Benutzeranleitung / Produktwartung 28821xx4 des Produzenten GE
Zur Seite of 68
.
Y our telephone equipment is approved for connection to the Public Switched T elephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the T echnical Requirements for T elephone T erminal Equipment published by ACT A .
.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device .
5 This telephone system meets FCC standards for Hearing Aid Compatibility.
6 .
7 Set Day/Time 0 Equalizer 1 Area Code 1 T one/Pulse 1 Registration De-Registration Global De-registration Default Setting .
8 Screening Calls fr om the Handset 8 Accessing the Answering System from Another Location 9 Memory Full 9 .
9 .
10 For there will be additional handset , charge cradle, belt clip, battery pack and cover than shown above.
11 Y our cordless phone uses a digital security system to pr otect against false ringing, unauthorized access, and charges to your phone line.
1 6 .
1 5 6 .
1 .
15 1. Choose an area near an electrical outlet and a telephone wall jack (RJ11C), and place your cordless telephone on a lev el surface, such as a desktop or tabletop, or you may mount it on the wall.
16 This section shows you how to set up your answ ering system to receive incoming calls. Before you begin the set up pr ocess, you must turn on the answering system. • Press the ans on/off button to turn the answering system on and off .
17 1. Press the CALLER ID-V OLUME ( 5 or 6 ) button to scr oll to PROMPT L ANG . . Press the mute/menu OK button to enter the menu.
18 This feature sets your answ ering system to give an alert tone every 10 seconds when there ar e new messages. 1. Press the CALLER ID-V OLUME ( 5 or 6 ) button to scr oll to the MESSAGE ALER T sub-menu.
19 If you need additional assistance, press the repeat button in standby mode and follow the voice instructions.
0 GOOG-11 is Google’s new 11 service. W ith GOOG-11, you can nd local business information completely free, dir ectly from your phone. With purchasing the GE phone, you can access 1-800-GOOG-11 service at anytime by simply pressing the GOOG-11 button.
1 The ha nds et dis pla ys the ha nds et num ber an d u ser na me. The system uses a menu structure to give you access to all of the built -in features.
1. Make sure the phone is (not in T ALK mode). . Press the mute/menu OK button to go to the main menu. . Press CALLER ID-VOL UME ( 6 or 5 ) button to scroll to PHONEBOOK . . Press mute/menu OK button to enter menu.
1. Make sure the phone is (not in T ALK mode). . Press the mute/menu OK button to go to the main menu. . Press CALLER ID-VOL UME ( 6 or 5 ) button to scroll to PHONEBOOK . . Press mute/menu OK button to enter menu.
1. Make sure the phone is (not in T ALK mode). . Press the mute/menu OK button to go to the main menu. . Press CALLER ID-VOL UME ( 6 or 5 ) button to scroll to PHONEBOOK .
5 6. The receiving handset will turn on the microphone and the originating handset will turn on the speakerphone to monitor sound from the r eceiving handset .
6 8. Press the mute/menu OK button to conrm and advance Set Cycle Time sub-menu. 9. Use the CALLER ID-VOL UME ( 6 or 5 ) button to select Once or Daily . The default setting is Once . 10. Press the mute/menu OK button to save your selection. Y ou will hear a conrmation tone.
7 1 . P re s s t h e CALLER ID-VOL UME ( 6 or 5 ) button to scroll to the HANDSET NAME sub-m e nu . . Press mute/menu OK button to enter the menu.
8 1 . P r es s t h e CALLER ID-VOLUME ( 6 or 5 ) b u t t o n t o s cr o l l to t h e RINGER V OLUME sub-m e nu . . Press mute/menu OK button to enter the menu.
9 1. Press the CALLER ID-V OLUME ( 6 or 5 ) button to scr oll to VIP MELOD Y sub-m e n u. . Press mute/menu OK button to select VIP melody featur e and then display VIP 1 recor d.
0 1. Press the mute/menu OK button to enter to VIP MEL ODY menu.
1 6. Press the mute/menu OK button to save y our selection. Y ou will hear a conrmation tone and the current time shows in the display. This feature lets you to adjust the audio quality. 1.
. Press the mute/menu OK button to conrm. Y ou will hear a conrmation tone and your selection shows in the display. Y our packaged handset(s) are pr e-registered and r eady to use. It is not recommended that a handset be register ed again unless absolutely necessary.
. Use the touch-tone pad to select 1 for or for . Or use the CALLER ID-VOL UME ( 6 or 5 ) button to scroll to 1YES or 2NO .
As you become familiar with this system, you may pr efer to use the system’s original settings. Follow the steps below to return to the factory default settings. 1 .
5 .
6 1 . When the phone rings, press the SPEAKER button on the handset . - OR - Pick up the handset and press the T ALK button.
7 If you su bsc rib e t o t he com bin ed Cal l W ait ing Ca lle r I D s erv ice fr om you r l oca l tel eph one co mpa ny, yo u w ill re cei ve Cal ler ID in for mat ion (i f a vai lab le) on Ca ll Wai tin g cal ls.
8 The page feature helps you locate a misplaced handset . To send and r eceive pages, all handsets must be register ed. If your handset is not register ed, follow the instructions in the Registration section of this manual.
9 .
0 . Wait fo r t he per son at th e r ece ivi ng han dse t t o p res s t he delete/intercom/conf button. .
1 1. During an external call, press the delete/intercom/conf button, and use the touch-tone pad to enter the handset number you want to call.
. When the receiving handset connects, press the T ALK or SPE AKER button on the originating handset to transfer the call. -OR- . Press the T ALK or SPE AKER button on the originating handset to transfer the call. If the receiving handset does not answer within 0 seconds, the originating handset rings back and displays CALLBACK .
When you receiv e a call, the Caller ID information is transmitted between the rst and second ring. The Caller ID information appears on the display while the phone rings, giving you a chance to monitor the information and decide whether or not to answer the call.
Available formats include: Number of digits Explanation Example Eleven digits long distance code “1 ” 1-17-888-8888 +-digit area code +7-digit telephone number . T en digits -digit area code + 17-888-8888 7-digit telephone number .
5 1. Make sure the phone is (not in T ALK mode). . Use the CALLER ID-VOLUME ( 6 or 5 ) button to display any Caller ID r ecord. . Press and hold the delete/intercom/conf button until DELETE ALL ? shows in the display.
6 .
7 When the answering system memory is full, the system answers after 10 rings. Y ou should erase some messages so the answering system may recor d new messages.
8 Y ou may access the answering system with the cordless handset or fr om any tone- dial compatible telephone. Use the corresponding handset keys just like y ou would use the base buttons (see “ Answering System Setup”).
9 Y ou can access your answering syst.
50 1 . T o attach the belt clip, insert the sides of the belt clip into the slots on each side of the handset .
51 • Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type, toxic materials could be released which can cause injury.
5 Unde r VIP melody featu re, if the desir ed number / rec ord was selec ted in any o ne of TEN VI P melo dy rec ord s befo re, DUPLI CA TE NUM BER sh ows in the displa y. Indicates that there is no additional information in CID memory.
5 XX represents the number of new CID recor ds not reviewed. Indicates there are no CID recor ds in memory. Indicates the memory location contains no user memories and the user is trying to mark a specic user recor d for VIP MELODY .
5 Signal Meaning A long warbling tone Signals an incoming call (with ringer on) Three short beeps Page signal (several times) One bee.
55 Y ou experience static, noise, or fading in and out • The handset may be out of range of the base. Move closer to base. • Make sure base is not plugged into an electrical outlet with another household appliance. If necessary, relocate the base.
56 If you experience any of the following problems, ev en after rechar ging the battery, you may need to replace the battery pack: • Short talk ti.
57 • Aluminum siding. • Foil backing on insulation. • Heating ducts and other metal construction that can shield radio signals. • Y ou ’re too close to appliances such as micr owaves, stoves, computers, etc.
58 If trouble is experienced with this equipment , for warranty information, please contact customer service at .
59 • Defects in materials or workmanship. • One year , from date of purchase.
60 • Products pur chased or serviced outside the US A . • Acts of nature, such as but not limited to lightning damage. • Please complete and mail the Product Registration Car d packed with your unit .
61 .
6 Accessing the Answering System from Another Location 9 Accessory Information 61 Add Records Advanced Intercom Featur es 0 Answerer 16 Answerer 5 Answering Call.
6 Edit Records Equalizer 1 Equipment Approval Information Erasing Messages 7 Exit 7 FCC RF Radiation Exposure Statement 5 Flash/Call Waiting 7 Gen.
6 Making a Call 5 Making an Intercom Call 9 Memory Full 7 Memory Full 9 Message Alert 18 Message Counter Indicator 5 Message Playback 6 Mute 9 Page 8.
65 Screening Calls fr om the Base 6 Screening Calls fr om the Handset 8 Security Code 18 Set Alarm Clock 5 Set Day/Time 0 Set Prompt Language 17 Speaker Volume 18 Speakerphone Operation.
66.
67.
Model 881 0007 (Rev 1 Dom E) 08-10 Printed in China 101 W . 10r d Street Indianapolis, IN 690-110 © 008 Thomson Inc.
Ein wichtiger Punkt beim Kauf des Geräts GE 28821xx4 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie GE 28821xx4 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für GE 28821xx4 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von GE 28821xx4 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über GE 28821xx4 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon GE 28821xx4 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von GE 28821xx4 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit GE 28821xx4. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei GE 28821xx4 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
