Benutzeranleitung / Produktwartung 4635 des Produzenten Gigabyte
Zur Seite of 26
© Copyright September , 2005 This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of Giga-byte T echnology Co.
I FCC Warning This equipment has been tested an d found to comply with the limits f or a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
II General Safety Information • Do not place heavy objects such as books or bags on the unit. • A void placing objects with strong magnets built in too close to the unit. If you suspect stereo speakers may interfere with the unit, try moving the speakers away from the unit.
III Power Safety • Only use the supplied power cord. • Do not place anything on the power cord. Place the power cord where it will not be in the way of foot traffic. • Remove the batteries from the remote control when storing or not in use for a prolonged period.
IV CONTENTS Chapter One Getting Started 1.1 Packing Checklist .................................................................................. 1 1.2 Views of HA91 ......................................................................................
1 1.1 Packing Checklist Carefully unpack the HA91 and check that besides this User Manual the following items are included: Contact your dealer immediately if any items are missing, appear damaged, or if the unit does not work.
2 CHAPTER ONE 1.2 Features at a Glance ►Front View Item Description 1. Power Push the Power Button to turn the HA91 on. 2. IEEE 1394 (4-pin) Connect IEEE1394-enabled devices. 3. USB 2.0 Connect USB-enabled devices. 4. S-Video In Connector for S-Video in.
3 CHAPTER ONE ►Rear View Item Description 1. Power Connect the power cord DC Jack here. 2. MIC-In Connect a microphone here. 3. LINE-Out Connect to speakers or an amplifier . 4. LINE-In Stereo audio input port. 5. SPDIF Digital audio output connector .
4 CHAPTER ONE ►VFD (V acuum Fluorescent Display) Messages The LED display on the front of the HA91 displays status information. As well as disc information, the following messages display in the LED display: Item Description 1 Displays the volume level.
5 ►Normal Windows Mode (Media Center Applications are not run) / Sleep Mode Status: 1. The system is t urn on in normal Windows mode. Media Center applications are not run. 2. System is sleeping. Description: 1. Time is shown. The clock control by VFD MCU.
6 ►My Video Mode Status: When “My Videos” is selected, the screen is on video frame and stop mode. Description: 1. “VIDEO” is shown 2. Run Disk is stop till the media is played. ►My Picture Mode Status: On “My Pictures” frame and stop mode.
7 ►My Music Mode Status: On “My Music” frame and stop mode. Description: 1. “MUSIC” is shown. 2. Run Disk is stop till the media is played. ►TV Mode Status: On “My TV” frame and stop mode. Description: 1. “TV” is shown. 2. Run Disk is stop till the media is played.
8 Status: On TV frame and go to record TV . Description: 1. “REC SHOW” is shown. ►Music / DVD / Video / Play Mode Status: On music, DVD, video frame and play mode Description: 1. When playing the music, it will show the tra ck time on Music frame or Home frame.
9 1.3 Remote Control Functions Item Function Power on/off Stop Recording Button Play Pause Fast Rewind Fast Forward Previous T rack Next T rack Back More Information Direction Keys: Up/ Down Enter Key.
10 ►Inserting the Remote Control Batteries T he b a t t e r y c o m p a r t m e n t is o n t he u n d e r s i d e o f t h e r e m o t e c o nt r o l . R e m o v e t h e batteries when not using the HA91 for a longer period. 1. Only use AA batteries.
11 1.4 Keyboard Function ►Using the trackball and buttons The trackball and buttons have the same functions as a PC mouse. Roll the trackball to move the cursor on the screen, use the left and right buttons as you do a standard mouse.
12 ►Inserting the Keyboard Batteries The battery compartment is on the underside of the keyboard. Remove the batteries when not using the HA91 for a longer period. 1. Lift as shown to remove the cover . 2. Insert two AA batteries taking note of the correct polarity (+/-).
13 ►Set Up for Linkage 1. Remove the cover and check if the batteries have been installed. (Y ou can follow instructions on P .12 Inserting the Keyboard Batteries). 2. Press connect button on the front panel. After pressing the button, its indicator will light (slowly) and waiting for the match signal from RF Keyboard.
14 CHAPTER TWO 2.1 Connecting Input Devices Many of the connectors on the HA91 support the connection of more than one kind of device. For example, USB printers, keyboards, or scanners can be connected to any of the USB ports.
15 CHAPTER TWO 2.2 Connecting a Monitor/ Flat Display Check the connectors on your monitor; many monitors have both a VGA (analog) connector and a DVD-I (digital) connector . If the monitor has both connectors, use the DVI-I connection as digital provides a better quality signal.
16 2.3 Connecting Speakers or an Amplifier There are many options for connecting amplifiers using both analog and digital connections. Analog connections are made using the line-out connector . Digital connections are made using the SPDIF connector .
17 2.4 Setting up a 5.1 Audio Environment The 5.1 channel audio environment is a digital audio playback system for home theater . It includes five channels (left, right, center , rear/surround left and right) plus a subwoofer channel.
18 2.5 Connecting a TV Antenna Before you can watch TV you must connect an antenna or a CA TV cable to the HA91. 1. Connect your VHF/UHF (ant enna) or CA TV cable to the ANT connector on the HA91. 2. Connect the other end of the cable to the antenna or CA TV socket.
19 2.6 Connecting to a LAN T o go online and send or receive email you must have an Internet connection. If you have an existing ADSL account, connect the RJ-45 cable from your ADSL to the LAN connector on the HA91.
20 2.7 Connecting the Power Cable Refer to the following to connect the power cable. 1. Connect the power cable to the power connector on the HA91. 2. Connect the other end to an electrical outlet.
21 APPENDIX A SPECIFICATIONS Board GA-8I865SC CPU PSC Celeron 2.8GHz ( Celeron D 335 ) DRAM 512MB HDD 160G or greater Dimensions 438.2 (W) x 325.8 (D) x 60.
Ein wichtiger Punkt beim Kauf des Geräts Gigabyte 4635 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Gigabyte 4635 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Gigabyte 4635 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Gigabyte 4635 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Gigabyte 4635 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Gigabyte 4635 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Gigabyte 4635 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Gigabyte 4635. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Gigabyte 4635 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
