Benutzeranleitung / Produktwartung Hot Surface Ignition System ADG-530 des Produzenten American Dryer Corp.
Zur Seite of 44
ADC Part No. 450308 American Dryer Corporation 88 Currant Road Fall River , MA 02720-4781 T elephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail: techsupport@amdry .
Retain This Manual In A Safe Place For Futur e Refer ence American Dryer Corporation products embody advanced concepts in engineering, design, and safety . If this product is properly maintained, it will provide many years of safe, efficient, and trouble free operation.
Table of Contents Left Coin Panel Assembly For Models Mfd. as of July 1, 1995 ............................................................................................. ..... 3 Right Coin Panel Assembly For Models Mfd. as of July 1, 1995 ..........
Lint Drawer/Switch Assembly I For Models Mfd. prior to September 6, 1996 with “Roller T ype Switch” .. ....................................... 21 Coin Box/V ault Assembly (Left and Right) ...........................................................
3 T e lephone: (508) 678-9000 Fax: (508) 678-9447 Left Coin Panel Assembly For Models Mfd. as of July 1, 1995 Illus. No. Part No. Qty . Description 1 8 81 1 6 3 1 25¢ U.S. Hanke Coin Acceptor with Optic Switch 881450 1 25¢ Canadian Hanke Coin Acceptor with Optic Switch 881451 1 0.
4 American Dryer Corporation 88 Curr ant Road / F all Riv er , MA 02720-4781 Right Coin Panel Assembly For Models Mfd. as of July 1, 1995 Illus. No. Part No. Qty . Description 1 8 81 1 6 3 1 25¢ U.S. Hanke Coin Acceptor with Optic Switch 881450 1 25¢ Canadian Hanke Coin Acceptor with Optic Switch 881451 1 0.
5 T e lephone: (508) 678-9000 Fax: (508) 678-9447 Illus. No. Part No. Qty . Description 1 8 81 1 6 3 1 25¢ U.S. Hanke Coin Acceptor with Optic Switch 2 8 8 1 14 3 1 Hanke Optic Switch with Connector 3 8 8 1 16 0 1 Coin Panel ONL Y 8 81 1 6 4 1 Phase II Coin Panel with Label (includes illus.
6 American Dryer Corporation 88 Curr ant Road / F all Riv er , MA 02720-4781 Right/Left Coin Panel Assembly For Models Mfd. prior to July 1, 1995* Illus.
7 T e lephone: (508) 678-9000 Fax: (508) 678-9447 Micr opr ocessor 2-Piece (Computer) Panel/Coin Chute Assembly For Models Mfd. as of August 26, 1996 Illus.
8 American Dryer Corporation 88 Curr ant Road / F all Riv er , MA 02720-4781 Micr opr ocessor 2-Piece (Computer) Panel/Coin Chute Assembly For Models Mfd.
9 T e lephone: (508) 678-9000 Fax: (508) 678-9447 Micr opr ocessor 1-Piece (Computer) Panel Assembly For Models Mfd. between May 9, 1995 and February 20, 1996 Illus.
10 American Dryer Corporation 88 Curr ant Road / F all Riv er , MA 02720-4781 Micr opr ocessor 2-Piece (Computer) Panel/Coin Chute Assembly For Models Mfd.
11 T e lephone: (508) 678-9000 Fax: (508) 678-9447 Fr ont Panel Assembly For Models Mfd. as of July 1, 1995 Illus. No. Part No. Qty . Description 1 881243* 1 R.H. T extured Front Panel Assembly (includes illus. nos. 1, 7, and 8) 881446 1 R.H. S tainless Steel Front Panel Assembly (includes illus.
12 American Dryer Corporation 88 Curr ant Road / F all Riv er , MA 02720-4781 Fr ont Panel Assembly For Models Mfd. prior to July 1, 1995 Illus. No. Part No.
13 T e lephone: (508) 678-9000 Fax: (508) 678-9447 Main Door “S teel’ ’ Assembly For Models Mfd. as of July 1, 1995 Illus. No. Part No. Qty . Description 1 8 8 1 15 0 1 Black Main Door Assembly Complete (includes illus. nos. 1, 2, and 8 through 15) 881207 1 S tainless Steel Main Door Assembly Complete (includes illus.
14 American Dryer Corporation 88 Curr ant Road / F all Riv er , MA 02720-4781 Main Door (Plastic) Assembly For Models Mfd. prior to July 1, 1995 Illus. No. Part No. Qty . Description 1 881422 1 Black Plastic (latch) Main Door Assembly (includes illus.
15 T e lephone: (508) 678-9000 Fax: (508) 678-9447 Main Door Switch Assembly For Models Mfd. as of July 1, 1995 Illus. No. Part No. Qty . Description 1 153566 2 #6-32 x 7/8” Clinch Stud 2 152013 2 #.
16 American Dryer Corporation 88 Curr ant Road / F all Riv er , MA 02720-4781 Main Door Switch Assembly For Models Mfd. prior to July 1, 1995 Illus. No.
17 T e lephone: (508) 678-9000 Fax: (508) 678-9447 Micr opr ocessor T emperatur e Sensor Bracket Assembly Illus. No. Part No. Qty . Description 1 853021 1 Sensor Bracket ONL Y 881090 1 Microprocessor T emperature Sensor Bracket Assembly Complete (includes illus.
18 American Dryer Corporation 88 Curr ant Road / F all Riv er , MA 02720-4781 Lint Drawer/Basket Assembly II For Models Mfd. as of September 6, 1996 Illus.
19 T e lephone: (508) 678-9000 Fax: (508) 678-9447 Lint Drawer/Basket Assembly I For Models Mfd. prior to September 6, 1996 with “Roller” T ype Lint Drawer Switch Illus.
20 American Dryer Corporation 88 Curr ant Road / F all Riv er , MA 02720-4781 Lint Drawer/Switch Assembly II For Models Mfd. as of September 6, 1996 Illus.
21 T e lephone: (508) 678-9000 Fax: (508) 678-9447 Illus. No. Part No. Qty . Description 1 150002 2 #6-32 x 1” Phillips Round Head Machine Screw 2 881095 1 Lint Drawer Switch Bracket I ONL Y 3 13699.
22 American Dryer Corporation 88 Curr ant Road / F all Riv er , MA 02720-4781 Illus. No. Part No. Qty . Description 1 8 81 1 7 4 1 Black Left/Right Coin Box Faceplate ONL Y 8 81 1 6 8 1 Left Coin Box .
23 T e lephone: (508) 678-9000 Fax: (508) 678-9447 Sail Switch/Hi-Limit Assembly Illus. No. Part No. Qty . Description 1 881223 1 Burner T unnel Assembly 2 130401 1 330º Hi-Limit 3 150300 2 #10-16 x .
24 American Dryer Corporation 88 Curr ant Road / F all Riv er , MA 02720-4781 Rear Electrical Panel Assembly For Models Mfd. as of July 1, 1995.
25 T e lephone: (508) 678-9000 Fax: (508) 678-9447 Illus. No. Part No. Qty . Description 1 881452 1 S tep Down T ransformer - 115 V AC 881453 1 S tep Down T ransformer - 208 V AC 881454 1 S tep Down T.
26 American Dryer Corporation 88 Curr ant Road / F all Riv er , MA 02720-4781 Rear Electrical Panel Assembly For Models Mfd. prior to July 1, 1995.
27 T e lephone: (508) 678-9000 Fax: (508) 678-9447 Illus. No. Part No. Qty . Description 1 141403 1 S tep Down T ransformer 2 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw 3 152014 2 1/4-20 Fre.
28 American Dryer Corporation 88 Curr ant Road / F all Riv er , MA 02720-4781 Basket (T umbler)/Support Assembly.
29 T e lephone: (508) 678-9000 Fax: (508) 678-9447 Illus. No. Part No. Qty . Description 1 800831 1 Galvanized Basket (tumbler) and Support Assembly Complete with Felt Collar (includes illus.
30 American Dryer Corporation 88 Curr ant Road / F all Riv er , MA 02720-4781 Basket (T umbler) Bearing Mount Assembly.
31 T e lephone: (508) 678-9000 Fax: (508) 678-9447 Illus. No. Part No. Qty . Description 1 880203 1 1-3/8” Flange Bearing 880938 1 Cone Point Setscrew Kit.
32 American Dryer Corporation 88 Curr ant Road / F all Riv er , MA 02720-4781 Burner T rain Assembly.
33 T e lephone: (508) 678-9000 Fax: (508) 678-9447 Illus. No. Part No. Qty . Description 1 142502 1 1/2” x 3/4” Street Elbow 2 881372 1 1/2” F .P . T . Straight Shutoff Assembly (with tailpiece and collar) 3 318713 1 Gas V alve Bracket 4 128927 1 1/2” 24 V AC (natural gas) Gas V alve 880960 1 1/2” 24 V AC (liquid propane [L.
34 American Dryer Corporation 88 Curr ant Road / F all Riv er , MA 02720-4781 Drive Motor Mount Assembly (60 Hz).
35 T e lephone: (508) 678-9000 Fax: (508) 678-9447 Illus. No. Part No. Qty . Description 1 100718 1 3/16” x 3/16” x 2-1/4” Key (for models mfd. as of January 23, 1996) 100705 1 3/16” x 3/16” x 1-3/8” Key (for models mfd. prior to January 23, 1996) 2 101205 1 2.
36 American Dryer Corporation 88 Curr ant Road / F all Riv er , MA 02720-4781 Fan (Impellor)/Idler Bearing Assembly (60 Hz).
37 T e lephone: (508) 678-9000 Fax: (508) 678-9447 Illus. No. Part No. Qty . Description 1 100701 1 3 / 1 6 ” x 3 / 1 6 ” x 1 ” K e y 2 101206 1 2.
38 American Dryer Corporation 88 Curr ant Road / F all Riv er , MA 02720-4781 Drive and Idler Belts/Pulleys (60 Hz) Illus. No. Part No. Qty . Description 1 --------- 1 Basket (tumbler) Support (refer .
39 T e lephone: (508) 678-9000 Fax: (508) 678-9447 Illus. No. Part No. Qty . Description 1 143536 1 6 ” x 4 5 º El b o w 2 143536 2 6 ” x 4 5 º El b o w 1 17505 6 Duct T ape (sold by the foot)...Not Illustrated 881373 1 6 ” x 45º Elbow with 6” Damper .
40 American Dryer Corporation 88 Curr ant Road / F all Riv er , MA 02720-4781 Illus. No. Part No. Qty . Description 1 353147 2 Upper and Lower Back Guard 2 150301 14 #8-18 x 7/16” Phillips Pan Head TEK Screw 3 1 12041 1 Caution - Exhausted Label 4 1 12086 1 Installation Instruction Label 5 103500 4 Leveling Leg (for models mfd.
41 T e lephone: (508) 678-9000 Fax: (508) 678-9447 Additional Parts A vailable Part No. Description 1 12183 I n s t a ll a t i on/Operator ’ s Manual 1 12533 Phase 5 Coin “PROGRAM LOCA TION SUMMAR.
ADC 450308 1 - 11/04/95-100 2 * 02/09/96-100 3 * 09/27/96-100 4 * 10/24/96-100 5 * 12/05/96-100 6 - 09/28/00-25 7 - 03/16/01-25 8 - 02/03/03-10 9 * 01/06/04-1.
Ein wichtiger Punkt beim Kauf des Geräts American Dryer Corp. Hot Surface Ignition System ADG-530 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie American Dryer Corp. Hot Surface Ignition System ADG-530 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für American Dryer Corp. Hot Surface Ignition System ADG-530 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von American Dryer Corp. Hot Surface Ignition System ADG-530 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über American Dryer Corp. Hot Surface Ignition System ADG-530 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon American Dryer Corp. Hot Surface Ignition System ADG-530 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von American Dryer Corp. Hot Surface Ignition System ADG-530 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit American Dryer Corp. Hot Surface Ignition System ADG-530. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei American Dryer Corp. Hot Surface Ignition System ADG-530 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
