Benutzeranleitung / Produktwartung VR4940 des Produzenten Go-Video
Zur Seite of 60
DVD R ecorder+VCR User Manual VR4940.
2 Safety Precautions The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
INTRODUCTION 3 IMPORT ANT SAFETY INSTRUCTIONS 1. Read these instructions. - All these safety and oper- ating instructions should be read before the product is operated. 2. Keep these instructions. - The safety , operating and use instructions should be retained for future refer- ence.
4 T able of Contents INTRODUCTION VR4940 Overvie w . . . . . . . . . . . . . . . . . . . . . 6-9 Recordable Discs . . . . . . . . . . . . . . . . . . . . . . . 6 Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . 6 Disc-related T erms . .
T able of Contents INTRODUCTION 5 PLA YBACK DVD and V ideo CD Playback . . . . . . . . . . . 30-33 Playing a DVD or V ideo CD . . . . . . . . . . . . . . 30 • Selecting T itles . . . . . . . . . . . . . . . . . . . . 30 • Selecting Chapters . . . .
6 VR4940 Overview Recordable Discs When you buy recordable discs, look for products with the following logos: 12cm/8cm, single-sided, single layer disc. Approx. max. recording time (LP mode): 240 minutes (4.7GB), 80 minutes (1.46GB) 12cm/8cm, single-sided, single layer disc.
INTRODUCTION 7 VR4940 Overview (Continued) About DVD-R and DVD-RW Discs How are DVD-R and DVD-RW discs different? DVD-R is a record-once medium, while DVD-RW is a re-recordable/erasable medium. Y ou can re-record/ erase a DVD-RW disc approximately 1,000 times.
VR4940 Overview (Continued) Notes for Recording • The recording times shown are not exact because the DVD Recorder+VCR uses variable bit-rate video com- pression.
INTRODUCTION 9 VR4940 Overview (Continued) Precautions Handling the Unit When shipping the unit The original shipping carton and packing materials come in handy .
10 Front Panel Overview EJECT EJECT COPY DVD VCR DVD VCR POWER CH PAUSE PLAY REW STOP FF REC SELECT AV 2 IN DV IN L - AUDIO - R S-VIDEO V ID E O REC ( z ) Starts recording. Press repeatedly to set the recording time. CH ( V / v ) Scans up or down through memorized channels.
11 INTRODUCTION Front Panel Display Overview ST Indicates that a stereo broadcast is being received. Disc T ype indicators Indicates the type of disc loaded. Hi-Fi Indicates when the DVD Recorder+VCR is playing or recording a tape in Hi-Fi. COPY Indicates that a DVD to VCR (or VCR to DVD) copy is in progress.
TV TV PO WER CH VOL 1 2 3 4 5 6 789 0 ENTER VCR REC TRACK+ TRACK- CHILD LOCK REW FF PA USE/STEP STOP PLA Y DISPLA Y REC MODE TIMER RECORD EJECT INPUT COPY CLEAR TV/VCR TV POWER MUTE TV INPUT SETUP CH .
INTRODUCTION 13 Rear Panel Overview IN (FROM ANT .) OUT (TO TV) RF DVD + VCR OUT R L R L R L VIDEO Pr Pb Y COMPONENT/ PROGRESSIVE VIDEO OUT AV OUT A UDIO OUT AV 1 IN S-VIDEO OUT VIDEO DIGIT AL A UDIO OUT DIGIT AL A UDIO OUT OPTICAL COAXIAL Caution Do not touch the inner pins of the jacks on the rear panel.
Connections ips There are a variety of ways to connect the DVD Recorder+VCR to your TV and other equipment. Use only one of the connections described below .
CONNECTIONS & SETUP 15 Connections (Continued) Connecting a TV Choose one of the following TV connections, depending on the capabilities of your equipment.
Connections (Continued) 16 Connecting an Amplifier/Receiver Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/ Pro Logic Connect the Left and Right AUDIO OUT jacks on the DVD Recorder+VCR to the left and right audio in jacks on your amplifier , receiver , or stereo system, using the supplied audio cables (A) .
CONNECTIONS & SETUP 17 Connecting Optional Equipment Connect the A V 1 IN or A V 2 IN jacks on the DVD Recorder+VCR to the audio/video out jacks on your external component, using optional audio/video cables. ote If you use the S-VIDEO jack on the front panel, there will be no signal output from the front panel VIDEO jack.
18 Setup Menu Overview The DVD Recorder+VCR Setup menu includes system settings in six categories GENERAL, LANGUAGE, AUDIO, LOCK, RECORD and DISC. Press SETUP on the remote control to view the first and second levels of the Setup menu, and press B to display the third level .
CONNECTIONS & SETUP 19 Initial Setup (Continued) Channel Add/Delete This feature allows you to manually add or delete chan- nels from your channel list. 1 1 Follow steps 1-3 as shown under Auto Channel Set. 2 2 Use v / V to select the CH. Add/Del option.
20 Initial Setup (Continued) TV Aspect Ratio 4:3 Letterbox: Select when a standard 4:3 TV is con- nected. Displays theatrical images with masking bars above and below the picture. 4:3 Fullscreen: Select when a standard 4:3 TV is con- nected. Displays pictures cropped to fill your TV screen.
21 CONNECTIONS & SETUP Initial Setup (Continued) AUDIO Settings Each DVD disc has a variety of audio output options. Set the DVD Recorder+VCR’s Audio Output according to the type of audio system you use. Dolby Digital PCM: Select when connected to a 2-channel digital stereo amplifier .
Initial Setup (Continued) LOCK Settings Movie Rating The Lock feature allows you to prevent DVDs from being played based on their ratings or to have certain discs played with alternative scenes. 1 1 Press SETUP . The Setup menu appears. 2 2 Use v / V to select the Lock option.
Initial Setup (Continued) Country Code Enter the 2-letter code for the country/area whose stan- dards were used to rate your DVDs, referring to the “Country Code List” on page 54. 1 1 Press SETUP . The Setup menu appears. 2 2 Use v / V to select the Lock option.
DV Record Audio Y ou only need to set DV Record Audio if you have a digital camcorder with 32kHz/12-bit sound connected to the front panel DV IN jack. Some digital camcorders have two stereo tracks for audio. One is recorded at the time of shooting; the other is for overdubbing after shooting.
Initial Setup (Continued) DISC Finalize Finalizing a DVD-R/ R W ‘locks’ its recordings in place so the disc can be played on most standard DVD players or computers equipped with DVD-ROM drives. Finalizing a disc formatted in V ideo mode will automati- cally create a menu screen for navigating the disc.
Initial Setup (Continued) My DVD When you load a DVD with the My DVD feature turned on, the DVD Recorder+VCR will automatically search the disc for your Audio, Subtitle and Surround prefer- ences and choose them if available on the disc. Set My DVD to ON or OFF .
CONNECTIONS & SETUP 27 Initial Setup (Continued) On-Screen Display Overview The On-Screen Display provides feedback on the status of the DVD Recorder+VCR and/or the currently loaded disc or tape. T o access the On-Screen Display (or OSD), press the DISPLA Y button.
OSD Menu Options by Media T ype 28 Initial Setup (Continued) Menu Options T itle number Chapter number T ime search Audio language and Digital Audio Output mode Subtitle language Angle Sound Function (Use v / V to select desired option) Shows the current title number and total number of titles, and skips to the desired title number .
CONNECTIONS & SETUP 29 Menu Options T ime Audio channel Function (Use v / V to select desired option) S hows the elapsed playing time (Display only) . Shows the audio channel, and changes the audio channel. Selection Method – b / B 0:00:20 HIFI VCR SP Shows playback speed, recording information and elapsed playing time progress bar .
30 DVD and V ideo CD Playback Playing a DVD or V ideo CD Playback Setup Press the DVD button to set the remote control to operate the DVD deck. T urn the TV on and select the video input source con- nected to the DVD Recorder+VCR. Audio system: T urn the audio system on and select the input source connected to the DVD Recorder+VCR.
PLA YBACK 31 DVD and V ideo CD Playback (Continued) Playing a DVD or V ideo CD (Continued) Still Picture and Frame-by-Frame Playback 1 Press P AUSE/STEP ( X ) during playback. The DVD Recorder+VCR will go into Pause mode. 2 Y ou can back up or advance the picture frame-by- frame by pressing b / B repeatedly during Pause mode.
DVD and V ideo CD Playback (Continued) Playing a DVD o r V ideo CD (Continued) T ime Search The T ime Search function allows you to start playback from any chosen time on the disc. 1 Press DISPLA Y during playback. The on-screen dis- play appears on the TV screen.
PLA YBACK 33 DVD and V ideo CD Playback (Continued) Playing a DVD (Continued) Camera Angle If a DVD contains scenes recorded at different camera angles, you can select among these angles during play- back. Press ANGLE then press b / B repeatedly during playback to select the desired angle.
34 Audio CD and MP3 Operation Playing an Audio CD or MP3 Disc The DVD Recorder+VCR can play audio CDs and MP3 files on CD-ROM, CD-R or CD-RW discs. Before play- ing MP3 files, read “Notes on MP3 Recordings” at right. 1 1 Insert the disc and close the tray .
PLA YBACK 35 Audio CD and MP3 Operation (Continued) Pause 1 Press P AUSE/STEP during playback. 2 To return to playback, press PLA Y ( N ) or press P AUSE/STEP again. Skip T racks Press PREV ( . ) or NEXT ( > ) briefly during playback to go to the next track or to return to the beginning of the current track.
36 Program Playback with Audio CD and MP3 Program Playback enables you to make custom playlists of Audio CD or MP3 tracks. Programs can con- tain up to 99 Audio CD tracks or 256 MP3 tracks. 1 1 Insert an Audio CD or MP3 disc. The Audio CD or MP3 CD menu will appear .
PLA YBACK 37 V iewing a JPEG Disc The DVD Recorder+VCR can play discs with JPEG files. Before playing JPEG recordings, read “Notes on JPEG Recordings” at right. 1 Insert a disc and close the tray . The Photo menu appears on the TV screen. 2 2 Use vVbB to select a folder , then press ENTER.
VCR Playback 38 Before Y ou Begin Press the VCR button to set the remote control to operate the VCR deck. T urn the TV on and select the video input source con- nected to the DVD Recorder+VCR. Audio system: T urn the audio system on and select the input source connected to the DVD Recorder+VCR.
RECORDING 39 Basic Recording Recording from TV Follow the instructions below to record a TV program. 1 1 T urn on the DVD Recorder+VCR and load a recordable disc or tape. Make sure your TV input is set to view the DVD Recorder+VCR. • If you load a blank DVD-RW disc, you will be prompted to set the DISC Record mode.
One T ouch Copy - DVD to VHS Y ou can copy the contents of a DVD to a VHS tape using the COPY button. ote If the DVD you are attempting to copy is copy-protect- ed, you will not be able to copy the disc. It is not permit- ted to copy Macrovision encoded DVDs.
T imer Recording RECORDING 41 The T imer Recording function allows you to record up to 8 programs within a period of one month. 1 1 Press TIMER RECORD. The T imer Record menu appears. • Media – Choose the desired media (DVD or VCR). • Ch. – Choose the desired channel, or one of the external inputs from which to record.
Recording from an External Input 42 Recording from External Components Y ou can record from an external component, such as a camcorder or VCR, connected to any of the DVD Recorder+VCR’s external inputs. 1 1 Make sure the component you want to record from is connected properly to the DVD Recorder+VCR; see page 17.
RECORDING 43 Recording from an External Input (Continued) What is DV? Using DV , also known as i.LINK, you can connect a DV - equipped camcorder to the DVD Recorder+VCR using a single DV cable for input and output of audio, video, data and control signals.
VR Mode: Original and Playlist Editing 44 In this section, you will learn about editing DVD-RW discs in VR Mode. It is important to understand the difference between edits to the Original content of the disc and edits to the Playlist. Edits you make to the Original content of a disc change the actual content of the disc.
VR Mode: Original and Playlist Editing (Continued) Using the Original (Title) Menu The Original (T itle) menu is where you build and edit your Playlist, and where you can erase titles and make other changes to the Original content of the disc. Y ou can also play individual titles directly from the Original (T itle) menu.
VR Mode: Original and Playlist Editing (Continued) Using the Playlist (Title) Menu 1 1 Press DISC MENU/LIST repeatedly to display the Playlist (Title) menu. • Use the v / V buttons to display the previous/next page if there are more than 6 titles/chapters.
EDITING 47 VR Mode: Original and Playlist Editing (Continued) Naming a Title Y ou can name Original and Playlist titles independently . Names can be up to 32 characters long. 1 1 Press DISC MENU/LIST repeatedly to display the Original (Title) or Playlist (T itle) menu.
Erasing an Original or Playlist T itle/Chapter When you erase a title or chapter from the Playlist menu, you only remove it from the Playlist; the title/chapter remains in the Original menu.
VR Mode: Original and Playlist Editing (Continued) EDITING 49 Combining T wo Chapters Into One Use this function to combine two adjacent Playlist or Original chapters into one. 1 1 Press DISC MENU/LIST repeatedly to display the Original (Title) or Playlist (T itle) menu.
VR Mode: Original and Playlist Editing (Continued) Deleting a Part Y ou can erase a part which you do not want in a title. 1 1 Press DISC MENU/LIST repeatedly to display the Original (Title) or Playlist (T itle) menu. 2 2 Use vVbB to choose the title you want to delete then press ENTER.
V ideo Mode: Original Editing In this section, you will learn about editing DVD-R and DVD-RW discs in Video Mode. Using the Title List From the T itle List display you can play , name and erase titles. Once a Video mode disc is finalized, the Title List screen changes its appearance and all you can do is select titles to play .
Programming the MultiBrand Remote to Control Y our TV Y ou can program the DVD Recorder+VCR MultiBrand remote control to operate many TV brands and models. 1 1 In the chart below , find the code(s) correspon- ding to your brand of TV . 2 2 While holding down the TV POWER button, enter the 2-digit code number using the 0-9 but- tons.
Language Code List REFERENCE 53 Code Language 6566 Abkhazian 6565 Afar 6570 Afrikaans 8381 Albanian 6577 Amharic 6582 Arabic 7289 Armenian 6583 Assamese 6588 Aymara 6590 Azerbaijani 6665 Bashkir 6985 .
54 Country Code List Code Country AD Andorra AE United Arab Emirates AF Afghanistan AG Antigua and Barbuda AI Anguilla AL Albania AM Armenia AN Netherlands Antilles AO Angola AQ Antarctica AR Argentin.
REFERENCE 55 T roubleshooting Check the following guide for the possible cause of a problem before contacting customer support. Symptom No power . No picture.
56 Symptom Cannot record or did not record successfully . T imer Recording not possi- ble. Stereo Audio Record and/or Playback not pres- ent. Remote control does not work properly . Cause The remaining blank space on the disc is insufficient. The source you are trying to record is copy- protected.
General Power requirements AC 120V , 60 Hz Power consumption 35W Dimensions (approx.) 16.9 x 3.25 x 14.2 inches (430 X 83.5 X 360 mm) (w x h x d) Mass (approx.
58 T echnical Specifications (Continued) Outputs VIDEO OUT 1 Vp-p 75 Ω , sync negative, RCA jack x 1 S-VIDEO OUT (Y) 1.0 V (p-p), 75 Ω , negative sync, Mini DIN 4-pin x 1 (C) 0.286 V (p-p) 75 Ω COMPONENT VIDEO OUT (Y) 1.0 V (p-p), 75 Ω , negative sync, RCA jack x 1 (PROGRESSIVE SCAN) (Pb)/(Pr) 0.
Limited W arranty REFERENCE 59 GoVideo DVD Recorder+VCR Limited W arranty Who Provides the Limited W arranty During the warranty period, the GoVideo W arranty Administrator will honor DVD Recorder+VCR service for 90 days labor , 1 year parts from the original date of con- sumer purchase.
3834RV0002? Printed in Korea.
Ein wichtiger Punkt beim Kauf des Geräts Go-Video VR4940 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Go-Video VR4940 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Go-Video VR4940 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Go-Video VR4940 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Go-Video VR4940 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Go-Video VR4940 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Go-Video VR4940 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Go-Video VR4940. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Go-Video VR4940 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
