Benutzeranleitung / Produktwartung ASC-2E des Produzenten Alto-Shaam
Zur Seite of 30
W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 USA PHONE: 262.251.3800 • 800.558.8744 USA / CANADA FAX: 262.251.7067 • 800.
i Delivery .................................................................... 1 Unpacking ................................................................ 1 Safety Procedures and Precautions .......................... 2 Installation Site Installation .
ASC-2E & ASC-4E Electric Convection Ovens - Electronic Control • 1 DELIVERY This Alto-Shaam appliance has been thoroughly tested and inspected to ensure only the highest quality unit is provided. Upon receipt, check for any possible shipping damage and report it at once to the delivering carrier.
ASC-2E & ASC-4E Electric Convection Ovens - Electronic Control • 2 CAUTION Used to indicate the presence of a hazard that can or will cause minor personal injury, property damage, or a potential unsafe practice if the warning included with this symbol is ignored.
ASC-2E & ASC-4E Electric Convection Ovens - Electronic Control • 3 INSTALLATION SITE INSTALLATION The Alto-Shaam convection oven must be installed in a location that will permit the oven to function for its intended purpose and to allow adequate clearance for ventilation, proper cleaning, and maintenance.
ASC-2E & ASC-4E Electric Convection Ovens - Electronic Control • 4 INSTALLATION 30-5/8" (778mm) 8" (203mm) CA VITY VENT ELECTRICAL INLET 3-5/32" (80,1mm) 9-15/16" (252mm) ELE.
ASC-2E & ASC-4E Electric Convection Ovens - Electronic Control • 5 INSTALLATION The oven must be mounted on the factory equipped oven legs or on an optional oven stand. Installation on a solid or concrete base that in any way restricts air flow may void the warranty.
ASC-2E & ASC-4E Electric Convection Ovens - Electronic Control • 6 INSTALLATION The oven must be installed by a qualified electrician. This appliance must be branch circuit protected with proper ampacities, in accordance with the wiring diagram located in this manual or in the electrical compartment of the oven.
ASC-2E & ASC-4E Electric Convection Ovens - Electronic Control • 7 INSTALLATION (2-ASC-2E/STK SHOWN ) CAUTION TO PREVENT PERSONAL INJURY, USE CAUTION WHEN MOVING OR LEVELING THIS APPLIANCE.
ASC-2E & ASC-4E Electric Convection Ovens - Electronic Control • 8 INSTALLATION (2-ASC-4E/STK 208/240V SHOWN ) After legs or casters have been installed on the bottom oven, place the upper oven on top of lower unit.
ASC-2E & ASC-4E Electric Convection Ovens - Electronic Control • 9 INSTALLATION 8 1 1 7 3 4 2 9 1 2 34-5/16" (876mm) 5 6 2 38" (956mm) DESCRIPTION PART NO.
OPERATING INSTRUCTIONS ASC-2E & ASC-4E Electric Convection Ovens - Electronic Control • 10 CAUTION METAL PARTS OF THIS EQUIPMENT BECOME EXTREMELY HOT WHEN IN OPERATION. TO AVOID BURNS, ALWAYS USE HAND PROTECTION WHEN OPERATING THIS APPLIANCE.
OPERATING INSTRUCTIONS ASC-2E & ASC-4E Electric Convection Ovens - Electronic Control • 11 The oven includes 6 chrome plated wire shelves with two removable side racks and 12 shelf positions spaced at 1- 3/ 4" (43mm).
OPERATING INSTRUCTIONS ASC-2E & ASC-4E Electric Convection Ovens - Electronic Control • 12 1 B LED DISPLAY C UP/DOWN ARROWS D COOK.
OPERATING INSTRUCTIONS ASC-2E & ASC-4E Electric Convection Ovens - Electronic Control • 13 Q “ON.” • Thedisplay 2 will alternate between last Cook Set Temperature and actual Cavity Temperature.
OPERATING INSTRUCTIONS ASC-2E & ASC-4E Electric Convection Ovens - Electronic Control • 14 This Alto-Shaam electronic convection oven allows the operator to program up to seven cooking procedures.
OPERATING INSTRUCTIONS ASC-2E & ASC-4E Electric Convection Ovens - Electronic Control • 15 Stop an Operation: Press Start/stop L Key. The oven will remain in a power-on state, and the operation will be cancelled. Press Cook 8 to set procedure again.
ASC-2E & ASC-4E Electric Convection Ovens - Electronic Control • 16 The Alto-Shaam convection oven will provide the best results and longest possible service with the utilization of the following suggestions and guidelines.
CARE AND CLEANING ASC-2E & ASC-4E Electric Convection Ovens - Electronic Control • 17 PROTECTING STAINLESS STEEL SURFACES It is important to guard against corrosion in the care of stainless steel surfaces. Harsh, corrosive, or inappropriate chemicals can completely destroy the protective surface layer of stainless steel.
CARE AND CLEANING ASC-2E & ASC-4E Electric Convection Ovens - Electronic Control • 18 1. After the oven has cooled, remove all detachable items such as wire shelves, side racks, and drip pan.
SERVICE ASC-2E & ASC-4E Electric Convection Ovens - Electronic Control • 19 Error Code Description Possible Cause E-10 Cavity air sensor shorted Cavity air sensor reading < 5°F.
SERVICE ASC-2E & ASC-4E Electric Convection Ovens - Electronic Control • 20 Part numbers and drawings are subject to change without notice. 2 3 6 7 9 8 11 13 14 16 15 10 1 5 4 12 17 DESCRIPTION PART NO.
SERVICE ASC-2E & ASC-4E Electric Convection Ovens - Electronic Control • 21 Part numbers and drawings are subject to change without notice. 2 3 6 7 9 8 20 18 11 13 14 16 15 17 10 21 1 5 19 4 12 *Not Shown DESCRIPTION PART NO.
SERVICE ASC-2E & ASC-4E Electric Convection Ovens - Electronic Control • 22 Part numbers and drawings are subject to change without notice. .
SERVICE ASC-2E & ASC-4E Electric Convection Ovens - Electronic Control • 23 PARTS LIST Exterior Pane.
ASC-2E & ASC-4E Electric Convection Ovens - Electronic Control • 24.
ASC-2E & ASC-4E Electric Convection Ovens - Electronic Control • 25.
ASC-2E & ASC-4E Electric Convection Ovens - Electronic Control • 26.
ASC-2E & ASC-4E Electric Convection Ovens - Electronic Control • 27.
TRANSPORTATION DAMAGE and CLAIMS All Alto-Shaam equipment is sold F.O.B. shipping point, and when accepted by the carrier, such shipments become the property of the consignee. Should damage occur in shipment, it is a matter between the carrier and the consignee.
Ein wichtiger Punkt beim Kauf des Geräts Alto-Shaam ASC-2E (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Alto-Shaam ASC-2E noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Alto-Shaam ASC-2E - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Alto-Shaam ASC-2E reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Alto-Shaam ASC-2E erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Alto-Shaam ASC-2E besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Alto-Shaam ASC-2E verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Alto-Shaam ASC-2E. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Alto-Shaam ASC-2E gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
