Benutzeranleitung / Produktwartung 190-01771-00_0A des Produzenten Garmin
Zur Seite of 24
Alpha ® 100 with T5 Owner’s Manual June 2014 190-01771-00_0A Printed in Taiwan.
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements.
Table of Contents Getting Started ............................................................... 1 Setting Up the Alpha System ..................................................... 1 Device Overviews ..................................................
Controlling a VIRB Action Camera with Your Handheld Device ................................................................................. 11 Customizing Your Device ............................................ 11 Customizing the Main Menu .........
Getting Started WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Setting Up the Alpha System NOTICE Avoid using a high-powered radio (greater than 5 watts) in close proximity to the device.
Charging the Handheld Device NOTICE To prevent corrosion, thoroughly dry the USB port, the weather cap, and the surrounding area before charging or connecting to a computer. You should fully charge the battery before you use the device for the first time.
not own the dog collar device ( Adding a Dog Using the Track and Train Codes ). NOTE: This feature varies based on dog collar device type and feature availability in your area.
If you are experiencing interference from other collars or handheld devices in the area, you might need to change the ID for the dog. 1 Select Dog List .
Dog Status Icons Sitting Running On point Treed Unknown* *The unknown status icon indicates that the collar has not acquired a satellite signal and that the handheld device cannot determine the location of the dog. Dog Tracking Compass To open the dog tracking compass, select .
Training Methods NOTE: Training features are not available in all areas for tracking collars. Tone : Activates an audible tone instead of stimulation. A tone can be used as either a positive or negative training cue, depending on your training program.
Changing Your Contact ID If you are experiencing interference from other collars or handheld devices in the area, you might need to change the contact ID for your handheld device. 1 Select Setup > Contacts > Pairing Setup > ID . 2 Select a contact ID that is not yet assigned to another device in the area.
Increasing the Accuracy of a Waypoint Location You can refine a waypoint location for more accuracy. When averaging, the device takes several readings at the same location and uses the average value to provide more accuracy. 1 Select > Waypoint Manager .
2 Select a track. 3 Select Elevation Plot . Navigating to the Start of a Track You can navigate back to the beginning of a track. This can be helpful when finding your way back to camp or the trail head. 1 Select > Track Manager > Current Track > View Map .
course. The scale  refers to the distance between dots à on the course deviation indicator, which tell you how far off course you are. Where To? Menu You can use the Where To? menu to find a destination to navigate to. Not all Where To? categories are available in all areas and maps.
Changing the Satellite View By default, the satellite view is with North at the top. You can change the view of the satellites to be oriented with your current track toward the top of the screen. 1 Select > Satellite > . 2 Select Track Up . Turning Off GPS Select > Satellite > > Use With GPS Off .
Day Highlight Color : Sets the color for selections made when in day mode. Night Highlight Color : Sets the color for selections made when in night mode. Setting the Device Tones You can customize tones for messages, keys, warnings, and alarms. 1 Select Setup > Tones .
Pressure Trending : Sets how the device records pressure data. Save Always records all pressure data, which can be helpful when you are watching for pressure fronts.
• Reduce the backlight timeout ( Adjusting the Backlight Timeout ). • Select a longer duration for your handheld update rate ( Changing Your Handheld Update Rate ).
Connecting the Handheld Device to a Computer NOTICE To prevent corrosion, thoroughly dry the USB port, the weather cap, and the surrounding area before charging or connecting to a computer. 1 Lift the weather cap À . 2 Plug the small end of the USB cable into the mini-USB connector Á on the device.
T5 Battery Replacement Instructions T5 Components À Back plate Á Power key  Battery connector à Battery cover Ä Battery Å Power connector Removing the Old Battery Before you replace the battery, you must remove all dirt, water, and debris from the device.
2 Pry off the cover. 3 Remove the screw  securing the VHF antenna to the back plate. 4 Pull the length of the antenna from the antenna guide to remove the old antenna. 5 Loop the antenna guide around the collar strap, and thread the new VHF antenna through the guide.
Speed - Overall Avg. : The average speed while moving and stopped since the last reset. Sunrise : The time of sunrise based on your GPS position. Sunset : The time of sunset based on your GPS position. Time of Day : The current time of day based on your current location and time settings (format, time zone, daylight saving time).
Index A accessories 1, 15 alarms clock 10 marine 13 proximity 10 tones 12 alerts 6 dog 4 location 5 almanac 10 altimeter 12 calibrating 10 ANT+ sensors 15 pairing.
www.garmin.com/support +43 (0) 820 220230 + 32 2 672 52 54 0800 770 4960 1-866-429-9296 +385 1 5508 272 +385 1 5508 271 +420 221 985466 +420 221 985465 + 45 4810 5050 + 358 9 6937 9758 + 331 55 69 33 .
Ein wichtiger Punkt beim Kauf des Geräts Garmin 190-01771-00_0A (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Garmin 190-01771-00_0A noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Garmin 190-01771-00_0A - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Garmin 190-01771-00_0A reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Garmin 190-01771-00_0A erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Garmin 190-01771-00_0A besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Garmin 190-01771-00_0A verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Garmin 190-01771-00_0A. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Garmin 190-01771-00_0A gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
