Benutzeranleitung / Produktwartung 8S648FXP-RZ des Produzenten Gigabyte
Zur Seite of 40
8S648FXP-RZ / 8S648FXP-RZ-C User's Manual Intel ® Pentium ® 4 Processor Motherboard Rev. 1001 12ME-S648FXPRZ-1001 Copyright © 2004 GIGABYTE TECHNOLOGY CO.
Motherboard 8S648FXP-RZ Nov. 3, 2004 Mother Board 8S648FXP-RZ Nov. 3, 2004.
Preparing Y our Computer Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. T o protect them against damage from static electricity, you should follow some precautions whenever you work on your computer. 1. Unplug your computer when working on the inside.
- 4 - 8S648FXP-RZ Series Motherboard English T able of Contents Chapter 1 Introduction ................................................................................................... 5 Features Summary .............................................
Introduction English - 5 - Chapter 1 Introduction Features Summary Motherboard y 8S648FXP-RZ or 8S648FXP-RZ-C CPU y Socket 478 for Intel ® Pentium ® 4 (Northwood, Prescott) with HT T echnology y Int.
- 6 - 8S648FXP-RZ Series Motherboard English "*" Only for 8S648FXP-RZ. "#" Only for 8S648FXP-RZ-C. 8S648FXP-RZ Series Motherboard Layout KB_MS COMA LPT USB LAN * SOCKET478 CPU_FAN .
Introduction English - 7 - "*" Only for 8S648FXP-RZ. Block Diagram Pentium 4 Socket 478 CPU SiS 648FX AC97 CODEC SiS 964 CPUCLK+/- (100/133/200 MHz) System Bus 400/533/800 MHz DDR 266/333/400 MHz ZCLK (66/133MHz) HCLK+/- (100/133MHz) 66/133 MHz 33 MHz 14.
- 8 - 8S648FXP-RZ Series Motherboard English T o set up your computer, you must complete the following steps: Step 1- Install the Central Processing Unit (CPU) Step 2- Install memory modules Step 3- I.
- 9 - Hardware Installation Process English Step 1-1: CPU Installation Figure 1. Pull the rod to the 90-degree directly. Figure 2. Locate Pin 1 in the socket and look for a (golden) cut edge on the CPU upper corner. Insert the CPU into the socket. (Do not force the CPU into the socket.
- 10 - 8S648FXP-RZ Series Motherboard English Step 2: Install Memory Modules DDR Notch Before installing the memory modules, please comply with the following conditions: 1. Please make sure that the memory used is supported by the motherboard. It is recommended that memory of similar capacity, specifications and brand be used.
- 1 1 - Hardware Installation Process English * Step 4: Install I/O Peripherals Cables Step 4-1: I/O Back Panel Introduction PS/2 Keyboard and PS/2 Mouse connector T o install a PS/2 port keyboard and mouse, plug the mouse to the upper port (green) and the keyboard to the lower port (purple).
- 12 - 8S648FXP-RZ Series Motherboard English Step 4-2: Connectors Introduction LAN port * The provided Internet connection is fast Ethernet, providing data transfer speeds of 10/100Mbps. Line In jack Devices like CD-ROM, walkman etc. can be connected to Line In jack.
- 1 3 - Hardware Installation Process English 1/2) A TX_12V / A TX (Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, please make sure that all components and devices are properly installed.
- 14 - 8S648FXP-RZ Series Motherboard English 6) IDE1 / IDE2 (IDE1 / IDE2 Connector) An IDE device connects to the computer via an IDE connector. One IDE connector can connect to one IDE cable, and the single IDE cable can then connect to two IDE devices (hard drive or optical drive).
- 1 5 - Hardware Installation Process English 8) PWR_LED PWR_LED is connect with the system power indicator to indicate whether the system is on/off. It will blink when the system enters suspend mode. 9) F_P ANEL (2 x 10 pins Connector) Please connect the power LED, PC speaker, reset switch and power switch etc.
- 16 - 8S648FXP-RZ Series Motherboard English 10) F_AUDIO (Front Audio Connector) If you want to use Front Audio connector, you must remove 5-6, 9-10 Jumper.
- 1 7 - Hardware Installation Process English 12) SUR_CEN (Surround Center Connector) Please contact your nearest dealer for optional SUR_CEN cable. 1 5 6 2 13) CD_IN (CD In Connector) Connect CD-ROM or DVD-ROM audio out to the CD_IN connector 1 Pin No.
- 18 - 8S648FXP-RZ Series Motherboard English 16) CLR_CMOS (Clear CMOS) Y ou may clear the CMOS data to its default values by this jumper . T o clear CMOS, temporarily short 1-2 pin. Default doesn't include the "Shunter" to prevent from improper use this jumper.
- 1 9 - BIOS Setup English CONTROL KEYS < >< >< >< > Move to select item <Enter> Select Item <Esc> Main Menu - Quit and not save changes into CMOS Status Page Setup.
- 20 - 8S648FXP-RZ Series Motherboard English • Standard CMOS Features This setup page includes all the items in standard compatible BIOS. • Advanced BIOS Features This setup page includes all the items of Award special enhanced features. • Integrated Peripherals This setup page includes all onboard peripherals.
- 2 1 - BIOS Setup English Standard CMOS Features Date The date format is <week>, <month>, <day>, <year>. Week The week, from Sun to Sat, determined by the BIOS and is display only Month The month, Jan.
- 22 - 8S648FXP-RZ Series Motherboard English Drive A / Drive B The category identifies the types of floppy disk drive A or drive B that has been installed in the computer. None No floppy drive installed 360K, 5.25" 5.25 inch PC-type standard drive; 360K byte capacity.
- 2 3 - BIOS Setup English Advanced BIOS Features Hard Disk Boot Priority Select boot sequence for onboard(or add-on cards) SCSI, RAID, etc. Use < > or < > to select a device, then press<+> to move it up, or <-> to move it down the list.
- 24 - 8S648FXP-RZ Series Motherboard English Password Check System The system can not boot and can not access to Setup page will be denied if the correct password is not entered at the prompt. Setup The system will boot, but access to Setup will be denied if the correct password is not entered at the prompt.
- 2 5 - BIOS Setup English Integrated Peripherals IDE1 Conductor Cable Auto Will be automatically detected by BIOS. (Default value) ATA66/100/133 Set IDE1 Conductor Cable to ATA66/100/133 (Please make sure your IDE device and cable is compatible with ATA66/100/133).
- 26 - 8S648FXP-RZ Series Motherboard English USB Controller Enabled Enable USB Controller. (Default value) Disabled Disable USB Controller. USB Legacy Support When USB keyboard or mouse is installed, please set at Enabled. Enabled Enable USB keyboard or mouse support.
- 2 7 - BIOS Setup English Power Management Setup ACPI Suspend Type S1(POS) Set ACPI suspend type to S1. (Default value) S3(STR) Set ACPI suspend type to S3. Soft-Off by PWR_BTTN O f f The user press the power button once, he can turn off the system. (Default value) Suspend The user press the power button once, then he can enter suspend mode.
- 28 - 8S648FXP-RZ Series Motherboard English Power On by Keyboard Any Key Set keyboard power on by any key. Password Enter from 1 to 8 characters to set the keyboard power on password. Disabled Disabled this function. (Default value) Power On by Mouse Enabled Power on system by move or click the mouse.
- 2 9 - BIOS Setup English PCI 4 IRQ Assignment Auto Auto assign IRQ to PCI 4. (Default value) 3,4,5,7,9,10,11,12,14,15 Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 4. PCI 1/PCI 5 IRQ Assignment Auto Auto assign IRQ to PCI 1/PCI 5. (Default value) 3,4,5,7,9,10,11,12,14,15 Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 1/PCI 5.
- 30 - 8S648FXP-RZ Series Motherboard English PC Health Status Current Voltage (V) Vcore / DDR2.5V / +3.3V / +12V Detect system's voltage status automatically. Current CPU Temperature Detect CPU temperature automatically. Current CPU/SYSTEM FAN Speed (RPM) Detect CPU/SYSTEM Fan speed status automatically.
- 3 1 - BIOS Setup English MB Intelligent Tweaker(M.I.T.) Configure DRAM Timing Auto Configure the DRAM Timing automatically. (Default value) Manual Configure the DRAM Timing manually. CAS Latency Setting Set CAS Latency manually. Options are: 2T, 2.5T, 3T, and Auto.
- 32 - 8S648FXP-RZ Series Motherboard English Top Performance If you wish to maximize the performance of your system, set "Top Performance" as "Enabled". Disabled Disable this function. (Default Value) Enabled Enable Top Performance function.
- 3 3 - BIOS Setup English Load Fail-Safe Defaults CMOS Setup Utility-Copyright (C) 1984-2004 A ward Software ` Sta ndard CMOS Features ` Adva nced BIOS Features ` Integrated Peripherals ` Power Ma nagement Setup ` PnP/PCI Configurations ` PC Health Status ` MB Intelligent T weaker(M.
- 34 - 8S648FXP-RZ Series Motherboard English CMOS Setup Utility-Copyright (C) 1984-2004 A ward Software ` Sta ndard CMOS Features ` Adva nced BIOS Features ` Integrated Peripherals ` Power Ma nagement Setup ` PnP/PCI Configurations ` PC Health Status ` MB Intelligent T weaker(M.
- 3 5 - BIOS Setup English Exit Without Saving Type "Y" will quit the Setup Utility without saving to RTC CMOS. Type "N" will return to Setup Utility.
- 36 - 8S648FXP-RZ Series Motherboard English.
Driver Installation - 37 - English Revision History Chapter 3 Install Drivers Pictures below are shown in Windows XP Insert the driver CD-title that came with your motherboard into your CD-ROM drive, the driver CD- title will auto start and show the installation guide.
- 38 - 8S648FXP-RZ Series Motherboard English SIS AGP Driver AGP interface driver for SiS series chipset. USB Patch for WinXP This patch driver can help you to resolve the USB device wake up S3 hang up issue in XP. SIS Mini IDE Driver SiS IDE controller driver.
Driver Installation - 39 - English Taiwan (Headquarters) GIGA-BYTE TECHNOLOGY CO., L TD. Address: No.6, Bau Chiang Road, Hsin-Tien, T aipei Hsien, T aiwan. TEL: +886 (2) 8912-4888 F AX: +886 (2) 8912-4003 T ech. Support : http://tw .
- 40 - 8S648FXP-RZ Series Motherboard English China NINGBO G.B.T . TECH. TRADING CO., L TD. T ech. Support : http://cn.giga-byte.com/T echSupport/ServiceCenter.htm Non-T ech. Support(Sales/Marketing) : http://ggts.gigabyte.com.tw/nontech.
Ein wichtiger Punkt beim Kauf des Geräts Gigabyte 8S648FXP-RZ (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Gigabyte 8S648FXP-RZ noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Gigabyte 8S648FXP-RZ - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Gigabyte 8S648FXP-RZ reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Gigabyte 8S648FXP-RZ erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Gigabyte 8S648FXP-RZ besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Gigabyte 8S648FXP-RZ verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Gigabyte 8S648FXP-RZ. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Gigabyte 8S648FXP-RZ gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
