Benutzeranleitung / Produktwartung 6K25e des Produzenten GarrettCom
Zur Seite of 69
i www Garre t t C om c om .. www Garre t t C om c om .. Corporate Headquarters GarrettCom, Inc. 47823 Westinghouse Dr. Fremont, CA 94539-7437 Phone (510) 438-9071 Fax (510) 438-9072 Website: http ://www.
Magnum Gigabit Fiber Switch Installation and User Guide (10/07) i www Garre t t C om c om .. Magnum 6K25e Managed Fiber Switch Hardware Installation and User Guide Part #: 84-00163Z (Rev.
Magnum Gigabit Fiber Switch Installation and User Guide (10/07) ii www Garre t t C om c om .. Contacting GarrettCom, Inc Please use the mailing address, phone and fax numbers and email address listed below: GarrettCom, Inc. 47823 Westinghouse Dr. Fremont, CA 94539-7437 Phone (510) 438-9071 Fax (510) 438-9072 Website: http ://www.
Magnum Gigabit Fiber Switch Installation and User Guide (10/07) iii www Garre t t C om c om .. TABLE OF CONTENTS Page 1.0 SPECIFICATIONS ................................................................................ 1 1.1 Technical Speci fications..
Magnum Gigabit Fiber Switch Installation and User Guide (10/07) iv www Garre t t C om c om .. 5.0 6K25E MANAGED FIBER SWITCH PORT MODULES .................... 42 5.1 Inspecting the Package and Product ..................................................
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) www Garre t t C om c om .. The Magnum Line INDUSTRIAL NETWORKING PRODUCTS "DESIGNED AND M ANUFACTURED IN THE US A" OVERVIEW GarrettCom, Inc.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 1 www Garre t t C om c om .. 1.0 SPECIFICATIONS 1.1 Technical Specifications Performance Filtering / Forwarding Rate: Ethernet:14,880 pps Fast Ethernet: 148,800 pps Gigabit Ethernet: 1, 488,000 pps Switching Processing Ty pe: Store and Forward w ith IEEE 802.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 2 www Garre t t C om c om .. Fiber Multi-mode connector typ es supported: Fiber Port, ST-type (twist-lock):Fiber multi-mode, 10Mb .
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 3 www Garre t t C om c om .. For DC internal power supplies at –48VDC, 24VDC and 125VDC, including Dual Source options ( for continuity of operation when either of the DC input sources are interrupted) , see Appendices B and C.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 4 www Garre t t C om c om .. 1.2 Ordering Information Magnum Managed Fiber Switch MODEL DESCRIPTION Magnum 6K25e Magnum 6K25e Managed Fi ber Switch, base unit. May be configured with a selecti on of 10/100/1000 6K25e fiber and copper port connector types, 25 total ports max.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 5 www Garre t t C om c om .. For Gigabit module configuration options GBPM-COTX One slot Gigabit 6K module for 6K25e Switches, use.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 6 www Garre t t C om c om .. New P6KP8-452SLC “6+2” port PoE module for 6ks w ith 48vdc PS, w/four PoE power source and four 1.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 7 www Garre t t C om c om .. 2.0 Introduction 2.1 Inspecting the Package and Product Examine the shipping container for obvious damage prior to installing this product; notify the carrier of any damage that you believe occurred during shipment or delivery.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 8 www Garre t t C om c om .. Gigabit port in the same unit. This flexib ility is achieved via a family of 6K25e port modules for c.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 9 www Garre t t C om c om .. 2.2.1 Magnum 6K25e and 6K25eR chassis The Magnum 6K25e is a 19” rack-mountable Ethern et Switch with three eight-port slots (A, B, and C) and one Gb-onl y slot (D) for configuration flexibility.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 10 www Garre t t C om c om .. In an eight-port SFF fiber port module, a ll of the fiber ports are of the same speed (100Mb), mode, and connector type.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 11 www Garre t t C om c om .. eliminate the need of cross-over cable. On the model 6K8-RJ45 module, there ar e four LEDs for each port, two in the connector and two separate. The LK (Link) LED indicates “ready for operation” on that port when lit.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 12 www Garre t t C om c om .. ordering information Sec.1.2. for all the various PI6K PoE modules option. The LEDs on 6KP8-RJ45- PoE module are slightly different compared to regular (non-PoE) RJ-45 modules as shown in Fig 2.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 13 www Garre t t C om c om .. (MDIX) feature to eliminate the us e of cro ss-over cable, and the two fiber ports operate at 100Mbps full-duplex (default) . User mode control per port through the MNS software is also the same.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 14 www Garre t t C om c om .. 1 3 5 7 10/100 L F/ ACT TX RX L K ACT F/ TX RX L ACT F/ TX LK RX ACT F/ TX RX L K ACT F/ fiber modules except for the 10Mb speed. For ports numbering, ports 1, 2, 5, 6 are present, ports 3, 4.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 15 www Garre t t C om c om .. 2.2.9 Packet Prioritization, 802.1p QOS Quality of Service means providing consistent predictable data delivery to users from datagram paths that go all across a network.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 16 www Garre t t C om c om .. its free buffer queue space is low, the Switch prevents more frames from entering by forcing a collision signal on all receiving half-duplex ports in order to stop incoming traffic.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 17 www Garre t t C om c om .. 2.3 Features and Benefits Managed switching for high performance Eth ernet LANs Magnum 6K25e Switches provide non-blocking (all ports can run at full speed at once) performance with standard Managed Networks Software (MNS-6K) included.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 18 www Garre t t C om c om .. client for time-of-day; BootP and DHCP c lient for IP configuring, and password security.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 19 www Garre t t C om c om .. 2.4 Applications Magnum 6K25e Fiber Switches offer hi gh performance and modularity . They provide the flexibility of 100Mbps fiber and c opper ports as well as Gigabit ports, with industry-standard LAN manage ment software.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 20 www Garre t t C om c om .. The Magnum 625e Managed Switch equipped with copper and optional dual Gigabit fiber ports on modular slots provide an economical and seamless solution to the requirements.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 21 www Garre t t C om com .. The Dual Giga option on each of the two slot add 4 Gigaport to handle the bandwidth requirement and 16 10/100 RJ-45 ports to feed the other needs of equipment connected to the 6K25e.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 22 www Garre t t C om com .. Locate an AC receptacle that is within six feet (2 meters) of the intended Magnum 6K25e site. The rugged metal case of the Magnum 6K25e will normally protect it from accidental damage in a lab or workplace setting.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 23 www Garre t t C om com .. 3. Connect the Transmit (TX) port (light colored post) on the Magnum PM to the Receive (RX) port of the remote device. Begin with the color-coded strand of the cable for this first TX-to-RX connection.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 24 www Garre t t C om com .. The following procedure describes how to connect a 10BASE-T or 100BASE- TX twisted pair segment to the RJ-45 por t. The procedure is the same for both unshielded and shielded twisted pair cables.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 25 www Garre t t C om com .. illuminated when the unit is powered and proper connection is established 3.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 26 www Garre t t C om com .. The various SFPs transceivers supported by GarrettCom 6K25e, D slot are- 3.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 27 www Garre t t C om com .. 3.3.1 Rack-mounting (for 19” RETMA racks), regular Magnum 6K25es Installation of a Magnum 6K25e Fiber Switch in a 19” rack is a simple procedure. The units are 1U (1.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 28 www Garre t t C om com .. D D C C B B A A D D C C B B A A D D C C B B A A Standard Flush Mount Bracket Mid-Range Mount or 5” Set-Back Bracket Rear Mount Bracket package, along with the necessary screws for attaching the brackets to the sides of the Magnum Switch unit.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 29 www Garre t t C om com .. Ethernet cabling, there is no need to power down the unit. Individual segments can be connected or disconnected without concern fo r AC power-related problems or damage to the unit.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 30 www Garre t t C om com .. 3.5 6K25e Port Module (6KPM) Installation The Magnum 6K25e Switches are normally received from the factory with all required 6KPM modules installed. There may be situations where 6KPM cards need to be added or replaced.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 31 www Garre t t C om com .. assembled together with the help of 22 Philip s-head screws. There are 7 screws located on the front-bottom and rear-top of the unit and four screws each on the sides.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 32 www Garre t t C om com .. 3.5.2 Installing 6KPM Cards in the Magnum 6K25e Up to four front-mounted 6KPM cards may be installed in one Magnum 6K25e Managed Fiber Switch unit. Follow these steps to install a 6K PM.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 33 www Garre t t C om com .. Fig. 3.5.2c Daughter Board, top view of version for 4 copper 10/100 ports. Port# 1 Can be configure d as upl ink (x) crossed ports for cascading as shown in the Fig.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 34 www Garre t t C om com .. Step 5. Once the latching connectors are aligned properly and the mounting holes are aligned with stand offs then press slowly and firmly with two fingers (as shown below in Fig.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 35 www Garre t t C om com .. brackets and 6 #256 flat head screws. The brackets and screws have been installed inside of the top c over as shown in Fig.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 36 www Garre t t C om com .. the 4 screws and bracket while holding it down firmly.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 37 www Garre t t C om com .. Pin 5 Pin 1 3.6.1 RS-232 (DB-9) Console Com port (Serial port) pin assignments.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 38 www Garre t t C om com .. Magnum 6K25e units are plug-and-play devices. There is no software configuring necessary to be done for basic ope ration at installation or for maintenance.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 39 www Garre t t C om com .. on the inside of the unit on the port module board next to the RJ45 port # 1 which it controls. It enables the port’s cable to be cascaded (X) to a 10/100Mb repeater or switching hub in the network.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 40 www Garre t t C om com .. arrive at the highest order mode that both devices can support at th at tim e.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 41 www Garre t t C om com .. Magnum 6K25e Switches implement the 802.3x flow control (non-blocking) on Full-Duplex ports, which provides for a “PA USE” packet to be transmitted to the sender when the packet buffer is nearly fille d and there is danger of lost packets.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 42 www Garre t t C om com .. 6KPM- MST, MSC 100Mb FX Multi- mod e 2 (0.4) 1300 62.5/125 50/125 -20 -23.5 -31 -31 9.0 5.5 3.0 2.0 14 12 5 4 6KPM- SS C 100Mb FX Single- mod e 18+ (0.4) 1300 9/125 -15 -31 14 28 17.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 43 www Garre t t C om com .. 5.1 Inspecting the Package and Product This section applies only to PMs shippe d as separate items, i.e., 6K25e PMs not factory installed in a Magnum 6K25e PM slot.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 44 www Garre t t C om com .. 5.2.1 6KP6-RJMST, 4@10/100Mbps RJ-45 and 2@100Mb multi-mode FX-ST “twist lock” Combo Module The Magnum 6KP6-RJMST is a co mbo 6 port module of RJ-45’s at 10/100Mbps and fiber optic ports at 100MB.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 45 www Garre t t C om com .. 6KP4-RJ10MST, 4 Port@ 10Mb ST Fiber Port 2 6 T LK RX ACT F/H TX RX LK ACT F/H TX RX LK ACT F/H TX RX .
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 46 www Garre t t C om com .. fiber ports. Whereas the 100Mb ST module allow to connect the 100Mb demand of Switch devices. It supports di stances according to the 10Bas e-FL standard i.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 47 www Garre t t C om com .. The 6KP6-RJSSC, when installed in a Magnum 6K25e Switch operates on copper at the 100m distance. The Fiber is si ngle-mode and cable lengths can be as much as 25+ Km (see Power Budget, Section 4.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 48 www Garre t t C om com .. proper connectivity with the remote devi ce when lit, and a FDX/HDX LED indicating full-duplex mode when lit (or half-duplex when off).
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 49 www Garre t t C om com .. FULL/HALF 1 ACTIVITY LINK 2 3 3 2 1 8- Port@ 100Mbps multi - mode LC fiber port 2 4 6 LK LK LK ACT F/.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 50 www Garre t t C om com .. one housing that cannot be improperly insert ed. Each port has an Activity (ACT) LED indicating packe.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 51 www Garre t t C om com .. Crossover (MDI-X) switch, which controls all ports for cascaded connection. This feature eliminates the need for a special twis ted pair crossover cable when connecting to a hub or another switch.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 52 www Garre t t C om com .. The LEDs on 6KP8-RJ45- PoE module are slightly different compared to regular (non-PoE) RJ-45 modules as shown in Fig 2. When the PoE port is in use, the PoE LED is ON when connected properly to a 803.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 53 www Garre t t C om com .. 4 3 2 4 6 LK 2 ACT F/H ACT F/H 6KP8V - 6KP8-45-2MT 6 Port @ 10/10Mb p s & 2 port @100Mb Multi -Mode Fiber port 1 3 5 10/10 L 1 F/H AC 4 FULL/HALF 1 ACTIVITY LINK 2 3 10/100 10/100 F/H When non-PoE devices are connected, the PoE LE D is OFF.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 54 www Garre t t C om com .. The Magnum 6KP8- 45SLC eight port Module is a combo module with copper and fiber (Small Form Factor) LC type fiber ports. The small size of LC connectors give an advantage of placing more ports on one module.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 55 www Garre t t C om com .. Each port has an Activity (ACT) LED indicating packets being received and a link (LK) LED indicating proper connectivity with the remote device when lit.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 56 www Garre t t C om com .. 4. If the problem is isolated to a ne twork device other than the Magnum 6K25e Switch product, it is recommended that the problem device be replaced with a known good device.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 57 www Garre t t C om com .. GarrettCom will carefully test and evaluate all returned products, will repair products that are unde.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 58 www Garre t t C om com .. APPENDIX B : Internal DC Power Supply Options B1.0 SPECIFICATIONS FOR MAG NUM 6K25E SWITCHES, DC POWE.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 59 www Garre t t C om com .. other communication companies. In addition, m any high availability equipment services, such as broad.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 60 www Garre t t C om com .. B4.1 UL Requirements for DC-powered units 1. Minimum 18AWG cable for connecti on to a Centralized DC power source. 2. Minimum 14AWG cable for c onnection to a earthing wiring.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 61 www Garre t t C om com .. With the exception of the dual DC i nput power connections and the power supply, all specifications a.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 62 www Garre t t C om com .. The -48VDC terminal block on the Magnum 6K 25e Switch, as shown in Fig C5.0 is located on the right rear of the unit and is equipped with five (5) screw-down lead posts.
Magnum 6K25e Gigabit Fiber Switch Installation and User Guide (10/07) 63 www Garre t t C om com .. Dual-Src24V for regular models with no ON-OFF switch Or Dual-Src125V-Switch for models with the ON-OFF switch C7.0 OPERATION Operation of the Dual-Source Magnum 6Ks-48VDC, 24VDC and 125VDC Switch models are identical to that of the standard models.
Ein wichtiger Punkt beim Kauf des Geräts GarrettCom 6K25e (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie GarrettCom 6K25e noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für GarrettCom 6K25e - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von GarrettCom 6K25e reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über GarrettCom 6K25e erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon GarrettCom 6K25e besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von GarrettCom 6K25e verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit GarrettCom 6K25e. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei GarrettCom 6K25e gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.