Benutzeranleitung / Produktwartung UMS 5101 CDC des Produzenten Grundig
Zur Seite of 38
HIFI STEREO MICRO SYSTEM ǵ ENGLISH VERTIGA UMS 5101 CDC 72011 401 4900.
2 CONTENTS ________________________________________________________________________ 3 Set-up and safety 4 Overview Controls on the stereo system The display on the stereo system The back of the stereo.
ENGLISH 3 SET -UP AND SAFETY ______________________________________________ Please note the following information when setting up the system: This stereo system is designed for the playback of audio signals.
4 OVER VIEW _______________________________________________________________________ Controls on the stereo system Controls on the fr ont O Infrared receiver for remote control signals. • Stand-by indicator . y Headphone jack for connecting a stereo headphone set with a jack plug (ø 3.
OVER VIEW __________________________________________________________________________________ ENGLISH 5 – VOLUME + Adjust the volume. X-BASS For boosting the bass. VOCAL Switches the VOCAL sound setting on and off. DSC Selects the various sound settings.
OVER VIEW __________________________________________________________________________________ 6 The display on the stereo system J Show the level of the input source. Indicates that the bass is boosted. SURROUND Surround sound is activated. VOCAL The VOCAL sound setting is activated.
OVER VIEW __________________________________________________________________________________ ENGLISH 7 G Show the number of the CD ready for playback. CD 24 74.59 Shows the total number of tracks and the total playing time of a CD. F Indicates CD playback.
8 OVER VIEW __________________________________________________________________________________ The back of the stereo system FM EXT Antenna socket for the rooftop antenna or the supplied wire aerial. AM EXT Aerial terminals for the wire antenna supplied.
ENGLISH 9 OVER VIEW __________________________________________________________________________________ The remote control 9 Switches the stereo system into and out of stand-by mode. SLEEP For activating and setting the sleep timer . DIMMER Switches the display between three brightness levels.
10 OVER VIEW __________________________________________________________________________________ PROGRAM In tuner mode: for step-by-step selection of stored UP/DOWN radio stations. In CD mode: for selecting CD tracks in order to create a track memor y .
ENGLISH 11 CONNECTION AND PREP ARA TION _______ Connecting the antenna 1 Insert the rooftop antenna in the antenna socket » FM E X T « on the stereo system. Note: If no rooftop antenna is available, use the auxiliar y aerial supplied. This aerial provides reasonably good reception of local FM (VHF) stations.
12 CONNECTION AND PREP ARA TION _______________________________________ Connecting a digital recording device 1 Connect the » DIGIT AL OPTICAL OUT « socket on the stereo system to the appropriate socket on the external device (e.g., MD or CDR) with an OPTICAL cable.
ENGLISH 13 CONNECTION AND PREP ARA TION _______________________________________ Inserting batteries in the remote control 1 Open the batter y compartment by pushing down the lid of the batter y compartment. 2 When inserting the batteries (Mignon type, for example AA, R6, UM3), obser ve the polarity marked on the base of the batter y compartment.
14 SETTINGS ____________________________________________________________________________ Setting the clock Setting the time manually The time can be manually set while the device is in operation. 1 Press and hold down » DISPLA Y « on the device. – Display: the time, with the hours flashing.
ENGLISH 15 SETTINGS ____________________________________________________________________________________ T uning to radio stations … … with the automatic station search With the activation of this function, the device automatically searches for the first signals it receives on the FM and MW bands.
16 SETTINGS ____________________________________________________________________________________ … with the manual search 1 Press » TUNER /BAND « to switch on the device. – Display: The frequency band (» FM « or » MW «) and the frequency . 2 Select the frequency band (FM or MW) by pressing the » TUNER/BAND « button.
ENGLISH 17 GENERAL FUNCTIONS _________________________________________ Switching on and off 1 Switch the stereo system on out of stand-by mode by pressing » 9 «. – Display: Briefly , » H ELLO «. – The last input source used is automatically selected.
18 GENERAL FUNCTIONS ______________________________________________________________ Sound settings Y ou can select between seven different sound settings: Y ou can select between ”FLA T”, ”LIVE”, ”PHANTOM”, ”EXCITE”, ”POP”, ”BEA T”, according to the type of music you are listening to.
ENGLISH 19 TUNER MODE ________________________________________________________________ Selecting the tuner input source 1 Select the input source using the » TUNER /BAND « button. – Display: the most recently selected radio station. Selecting the preset position 1 Select the frequency band (FM or MW) by pressing the » TUNER /BAND « button.
20 TUNER MODE _____________________________________________________________________________ RDS station ser vice and pr ogram types (PTY) RDS (Radio Data System) is an information system which is transmitted additio- nally by most FM stations.
ENGLISH 21 TUNER MODE _____________________________________________________________________________ Radiotext Some RDS stations offer Radiotext as additional infor mation. Radiotext appears as ticker text in the display . As this information is transmitted character by character , it may take some time before the text is received in full.
TUNER MODE _____________________________________________________________________________ 22 Searching for program types 1 Call up the PTY search function by pressing » PTY/EON « on the remote control. – Display: » PTY SELECT «. 2 Select the program type using » 5 a « or » s 6 « on the remote control.
TUNER MODE _____________________________________________________________________________ ENGLISH 23 3 T o confirm the selected setting press » PTY/EON « again on the remote control. – Display: »T A«, »NEWS« or »INFO«. – The EON function is activated.
24 CD MODE ___________________________________________________________________________ Basic CD mode functions The stereo system is suitable for music CDs displaying the logo shown here or for CD-Rs with audio data. Always keep the disc compartment closed to prevent dust from collecting on the laser optics.
ENGLISH 25 CD MODE ____________________________________________________________________________________ 1 Open all CD compartments by pressing » ALL EJECT « on the device. – Display: » CD ALL OPEN «. 2 Insert the desired CDs in the compar tment with the labels facing upward.
26 CD MODE ____________________________________________________________________________________ Replacing individual CDs Y ou can replace a CD which is currently not being used during playback. 1 Open the compartment of the unused CD by pressing, e.g.
ENGLISH 27 CD MODE ____________________________________________________________________________________ Special CD mode features Searching for a passage within a track 1 During playback, press » 5 a « or » s 6 « on the remote control and hold it down until you find the desired passage.
28 CD MODE ____________________________________________________________________________________ Repeating a track (Repeat One) 1 Select the desired track using » 5 a « or » s 6 « on the remote control. 2 Select the Repeat function by pressing » REPEA T « once on the remote control.
CD MODE ____________________________________________________________________________________ ENGLISH 29 Playing back tracks in selected order – creating a track memor y Y ou can create a track memor y of up to 20 tracks for the current CD in any order you choose and then play them back in that sequence.
CD MODE ____________________________________________________________________________________ 30 Adding more tracks 1 During playback of track memor y , press » 7 «. 2 Select the desired track using » PROGRAM UP/DOWN « on the remote control. – Display: e.
ENGLISH 31 TIMER MODE __________________________________________________________________ Y our stereo system has two timer modes: – The switch-on timer , which switches the stereo system on and of f at a pre-set time. – The sleep timer , which switches the stereo system off at a pre-set time.
32 TIMER MODE ______________________________________________________________________________ 7 Select the desired input source (» CD «, » TUNER « or » AUX «) with the » MUL TI JOG « function wheel on the device and press » TIMER SET « to confirm.
ENGLISH 33 TIMER MODE ______________________________________________________________________________ Sleep timer Setting the sleep timer 1 Press » 9 « to switch on the device. 2 Select the function by pressing » SLEEP « on the remote control. – Display: » SLEEP «, » 30 « flashes.
34 INFORMA TION _____________________________________________________________ Cleaning the CD unit If the device is unable to scan CDs perfectly , use a standard, commercially available cleaning CD to clean the laser optics. Other cleaning methods may damage the laser optics.
ENGLISH 35 INFORMA TION __________________________________________________________________________ Additional information for units sold in the UK. Units sold in the UK are suitable for operation from a 240V ac, 50Hz mains supply . The range of multi-system receivers is built to work in most European countries.
36 INFORMA TION __________________________________________________________________________ Rectifying minor problems Not ever y kind of sound interference is caused by a defect in your stereo system. Impair- ment can also be caused by leads having been accidentally pulled out, damaged CDs and worn out batteries in the remote control.
ENGLISH 37 INFORMA TION __________________________________________________________________________ GRUNDIG Ser vice GRUNDIG BELUX N.V . Deltapark, Weihoek 3, Unit 3G B-1930 Zaventem +32/2-7 16 04 00 GRUNDIG UK L TD.
Grundig AG • Beuthener Str . 41 • D-90471 Nürnberg • http://www .grundig.com.
Ein wichtiger Punkt beim Kauf des Geräts Grundig UMS 5101 CDC (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Grundig UMS 5101 CDC noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Grundig UMS 5101 CDC - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Grundig UMS 5101 CDC reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Grundig UMS 5101 CDC erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Grundig UMS 5101 CDC besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Grundig UMS 5101 CDC verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Grundig UMS 5101 CDC. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Grundig UMS 5101 CDC gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
