Benutzeranleitung / Produktwartung 1024 des Produzenten GarrettCom
Zur Seite of 44
ww w Gar r ett Com com .. ww w Gar r ett Com com .. Corporate Headquarters GarrettCom, Inc. 213 Hammond Ave. Fremont, CA 94539 Phone (510) 438-9071 Fax (510) 438-9072 Website: http://www.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) i ww w Gar r ett Com com .. Magnum 1008, 1016 and 1024 and optional 48VDC, 24VDC &125VDC-powered models Workgroup Hubs Installa.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) ii ww w Gar r ett Com com .. Contacting GarrettCom, Inc Please use the mailing address, phone and fa x numbers and email address listed below: GarrettCom, Inc. 478 23 Westinghouse Driv e Fremont, CA 94539 Phone (510) 438-9071 Fax (510) 438-9072 Website: http://www.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) iii ww w Gar r ett Com com .. TABLE OF CONTENTS Page 1.0 SPECIFI CATIONS ......................................................................................................1 1.1 Technical Sp ecifications .
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) iv ww w Gar r ett Com com .. Revisions Rev D 04/02 : Included Power Budget calcul ation and Rack m ounting as well as updated Appendix B wit h 24VDC & 125VDC option. Rev C 04/01 : Change the company nam e to GarrettCom, Inc.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) iv ww w Gar r ett Com com .. The Magnum Line ETHERNET CONNECTIVITY PRODUCTS "DESIGNED AND M ANUFACTURED IN THE USA" OVERVIEW GarrettCom, Inc.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 1 ww w Gar r ett Com com .. 1.0 SPECIFICATIONS 1.1 Technical Specifications Performance Data Rate: 10Mbits / sec Partitioning: Enforced af ter 32 consecutive collisions. Reconnect: Occurs after 512 b its of error-free transmission.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 2 ww w Gar r ett Com com .. Power Supply (Internal) AC Power Connector: IEC-type, male recessed, rear of chassis Input Voltage: 90 to 260 VAC (auto-ranging) Input Frequency: 47 to 63 Hz (auto-ranging) Power Consumption: 10 watts typi cal, 20 watts max.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 3 ww w Gar r ett Com com .. 1.4 Ordering Information Magnum 1000 Workgroup Hubs Magnum 1008 Eight port 10BASE-T Hub with shielded RJ-45 connectors and front-mounted LEDs. Includes a basic AUI port in the rear; may optionally be ordered instead with an RPM or BPM in the rear port slot.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 4 ww w Gar r ett Com com .. 2.0 INTRODUCTION 2.1 Inspecting the Package and Product Examine the shipping container for obvious damage prior to installing this product; notify the carrier of any damage which you believe occurred during shipment or delivery.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 5 ww w Gar r ett Com com .. The family of Magnum 1000 Workgroup H ubs is comprised of Models 1008 (pronounced “ten oh-eight”), 1016 (“ten sixt een”) and 1024 (“ten twenty-four”).
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 6 ww w Gar r ett Com com .. Figure 2.2.1b: Rear view - Magnum 1008 Workgroup Hub with the basic AUI port As an alternative to the basic AUI por t, it is possible (at the time of initial order) to replace the basic AUI rear port with any Magnum Port Module (PM).
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 7 ww w Gar r ett Com com .. Figure 2.2.2b: Front view - Magnum 1024 Workgroup Hub In the rear, the basic AUI (standard fe male) port, shown in Figure 2.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 8 ww w Gar r ett Com com .. 2.3 Internal Connections, basic AUI Port and Port Modules Figure 2.3a shows the internal layout of the Magnum 1008 for each of the two rear port configuration options (see section 2.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 9 ww w Gar r ett Com com .. Figure 2.3b: Model 1024 Int ernal Connections, Basic AUI port and Bonus Port 2.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 10 ww w Gar r ett Com com .. BPMs are available for the following four Ethernet media connector types: BNC (ThinNet or 10BASE2), AUI (10BASE5 or ThickNet, DB-15 female for most transceiver connections), ST (Ethernet mu lti-mode Fiber ST), and RJ-45 (10BASE-T UTP and STP).
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 11 ww w Gar r ett Com com .. 2.4.1 RPM-BNC The Magnum RPM-BNC repeater modul e is equipped with a standard 10BASE2 coax connector. This RPM pe rforms full IEEE 802.3 repeater functionality and is used for 10BASE2 ThinNet (comm only referred to as BNC) connections.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 12 ww w Gar r ett Com com .. used with a variety of different mini-trans ceivers to provide connectivity to any media type. The RPM-AUI card is equipped with Partition (PART) and Receive (RX) LEDs.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 13 ww w Gar r ett Com com .. 2.4.4 RPM-FST (Fiber ST, Twist-l ock Connector) The Magnum RPM-FST is a multi-mode fiber optic module equipped with a dual ST-type connector. It functions as an IEEE 802.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 14 ww w Gar r ett Com com .. 2.4.6 RPM-SMF (Single-mode Fiber) The Magnum RPM-SMF is a single-mode fiber optic module equipped with a dual ST-type connector. It functions as a full repeater to support single-mode fiber networks.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 15 ww w Gar r ett Com com .. 2.4.7 RPM-TP (T wisted Pair) The Magnum RPM-TP card supports Ethern et twisted pair segments of any standard length. It is equipped with a si ngle RJ-45 connector.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 16 ww w Gar r ett Com com .. 2.4.8 BPM-BNC The Magnum BPM-BNC bridge module is equipped with a standard 10BASE2 coax connector. This BPM is self-learning and filters and forwards packets at full Ethernet wire speed.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 17 ww w Gar r ett Com com .. 2.4.10 BPM-FST The Magnum BPM-FST is a multi-mode fiber optic local-bridge module equipped with a dual ST-type connector. It is self-learning and filters and forwards packets at full Ethernet wire speed.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 18 ww w Gar r ett Com com .. 2.4.12 Special Option -- Second Bonus Port (Models 1016 and 1024) In special cases, it may be desirable to configure the Magnum 1016 or 1024 Workgroup Hub with a second Port Module.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 19 ww w Gar r ett Com com .. 2.5 Features and Benefits ! Low cost, stand-alone 10BASE-T connectivity Operating in a stand-alone environ.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 20 ww w Gar r ett Com com .. 2.6 Applications Magnum 1000 Workgroup Hubs offer a great deal of flexibility and are easily used within a variety of Ethernet environments.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 21 ww w Gar r ett Com com .. When network performance and bandwid th are an issue, Magnum 1000’s can be configured with a Bridge Port Module, as shown in Figure 2.6c. In this diagram, Figure 2.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 22 ww w Gar r ett Com com .. 3.0 INSTALLATION This section gives instructions for installing the Magnum 1000 Workgroup Hubs, and for connecting the various Ethernet media. 3.1 Table-Top or Rack-Mount Installation of a Magnum 1000 Workgroup Hub is a very simple procedure.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 23 ww w Gar r ett Com com .. 3.3 Ethernet Media Con nections The Magnum 1000 workgroup Hub may be used as a stand-alone hub serving the needs of a small to medium size workgroup or may be connected to a larger network environment.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 24 ww w Gar r ett Com com .. NOTE: Port 1 of the Magnum 1000 Workgroup Hub (and the Magnum RPM-TP and BPM-TP ) are equipped with a cross-over slide switch to accomm odate repeater-to-repeater connections wit hout special cross-over connectors.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 25 ww w Gar r ett Com com .. Table 3.3.2: AUI Pin Assignments Pin Function Pin Function 1 Control In Circuit Shield 10 Data Out Circuit.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 26 ww w Gar r ett Com com .. 2. Wipe clean the ends of the dual connect ors with a soft cloth or lint-free lens tissue dampened in alcohol. Make certain the connectors are clean before connecting.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 27 ww w Gar r ett Com com .. Magnum 3000 Stackable Hub GARRET T 3.3.8 Power Budget Calculations for Magnum 1000 Series RPM’s with Fiber Media Receiver Sensitivity and Transmitter Power are the parameters necessary to compute the power budget.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 28 ww w Gar r ett Com com .. Ma g num 1000 Workgroup Hub 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 1 9 20 21 22 23 2 4 Ma g num 1000.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 29 ww w Gar r ett Com com .. Collisions: W hen carrier is detected simultaneously on multiple ports, a jam pattern is generated on each port to create a collision condition. When a collision signal from one port is detected, it generates a jam pattern to the other ports.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 30 ww w Gar r ett Com com .. 4.2 Magnum 1000’s with BPM Local Bridge Functionality When configured with a BPM, a Magnum 1000 Workgroup Hub and its attached devices are bridge-isolated from the network segment connected through the BPM.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 31 ww w Gar r ett Com com .. there. This happens wh en a node first sends Figure 4.2c: Extern al Packet Forwarded a packet upon bridge initialization. Note, therefore, that the address table learns only internal addresses, i.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 32 ww w Gar r ett Com com .. directed outside the segment. A BPM connecting this segment to the rest of the network, as shown in Figure 4.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 33 ww w Gar r ett Com com .. 5.0 TROUBLESHOOTING All Magnum Ethernet products are designed to provide reliability and consistently high performance in all network environments.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 34 ww w Gar r ett Com com .. 5.2 When Calling for A ssistance Please be prepared to provide the following information. 1. A complete description of the problem, including the following points: a.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 35 ww w Gar r ett Com com .. GarrettCom will carefully test and ev aluate all returned products, will repair products that are under wa.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 36 ww w Gar r ett Com com .. APPENDIX B : Internal DC Power Supply Option B1.0 SPECIFICATIONS - FOR MAGNUM 1000 WORKGROUP HUBS Power Su.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 37 ww w Gar r ett Com com .. B3.0 APP LICATIONS Magnum 1000 Workgroup Hubs are easily installed in a variety of applications where -48VDC, 24VDC & 125VDC power is used as the prim ary power source.
Magnum 1000 Workgroup Hubs Instal lation and User Guide (04/ 02) 38 ww w Gar r ett Com com .. Note: Before connecting to Terminal Block of –48VDC, 24VDC or 125VDC, always use a digital voltmeter to measure th e output voltage of the power supply and determine the lead which is more “+ ve potential Lead”.
Ein wichtiger Punkt beim Kauf des Geräts GarrettCom 1024 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie GarrettCom 1024 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für GarrettCom 1024 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von GarrettCom 1024 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über GarrettCom 1024 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon GarrettCom 1024 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von GarrettCom 1024 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit GarrettCom 1024. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei GarrettCom 1024 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
