Benutzeranleitung / Produktwartung 2300 V des Produzenten GE
Zur Seite of 266
g GE Indus tr ial Sys te ms GEH- 6385 ACM VAC2-G Innovation Series ™ Medium Voltage – GP Ty pe G D rives Ref erence and Troubleshooting 2300 V Drives.
.
g GE Indus tr ial Sys te ms P u bl i ca ti on : GEH- 6385 Issu ed : 2000-06-29 ACM VAC2-G Innovation Series ™ Medium Voltage – GP Ty pe G D rives Ref erence and Troubleshooting 2300 V Drives.
© 2000 Ge n e ra l El e ctric Com pany , USA . A ll ri g ht s re se rv e d. P r i nt ed in t he Uni t ed S t a t es of Amer i ca . T hese ins tr uc t ions do not p ur p or t to c over a ll det a ils .
GEH-6385 R eference and Trou bleshoo ting, 2300 V Drives Safety Sy mbo l Legend • • • • a Safety Symbol Legen d In dicates a p roced ure, con ditio n, o r st atem ent that, if n ot st rict ly o bs erved , co u ld resu lt in p erso nal in ju ry o r d eath .
b • • • • S afety Sy mbo l Legend Inno vat ion Series Medium Vo ltage G P – T ype G Drives G EH-6385 Th is eq u ipm ent co nta ins a p o ten tial ha zard of elec tric sho ck or burn.
GEH-6385 Re ference and T roub leshooting, 2300 V D rives Co ntents • • • • i Contents Chapter 1 Overv iew 1-1 Int rod uc tion ....................................................................................................................
ii • • • • C onten t s Inno vat ion Series Medium Vo ltage G P Typ e – G Drives GEH-638 5 L AN Sig n al M ap.......................................................................................................3-3 8 Mo to r Co n t rol Fu n c tio n s .
GEH-6385 Re ference and T roub leshooting, 2300 V D rives Co ntents • • • • iii Ch apter 4 Wizar ds 4-1 Int rod uc tion ...................................................................................................................... 4-1 Ce ll Tes t Wi za rd .
iv • • • • C ontents Inno vat ion Series Medium Vo ltage G P Typ e – G Drives GEH-638 5 Driv e Co mm iss io n i ng: Cu rre nt L imi ts .......................................................................4-27 Driv e Co mm iss ioni ng: Po we r Dip R ide- T hro ug h .
GEH-6385 Re ference and T roub leshooting, 2300 V D rives Co ntents • • • • v Chapter 5 Sign al Mapping 5-1 Int rod uc tion ...................................................................................................................... 5-1 L AN Inte rfac es .
.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 1 Overview • • • • 1- 1 Ch apter 1 O verview Introduction This do cument prov ides refe r e n ce an d troub l es hoo ting info r mation f or t h e 2300 V mo de l of th e I nnov atio n Se r ie s™ Me diu m Vo ltag e – GP Ty p e G dr iv es.
1-2 • • • • C hap ter 1 O ve rview Inno vat ion Series Mediu m Vol tage G P Typ e - G Drives G E H-6385 Using Toolbox H elp for Referenc e and Troubl eshooting GE docu ment GEH-6401 describes toolbox features and us e.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 1 Overview • • • • 1- 3 Related Documents If nee ded f or suppleme n ta r y i nfo r matio n, refe r to the f o llowing do cum.
1-4 • • • • C hap ter 1 O ve rview Inno vat ion Series Mediu m Vol tage G P Typ e - G Drives G E H-6385 Notes.
GEH-6385 Re fer en ce and Tro ubleshooting, 2300 V D rives Chap ter 2 Fau lts and Tro ubl eshooting • • • • 2- 1 Chapter 2 Fault s and Troubleshooti ng Introduction Fo r in form ation on usin g the keypad refer to the drive User's Gu ide, GEH- 6382.
2-2 • • • • C hap ter 2 Fau lts and Troub le s hoo ting Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Types of Faults Th er e are cur r e n tl y t wo t ypes of fau lt con .
GEH-6385 Re fer en ce and Tro ubleshooting, 2300 V D rives Chap ter 2 Fau lts and Tro ubl eshooting • • • • 2- 3 Fault Descriptio ns Note Whe n t rou b les h o oting lead s to a ha r dw are i nspe ctio n o r co mpo nent r epla cem en t, be sur e t o fo l lo w the pr ocedu r es des cr ibed in th e d r i ve User’s Guide, GEH-6382 .
2-4 • • • • C hap ter 2 Fau lts and Troub le s hoo ting Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 No. Name T ype Descrip tion 3 Cont fail ed to cl ose Tri p The Cont f.
GEH-6385 Re fer en ce and Tro ubleshooting, 2300 V D rives Chap ter 2 Fau lts and Tro ubl eshooting • • • • 2- 5 No. Name T ype Descrip tion 10 Run cmd w hi gh fl ux Ala rm The Run cmd w hi gh.
2-6 • • • • C hap ter 2 Fau lts and Troub le s hoo ting Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 No. Name T ype Descrip tion 16 Ill ega l r eq for xfer Ala rm The Ill ega l r eq for xfer ala rm oc cu r s wh en a m ot or tr an sf er c om m and i s i s sued and a t ri p f au lt is pre s e nt in the d r ive.
GEH-6385 Re fer en ce and Tro ubleshooting, 2300 V D rives Chap ter 2 Fau lts and Tro ubl eshooting • • • • 2- 7 No. Name T ype Descrip tion 24 Pow e r dip Tri p The Pow er dip t ri p f aul t .
2-8 • • • • C hap ter 2 Fau lts and Troub le s hoo ting Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 No. Name T ype Descrip tion 31 Tach l oss alarm Al arm The Tach l oss.
GEH-6385 Re fer en ce and Tro ubleshooting, 2300 V D rives Chap ter 2 Fau lts and Tro ubl eshooting • • • • 2- 9 No. Name T ype Descrip tion 36 BIC M card clock fai l Tri p The BICM ca rd cl ock fail trip f aul t oc cu rs wh e n FP GA log ic on the BICM cannot de t e ct the p resence of eit he r one of its c l ock signa ls.
2-10 • • • • C hapter 2 Fau lts and Trou ble s hooting Inno vation Series Mediu m Vo lt age GP Typ e - G Drives GEH-6385 No. Name T ype Descrip tion 42 DC bus under vol tage Tri p The DC bus unde r v ol tage trip fau lt occur s whe n the DC link v oltage fee dback ( v ari a bl e DC b us vol tage ) is too low .
GEH-6385 Re fer en ce and Tro ubleshooting, 2300 V D rives Chap ter 2 Fau lts and Tro ubl eshooting • • • • 2- 1 1 No. Name T ype Descrip tion 46 X stop Tri p The X s top trip faul t occu rs whe n the X stop cir cu it is open and when X stop is c on fi g ur ed as a tr i p f aul t .
2-12 • • • • C hapter 2 Fau lts and Trou ble s hooting Inno vation Series Mediu m Vo lt age GP Typ e - G Drives GEH-6385 No. Name T ype Descrip tion 50 HtSink DS t emp lo w Tri p The HtSi nk DS temp l ow tr ip fa ul t oc cu rs w he n th e dio de sou rce he ats ink t em per a t ur e ( v ari a bl e DS he a t si nk te mp ) is too low .
GEH-6385 Re fer en ce and Tro ubleshooting, 2300 V D rives Chap ter 2 Fau lts and Tro ubl eshooting • • • • 2- 1 3 No. Name T ype Descrip tion 57 DB resi st o r ho t Ala rm The DB resi stor ho.
2-14 • • • • C hapter 2 Fau lts and Trou ble s hooting Inno vation Series Mediu m Vo lt age GP Typ e - G Drives GEH-6385 No. Name T ype Descrip tion 68 HtSink C ov er te mp Tri p The Ht Sink C over temp trip fault occ urs whe n heatsink C t e m pe rat u re ( v ari a bl e H ea t si nk C tem p ) is too h i gh.
GEH-6385 Re fer en ce and Tro ubleshooting, 2300 V D rives Chap ter 2 Fau lts and Tro ubl eshooting • • • • 2- 1 5 No. Name T ype Descrip tion 77 HtSi nk DS ri se high Al arm The HtSi nk DS ri.
2-16 • • • • C hapter 2 Fau lts and Trou ble s hooting Inno vation Series Mediu m Vo lt age GP Typ e - G Drives GEH-6385 No. Name T ype Descrip tion 85 Fl ux req whi l e flt Ala rm The Fl ux r eq whi le fl t al arm occurs whe n a flux co mmand is i ssue d a nd a t rip f aul t i s pr es en t in th e d ri v e.
GEH-6385 Re fer en ce and Tro ubleshooting, 2300 V D rives Chap ter 2 Fau lts and Tro ubl eshooting • • • • 2- 1 7 No. Name T ype Descrip tion 88 AC li ne under vol t Tri p The AC li ne under .
2-18 • • • • C hapter 2 Fau lts and Trou ble s hooting Inno vation Series Mediu m Vo lt age GP Typ e - G Drives GEH-6385 No. Name T ype Descrip tion 91 AC li ne fr eq hi gh Ala rm The AC li ne.
GEH-6385 Re fer en ce and Tro ubleshooting, 2300 V D rives Chap ter 2 Fau lts and Tro ubl eshooting • • • • 2- 1 9 No. Name T ype Descrip tion 93 AC li ne fr eq l ow Al arm The AC li ne f req .
2-20 • • • • C hapter 2 Fau lts and Trou ble s hooting Inno vation Series Mediu m Vo lt age GP Typ e - G Drives GEH-6385 No. Name T ype Descrip tion 98 Ambi ent over temp Trip The Ambi ent over temp tri p f aul t o ccu rs w hen th e am b i ent t em per at ur e ( v ari a bl e Bri dge ambi ent temp ) i s t o o hi g h.
GEH-6385 Re fer en ce and Tro ubleshooting, 2300 V D rives Chap ter 2 Fau lts and Tro ubl eshooting • • • • 2- 2 1 No. Name T ype Descrip tion 103 A-B vol tage offse t Tr ip The A-B voltage offset tr i p f aul t oc cu r s wh en t he A - B li n e- li n e v ol ta ge o ff s et ( v ari a bl e A-B , Vol t age o ff s et ) is t oo la rge .
2-22 • • • • C hapter 2 Fau lts and Trou ble s hooting Inno vation Series Mediu m Vo lt age GP Typ e - G Drives GEH-6385 No. Name T ype Descrip tion 109 Task 1 ex ec overrun Ala rm The Task 1 exec overrun al arm oc cu r s wh en T a sk 1 exc e eds i t s al lo tt ed CP U exe cut ion time .
GEH-6385 Re fer en ce and Tro ubleshooting, 2300 V D rives Chap ter 2 Fau lts and Tro ubl eshooting • • • • 2- 2 3 No. Name T ype Descrip tion 114 Ai n 1 signal al arm Al arm The Ai n 1 signal al arm occurs whe n t he leve l of analog inpu t number 1 ( v ari a bl e Anal og input 1 ) is too low .
2-24 • • • • C hapter 2 Fau lts and Trou ble s hooting Inno vation Series Mediu m Vo lt age GP Typ e - G Drives GEH-6385 No. Name T ype Descrip tion 116 Ai n 2 signal al arm Al arm The Ai n 2 signal al arm occurs whe n t he leve l of analog inpu t number 2 ( v ari a bl e Anal og input 2 ) is too low .
GEH-6385 Re fer en ce and Tro ubleshooting, 2300 V D rives Chap ter 2 Fau lts and Tro ubl eshooting • • • • 2- 2 5 No. Name T ype Descrip tion 119 Start permi ssi ve bad Ala rm The Start permi ssi ve bad al a rm oc c ur s wh en t h e st ar t p erm i s siv e c ir c ui t i s open and the drive i s stoppe d.
2-26 • • • • C hapter 2 Fau lts and Trou ble s hooting Inno vation Series Mediu m Vo lt age GP Typ e - G Drives GEH-6385 No. Name T ype Descrip tion 123 AS1 IG D M car d flt Tri p The AS 1 IGDM c ard f l t trip f ault i s hardwa r e ge nerated.
GEH-6385 Re fer en ce and Tro ubleshooting, 2300 V D rives Chap ter 2 Fau lts and Tro ubl eshooting • • • • 2- 2 7 No. Name T ype Descrip tion 125 AS3 IG D M car d flt Tri p The AS 3 IGDM c ard f l t trip f ault i s hardwa r e ge nerated.
2-28 • • • • C hapter 2 Fau lts and Trou ble s hooting Inno vation Series Mediu m Vo lt age GP Typ e - G Drives GEH-6385 No. Name T ype Descrip tion 127 BS1 IG D M car d flt Tri p The BS 1 IGDM c ard f l t trip f ault i s hardwa r e ge nerated.
GEH-6385 Re fer en ce and Tro ubleshooting, 2300 V D rives Chap ter 2 Fau lts and Tro ubl eshooting • • • • 2- 2 9 No. Name T ype Descrip tion 129 BS3 IG D M car d flt Tri p The BS 3 IGDM c ard f l t trip f ault i s hardwa r e ge nerated.
2-30 • • • • C hapter 2 Fau lts and Trou ble s hooting Inno vation Series Mediu m Vo lt age GP Typ e - G Drives GEH-6385 No. Name T ype Descrip tion 131 CS1 IGDM c ar d flt Tri p The CS1 IG DM ca rd flt trip fau lt i s ha rdwa re ge ne rate d.
GEH-6385 Re fer en ce and Tro ubleshooting, 2300 V D rives Chap ter 2 Fau lts and Tro ubl eshooting • • • • 2- 3 1 No. Name T ype Descrip tion 133 CS3 IGDM c ar d flt Tri p The CS3 IG DM ca rd flt trip fau lt i s ha rdwa re ge ne rate d.
2-32 • • • • C hapter 2 Fau lts and Trou ble s hooting Inno vation Series Mediu m Vo lt age GP Typ e - G Drives GEH-6385 No. Name T ype Descrip tion 135 AC li ne tr ansi ent Al arm The AC l i ne tr ansi ent alar m o ccurs as a result of signi ficant phase l ock loop error or sign ifi can t ph ase imbalance .
GEH-6385 Re fer en ce and Tro ubleshooting, 2300 V D rives Chap ter 2 Fau lts and Tro ubl eshooting • • • • 2- 3 3 No. Name T ype Descrip tion 136 AC li ne watchdog Tri p The AC li ne watchdog trip fa ult will oc cur when the AC l ine transient al arm persists fo r a bout one second .
2-34 • • • • C hapter 2 Fau lts and Trou ble s hooting Inno vation Series Mediu m Vo lt age GP Typ e - G Drives GEH-6385 No. Name T ype Descrip tion 138 AC li ne vfb offse t Tri p The AC li ne.
GEH-6385 Re fer en ce and Tro ubleshooting, 2300 V D rives Chap ter 2 Fau lts and Tro ubl eshooting • • • • 2- 3 5 No. Name T ype Descrip tion 145 Customer us e NC fl t Tri p The Customer use N C flt t ri p f a ult oc c ur s w hen th e c ust om er norm al l y cl os ed c i rc ui t i s o p en.
2-36 • • • • C hapter 2 Fau lts and Trou ble s hooting Inno vation Series Mediu m Vo lt age GP Typ e - G Drives GEH-6385 No. Name T ype Descrip tion 153 DSPx Wa tchdog Tri p Locke d The DSPx W atchdog trip fault occ u rs when the DSPX EPLD stops seeing a watchdog t ogg le bit from the pro cessor .
GEH-6385 Re fer en ce and Tro ubleshooting, 2300 V D rives Chap ter 2 Fau lts and Tro ubl eshooting • • • • 2- 3 7 No. Name T ype Descrip tion 162 LAN watchdog al arm Ala rm The LAN watchdog al ar m occurs when the connection b e t we en DSPX and the Application/LAN interface beco m es i nva lid.
2-38 • • • • C hapter 2 Fau lts and Trou ble s hooting Inno vation Series Mediu m Vo lt age GP Typ e - G Drives GEH-6385 No. Name T ype Descrip tion 169 Frame PL L not OK Alarm The Fr ame PL L not OK a larm occ urs whe n phase - lock be t we e n the DS PX control and the Syste m ISBus or (l oc al ACL) is not as sured.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -1 Chapter 3 Par amter s/Functions Introduction Chapter 4 de s c rib e s w izards. Applicatio n fi r mwa re co nsists of coo r dinated b loc ks of co d e called fu nctions .
3-2 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 L AN Ov e rview............................................................................................3 -34 Fra me P hase lo c k L oop .
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -3 Mo to r w ind i ng cf g..................................................................................... 3-1 14 Pre flux Fo rci n g ..
3-4 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Diagnostic an d Utility Funct ions Diagn ostic an d U tili ty Over view The Inno vatio n Se ries p rodu c ts c ontai n a n u mbe r o f diag n o stic f u nctio ns.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -5 The fo llow ing v ar iab le is als o an inpu t to the Capture Buffer f unc ti o n. Variable Description Capture bu ffer ready Enabl e s or d i sable s the captu re buffe r data collection.
3-6 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Function C onfigur ation Th e foll owin g t abl e speci fies t h e para m eter s that con fig ur e th e siz e and ex ecut ion ra t e of th e ca ptur e buf fer.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -7 Th e foll owin g t abl e speci fies t h e para m eter s that con fi gur e th e capt ur e buffer tr ig ger co ntr o l. The ca p tu re b uff e r will als o auto matic a lly trigge r o n the r isi n g edge of Trip fault act ive .
3-8 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Func tion desc r iption Th e ca ptur e buffer can be a ccessed fr om th e Tr en d R ec ord er in th e Con tr ol System T ool box .
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -9 Capture B uffer Compatible Behavior To v iew mo re t ha n 4 cha nnels o r more than 51 2 sa mp le s, t he Cap t ure Buffer f unctio n s h o uld b e use d w ith a G E Contro l Syst em Too lbox w ith a r e leas e o f at least V6.
3-10 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Ge neral Purpo se Cons tants E a ch In n ova t i on Ser i es pr odu ct pr ovi de s t h r ee g en er a l p urp ose con st a nt s.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -11 Gener al P urpos e Filt ers Eac h I nnov atio n S e r ie s p rodu ct co n ta ins f our ge ne ral purpo se f ilters . T h e ge neral pur po se f ilters allow use r s to f ilter s ignals wit h a spe cif ied b andw idth.
3-12 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 The ge neral purpo se f ilte r s r u n at the f astes t exe cutio n rate av ailab le i n t he p r o duc t.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -13 Posi tion Fe ed back Th e Posi ti on Fee d back fu n c tion p rov ides a set o f p o sitio n f eedb ack s ignals i n 22- b it fl oa ti n g p oin t for m at .
3-14 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Pr edefin ed Cons ta nts Ea ch Inn ovat ion S e r i es pr oduct con t ain s a num ber of pr edefi n ed con stan t s. Thes e con stan ts ar e ava ila ble for use in a var iet y of fun ct i ons .
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -15 Sign al Le vel De tec tor (S LD) Each Innov at io n Se r ies p r oduc t supplies three S LD c hann els . Eac h SLD do es a lev el com p ar i son on t wo in p ut s.
3-16 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Func tion desc r iption The fo llow ing d es criptio n e xpl ains the o per atio n o f S LD 1. It a lso app lies to SLD 2 and SLD3.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -17 SLD1 co m pare mode = In1= I n2 Turn on condition Absolute va l ue of ( Input 1 - Input 2) <= SLD1 se nsit iv ity Turn on delay time Tu rn on cond itio n mu st re m ain val id fo r S LD 1 p ick up de lay.
3-18 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Simu lato r Th e Sim u la tor f u nctio n allo w s the u se r to sim ulate t he o peratio n o f t h e d rive and mo to r w ithou t ap p ly ing po we r to the moto r, po we r b r i dge , a nd o ther eq uip me nt.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -19 Co ntr o l Di agno st ic V a ria b le s Th e Con trol Diag nostic V ariables f unc tio n o utputs filte r e d di agno stic va riab les t hat ar e a vail abl e to the u ser.
3-20 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Func tion outputs The f ollow ing tab le s pe c if ies th e ou tput vari ab les of th e L ine S imula tor f unc tio n.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -21 Pa tter n fi eld Th e pat t e rn fiel d i s desi gnat ed by th e char a cter G.
3-22 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 The f ollow ing tab le l ists the us e r-e n te red p arame ters th at s pec ify th e p rima ry moto r and app lica tion d ata: Parameter D escri p tion Mot or r ated c urr ent Mot or n am ep l at e current .
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -23 Calc u l ated control var iab l es Th e Inn ovat i on Seri es dr i ve co n t ain s a s.
3-24 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 General Setu p Function s Key pad O vervi ew The D r iv e Dia gno stic I nterf ace (DD I; als o k now n as the key pad) is mou n te d o n t he door of an Inn ova tion Ser ies drive.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -25 Ke ypad Cont rast Adj us tment No rmally the L CD c ont rast of the D riv e D iagno stic Inte r f ace (D DI) s h o uld be ad just ed at th e DDI or ke y pa d.
3-26 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Th e var iabl es di sp layed b y th e m eter s an d th e meter ran ges can be .
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -27 Ke ypad Secu rity Conf igura tion Th e DDI cont ain s secur it y con tr ols to keep un auth ori z ed per sonn el fr om oper at in g or r econ fig urin g th e dri ve.
3-28 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Func tion desc r iption Th e foll o wi n g t a bl e di s pla ys a l i st of a l l D DI fun ct i on s. Ava i la bl e fu n c ti on s for ea ch priv ilege lev el a r e m arke d w ith a c h ec k ma r k ( ü ).
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -29 Thr ee d iffer en t un it sy s tem s ar e a vail a ble: • Impe r ial (Englis h ) •.
3-30 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 The too lbo x w ill the n b uild the D DI Me nu f ile and ca n b e d o w n lo aded to the DD I. On ce th e downl oad is compl et ed, th e user can th en m odif y th e Languag e pa ramete r to t he de sire d valu e .
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -31 Digital inputs The f ollow i ng table s pec ifies th e signals available fo r testing t h e digit al inputs. Variable Description Di g it al i n put 1 t es t Unf i lt er ed va l u e of d i gi t al i n put 1.
3-32 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Relay outputs The f o llowi ng tab le s pe cif ies the parame te rs t hat c onf igure the re lay ou tput te st. Parameter D escri p tion Re l ay 1 te st Re l ay 1 outp ut.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -33 Digi tal In p uts/ Out pu ts and Ma pp ing Digital i nputs a n d o ut pu t s p r ov i de a n interface b et w e e n the o utside w orl d and t he co n tr ol .
3-34 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 LAN Functions LAN O ver view Info rmat io n is avail able fo r t h e f o llo w.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -35 Func tion desc r iption The p r o duc t co mplete ly hand les co nfig u ratio n o f the F rame Phas elock Loop fun ct ion .
3-36 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Conf igur ation par ameters The f o llow ing tab le s pe cif ies th e co n f igurat io n pa rame ters o f the L AN Configuration and H ealth f u n ctio n.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -37 Diagnostic var iables Th e foll owin g t abl e speci fies va r ia bles th at ind icat e th e LAN h ea lth an d sta tu s for th e LAN Config uration and Health f unc ti o n.
3-38 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 The L AN w atchdo g f unctio n de scr ib e s the s et o f mec h a nisms t he d.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -39 Ea ch 32-bi t el ement in th e LA N Signal Map is ass igne d a d ata ty pe. T h e f o llow ing data ty p es are us ed. • Single p r ecis ion f loating po int, IEEE 754 f ormat (23-b it m antissa , 8-bit expo n ent, 1-bit s ign).
3-40 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Th e foll owin g t abl e speci fies t h e L AN Sig nal Map r e quest b i ts that a ppear in P age 1 , E l em en t 1 of t h e r efer en c e si gn a l ma p.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -41 LAN Feedbac ks Sever al LA N feed back sig na ls ar e aver a ged ver sion s of in t e r nal dr i ve sign al s. Th e si gna l s that fa ll in th i s cat egor y a p pear in ded ica t ed f l oat in g poin t feedba ck ch an n els.
3-42 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Th e foll owin g t abl e speci fies t h e L AN Sig nal Map feed back bit s th at ap pear in Pa ge 1, El ement 1 of th e feed back s ig na l map.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -43 Th e foll owin g par am et e r s ar e used to sel ect th e gener a l pur pose feed back bit s.
3-44 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 M otor Control Functions Motor C ontr ol Ov ervi ew The I nno v atio n I n d uc tio n mo tor c ont rol algo r i th m u tilize s a F lux-Ve cto r co nt rol str ateg y .
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -45 Flu x C urve Th e Flux Cur ve de scrib es t h e re l atio nship be tw een the i n duc tio n mo to r v oltage and cur r e n t.
3-46 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 L eak age Indu ctan ce Cu r v e Th e Lea kage I nductan ce Curv e de sc ribe s the re latio n s hip b etwe en mo to r le ak age flu x an d t o r q ue curr en t.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -47 Motor tr ansf er functionality The f o llow ing tab le sp ec ifie s pa r ame ters rela ti ng to t he mo to r tr ansf er f unctio n .
3-48 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Ext e rn a l li n e re f e ren c e fu n ct i o n a li t y Th e use of a n ELR .
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -49 Mo to r Te mper atu re Es timati on Th e Motor Tempe ra tu re Estimati on f unctio n e st imates the roto r a nd s tato r temp er atu res.
3-50 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Faul ts and al arms Th e foll owin g tabl e speci fies th e fau lt s and al arm s tha t th e P ow er Dip Prot ection fun ct ion decl ar es.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -51 Func tion inp uts The f o llowi ng tab le s pe cif ies the inpu t v ar iab les of th e Tach Loss Detection f u nct io n. Variable Description Ou tput fre q, unf il M otor ele ctr ica l fre que ncy .
3-52 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Protective Funct ions Cus tom U ser Fa ul ts Eac h I nnov atio n Se r ie s p r o duct pro vide s the c apab ility to c onf igure tw o f ault circuits.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -53 Function c onfigur ation Th e foll owin g t abl e speci fies t h e DC L ink Pr otection co n figuratio n para meters. Parameter D escri p tion DC bus r e gion max Hi gh bounda ry of use r specified DC link vo ltage re gion.
3-54 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Gro und Fa ult Pr ot ection (Fas t) Th e Ground Fault P rotection (Fast) t est s th e pha se cur r ents t o ver ify th at th ere i s n o gr oun d cu rr ent in th e s y s tem .
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -55 Ha rdware Faul t Stri ngs E a ch In n ova t i on Ser i es pr od uc t pr ovi d es a h ar dwi r e d, fai l- s afe ci r cu it to t ur n of f b ridge po we r a nd to s h u t do wn its co n t rol.
3-56 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Heat sink T herm al Pr ot ect ion Th e He at si nk The r ma l Pr ot ec t io n funct i o n mea sur es th e power br i dg e h eat sin k and am bi ent tem per at ures and ver ifi es th a t th ey ar e at a safe oper a t in g level.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -57 Rel ated f aults and a lar ms Th e foll owin g faul ts an d alar ms ar e decl ar ed by th e H eatsink Therma l Prot ection f unctio n.
3-58 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Fault/Alarm Descript ion HtS ink DS te m p ho t Diode sou rce heats ink te m perature (v ariab le DS h eat si nk te mp ) is hig h.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -59 Func tion desc r iption Th e var iabl es Outp ut v olts , A- B an d O utpu t volts , B- C ar e filt er ed ver sion s of th e meas u red li n e-li n e vo ltage f ee d b acks .
3-60 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Faul ts and al arms Th e foll owin g tabl e speci fies th e fau lt s and al arm s tha t th e Mot or Overtemperat ure Dete ction fun ct i o n declar es .
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -61 Func tion desc r iption Th e var iabl es Phase A c urrent , P has e B curr ent , a nd Phas e C c urrent are f iltere d v e rsio ns o f the measu red p hase c u rre n t f ee d b acks .
3-62 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Faul ts and al arms Th e foll owin g t abl e speci fies t h e faul t s and al arm s associ at ed wi th th e Timed Over cur re nt D ete ction f u n ctio n.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -63 Th e foll owin g g r aph s show th e time a m otor of each of th e pr o t ecti on clas ses ca n o pe r ate b ef o re reac h in g t rip c ond itio ns.
3-64 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 The c ap ab ility of the d r iv e to p r o duc e t he o ve r lo ad c u rr e nt de pe nds on t h e cap acity of its po we r c ircuit .
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -65 Tran sf ormer O vert emper at ur e Dete cti on Th ose In n ovat ion S eri es pr oduct .
3-66 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Mot or Gro und Prote ction Th e Mo tor Groun d Protec tion fun cti on d et ect s a gr oun d fa ul t con d i ti on in t h e mot or phas es.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -67 Diagnostic var iables The f ollow ing tab le s pe c if ies th e diag nos tic v ari ab les of t h e Motor Gr ound Pr otection fu n cti on .
3-68 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Phas e Im bal ance Mon itor Th e Phas e Imbal ance Moni tor f u nctio n mo nito r s the c ond it io n of the p hase im balan ce on th e ac l in e as well as th e sta tu s o f th e ph ase l ock l oop.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -69 Faul ts and al arms Th e foll owin g t abl e speci fies t h e faul t s an d a lar ms of th e Phase Imbalan ce Monitor f unctio n.
3-70 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Lin e Mo ni tor Th e Lin e Monitor f unctio n mo n ito rs t h e AC li n e v o ltage and f r e que n c y and comp ar es th e m to a ccept abl e lim it s.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -71 Parameter D escri p tion Utili t y fee d De termines the bandwidth o f the P hase Lo ck Loop fun ct ion . I f se t to True , t he bandw idt h is set to obtain an a mount of “s luggis hness” appro p ri ate for a utilit y fee d.
3-72 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Phas e Lock L oop Th e Phas e Lock Lo op f unction o ut puts magnitude , freque n cy , and phase i nfo r mat ion to th e r est of the con tr ol , in c l udin g th e Li ne M oni t o r .
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -73 Variable Description PLL p roven Th is boo le an in dic a te s wh e the r the pl l is loc ke d. It is u se d throughou t the con t rol as a permissive to run or check various pr otections.
3-74 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Sequencer Fun ctions Se qu ence r Ove rvi ew Seque n cing is a key function of the I nnovation S eries drive . The s eque n ce r ov er se es th e st art ing an d st oppin g of th e dri ve.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -75 Func tion outputs Variable Description Trip fa ult ac tiv e Ind ica te s w he n a T ri p fau lt is p re se nt. Tri p faul t ac ti ve is T rue wh en a T r ip fau lt e x ists.
3-76 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Se qu ence r Pe rmi ssi ves Sequ en cer per mis sives ar e used to pr even t or al low th e dr ive t o r un if th e perm i ssi ve co nditio n e xis ts i n t he d rive .
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -77 In ternal Perm issiv e Inp ut s Variable Description Local fault string Local ha r dware per m iss ive. W hen Local faul t string is Tru e , i t will prevent the driv e from star tin g o r runni ng.
3-78 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Rel ated f aults and al arms The f ollow ing f au lts and a larms m ay b e ge n er ated w h e n t he Ready t o run perm issive is no t satis f ied .
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -79 No rmal St op Th e Norm al stop is th e t y p ica l w a y t o st op th e dr ive in a cont r olled man n er. A Nor m al stop ca n be con fi gu r e d a s Ram p s top , Coa st s top , or Q ui ck st op.
3-80 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Function c onfigur ation Parameter D escri p tion Normal s t op mode Selects the be havior o f a no rmal s t op. Possible choices are : Ram p stop Q ui ck st o p Coast st op ( See b el o w.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -81 Func tion inp uts Parameter D escri p tion X stop reque st se l Sel ec t s t h e var i abl e t hat is i nv er t ed and t hen us ed to dri v e X stop ac t i ve .
3-82 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Sequ e n cer Co mma nd s A se quencer r eque st is ge n e rated f r om v ar ious use r inputs to d ir e ct the se que n ce r to r un or fl ux th e dri ve.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -83 Func tion outputs Variable Description Run reque st Th e r eq ues t t o r un t he d ri v e. Th e det ai ls of t h e lo gi c w hi ch forms thi s signa l is s hown in the seque ncer di agr ams.
3-84 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Func tion outputs Variable Description Full flux reque st A reque st to enab l e the b ri dge and p re-flux the drive. This signal is t he output of Fu ll flu x re q sel and Full flux req, l an .
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -85 Se qu ence r Stat us The se quencer p r ov ides drive sta tus info r matio n that c an b e use d by various appl icat io n fu nctio ns a n d is als o us ed f or i nte rnal s eq ue nci ng fu nctio ns.
3-86 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Sequencer sta tus variable s Seque n cer status variab les a r e us ed to reque st a n d r epo rt status o f internal r egul ato r seque n cing.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -87 Main C ontact or Conf igurat ion Th e sequ en cer n orm all y con tr ol s the op era ti o n of the ma in (MA) con ta ctor.
3-88 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Func tion desc r iption Th e ma in (M A) conta ct or can be eith er be a utom ati ca lly con tr olled by the s equen cer , or inde pende ntly controlled by using t h e p aramete r , M A close req s el .
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -89 Speed Ref erence Fun ctions Critic al Spee d A void ance Th e Cri tical Sp e ed A v o idance f un ct i o n pr event s th e speed r efer en ce fr om enter in g sp ee d av o idance zone s.
3-90 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Th e ta ble belo w li sts h ow th e par amet ers defin e the cen ter speed s of each of th e speed a vo i da n ce zon es.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -91 Func tion desc r iption Th e Lo ca l Spe ed R efer en ce fu n cti on i s par t of th e Speed R eference Generat i on fun ct ion . It form s a speed r efer en ce si gnal from th e l ocal sour ce (th e DDI ).
3-92 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Func tion desc r iption Th e M inimum Sp ee d Limit f unc tio n is p art of th e Speed Referenc e Gen eration fun ct ion.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -93 Func tion desc r iption Th e Remo te Spee d Re fe re nce f unctio n is p art o f t he Spe ed R eference Generat ion fun ct ion .
3-94 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 After th e speed refer en ce h as been select ed from th e local or rem ot e sour ce, th e Speed Referenc e Genera tion f un c tio n allo w s s ev eral s ub ordina te f unctio ns to o pe rate on th e sp eed r efer en ce.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -95 Th e foll owin g tabl e speci fies th e con figu ra ti on par amet er s fo r th e sp eed ind epen d e n t ramp rate mo de, w h ic h is ac tive w h en Ramp rate mode is se t to I ndep a c cel /decel .
3-96 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Func tion desc r iption Th e Sp eed R efer en ce Ra mp f u nctio n is p art o f the Speed Ref e r e nce Ge nera tio n fun ct ion.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -97 Th e rat e of ch an ge of th e speed r efer en ce is lim it ed t o th e accel er at ion ra t e w h en th e ma gni t ude of th e sp eed refer en ce i s in c r eas in g.
3-98 • • • • C hap ter 3 Pa ramters/Fu nctions Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Func tion desc r iption Th e Sp eed R efer en ce Re verse fu n ct ion is par t of t h e S pe e d Re fe re nc e G e ner at i on fun ct ion.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3 -99 Speed/Torque Contro l Function s Droop Th e Droop fun ct i o n ad jus ts th e speed refer en ce t o compen s at e for th e differ en ce be t ween th e de sired and ac tual load torque.
3-100 • • • • Chap ter 3 Para m ters /Functio ns Inno vat ion Series Mediu m Vol tage G P Type - G Drives GEH-6385 Mot or Cont rol In te r fa ce Th e Mo tor C ontro l In ter face f unc tio n d.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3-101 Func tion outputs The f ollow ing tab le s pe c if ies th e ou tput vari ab les of th e Motor Con trol In terface f unctio n.
3-102 • • • • Chap ter 3 Para m ters /Functio ns Inno vat ion Series Mediu m Vol tage G P Type - G Drives GEH-6385 Function c onfigur ation The f o llow ing tab le s pe cif ies th e co n f igurat io n pa rame ters o f the Mot or C o ntr ol Interface f unc tio n.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3-103 The acti v e g ene rat ing to rque lim it is sub jec t to f urthe r limi ting b y the DC Bu s R e ge ner at io n C o nt ro l .
3-104 • • • • Chap ter 3 Para m ters /Functio ns Inno vat ion Series Mediu m Vol tage G P Type - G Drives GEH-6385 Failur e to rotate configur ation and oper ation The f o llow ing pa ramete rs c o nfigu re the Fa ilu re to r ota te fau l t.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3-105 Spee d Feed ba ck Cal culat io n Th e Sp eed Fe e dba ck Calcu l ation fun ct i o n pr ovi d es a s et of s pe ed fe ed ba ck si g na l s for co n tr ol and display pur poses.
3-106 • • • • Chap ter 3 Para m ters /Functio ns Inno vat ion Series Mediu m Vol tage G P Type - G Drives GEH-6385 Function c onfigur ation The f o llow ing tab le s pe cif ies th e co n f igurat io n pa rame ters o f the Sp e e d Fe edback Calcu latio n fun ct ion .
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3-107 Rel ated func tions Th e sp eed an d tor qu e contr ol fun ction s in cl uded in th e S peed/ Tor que O vervi ew f unctio n are lis ted b elo w .
3-108 • • • • Chap ter 3 Para m ters /Functio ns Inno vat ion Series Mediu m Vol tage G P Type - G Drives GEH-6385 Func tion outputs Th e foll owin g t abl e speci fies t h e cont inu ous si gn al var ia bles of t h e Spee d / To rq ue Regulator fun ct ion .
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3-109 Function c onfigur ation The f ollow ing tab le s pec if ies p ara mete r s th at s ele ct i n p ut v ar i able s o f the Speed/Torqu e Regula tor f u n ctio n.
3-110 • • • • Chap ter 3 Para m ters /Functio ns Inno vat ion Series Mediu m Vol tage G P Type - G Drives GEH-6385 Func tion desc r iption Th e Sp eed/Torque Regulator f un cti on i s an imp ort ant focal poin t for bo t h Speed and To rque r e gu latio n sy stems w ith i n t he d rive .
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3-111 Ov rd/S p d for ce d Force d Torque, spd overri de mo de : Spee d regulation m ode dyn.
3-112 • • • • Chap ter 3 Para m ters /Functio ns Inno vat ion Series Mediu m Vol tage G P Type - G Drives GEH-6385 System D ata Para meters Exec tim e/C ho p fre q The pa ra mete r Exe c tim e/Ch op freq d efin es th e Tas k 1 execu ti on p e r i od an d th e choppi ng freque n c y for the Innov a tio n Se r ies d ri v e produc t.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 3 Pa ramters /Functio ns • • • • 3-113 Flux de cay w ait in g : When a V /Hz o r Torqu e r e gu lated Tach less driv e is st .
3-114 • • • • Chap ter 3 Para m ters /Functio ns Inno vat ion Series Mediu m Vol tage G P Type - G Drives GEH-6385 Motor servi ce fa ctor Para mete r M otor service f actor speci fies t h e ra tio of th e act ual maxim um p ow er of the mo to r to i ts n amep late rate d po w er.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 4 Wizards • • • • 4- 1 Chapter 4 Wiz ards Introduction Th e dri ve’s oper a t or int er face s oftwa r e in clu des wi zar ds, wh ich ar e aut oma ted Window s-based “fo r ms” f or dri v e c onfiguratio n and tu neup.
4-2 • • • • C hap ter 4 Wizards Inno vat ion Series Mediu m Vol tage G P Typ e - G Drives G EH-6 385 Driv e Co mmis sio n i ng: St arti ng a n d Sto ppi ng t he D r iv e................................4- 19 Driv e Co mm iss io n i ng: Ma nua l R ef erenc e .
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 4 Wizards • • • • 4- 3 Pu lse Tes t ..........................................................................................................4-34 Pu lse Tes t: I n t r o duc tio n .
4-4 • • • • C hap ter 4 Wizards Inno vat ion Series Mediu m Vol tage G P Typ e - G Drives G EH-6 385 Cell Test Wizard Cell Test Op tion s Th e Cel l Test wiz ar d execut es ei th er th e Fi ber- Opti c T est or th e Bri dg e Cell T est de pe n d in g on th e va l ue of t h e T ype of Cel l Te st p aram et er.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 4 Wizards • • • • 4- 5 Ru nning th e Fib er-O ptic Te st Running the Tes t Rea d a ll o f the Fib er- Opt ic Test inst ru ction s in this s ectio n bef o re ru nnin g the t est.
4-6 • • • • C hap ter 4 Wizards Inno vat ion Series Mediu m Vol tage G P Typ e - G Drives G EH-6 385 Foll owi n g is th e corr ect LED li ght ing sequ e n ce for a dri ve wit h th e dy n a mic br ake o ptio n . 1. DB S1 8. BS 3 2. DB S2 9. BS 2 3.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 4 Wizards • • • • 4- 7 The fol low i ng are d escr iptions o f error messag e s. Error Message Descri p tion/Procedure Ce ll Te st in vo ke d in si mu lato r mod e . Th e si mul ato r mo de varia b l e Sim ulate mode ac t is TR UE.
4-8 • • • • C hap ter 4 Wizards Inno vat ion Series Mediu m Vol tage G P Typ e - G Drives G EH-6 385 Runni ng t he Bri d ge C ell T est Running the Tes t R un t h e tes t as f o llo ws : 1. Co nfirm that the d riv e sw itchge ar is o pe n and t h e d riv e is r e ady to b e c h arge d.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 4 Wizards • • • • 4- 9 The fol low i ng are d escr iptions o f bridg e test fail ure m essages . Error Message Descri p tion/Procedure Short c ircuit de t e cti on test failed.
4-10 • • • • C hap ter 4 Wizards Inno vat ion Series Mediu m Vol tage G P Typ e - G Drives G EH-6 385 Dyna mi c brake ope n circuit dete ct ion test did no t run . The dyna mi c b rake ope n circuit dete ct ion test is not pe rf ormed if the sh ort circu it dete ction te st fai ls.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 4 Wizards • • • • 4- 1 1 Drive C ommi ssioning Drive C om mis sioni n g: Over vie w Th e Drive Commi ssioning wizard gu ides the user throug h th e proc ess of co n figuring t he d r iv e f o r a pa rticu lar ap plic a tio n.
4-12 • • • • C hap ter 4 Wizards Inno vat ion Series Mediu m Vol tage G P Typ e - G Drives G EH-6 385 Dr ive Com mis sioni n g: AC So urce Sel ectio n The f requ e n cy sele ctio n is u se d to calib r ate the inpu t li ne mo nito r . U se th e f reque n c y of th e AC line inpu t to th is I nnov ation Se ries D r iv e .
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 4 Wizards • • • • 4- 1 3 Dri ve Commiss ion i ng : Mot or C rosso v er Vo ltage Crossover V oltag e sp ecifi es th e volt ag e above wh i ch fiel d wea ken in g occur s.
4-14 • • • • C hap ter 4 Wizards Inno vat ion Series Mediu m Vol tage G P Typ e - G Drives G EH-6 385 Motor Nameplat e and E quiva lent Circu it Data Flux Curve Data Dr ive Com mis sio nin g: Mo tor D at a Sh ee t - Equi val e nt Cir cui t D ata The mo tor d ata s hee t is avai lable fro m the mo to r su ppl ier.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 4 Wizards • • • • 4- 1 5 Mo to r win din g res ist ances : Stator h ot res R 1 and Rotor ho t res R2 v alue s are lis ted ab ov e as R1 a nd R2 . Th e “hot ” t em perat ur e is li st ed h er e as R QWDG, i s in un its of deg r ees Cel si us.
4-16 • • • • C hap ter 4 Wizards Inno vat ion Series Mediu m Vol tage G P Typ e - G Drives G EH-6 385 Dr ive C omm is sioni n g: Ta ch ome ter S up por t Th e Inn ovat i on Seri es dr i ve can op era te wi th or with ou t a ta ch o m eter .
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 4 Wizards • • • • 4- 1 7 Dr ive C omm is sio nin g: S to ppin g C onf igur a ti on Wh en th e dri ve is r unnin g nor mal ly an d the r un req uest become s fal se, th e dri ve will be brought to a sto p.
4-18 • • • • C hap ter 4 Wizards Inno vat ion Series Mediu m Vol tage G P Typ e - G Drives G EH-6 385 Dr ive C omm is sioni n g: X -Sto p C onfi gur ati o n Th e Run r eq & xstop o pe n tr.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 4 Wizards • • • • 4- 1 9 Dr ive Com mis sio nin g: R un Re ad y Per mi ssive Stri ng Bypass Q /C stop This par amete r remo v es Coas t stop active and Q uic k stop ac tiv e fr o m t h e Rea dy t o run p e r mi ssi ve, wh en th ey ar e n o r ma ll y i n cl ud ed.
4-20 • • • • C hap ter 4 Wizards Inno vat ion Series Mediu m Vol tage G P Typ e - G Drives G EH-6 385 Dri ve Commiss ion i ng : Max imu m Speed Refer en ces Parameter D escri p tion Ma x f or w ar d sp eed M axi m um f or w ard r ef er en c e t o t he s p eed r eg u l at or .
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 4 Wizards • • • • 4- 2 1 Wh en th e pr ogram m ed ram p r ate m ode is a ct ive, th e a ccel era ti o n an d d ecel er ati on ra t es dep end on th e magn it ud e of th e sp eed r eferen ce.
4-22 • • • • C hap ter 4 Wizards Inno vat ion Series Mediu m Vol tage G P Typ e - G Drives G EH-6 385 Dri ve Commiss ioning: R e fere nce Ramp Pr ogram me d A cce lera tio n R ates The p r o g ramme d ramp rate imple me nts a s pee d dep ende nt ramp rate pro file .
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 4 Wizards • • • • 4- 2 3 Dri ve Commiss ioning: R e fere nce Ramp Pr ogram me d D ece lera tio n S pee ds The p r o g ramme d ramp rate imple me nts a s pee d dep ende nt ramp rate pro file .
4-24 • • • • C hap ter 4 Wizards Inno vat ion Series Mediu m Vol tage G P Typ e - G Drives G EH-6 385 Rel ated func tions • Speed/Torqu e R egula t or Dr ive C omm is sioni n g: Tor que R eg.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 4 Wizards • • • • 4- 2 5 Spd reg pos err lim speci fies t h e all ow abl e di ffer en ce bet ween th e sp eed comm and an d th e speed feed back wh en the mot or i s r unn in g too slow.
4-26 • • • • C hap ter 4 Wizards Inno vat ion Series Mediu m Vol tage G P Typ e - G Drives G EH-6 385 Drive C ommis sioni ng: Faile d Calcula tion The calc ulat ion FA IL ED b ec ause of impro pe rly ente red moto r d ata .
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 4 Wizards • • • • 4- 2 7 Driv e Commiss ion ing: Curre nt Limi ts Ente r t he no r m al ( 1) and alte rnate (2) pe r-un it c ur re nt li mits : Cur rent lim it 1 will b e u se d w h e n Tor q ue l im 2 s e l is fals e.
4-28 • • • • C hap ter 4 Wizards Inno vat ion Series Mediu m Vol tage G P Typ e - G Drives G EH-6 385 Drive C omm issio nin g: Exit R em ind er After th e Dr ive C omm iss ion ing w iza rd c omple tes , the d rive shoul d h av e a hard reset p e r form ed.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 4 Wizards • • • • 4- 2 9 Line re ferenc e speci fies t h e sour ce of th e uti li ty lin e refer en ce. Set t o Int ernal to use the i nte rnal ly ge nerate d li n e r e f ere nce sig n a l.
4-30 • • • • C hap ter 4 Wizards Inno vat ion Series Mediu m Vol tage G P Typ e - G Drives G EH-6 385 Drive response window for interna l line r e ference Display Descr ipt ion Phase angle no load The phase ang l e difference m e asur e d betwe en the drive sour ce voltage and the ut ility vo lt a ge .
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 4 Wizards • • • • 4- 3 1 M otor Control Tuneup Mot or Cont rol Tun e u p: Equ i v alent Circu it The equiv a le n t ci r cuit.
4-32 • • • • C hap ter 4 Wizards Inno vat ion Series Mediu m Vol tage G P Typ e - G Drives G EH-6 385 Mot or Cont rol Tuneu p: Meas urement s Wh en s elect in g all th e mea sur em e n t s the.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 4 Wizards • • • • 4- 3 3 Line Protection S etup Line P ro te cti on: I ntr od ucti on Th e Li ne Pro te ct i o n Se t up w iz.
4-34 • • • • C hap ter 4 Wizards Inno vat ion Series Mediu m Vol tage G P Typ e - G Drives G EH-6 385 Line P ro te ctio n: O verfr eq ue ncy The se parame te r s s e t t h e lev el o f prote ctio n o f t h e ac li n e o v erf r eq ue ncy pr o tec tio n.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 4 Wizards • • • • 4- 3 5 Puls e Tes t: An alog Outp ut Co nfig uratio n Th e Pul se Test u se r ma y con fi gur e t wo an alog ou tp ut chan n els fr om with in the P ul se Tes t Wi zar d.
4-36 • • • • C hap ter 4 Wizards Inno vat ion Series Mediu m Vol tage G P Typ e - G Drives G EH-6 385 De tailed des crip tions of th e P ark a n d Puls e s tate s are as f o llo ws : Bridge State Description Off s tat e Al l th e p ow er dev i c es i n t h e br id ge a r e tu r n ed of f .
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 4 Wizards • • • • 4- 3 7 Puls e Tes t: Timer Co nfi gur ati on The Pulse Te st allow s up to tw o vo ltage pulse s to be co m manded and p r o duce d by the po wer bridge .
4-38 • • • • C hap ter 4 Wizards Inno vat ion Series Mediu m Vol tage G P Typ e - G Drives G EH-6 385 Simulator S etup Simu lato r Setu p: In trodu ction Th e Sim u la tor S etu p c o nfig u res t h e d rive to r u n i n s imu lato r mode .
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 4 Wizards • • • • 4- 3 9 Speed Regulator Tuneup Spee d R eg ulat or Tu ne up: M odel The si mplif ied mo de l o f the sp ee d.
4-40 • • • • C hap ter 4 Wizards Inno vat ion Series Mediu m Vol tage G P Typ e - G Drives G EH-6 385 Spee d R eg ulat or Tu ne up: S pee d R eg ulat or Mod e • Ma nually tu n e-up individua.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Chap ter 4 Wizards • • • • 4- 4 1 Spee d R eg ulat or Tu ne up: 2 n d Ord er R esp o nse with S ti ffne ss Fil ter Calculate spe ed regulato r g ains b a se d on 2 nd o r d er cl osed l oop r es pon se an d se t th e sp ee d fe edb ack f ilter to 10 time s t h e ba n dw idth.
4-42 • • • • C hap ter 4 Wizards Inno vat ion Series Mediu m Vol tage G P Typ e - G Drives G EH-6 385 Notes.
GEH-6385 Re ference and T roub leshooting, 2300 V D rives Chap t er 5 Signal Map ping • • • • 5- 1 Chapt er 5 Signa l Mapping Introduction The IS200D SPX Dig ital Signal Pr ocessor board (D SPX) contains and impl em ents th e d riv e’s contr ol s o ftw are.
5-2 • • • • C hap ter 5 Signal Map ping Innovation Series Mediu m Vol tage G P Type - G Drives GEH-6385 LAN Interfaces The LA N inte rfacing f or the M CL requires the additio n of a c ommu ni.
GEH-6385 Re ference and T roub leshooting, 2300 V D rives Chap t er 5 Signal Map ping • • • • 5- 3 Parameter Configurati on for Signal M apping Pa ram eter s ar e us ed in th e d r i ve fo r con fig ura ti on of fun ct i o n s .
5-4 • • • • C hap ter 5 Signal Map ping Innovation Series Mediu m Vol tage G P Type - G Drives GEH-6385 Variable M apping Al so refer to “Varia ble Maps” in this c hap t er .
GEH-6385 Re ference and T roub leshooting, 2300 V D rives Chap t er 5 Signal Map ping • • • • 5- 5 Applying t he LAN He artbeat E cho Featur e Wh en con tr oll in g a drive over a LA N, bot h th e contr ol ler and th e dri ve n eed to mon it or an d rea ct t o c h an ges in th e sta tu s of LAN h ealth .
5-6 • • • • C hap ter 5 Signal Map ping Innovation Series Mediu m Vol tage G P Type - G Drives GEH-6385 Application of F eedback Signals In m ost control sy stem s th e LAN (Ge n ius, P r of i bus-DP, and such) opera tes as ynch r o n ous wi th th e execu ti on of co n tr ol l ogi c.
GEH-6385 Re ference and T roub leshooting, 2300 V D rives Chap t er 5 Signal Map ping • • • • 5- 7 Real V aria ble Map Reference Feedback Byte Vari ab l e Functionality Vari ab le Functionalit.
5-8 • • • • C hap ter 5 Signal Map ping Innovation Series Mediu m Vol tage G P Type - G Drives GEH-6385 Boolea n Var iable Ma p Reference Feedback Byte Vari ab l e Functionality Vari ab le Fun.
GEH-6385 Re ference and T roub leshooting, 2300 V D rives Chap t er 5 Signal Map ping • • • • 5- 9 Reference Feedback Byte Vari ab l e Functionality Vari ab le Functionality 15 Dr oop disab re.
5-10 • • • • C hap ter 5 Signal Map ping Inno vat ion Series Medium Vo ltage G P Typ e - G Drives G EH-6385 Notes.
GEH-6385 Re fere n ce and T roules h ooting, 2300 V D rives App endix A Fu nct io n Block D iagrams • • • • A- 1 Appendix A Fun ction B lock Diagra ms Introduction Applicatio n fi r mwa re co nsists of coo r dinated b loc ks of co d e called fu nctions (r efer to C h ap ter 3) .
A-2 • • • • Ap p endix A Fu nction Blo ck Diagram s Inno vat ion Series Mediu m Vol tage G P Typ e - G Drives G EH-6385 Diag ram Titl e Page Name Mo to r Co n t rol Inte r f ace..................................................................
Overview.vsd Innovation Control Device name: Date: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 GE Motors and Industrial Systems Salem, Va. USA PRODUCT: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15.
ACMVAC-G Inverter Index Contents.vsd Innovation Control Device name: Date: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 GE Motors and Industrial Systems Salem, Va.
Digital Inputs/Outputs & Mapping Overview Overview NAVIGATION HWIO_Dig.vsd Innovation Control Device name: Date: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 GE Motors and Industrial Systems Salem, Va.
Analog Inputs/Outputs & Mapping Overview Overview NAVIGATION HWIO_Ana.vsd Innovation Control Device name: Date: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 GE Motors and Industrial Systems Salem, Va.
SigMap_LAN.vsd Innovation Control Device name: Date: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 GE Motors and Industrial Systems Salem, Va. USA PRODUCT: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 .
Drive Lan Boolean Signals (bits 0-15) SigMap_Bit1.vsd Innovation Control Device name: Date: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 GE Motors and Industrial Systems Salem, Va.
Drive Lan Boolean Signals (bits 16-31) SigMap_Bit2.vsd Innovation Control Device name: Date: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 GE Motors and Industrial Systems Salem, Va.
Ovr_Lin_Mon.vsd Innovation Series Device name: Date: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 GE Motors and Industrial Systems Salem, Va. USA PRODUCT: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 .
Ovr_Pll.vsd Innovation Series Device name: Date: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 GE Motors and Industrial Systems Salem, Va. USA PRODUCT: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 A.
Ovr_Seq.vsd Innovation Control Device name: Date: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 GE Motors and Industrial Systems Salem, Va. USA PRODUCT: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 .
GenSeq_1.vsd Innovation Control Device name: Date: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 GE Motors and Industrial Systems Salem, Va. USA PRODUCT: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15.
GenSeq_2.vsd Innovation Control Device name: Date: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 GE Motors and Industrial Systems Salem, Va. USA PRODUCT: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15.
GenSeq_3.vsd Innovation Control Device name: Date: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 GE Motors and Industrial Systems Salem, Va. USA PRODUCT: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15.
GenSeq_4.vsd Innovation Control Device name: Date: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 GE Motors and Industrial Systems Salem, Va. USA PRODUCT: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15.
GenSeq_5.vsd Innovation Control Device name: Date: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 GE Motors and Industrial Systems Salem, Va. USA PRODUCT: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15.
Ovr_RfSel.vsd Innovation Control Device name: Date: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 GE Motors and Industrial Systems Salem, Va. USA PRODUCT: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 1.
CrSpdAvd.vsd Innovation Control Device name: Date: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 GE Motors and Industrial Systems Salem, Va. USA PRODUCT: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15.
Ramp.vsd Innovation Control Device name: Date: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 GE Motors and Industrial Systems Salem, Va. USA PRODUCT: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 A B.
Ovr_SpTq.vsd Innovation Control Device name: Date: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 GE Motors and Industrial Systems Salem, Va. USA PRODUCT: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15.
To Speed Regulator Spd_Fbk.vsd Innovation Control Device name: Date: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 GE Motors and Industrial Systems Salem, Va.
From Speed / Torque Overview Ovr_SpTq From Speed Feedback Spd_Fbk SReg.vsd Innovation Control Device name: Date: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 GE Motors and Industrial Systems Salem, Va.
Droop.vsd Innovation Control Device name: Date: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 GE Motors and Industrial Systems Salem, Va. USA PRODUCT: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 A .
January 29, 1999 Core.vsd Innovation Control Device name: Date: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 GE Motors and Industrial Systems Salem, Va.
Voltage Feedforward Model Motor Control Ovr_MCtrl.vsd Innovation Control Device name: Date: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 GE Motors and Industrial Systems Salem, Va.
Diag_Util.vsd Innovation Control Device name: Date: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 GE Motors and Industrial Systems Salem, Va. USA PRODUCT: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 1.
SLD.vsd Innovation Control Device name: Date: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 GE Motors and Industrial Systems Salem, Va. USA PRODUCT: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 A B .
Capture.vsd Innovation Control Device name: Date: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 GE Motors and Industrial Systems Salem, Va. USA PRODUCT: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 .
PosFbk.vsd Innovation Control Device name: Date: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 GE Motors and Industrial Systems Salem, Va. USA PRODUCT: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 A.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Index • • • • 1 Index 1 115VAC, 3-55 2 24 VDC , 3- 33 B bar graph, 3-26 baud rate, 3-36 C CB1, 4-5 , 4-8 Co nt ro l C a rds IS200ACL _.
2 • • • • Index Inno vat ion Series Meduim Vo ltage G P – T ype G Drives GE H -6385 Gr oun d fl t, LP , 2- 10 H tSin k A o ve r temp, 2-13, 3 -57 H tSin k A rise hi g h, 2-15, 3-57 H tSin k .
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Index • • • • 3 Mo tor Te mpe ratu r e Esti matio n , 3-4 9 Os cillato r, 3-4 , 3 -12 Pha se C urr ent Pr otect i on , 3- 60 Phase Imb.
4 • • • • Index Inno vat ion Series Meduim Vo ltage G P – T ype G Drives GE H -6385 An a l og ou t 1 sel e ct , 3 -3 2 An a l og ou t 1 t est , 3- 3 1 Anticipated torque, 3-4 7, 4-29 Applied.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Index • • • • 5 Jo g request se lect, 3-79, 3- 82, 4-1 9, 5-8 Key pad c ontras t ad j , 3 -2 5 Key pad m ete r 1 r ange , 3-26 Key pad.
6 • • • • Index Inno vat ion Series Meduim Vo ltage G P – T ype G Drives GE H -6385 Run pe rm issiv e sel, 3-76, 4-19 Run reque st sele ct, 3-79 , 3-82, 4-19 , 5-8 Sim A -N vo lt sc ale, 3 -.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Index • • • • 7 T tachome ter, 3-13, 3-44, 3-50, 3-51 , 3-105, 3 -106, 3 - 107, 3-112 , 4-16 Timed o vercurent, 3-6 2, 3-64 Too l bo x.
8 • • • • Index Inno vat ion Series Meduim Vo ltage G P – T ype G Drives GE H -6385 Gn d curr ent , coar se, 3- 54 Gnd f lt trip, 3-66, 3-67 Gnd f lt wa rning, 3- 66, 3-6 7 G P C o nst a nt .
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Index • • • • 9 Po s dow n edge smp, 3- 13 Po s up edge sam p le, 3-13 Po sitio n c o unte r, 3-1 3 Quick sto p a c tiv e, 3-77, 3-85,.
10 • • • • Index Inno vat ion Series Meduim Vo ltage G P – T ype G Drives GE H -6385 X axis l in e v oltage, 3-68 , 3-69, 3 - 72, 3- 73 X sto p activ e, 3-42, 3-76, 3-8 1, 4-18 , 5-8 X sto p.
GEH-6385 Re ference a nd Tro ubleshooting, 2300 V D rives Index • • • • 11 Runn in g th e Fiber -O pti c Te st, 4-5 Simu lato r S etu p , 4 -38 Conclusio n, 4-38 H ard w are F au lt S t ring O.
12 • • • • Index Inno vat ion Series Meduim Vo ltage G P – T ype G Drives GE H -6385 Notes.
:HZHOFRPHFRPPHQWVDQGVXJJHVWLRQVWR PDNHWKLVSXEOLFDWLRQPRUHXVHIXO <RXU1DPH 7RGD¶V'DWH <RXU&RPSDQ¶V1DPHDQ G$GGUHVV -RE6LWH *(5HTX.
.
.
*(,QGX VWUL D O6VWHPV.
Ein wichtiger Punkt beim Kauf des Geräts GE 2300 V (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie GE 2300 V noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für GE 2300 V - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von GE 2300 V reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über GE 2300 V erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon GE 2300 V besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von GE 2300 V verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit GE 2300 V. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei GE 2300 V gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
