the wash cycle has finished and all the programme indicators light. Switching the dishwasher OFF Several minutes after the programme has ended: • Set main switch “ A ” to OFF . • Open the door .
16 EN • If the the door is closed, after 5 seconds the delayed start indica tor “ E ” lights , the time-remaining indicator “ F ” will blink and decrease , the programme will start until the delayed start indicator “ F ” goes out .
17 How to keep your dishwasher in shape EN After Every Wash After every wash, turn off the wa ter supply the appliance and lea ve the door slightly ajar so that moisture and odors are not trapped inside. Remove the plug Before cleaning or performing maintenance, always remove the plug from the socket.
18 Care and maintenance EN Regular inspection and maintenance of your appliance helps to prevent problems from occurring.This sa ves time and a ggravation.
19 EN Spray arms Lime and remnants of food in the washing water can block the nozzles in the spray arms “ 10 ” and “ 11 ” and the arm mountings. • Inspect the nozzles in the spray arms for blocked holes due to remnants of food. • If necessary , pull the lower arm “ 11 ” upwards and lift it off.
20 F ault finding EN Resolving minor problems yourself Experience has shown that you can resolve most problems that rise during normal daily usage yourself, without having to call out a service engineer .Not only does this sa ve costs,but it also means that the appliance is available for use again tha t much sooner .
21 When the programme indicators “J1, J3, J4” blink. Have you checked whether: • the drain hose is crimped or bent. • the drain hose is too high. EN When the programme indicators “J1, J2, J6” blink. Have you checked whether: • the drain hose is too low.
22 EN Water remains inside appliance after programme has ended • Blockage or kind in drainage hose. • Pump is jammed. • Filters are blocked. • The programme is still running. Wait for the programme to end ...during washing Unusual amount of foam is creased • Normal washing up liquid has been poured into the rinse-aid container .
23 EN Plastic items are discoloured • Not enough detergent was added to dispenser . • Detergent has insuffcient bleaching properties. Use a detergent containing a chemical bleaching agent. White stains are left on crockery , glasses have a milky appearance • Not enough detergent was added to dispenser compartment.
24 T echnical data EN Width 60 cm Depth 60 cm Height 85 cm Capacity 12 standard place settings Mains water pressure 0.03-0.6MPa Power voltage 220-240V~ 50Hz Maximum current intensity 10A T otal absorbed power 1950W Important information Notes on waste disposal Old a ppliances still ha ve some residual value.
25 General information • Measures must be taken to ensure that built-under and built-in units that are subsequently re-sited as free-standing appliances cannot topple over . This can be achieved by bolting the dishwasher to the wall or fitting it under a continuous work surface which is screwed to the adjacent cupboards.
26 EN A: Wiring box B: Door s witch C: Water level switch D: Drain pump motor E: Dispenser F: Softener valve M: Low salt s witch N: Low rinse aid switch O: T emperature sensor P: Flowmeter G: Overflo.
Ein wichtiger Punkt beim Kauf des Geräts Haier DW12-PFE2-E (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Haier DW12-PFE2-E noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Haier DW12-PFE2-E - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Haier DW12-PFE2-E reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Haier DW12-PFE2-E erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Haier DW12-PFE2-E besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Haier DW12-PFE2-E verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Haier DW12-PFE2-E. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Haier DW12-PFE2-E gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
