Benutzeranleitung / Produktwartung 97550 des Produzenten Genie
Zur Seite of 27
Operator’ s Manual Third Edition Second Printing Part No. 97550.
Genie Superlift Advantage P ar t No. 97550 Operator's Manual Third Edition • Second Printing Copyright © 1994 by Genie Industries First Edition: Third Printing, June 1994 Second Edition: Sixth.
P ar t No. 97550 Genie Superlift Advantage 1 Operator's Manual Third Edition • Second Printing Safety Rules W arning F ailure to obey the instructions and saf ety r ules in this manual ma y result in death or ser ious injur y .
2 Genie Superlift Advantage P ar t No . 97550 Operator's Manual Third Edition • Second Printing Fall Hazards Do not use the machine as a personnel lifting platform or step. Do not stand on the load handling attachments. Do not climb on the mast.
P ar t No. 97550 Genie Superlift Advantage 3 Operator's Manual Third Edition • Second Printing SAFETY RULES Electrocution Hazards This machine is not electrically insulated and will not provide protection from contact with or proximity to electrical current.
4 Genie Superlift Advantage P ar t No . 97550 Operator's Manual Third Edition • Second Printing SAFETY RULES Crushing Hazards Do not raise if the load is not properly centered on the load handling attachment. Do not raise unless the load is properly secured to the load handling attachment.
P ar t No. 97550 Genie Superlift Advantage 5 Operator's Manual Third Edition • Second Printing SAFETY RULES Damaged Machine Hazards Do not use a damaged or malfunctioning machine. Do not use a machine with a worn, frayed, kinked or damaged cable.
6 Genie Superlift Advantage P ar t No . 97550 Operator's Manual Third Edition • Second Printing Legend 1 2 3 4 11 14 12 15 17 18 19 8 3 4 1 Winch 2 Cable 3 Mast 4 Carriage 5 Adjustable arm 6 Tr.
P ar t No. 97550 Genie Superlift Advantage 7 Operator's Manual Third Edition • Second Printing LEGEND Standard Forks Adjustable Forks 20 20 17 17 24 21 17 Boom Flat Forks 20 17 22 20 23 1 8 Mas.
8 Genie Superlift Advantage P ar t No . 97550 Operator's Manual Third Edition • Second Printing Pre-operation Inspection Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual.
P ar t No. 97550 Genie Superlift Advantage 9 Operator's Manual Third Edition • Second Printing PRE-OPERATION INSPECTION Pre-operation Inspection R Be sure that the operator’s manual is complete, legible and in the storage container located on the machine.
10 Genie Superlift Advantage P ar t No. 97550 Operator's Manual Third Edition • Second Printing Function T ests Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual. 1 Avoid hazardous situations.
P ar t No. 97550 Genie Superlift Advantage 11 Operator's Manual Third Edition • Second Printing Function T ests 1 Select a test area that is firm, level and free of obstructions. Setup Machines Without Stabilizers 1 Remove the leg retainer pin and lower the leg to the down position.
12 Genie Superlift Advantage P ar t No. 97550 Operator's Manual Third Edition • Second Printing FUNCTION TESTS Flat Forks 1 Place the fork mounting bracket inside the carriage. 2 Insert the retaining pin. 3 Adjust the forks to the desired width and be sure the snap pin is properly inserted in each fork.
P ar t No. 97550 Genie Superlift Advantage 13 Operator's Manual Third Edition • Second Printing FUNCTION TESTS Test Two-Speed Winch Operation 1 Install a load handling attachment. 2 Shift the winch to the slow speed. 3 Raise the carriage by firmly grasping the winch handles and rotating them towards the mast.
14 Genie Superlift Advantage P ar t No. 97550 Operator's Manual Third Edition • Second Printing W orkplace Inspection Fundamentals The workplace inspection helps the operator determine if the workplace is suitable for safe machine operation. It should be performed by the operator prior to moving the machine to the workplace.
P ar t No. 97550 Genie Superlift Advantage 15 Operator's Manual Third Edition • Second Printing Operating Instructions Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual.
16 Genie Superlift Advantage P ar t No. 97550 Operator's Manual Third Edition • Second Printing OPERATING INSTRUCTIONS Moving Machine with a Load It is best to move the machine on the worksite with no load. Moving a raised load should be restricted to positioning for loading and unloading.
P ar t No. 97550 Genie Superlift Advantage 17 Operator's Manual Third Edition • Second Printing Load Capacity Char ts Observe and Obey: Failure to properly position the load may result in death or serious injury. Verify that the load you wish to raise does not exceed the maximum load for your load center.
18 Genie Superlift Advantage P ar t No. 97550 Operator's Manual Third Edition • Second Printing LOAD CAPACITY CHARTS Boom Load P ositioning Instructions 1 Determine the weight of the load and the location of its load center. 2 Refer to the chart below to determine if the machine is capable of lifting the weight at the location on the boom.
P ar t No. 97550 Genie Superlift Advantage 19 Operator's Manual Third Edition • Second Printing T ranspor t and Lifting Instructions Observe and Obey: The transport vehicle must be parked on a level surface. The transport vehicle must be secured to prevent rolling while the machine is being loaded.
20 Genie Superlift Advantage P ar t No. 97550 Operator's Manual Third Edition • Second Printing Decals Part No. Description Quantity 31072 Label - Operator's Manual Container 1 32686 Warni.
P ar t No. 97550 Genie Superlift Advantage 21 Operator's Manual Third Edition • Second Printing DECALS.
22 Genie Superlift Advantage P ar t No. 97550 Operator's Manual Third Edition • Second Printing Part No. Description Quantity 32689 Cosmetic - SLA-5 2 32690 Cosmetic - SLA-10 2 32691 Cosmetic -.
P ar t No. 97550 Genie Superlift Advantage 23 Operator's Manual Third Edition • Second Printing DECALS.
24 Genie Superlift Advantage P ar t No. 97550 Operator's Manual Third Edition • Second Printing Model SLA-5 SLA-10 SLA-15 SLA-20 SLA-25 Height-Stowed 78 1 / 2 in 78 1 / 2 in 78 1 / 2 in 78 1 / .
P ar t No. 97550 Genie Superlift Advantage 25 Operator's Manual Third Edition • Second Printing SPECIFICATIONS Dim ensio ns SLA-5 SLA-10 SLA-15 SLA-20 SLA-25 Standard Forks forks down 4 ft 10 1 / 2 in 9 ft 9 in 14 ft 7 1 / 2 in 19 ft 6 in 24 ft 4 in 1.
Ein wichtiger Punkt beim Kauf des Geräts Genie 97550 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Genie 97550 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Genie 97550 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Genie 97550 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Genie 97550 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Genie 97550 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Genie 97550 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Genie 97550. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Genie 97550 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
