Benutzeranleitung / Produktwartung G1258 des Produzenten Grizzly
Zur Seite of 26
20" BANDSAW MODEL G1258 INSTRUCTION MANUAL COPYRIGHT © 1992 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
.
G1258 20" Bandsaw -1- Table Of Contents PAGE 1. SAFETY ....................................................................................................................2 SAFETY SYMBOLS ..........................................................
-2- G1258 20" Bandsaw Safety Instructions For Power Tools SECTION 1: SAFETY For Your Own Safety Read Instruction Manual Before Operating This Equipment Failure to obey a DANGER symbol and notation WILL result in serious personal injury including loss of life or body parts.
G1258 20" Bandsaw -3- Safety Instructions For Power Tools 14. MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest performance. Follow instructions for lubri- cating and changing accessories. 15. DISCONNECT TOOLS before servicing and changing accessories, such as blades, bits, cutters, and the like.
-4- G1258 20" Bandsaw Additional Safety Instructions For Bandsaws No list of safety guidelines can be com- plete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other machinery with caution and respect.
G1258 20" Bandsaw -5- 220V Operation SECTION 2: CIRCUIT REQUIREMENTS Your Model G1258 Bandsaw is supplied with a single phase 220V only motor. Under normal use, the motor draws approximately 15 amps @ 220V. We recommend a 20 amp circuit breaker or slow- blow fuse.
To operate this or any power tool safely and efficiently, it is essential to become as familiar with it as possible. The time you invest before you begin to use your Model G1258 will be time well spent. DO NOT operate this machine until you are com- pletely familiar with the contents of this manual.
G1258 20" Bandsaw -7- Unpacking The bandsaw is shipped from the factory in a carefully packed carton. If you find the machine to be damaged after you’ve signed for delivery and the truck and driver are already gone, you will need to file a freight claim with the carrier.
-8- G1258 20" Bandsaw Clean Up The unpainted surfaces are coated with a waxy oil to protect it from corrosion during shipment. Remove the protective coating with common paint thinner (mineral spirits) and paper towels. Do not use gasoline or other petroleum based solvents because of their extremely low flash points.
G1258 20" Bandsaw -9- SECTION 4: ASSEMBLY Fence Most of your G1258 20'' bandsaw has been assembled at the factory. Only the fence assem- bly requires installation. To mount the fence to the bandsaw table: 1. Mount the front rail to the table using the 2 5 ⁄ 16 -18 x 2 1 ⁄ 2 '' Cap Screws and the 2 Spacers provided.
-10- G1258 20" Bandsaw SECTION 5: ADJUSTMENTS Tracking To adjust the tracking: 1. Disconnect the bandsaw from the power source and open the top and bottom wheel covers. Adjust the upper and lower guide assemblies away from the blade. 2. Loosen the lock nut on the tracking knob.
G1258 20" Bandsaw -11- Normally Steps 1-4 are implemented prior to installing a new blade. To adjust the upper guides: 1. Loosen the bearing guide shaft lock nuts. 2. The bearing guides are mounted on an eccentric shaft. With a regular screwdriver, rotate the guides away from the blade.
-12- G1258 20" Bandsaw 7. Now rotate the bearing guide shafts until the bearings are approximately 1 ⁄ 64 '' from the blade. Hold the shafts in place with a screw driver and tighten the bearing guide lock nuts. The guide bearing, when adjusted cor- rectly, should have a slight drag against the blade.
G1258 20" Bandsaw -13- After changing a blade, the upper and lower blade support bearings and guide blocks must be readjusted. Always adjust the guide assemblies away from the blade before installing a new blade or making blade adjustments. To change blades: 1.
-14- G1258 20" Bandsaw SECTION 6: OPERATIONS Overview Test Run The bandsaw is one of the most versatile wood cutting tools in the shop. It is capable of perform- ing many different cutting functions including, but not limited to: STRAIGHT CUTS 1.
G1258 20" Bandsaw -15- A bandsaw blade is a delicate piece of steel that is subjected to tremendous strain. You can obtain long use from a bandsaw blade if you give it fair treatment. Be sure you use blades with proper width and temper for the various types of cutting operations.
-16- G1258 20" Bandsaw 5. Draw a reference line on the edge of the board. 6. Support ends of the board if necessary. 7. Feed work slowly and evenly. Cutting Curves When cutting curves, simultaneously feed and turn the stock carefully so that the blade follows the layout line without being twisted.
G1258 20" Bandsaw -17- SECTION 7: MAINTENANCE Shielded and pre-lubricated ball bearings require no lubrication for the life of the bearings. All bear- ings are standard sizes and replacements can be purchased from our parts department or your local bearing supply store.
-18- G1258 20" Bandsaw The following pages contain general machine data, parts diagrams/lists, and Warranty/Return information for your Model G1258 20" Bandsaw. If you need parts or help in assembling your machine, or if you need operational information, we encourage you to call our Service Department.
G1258 20" Bandsaw -19- Customer Service #: (570) 326-3806 • To Order Call: (800) 523-4777 • Fax #: (800) 438-5901 GRIZZLY MODEL G1258 20" BANDSAW MACHINE DATA SHEET Design Type: ...........................................................
PARTS DIAGRAM AND PARTS LIST.
G1258 20" Bandsaw -21- REF PART # DESCRIPTION REF PART # DESCRIPTION 01 P1258001 BODY 02 P1258002 BEARING BASE 03 P6305 BEARING 6305-2RS 04 P1258004 SHAFT 05 PK28M KEY 7 X 7 X 29 06 PN03 HEX NUT .
-22- G1258 20" Bandsaw Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.
CUT ALONG DOTTED LINE 10. Which benchtop tools do you own? Check all that apply. ___1" x 42" Belt Sander ___6" - 8" Grinder ___5" - 8" Drill Press ___Mini Lathe ___8".
FOLD ALONG DOTTED LINE FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 Place Stamp Here TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name_____________________________.
Ein wichtiger Punkt beim Kauf des Geräts Grizzly G1258 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Grizzly G1258 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Grizzly G1258 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Grizzly G1258 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Grizzly G1258 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Grizzly G1258 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Grizzly G1258 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Grizzly G1258. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Grizzly G1258 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
