Benutzeranleitung / Produktwartung GS-2668 DC des Produzenten Genie
Zur Seite of 36
Operator’ s Manual with Maintenance Information Third Edition Third Printing Part No. 82750.
Genie GS-2668 DC and Genie GS-3268 DC Part No. 82750 Operator's Manual Third Edition • Third Printing Copyright © 1999 by Genie Industries First Edition: Sixth Printing, January 2002 Second Ed.
Part No. 82750 Genie GS-2668 DC and Genie GS-3268 DC 1 Operator's Manual Third Edition • Third Printing Safety Rules Danger Failure to obey the instructions and safety rules in this manual will result in death or serious injury .
2 Genie GS-2668 DC and Genie GS-3268 DC Part No. 82750 Operator's Manual Third Edition • Third Printing SAFETY RULES Electrocution Hazards This machine is not electrically insulated and will not provide protection from contact with or proximity to electrical current.
Part No. 82750 Genie GS-2668 DC and Genie GS-3268 DC 3 Operator's Manual Third Edition • Third Printing Do not operate the machine in strong or gusty winds. Do not increase the surface area of the platform or the load. Increasing the area exposed to the wind will decrease machine stability.
4 Genie GS-2668 DC and Genie GS-3268 DC Part No. 82750 Operator's Manual Third Edition • Third Printing SAFETY RULES Do not place loads outside the platform perimeter. Do not use batteries that weigh less than the original equipment. Batteries are used as counterweight and are critical to machine stability.
Part No. 82750 Genie GS-2668 DC and Genie GS-3268 DC 5 Operator's Manual Third Edition • Third Printing SAFETY RULES Collision Hazards Be aware of limited sight distance and blind spots when driving or operating. Be aware of the extended platform position when moving the machine.
6 Genie GS-2668 DC and Genie GS-3268 DC Part No. 82750 Operator's Manual Third Edition • Third Printing SAFETY RULES Explosion and Fire Hazards Do not operate the machine in hazardous locations or locations where potentially flammable or explosive gases or particles may be present.
Part No. 82750 Genie GS-2668 DC and Genie GS-3268 DC 7 Operator's Manual Third Edition • Third Printing Battery Safety Burn Hazards Batteries contain acid. Always wear protective clothing and eye wear when working with batteries. Avoid spilling or contacting battery acid.
8 Genie GS-2668 DC and Genie GS-3268 DC Part No. 82750 Operator's Manual Third Edition • Third Printing Legend 1 Platform entry gate 2 Platform guard rails 3 Lanyard anchorage point 4 Platform .
Part No. 82750 Genie GS-2668 DC and Genie GS-3268 DC 9 Operator's Manual Third Edition • Third Printing Controls Platform Controls 1 Horn button 2 Machine on incline button with indicator light.
10 Genie GS-2668 DC and Genie GS-3268 DC Part No. 82750 Operator's Manual Third Edition • Third Printing CONTROLS Ground Control Panel 1 LED diagnostic readout 2 Hour meter 3 Red Emergency Stop.
Part No. 82750 Genie GS-2668 DC and Genie GS-3268 DC 11 Operator's Manual Third Edition • Third Printing Pre-operation Inspection Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual.
12 Genie GS-2668 DC and Genie GS-3268 DC Part No. 82750 Operator's Manual Third Edition • Third Printing PRE-OPERATION INSPECTION Pre-operation Inspection o Be sure that the operator's, safety and responsibilities manuals are complete, legible and in the storage container located on the platform.
Part No. 82750 Genie GS-2668 DC and Genie GS-3268 DC 13 Operator's Manual Third Edition • Third Printing Observe and Obey: Only routine maintenance items specified in this manual shall be performed by the operator.
14 Genie GS-2668 DC and Genie GS-3268 DC Part No. 82750 Operator's Manual Third Edition • Third Printing Check the Batteries Proper battery condition is essential to good performance and operational safety. Improper fluid levels or damaged cables and connections can result in component damage and hazardous conditions.
Part No. 82750 Genie GS-2668 DC and Genie GS-3268 DC 15 Operator's Manual Third Edition • Third Printing Function T ests Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual.
16 Genie GS-2668 DC and Genie GS-3268 DC Part No. 82750 Operator's Manual Third Edition • Third Printing FUNCTION TESTS 1 0 Push and hold the function enable button and activate the platform down function. Result: The platform should lower. The descent alarm should sound while the platform is lowering.
Part No. 82750 Genie GS-2668 DC and Genie GS-3268 DC 17 Operator's Manual Third Edition • Third Printing FUNCTION TESTS At the Platform Controls Test Emergency Stop 1 7 Push in the platform red Emergency Stop button to the off position. Result: No functions should operate.
18 Genie GS-2668 DC and Genie GS-3268 DC Part No. 82750 Operator's Manual Third Edition • Third Printing FUNCTION TESTS Test the Steering Note: When performing the steer and drive function tests, stand in the platform facing the steer end of the machine.
Part No. 82750 Genie GS-2668 DC and Genie GS-3268 DC 19 Operator's Manual Third Edition • Third Printing FUNCTION TESTS Test Limited Drive Speed 3 5 Press the lift function select button. 3 6 Press and hold the function enable switch on the control handle.
20 Genie GS-2668 DC and Genie GS-3268 DC Part No. 82750 Operator's Manual Third Edition • Third Printing W orkplace Inspection Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual.
Part No. 82750 Genie GS-2668 DC and Genie GS-3268 DC 21 Operator's Manual Third Edition • Third Printing Emergency Stop Push in the red Emergency Stop button to the off position at the ground controls or the platform controls to stop all functions.
22 Genie GS-2668 DC and Genie GS-3268 DC Part No. 82750 Operator's Manual Third Edition • Third Printing Operation From Platform 1 Turn the key switch to platform control. 2 Pull out the ground and platform red Emergency Stop buttons to the on position.
Part No. 82750 Genie GS-2668 DC and Genie GS-3268 DC 23 Operator's Manual Third Edition • Third Printing OPERATING INSTRUCTIONS Drive Select Switch Machine on incline symbol: Low range operation for inclines Error Indicator Light On If the error indicator light is on, push in and pull out the red Emergency Stop button to reset the system.
24 Genie GS-2668 DC and Genie GS-3268 DC Part No. 82750 Operator's Manual Third Edition • Third Printing Battery and Charger Instructions Observe and Obey: Do not use an external charger or booster battery. Charge the battery in a well-ventilated area.
Part No. 82750 Genie GS-2668 DC and Genie GS-3268 DC 25 Operator's Manual Third Edition • Third Printing T ransport and Lifting Instructions Observe and Obey: Common sense and planning must be applied to control the movement of the machine when lifting it with a crane or forklift.
26 Genie GS-2668 DC and Genie GS-3268 DC Part No. 82750 Operator's Manual Third Edition • Third Printing Observe and Obey: Only qualified riggers should rig and lift the machine. Be sure the crane capacity, loading surfaces and straps or lines are sufficient to withstand the machine weight.
Part No. 82750 Genie GS-2668 DC and Genie GS-3268 DC 27 Operator's Manual Third Edition • Third Printing TRANSPORT AND LIFTING INSTRUCTIONS Securing to T ruck or T railer for T ransit Retract and secure the extension deck. Turn the key switch to the off position and remove the key before transporting.
28 Genie GS-2668 DC and Genie GS-3268 DC Part No. 82750 Operator's Manual Third Edition • Third Printing Decals Part No. Description Quantity 25994 Caution - Component Damage 1 28164 Notice - H.
Part No. 82750 Genie GS-2668 DC and Genie GS-3268 DC 29 Operator's Manual Third Edition • Third Printing 62061 or 62062 4991 1 or 52682 62061 or 62062 52673 or 52674 or 52802 or 52803 52966 436.
30 Genie GS-2668 DC and Genie GS-3268 DC Part No. 82750 Operator's Manual Third Edition • Third Printing Inspection for Decals with Symbols Determine whether the decals on your machine have words or symbols. Use the appropriate inspection to verify that all decals are legible and in place.
Part No. 82750 Genie GS-2668 DC and Genie GS-3268 DC 31 Operator's Manual Third Edition • Third Printing 62061 or 62062 82751 or 82752 62061 or 62062 82753 52966 82476 82924 97719 82476 52966 8.
32 Genie GS-2668 DC and Genie GS-3268 DC Part No. 82750 Operator's Manual Third Edition • Third Printing Specifications Model GS-2668 DC Height, working maximum 32 ft 9.9 m Height, platform maximum 26 ft 7.9 m Height, stowed maximum 92 in 2.34 m Rails up Height, stowed maximum 64 1 / 2 in 1.
Part No. 82750 Genie GS-2668 DC and Genie GS-3268 DC 33 Operator's Manual Third Edition • Third Printing SPECIFICATIONS Model GS-3268 DC Height, working maximum 38 ft 11.8 m Height, platform maximum 32 ft 9.8 m Height, stowed maximum 97 in 2.46 m Rails up Height, stowed maximum 69 1 / 2 in 1.
Distributed By: Genie North America Phone 425.881.1800 Toll Free USA and Canada 800.536.1800 Fax 425.883.3475 Genie Australia Pty Ltd. Phone + 61 7 3375 1660 Fax + 61 7 3375 1002 Genie China Phone + 8.
Ein wichtiger Punkt beim Kauf des Geräts Genie GS-2668 DC (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Genie GS-2668 DC noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Genie GS-2668 DC - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Genie GS-2668 DC reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Genie GS-2668 DC erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Genie GS-2668 DC besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Genie GS-2668 DC verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Genie GS-2668 DC. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Genie GS-2668 DC gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
