Benutzeranleitung / Produktwartung 190-01674-00_0B des Produzenten Garmin
Zur Seite of 24
D2 ™ Pilot Owner’s Manual March 2014 190-01674-00_0B Printed in Taiwan.
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements.
Table of Contents Introduction .................................................................... 1 Getting Started ........................................................................... 1 Charging the Device ...................................
Foot Pod Calibration ........................................................... 14 Calibrating Your Foot Pod by Distance ............................... 14 Calibrating Your Foot Pod by GPS ..................................... 14 Calibrating Your Foot Pod Manually .
Introduction WARNING Always consult your physician before you begin or modify any exercise program. See the Important Safety and Product Information guide in the product box for product warnings and other important information.
Low Power Mode The compass page displays the time of day À , direction of travel in degrees Á , and cardinal direction  . The altimeter page displays the time of day À , pressure altitude Á , and barometric pressure  . The temperature page displays the time of day À , temperature Á , and density altitude  .
7 Select an option: • Select Pause Track to pause tracking. • Select Save Track to save your track. • Select Clear Track to erase the track without saving. • Select Stop GPS to turn off GPS without deleting your track. Stopping GPS 1 Select the action key.
Projecting a Waypoint You can create a new location by projecting the distance and bearing from a marked location to a new location. 1 Select the action key. 2 Select Waypoints . 3 Select a waypoint. 4 Select Project . 5 Follow the on-screen instructions.
7 Select an option: • Select Pause Track to pause tracking. • Select Save Track to save your track. • Select Clear Track to erase the track without saving. • Select Stop GPS to turn off GPS without deleting your track. Saving the Current Track 1 Select the action key.
Compass The device has a 3-axis compass with automatic calibration. The compass features and appearance change depending on the profile you are using ( Changing Profiles ), whether GPS is enabled, and whether you are navigating to a destination. You can also manually change the compass settings ( Compass Settings ).
Marking and Starting Navigation to a Man Overboard Location You can save a man overboard (MOB) location, and automatically start navigation back to it. You can customize the hold function of the or key to access the MOB function quickly ( Customizing the Arrow Keys ).
4 Complete one or more actions to enter your jump information: • Select DIP to set a waypoint for the desired landing location. • Select Drop Alt to set the drop altitude AGL (in feet) when the jumpmaster exits the aircraft. • Select Open Alt to set the open altitude AGL (in feet) when the jumpmaster opens the parachute.
Alerts You can set the device to alert you in many different situations where your awareness of the surrounding conditions or other data is important. There are three types of alerts: event alerts, range alerts, and recurring alerts. Event alert : An event alert notifies you once.
Setup Item Available Settings and Information Units You can change the units of measure for data such as distance, elevation, and temperature ( Changing the Units of Measure ). Pos. Format You can change how your position data appears ( Position Format Settings ).
3 Select Messages or Keys . 4 Select an option. Display Settings Select Setup > Display . Backlight : Adjusts the backlight level and the length of time before the backlight turns off. Contrast : Adjusts the screen contrast. Map Settings Select Setup > Map .
• Select Setup > Units to change units of measurement. For example, you can record your biking distance in kilometers instead of miles. • Customize the hold function of your arrow keys for your activity ( Customizing the Arrow Keys ). • Select Setup > Fitness > Auto Lap to set your lap distance.
4 Wrap the strap around your chest, and connect the strap hook à to the loop. The Garmin logo should be right-side up. 5 Bring the device within range (3 m) of the heart rate monitor. After you put on the heart rate monitor, it is on standby and ready to send data.
Setting the Foot Pod Mode You can set your device to use foot pod data instead of GPS data to calculate pace. 1 Select the action key. 2 Select Setup > Fitness > Foot Pod Speed . 3 Select an option: • Select Indoor when you are training indoors without GPS.
Cleaning the Device 1 Wipe the device using a cloth dampened with a mild detergent solution. 2 Wipe it dry. Specifications Battery type 500 mAh Lithium-ion battery Battery life Up to 5 weeks Water resistance Water resistant to 164 ft. (50 m) NOTE: The watch is designed for surface swimming.
BATTERY : The remaining battery power. BEARING : The direction from your current location to a destination. You must be navigating for this data to appear. CADENCE : The revolutions of the crank arm or strides per minute. Your device must be connected to a cadence accessory.
NEXT DEST (next destination) : The next point on the route. You must be navigating for this data to appear. NEXT DIST (distance to next waypoint) : The remaining distance to the next waypoint on the route. You must be navigating for this data to appear.
Zone % of Maximum Heart Rate Perceived Exertion Benefits 4 80–90% Fast pace and a bit uncomfortable, breathing forceful Improved anaerobic capacity and threshold, improved speed Zone % of Maximum He.
Index A accessories 15 adventures 5 airport 14 nearest 5 alarms 9 clock 8 proximity 9 alerts 9 location 9 almanac hunting and fishing 9 sunrise and sunset 9 altimeter.
www.garmin.com/support +43 (0) 820 220230 + 32 2 672 52 54 0800 770 4960 1-866-429-9296 +385 1 5508 272 +385 1 5508 271 +420 221 985466 +420 221 985465 + 45 4810 5050 + 358 9 6937 9758 + 331 55 69 33 .
Ein wichtiger Punkt beim Kauf des Geräts Garmin 190-01674-00_0B (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Garmin 190-01674-00_0B noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Garmin 190-01674-00_0B - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Garmin 190-01674-00_0B reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Garmin 190-01674-00_0B erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Garmin 190-01674-00_0B besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Garmin 190-01674-00_0B verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Garmin 190-01674-00_0B. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Garmin 190-01674-00_0B gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
