Benutzeranleitung / Produktwartung GA-B75M-D3V des Produzenten Gigabyte
Zur Seite of 40
GA-B75M-D3V User's Manual Rev . 1001 12 M E - B 7 5 M D 3 V -1 0 01 R.
Motherboard GA-B75M-D3V Feb. 8, 2012 Feb. 8, 2012 Motherboard GA-B75M-D3V.
Copyright © 2012 GIGA-BYTE TECHNOLOGY CO., L TD. All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE.
- 4 - T able of Contents GA - B75M- D3V Mot herb oard Layout ............................................................................... 5 GA - B75M- D3V Mot herb oard Blo ck Dia gram ...............................................................
- 5 - GA- B7 5M - D3 V Mother board Lay out KB_MS_USB CPU_F AN SYS_F AN LGA1 155 A TX GA-B75M-D3V F_AUDIO AUDIO B_BIOS DDR3_1 DDR3_2 BA T A TX_12V Intel ® B75 SA T A2 SA T A2 R_USB30 CODEC CLR_CMOS F.
- 6 - iTE Super I/O GA- B7 5M - D3 V Mother board Block Diagram PS/2 KB/Mouse LGA1 155 CPU Intel ® B75 PCIe CLK (100 MHz) PCI Express Bus CPU CLK+/- (100 MHz) 1 PCI Express x16 Dual BIOS COM LPT 8 USB 2.
- 7 - Chapter 1 Hardware Installation 1-1 Installation Precautions The motherb oard contains numero us delic ate electronic circu its and compo nents which can become damaged as a result of electrostatic discharge (ESD).
- 8 - 1-2 ProductSpecications CPU Support for Intel ® Core ™ i7 processors/Intel ® Core ™ i5 processors/ Intel ® Core ™ i3 processors/Intel ® Pentium ® processors/Intel ® Celeron ® processors in the LGA1 155 package (Go to GIGABYTE's website for the latest CPU support list.
- 9 - Internal Connectors 1 x 24-pin A TX main power connector 1 x 4-pin A TX 12V power connector 1 x SA T A 6Gb/s connector 5 x SA T A 3Gb/s connectors 1 x CPU fan header 1 x system fan header 1 x front panel header 1 x front panel audio header 1 x USB 3.
- 10 - 1-3 Installing the CPU Installing the CPU A. Locate the alignment keys on the motherboard CPU socket and the notches on the CPU. Bundled Software Norton Internet Security (OEM version) Inte.
- 1 1 - 1-4 Installing the Memory DualChannelMemoryConguration This motherboard provides two DDR3 memory sockets and supports Dual Channel T echnology . After the memory is installed, the BIOS will automatically detect the specications and capacity of the memory .
- 12 - 1-6 Back Panel Connectors USB 2.0/1.1 Port The USB port supports the USB 2.0/1.1 specication. Use this port for USB devices such as a USB keyboard/mouse, USB printer , USB ash drive and etc. PS/2 Keyboard/Mouse Port Use this port to connect a PS/2 mouse or keyboard.
- 13 - 1-7 Internal Connectors Read the following guidelines before connecting external devices: First make sure your devices are compliant with the connectors you wish to connect. • Befor e installin g the devi ces, be sure to turn off the devic es and your compute r .
- 14 - DEBUG PO RT G.QBOFM 13 1 24 12 A TX A TX_12V： 1/2) A TX_12V/A TX (2x2 12V Power Connector and 2x12 Main Power Connector) With the use of the power connec tor , the power supply can supply enough stabl e powe r to all the compone nts on the motherboard.
- 15 - 3/4) CPU_F AN/SYS_FAN (Fan Header s) All fan headers on this motherboard are 4-pin. Most fan headers possess a foolproof insertion design. When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire is the ground wire).
- 16 - 7) SA T A2 1/2/3/4/5 (SA T A 3Gb/s Connectors, Controlled by Intel B75 Chipset) The SA TA connectors conform to SA T A 3Gb/s standard and are compatible with SA T A 1.5Gb/s standard. Each SA T A connector supports a single SA T A device. Pl ea s e co nn e ct t h e L-sh ap e d en d o f t h e S ATA c a b l e t o y o u r S ATA h a r d drive.
- 17 - 8) F_P ANEL (Front Panel Header) Conn ect the powe r switch , reset switch , speake r , chass is intr usion switch/ sensor and system statu s indic ator on the chassis to this header according to the pin assignments below . Note the positive and negative pins before connecting the cables.
- 18 - 9) F_AUDIO (Front Panel Audio Header) The front panel audio header supports Intel High Denition audio (HD) and AC'97 audio. Y ou may connect your chassis front panel audio module to this header . Make sure the wire assignments of the module con- nector match the pin assignments of the motherboard header.
- 19 - 12) F_USB1/F_USB2 (USB 2.0/1.1 Headers) The headers conform to USB 2.0/1.1 specication. Each USB header can provide two USB ports via an optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer . Do not plug the IEEE 1394 bracket (2x5-pin) cable into the USB header .
- 20 - 13) CLR_CMOS (Clear CMOS Jumper) Use this jumper to clear the CMOS values (e.g. date information and BIOS congurations) and reset the CMOS values to factory defaults. T o clear the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds.
- 21 - Chapter 2 BIOS Setup Because BIOS ashing is potentially risky , if you do not encounter problems using the current • version of BIOS, it is recommended that you not ash the BIOS. T o ash the BIOS, do it with caution. Inadequate BIOS ashing may result in system malfunction.
- 22 - 2-2 The Main Menu On the main menu of the BIOS Setup program, press arrow keys to move among the items and press <Enter> to accept or enter a sub-menu.
- 23 - 2-3 M.I.T . Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall system congurations. Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory and reduce the useful life of these components.
- 24 - M.I.T . Current Status ` This screen provides information on CPU/memory frequencies/parameters. Advanced Frequency Settings ` Internal Graphics Clock & Allows you to set the onboard graphics clock. The adjustable range is from 400 MHz to 3200 MHz.
- 25 - (Note) This item is present only when you install a CPU that supports this feature. For more information about Intel CPUs' unique features, please visit Intel's website. CPU Clock Ratio, CPU Frequency & The settings under the two items above are synchronous to those under the same items on the Advanced Frequency Settings menu.
- 26 - ExtremeMemoryProle(X.M.P .) & (Note) Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when enabled. Disabled Disables this function. (Default) Prole1 Uses Prole 1 settings. Prole2 (Note) Uses Prole 2 settings.
- 27 - ProleDDRV oltage & When using a non-XMP memory module or Extreme MemoryProle (X.M.P .) is set to Disabled , this item will display as 1.50V . When ExtremeMemoryProle(X.M.P .) is set to Prole1 or Prole2 , this item will display the value based on the SPD data on the XMP memory .
- 28 - PC Health Status ` Reset Case Open Status & Disabled Keeps or clears the record of previous chassis intrusion status. (Default) Enabled Clears the record of previous chassis intrusion status and the Case Opened eld will show "No" at next boot.
- 29 - Slope PWM & Allows you to control the CPU fan speed. This item is congurable only when CPU Fan Speed Control is set to Manual . Options are: 0.75 PWM value / o C ~ 2.50 PWM value / o C. System Fan Speed Control & Allows you to determine whether to enable the system fan speed control funct ion and adjust the fan speed.
- 30 - System Time & Sets the system time. The time format is hour , minute, and second. For example, 1 p.m. is 13:0:0. Use <Enter> to switch between the Hour , Minute, and Second elds and use the <Page Up> or <Page Down> key to set the desired value.
- 31 - Hard Drive/CD/DVD ROM Drive/Floppy Drive/Network Device BBS Priorities & Species the boot order for a specic device type, such as hard drives, optical drives, oppy disk drives, and devices that support Boot from LAN function, etc.
- 32 - 2-6 Peripherals LAN PXE Boot Option ROM & Allows you to decide whether to activate the boot ROM integrated with the onboard LAN chip. (Default: Disabled) SA T A Controller(s) & Enables or disables the integrated SA T A controllers.
- 33 - AHCI Congures the SA T A controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specication that allows the storage driver to enable advanced Serial A T A features such as Native Command Queuing and hot plug.
- 34 - Init Display First & Specifesthe frstinitiation of themonitor display fromthe installed PCIgraphics card, PCIExpress graphics card,ortheonboardgraphics. Auto LetsBIOSautomaticallycongurethissetting.
- 35 - AC BACK & Determines the state of the system after the return of power from an AC power loss. Memory The system returns to its last known awake state upon the return of the AC power . Always On The system is turned on upon the return of the AC power .
- 36 - Resume by Alarm & Determines whether to power on the system at a desired time. (Default: Disabled) If enabled, set the date and time as following: Wake up day: Turn on the system at a specic time on each day or on a specic day in a month.
- 37 - 2-8 Save & Exit Save & Exit Setup & Press <Enter> on this item and select Yes . This saves the changes to the CMOS and exits the BIOS Setup program. Select No or press <Esc> to return to the BIOS Setup Main Menu. Exit Without Saving & Press <Enter> on this item and select Y es .
- 38 - Chapter 3 Drivers Installation Before installing the drivers, rst install the operating system. • After installing the operating system, insert the motherboard driver disk into your optical drive. The • driver Autorun screen is automatically displayed which looks like that shown in the screen shot below .
- 39 - Regulatory Statements Reg ula to r y No ti ce s This document must not be copied without our written permission, and the contents there of must not be imparted to a third party nor be used for any unauthorized purpose. Contravention will be prosecuted.
- 40 - Contact Us GIGA-BYTE TECHNOLOGY CO., L TD. Address: No.6, Bao Chiang Road, Hsin-Tien Dist., New T aipei City 231,T aiwan TEL: +886-2-8912-4000, F AX: +886-2-8912-4003 T ech. and Non-T ech. Support (Sales/Marketing) : http://ggts.gigabyte.com.tw WEB address (English): http://www .
Ein wichtiger Punkt beim Kauf des Geräts Gigabyte GA-B75M-D3V (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Gigabyte GA-B75M-D3V noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Gigabyte GA-B75M-D3V - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Gigabyte GA-B75M-D3V reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Gigabyte GA-B75M-D3V erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Gigabyte GA-B75M-D3V besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Gigabyte GA-B75M-D3V verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Gigabyte GA-B75M-D3V. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Gigabyte GA-B75M-D3V gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
