Benutzeranleitung / Produktwartung DPL-35S des Produzenten Genie
Zur Seite of 31
Operator’ s Manual Second Edition First Printing Part No. 82799 with Maintenance Information.
Genie DPL Super Series Part No. 82799 Operator’s Manual Second Edition • First Printing Important Read, understand and obey these safety rules and operating instructions before operating this machine. Only trained and authorized personnel shall be permitted to operate this machine.
Part No. 82799 Genie DPL Super Series 1 Operator’s Manual Second Edition • First Printing Safety Rules Danger Failure to obey the instructions and safety rules in this manual will cause death or serious injury . Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual.
2 Genie DPL Super Series Part No. 82799 Operator’s Manual Second Edition • First Printing Tip-over Hazards Do not raise the platform unless the base is level, all four outriggers are properly set up and the leveling jacks firmly contact the ground.
Part No. 82799 Genie DPL Super Series 3 Operator’s Manual Second Edition • First Printing Maximum capacity - DPL-35S ANSI and CE 600 lbs 272 kg CSA 500 lbs 227 kg Maximum occupants 2 Do not operate the machine near drop-offs, holes, bumps, debris, unstable or slippery surfaces or other possible hazardous conditions.
4 Genie DPL Super Series Part No. 82799 Operator’s Manual Second Edition • First Printing SAFETY RULES Electrocution Hazards This machine is not electrically insulated and will not provide protection from contact with or proximity to electrical current.
Part No. 82799 Genie DPL Super Series 5 Operator’s Manual Second Edition • First Printing SAFETY RULES Improper Use Hazard Do not leave the machine unattended unless the key is removed to secure from unauthorized use. Damaged Machine Hazards Do not use a damaged or malfunctioning machine.
6 Genie DPL Super Series Part No. 82799 Operator’s Manual Second Edition • First Printing Battery and Charger Safety - DC Models Burn Hazards Batteries contain acid. Always wear protective clothing and eye wear when working with batteries. Avoid spilling or contacting battery acid.
Part No. 82799 Genie DPL Super Series 7 Operator’s Manual Second Edition • First Printing Controls Ground Controls Platform Controls 1 8 9 3 4 7 6 5 1 2 1 Red Emergency Stop button 2 Key switch 3 .
8 Genie DPL Super Series Part No. 82799 Operator’s Manual Second Edition • First Printing 1 Platform end guard rail 2 Platform side guard rail 3 Manual storage container 4 Platform controls 5 AC o.
Part No. 82799 Genie DPL Super Series 9 Operator’s Manual Second Edition • First Printing Pre-operation Inspection Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator’s manual. 1 Avoid hazardous situations.
10 Genie DPL Super Series Part No. 82799 Operator’s Manual Second Edition • First Printing Pre-operation Inspection o Be sure that the operator’s, safety and responsibilities manuals are complete, legible and in the storage container located in the platform.
Part No. 82799 Genie DPL Super Series 11 Operator’s Manual Second Edition • First Printing Maintenance Observe and Obey: Only routine maintenance items specified in this manual shall be performed by the operator.
12 Genie DPL Super Series Part No. 82799 Operator’s Manual Second Edition • First Printing MAINTENANCE Check the Hydraulic Oil Level - AC and DC Models Maintaining the hydraulic oil at the proper level is essential to machine operation. Improper hydraulic oil levels can damage hydraulic components.
Part No. 82799 Genie DPL Super Series 13 Operator’s Manual Second Edition • First Printing MAINTENANCE Scheduled Maintenance Maintenance performed quarterly, annually and every two years must be c.
14 Genie DPL Super Series Part No. 82799 Operator’s Manual Second Edition • First Printing Fundamentals The function tests are designed to discover any malfunctions before the machine is put into service. The operator must follow the step-by-step instructions to test all machine functions.
Part No. 82799 Genie DPL Super Series 15 Operator’s Manual Second Edition • First Printing FUNCTION TESTS 6 Be sure that all four interlock display lights at the ground controls are on. 7 Use the bubble level and adjust the leveling jacks until the machine base is level.
16 Genie DPL Super Series Part No. 82799 Operator’s Manual Second Edition • First Printing FUNCTION TESTS Test Outrigger Interlock 1 7 Twist to release the red Emergency Stop button at the platform controls. 1 8 Push and hold the control activate button and rotate the up/down switch in the direction of intended travel.
Part No. 82799 Genie DPL Super Series 17 Operator’s Manual Second Edition • First Printing Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator’s manual. 1 Avoid hazardous situations. 2 Always perform a pre-operation inspection.
18 Genie DPL Super Series Part No. 82799 Operator’s Manual Second Edition • First Printing Operating Instructions Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator’s manual. 1 Avoid hazardous situations.
Part No. 82799 Genie DPL Super Series 19 Operator’s Manual Second Edition • First Printing Setup 1 Position the machine directly below the desired work area. 2 Connect to an appropriate power source: DC models: Connect the battery pack. AC models: Connect to a grounded 15A AC power supply.
20 Genie DPL Super Series Part No. 82799 Operator’s Manual Second Edition • First Printing OPERATING INSTRUCTIONS Manual Lowering 1 Activate the manual lowering lever. Auxiliary Platform Lowering - AC & DC Models 1 Turn the key switch to ground control.
Part No. 82799 Genie DPL Super Series 21 Operator’s Manual Second Edition • First Printing OPERATING INSTRUCTIONS Battery and Charger Instructions Observe and Obey: Do not use an external charger or booster battery. Charge the battery in a well-ventilated area.
22 Genie DPL Super Series Part No. 82799 Operator’s Manual Second Edition • First Printing T ransport and Lifting Instructions Observe and Obey: Common sense and planning must be applied to control the movement of the machine when lifting it with a crane or forklift.
Part No. 82799 Genie DPL Super Series 23 Operator’s Manual Second Edition • First Printing Observe and Obey: Only qualified riggers should rig and lift the machine. Be sure the crane capacity, loading surfaces and straps or lines are sufficient to withstand the machine weight.
24 Genie DPL Super Series Part No. 82799 Operator’s Manual Second Edition • First Printing Decals Part No . Description Quantity 27857 Caution - Component Damage 1 27865 Label - Bubble Level 2 278.
Part No. 82799 Genie DPL Super Series 25 Operator’s Manual Second Edition • First Printing DECALS.
26 Genie DPL Super Series Part No. 82799 Operator’s Manual Second Edition • First Printing Inspection for Decals with Symbols Determine whether the decals on your machine have words or symbols. Use the appropriate inspection to verify that all decals are legible and in place.
Part No. 82799 Genie DPL Super Series 27 Operator’s Manual Second Edition • First Printing DECALS.
28 Genie DPL Super Series Part No. 82799 Operator’s Manual Second Edition • First Printing Specifications Model DPL-25S DPL-30S DPL-35S Height, 31 ft 4 in 36 ft 40 ft 9 in maximum working 9.5 m 11 m 12.4 m Height, 25 ft 4 in 30 ft 34 ft 9 in maximum platform 7.
Genie North America Phone 425.881.1800 Toll Free USA and Canada 800.536.1800 Fax 425.883.3475 Genie Australia Pty Ltd. Phone + 61 7 3375 1660 Fax + 61 7 3375 1002 Genie China Phone + 86 21 53852570 Fa.
Ein wichtiger Punkt beim Kauf des Geräts Genie DPL-35S (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Genie DPL-35S noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Genie DPL-35S - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Genie DPL-35S reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Genie DPL-35S erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Genie DPL-35S besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Genie DPL-35S verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Genie DPL-35S. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Genie DPL-35S gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
